[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: vmlinux-3.0.0-1-4kc-malta kernel panic





2011/8/13 Diego Marr�span dir="ltr"><eljedi@gmail.com>


On Sat, Aug 13, 2011 at 12:32 AM, Geert Stappers <stappers@stappers.nl> wrote:
On Fri, Aug 12, 2011 at 07:13:27PM +0200, Diego Marr�rote:
> Hello!
>
> I'm new on mips world, and new to the list. And i'm not pretty sure if this
> is the correct one to send this question.
>
>
> I'm testing �vmlinux-3.0.0-1-4kc-malta kernel, on qemu-mipsel. I run it with
> this line:
>
> ./qemu-system-mipsel -M malta -m 128 -cpu 4Kc -kernel $KERNEL -hda debian_wheezy_mipsel_std.qcow2 -append "root=/dev/sda1" -nographic
>
> This same line, but running it with $KERNEL=vmlinux-2.6.32-5-4kc-malta works
> fine. (yes i update from squeeze)
>
> but with vmliux-3.0 I get this kernel panic:
>
> [ � �0.000000] Initializing cgroup subsys cpu
> [ � �0.000000] Linux version 3.0.0-1-4kc-malta (Debian 3.0.0-1) ( ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 Mon Jul 25 14:35:25 UTC 2011
> [ � �0.000000] Config serial console: console=ttyS0,38400n8r
> [ � �0.000000] bootconsole [early0] enabled
> [ � �0.000000] CPU revision is: 00018000 (MIPS 4Kc)
> [ � �0.000000] Determined physical RAM map:
> [ � �0.000000] �memory: 00001000 @ 00000000 (reserved)
> [ � �0.000000] �memory: 000ef000 @ 00001000 (ROM data)
> [ � �0.000000] �memory: 00616000 @ 000f0000 (reserved)
> [ � �0.000000] �memory: 078fa000 @ 00706000 (usable)
> [ � �0.000000] Wasting 57536 bytes for tracking 1798 unused pages
> [ � �0.000000] Initrd not found or empty - disabling initrd
> [ � �0.000000] Zone PFN ranges:
> [ � �0.000000] � DMA � � �0x00000000 -> 0x00001000
> [ � �0.000000] � Normal � 0x00001000 -> 0x00008000
> [ � �0.000000] Movable zone start PFN for each node
> [ � �0.000000] early_node_map[1] active PFN ranges
> [ � �0.000000] � � 0: 0x00000000 -> 0x00008000
> [ � �0.000000] Built 1 zonelists in Zone order, mobility grouping on. �Total pages: 32512
> [ � �0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,38400n8r
> [ � �0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
> [ � �0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> [ � �0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> [ � �0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
> [ � �0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
> [ � �0.000000] Memory: 122712k/123880k available (4253k kernel code, 1168k reserved, 1192k data, 236k init, 0k highmem)
> [ � �0.000000] NR_IRQS:256
> [ � �0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000080, epc == 80655a3c, ra == 80655a1c
> [ � �0.000000] Oops[#1]:
> [ � �0.000000] Cpu 0
> [ � �0.000000] $ 0 � : 00000000 10000000 00000000 1bdc0001
> [ � �0.000000] $ 4 � : 00000018 10000000 00000001 00000000
> [ � �0.000000] $ 8 � : 00000000 007cffff 87c09000 00000000
> [ � �0.000000] $12 � : 00000001 87c0679c ffffffff fffffffc
> [ � �0.000000] $16 � : 8068042e 80680000 80690000 80690000
> [ � �0.000000] $20 � : 00000000 00000000 00000000 00000000
> [ � �0.000000] $24 � : 00000000 00000000
> [ � �0.000000] $28 � : 80618000 80619ec0 00000000 80655a1c
> [ � �0.000000] Hi � �: 00000000
> [ � �0.000000] Lo � �: 00000000
> [ � �0.000000] epc � : 80655a3c arch_init_irq+0x38/0x168
> [ � �0.000000] � � Not tainted
> [ � �0.000000] ra � �: 80655a1c arch_init_irq+0x18/0x168
> [ � �0.000000] Status: 10000002 � �KERNEL EXL
> [ � �0.000000] Cause : 0080000c
> [ � �0.000000] BadVA : 00000080
> [ � �0.000000] PrId �: 00018000 (MIPS 4Kc)
> [ � �0.000000] Modules linked in:
> [ � �0.000000] Process swapper (pid: 0, threadinfo=80618000, task=8061da80, tls=00000000)
> [ � �0.000000] Stack : 80680000 80690000 80690000 00000000 00000000 8068042e 80680000 806527d8
> [ � �0.000000] � � � � 00000000 8067c1f8 ffffffff 80695cf4 8065221c 00000000 80680408 00000000
> [ � �0.000000] � � � � 8067c1f8 00000000 00000000 00000000 00000000 00000000 00000000 8051c090
> [ � �0.000000] � � � � 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ � �0.000000] � � � � 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ � �0.000000] � � � � ...
> [ � �0.000000] Call Trace:
> [ � �0.000000] [<80655a3c>] arch_init_irq+0x38/0x168
> [ � �0.000000] [<806527d8>] start_kernel+0x250/0x434
> [ � �0.000000] [<8051c090>] kernel_entry+0x0/0xa0
> [ � �0.000000]
> [ � �0.000000]
> [ � �0.000000] Code: 8c42e044 �3c031bdc �24630001 <ac430080> 24030001 3c028069 �081956a0 �ac43e040 �8c43e01c
> [ � �0.000000] Disabling lock debugging due to kernel taint
> [ � �0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
>
>
> Any idea?

Which version of qemu-system-mipsel is used?







>>Oops, that is a short answer.
>>Let's see if the _next message_ in this thread is a better one.

sorry :S

I'm using 14.1 on fc14
Also i Tried 13 with the same results


>>The Debian archive had three versions of QEMU 14.1.
>>The latest, 14.1+dsfg-3, has a mipsel bug (#562887) fixed.

>>And in exprimental there is version 0.15.0~rc2+dfsg-1


>>About kernels
>> �vmlinux-2.6.32-5-4kc-malta � : good
>> �vmlinux-3.0.0-1-4kc-malta � �: bad

Why 3.0 is a bad one? Which are the differences between them?�


> thanks!

HtH


;)
Groeten
Geert Stappers
--
> And is there a policy on top-posting vs. bottom-posting?
Yes.


--
To UNSUBSCRIBE, email to debian-mips-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20110812223250.GY2552@gpm.stappers.nl" target="_blank">http://lists.debian.org/20110812223250.GY2552@gpm.stappers.nl




Reply to: