Re: [RFH] Octeon support for debian.org machines
Hi,
On Thu Mar 04, 2010 at 16:42:57 +0100, Florian Fainelli wrote:
> Hi,
>
> On Thursday 04 March 2010 16:10:42 Martin Zobel-Helas wrote:
> > Hi,
> >
> > [please CC me, i am not subscribed to the list]
> >
> > After that, the machine seems dead.
> >
> > Any help how to proceed appreciated.
>
> Make sure that your kernel does not include a .notes section. I ran into the
> same problem on my evaluation board a while ago. To strip down this section
> use the following command:
>
> # Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes
> section
> $(TARGET_CROSS)strip -R .notes vmlinux.elf -o fixed-vmlinux.elf
wow, you made my day, well, parts of it. I am now stuck at:
Movidis x16> setenv ipaddr 192.168.2.16
Movidis x16> setenv serverip 192.168.2.10
Movidis x16> setenv ethact octeth2
Movidis x16> tftpboot 0x0 vmlinux-2.6.33-dsa-octeon-strip
octeth2: Up 1Gbs Full duplex, (port 2)
Using octeth2 device
TFTP from server 192.168.2.10; our IP address is 192.168.2.16
Filename 'vmlinux-2.6.33-dsa-octeon-strip'.
Load address: 0x100000
Loading: ################################
done
Bytes transferred = 4483776 (446ac0 hex), 13514 Kbytes/sec
Movidis x16> bootoctlinux 100000 numcores=16 mem=0 root=/dev/sda2
argv[2]: numcores=16
argv[3]: mem=0
argv[4]: root=/dev/sda2
ELF file is 64 bit
Allocated memory for ELF segment: addr: 0x1100000, size 0x485ad0
Loading .text @ 0x81100000 (0x2a8820 bytes)
Loading __ex_table @ 0x813a8820 (0x5f20 bytes)
Loading .rodata @ 0x813af000 (0xf3318 bytes)
Loading .pci_fixup @ 0x814a2318 (0xe70 bytes)
Loading __ksymtab @ 0x814a3188 (0xa530 bytes)
Loading __ksymtab_gpl @ 0x814ad6b8 (0x48b0 bytes)
Loading __kcrctab @ 0x814b1f68 (0x5298 bytes)
Loading __kcrctab_gpl @ 0x814b7200 (0x2458 bytes)
Loading __ksymtab_strings @ 0x814b9658 (0x10939 bytes)
Loading __param @ 0x814c9f98 (0x1068 bytes)
Loading .data @ 0x814cc000 (0x411e0 bytes)
Loading .init.text @ 0x8150e000 (0x21d04 bytes)
Loading .init.data @ 0x8152fd08 (0xd4f8 bytes)
Loading .exit.text @ 0x8153d200 (0x1068 bytes)
Loading .data.percpu @ 0x8153f000 (0x3480 bytes)
Clearing .bss @ 0x81544000 (0x41ad0 bytes)
## Loading Linux kernel with entry point: 0x81105eb0 ...
Bootloader: Done loading app on coremask: 0xffff
Linux version 2.6.33-dsa-octeon (root@swarm) (gcc version 4.4.3 (Debian 4.4.3-2) ) #1 SMP Fri Feb 26 09:47:38 UTC 2010
CVMSEG size: 1 cache lines (128 bytes)
bootconsole [early0] enabled
CPU revision is: 000d0003 (Cavium Octeon)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000000035000 @ 000000000150e000 (usable)
memory: 000000000e800000 @ 0000000001600000 (usable)
memory: 0000000060000000 @ 0000000020000000 (usable)
memory: 0000000010000000 @ 0000000410000000 (usable)
Wasting 301840 bytes for tracking 5390 unused pages
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x0000150e -> 0x00420000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x0000150e -> 0x00001543
0: 0x00001600 -> 0x0000fe00
0: 0x00020000 -> 0x00080000
0: 0x00410000 -> 0x00420000
PERCPU: Embedded 11 pages/cpu @a800000020000000 s13440 r8192 d23424 u65536
pcpu-alloc: s13440 r8192 d23424 u65536 alloc=16*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 459134
Kernel command line: bootoctlinux 100000 numcores=16 root=/dev/sda2 console=ttyS0,115200
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Primary data cache 8kB, 64-way, 1 sets, linesize 128 bytes.
Memory: 1831664k/2072788k available (2722k kernel code, 240400k reserved, 1426k data, 212k init, 0k highmem)
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:152
Console: colour dummy device 80x25
Calibrating delay using timer specific routine.. 1001.70 BogoMIPS (lpj=2003401)
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
SMP: Booting CPU01 (CoreId 1)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU02 (CoreId 2)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU03 (CoreId 3)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU04 (CoreId 4)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU05 (CoreId 5)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU06 (CoreId 6)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU07 (CoreId 7)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU08 (CoreId 8)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU09 (CoreId 9)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU10 (CoreId 10)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU11 (CoreId 11)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU12 (CoreId 12)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU13 (CoreId 13)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU14 (CoreId 14)...
CPU revision is: 000d0003 (Cavium Octeon)
SMP: Booting CPU15 (CoreId 15)...
CPU revision is: 000d0003 (Cavium Octeon)
Brought up 16 CPUs
NET: Registered protocol family 16
Enabling Octeon big bar support
PCI Status: PCI-X 64-bit
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
pci 0000:00:02.0: BAR 15: assigned [mem 0x11b00f0000000-0x11b00f01fffff pref]
pci 0000:00:02.0: BAR 14: assigned [mem 0x11b00f0200000-0x11b00f02fffff]
pci 0000:00:02.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:01:06.0: BAR 6: assigned [mem 0x11b00f0000000-0x11b00f01fffff pref]
pci 0000:01:06.0: BAR 3: assigned [mem 0x11b00f0200000-0x11b00f020ffff 64bit]
pci 0000:01:06.0: BAR 3: set to [mem 0x11b00f0200000-0x11b00f020ffff 64bit] (PCI address [0xf0200000-0xf020ffff]
pci 0000:01:06.0: BAR 1: assigned [mem 0x11b00f0210000-0x11b00f0213fff 64bit]
pci 0000:01:06.0: BAR 1: set to [mem 0x11b00f0210000-0x11b00f0213fff 64bit] (PCI address [0xf0210000-0xf0213fff]
pci 0000:01:06.0: BAR 0: assigned [io 0x4000-0x40ff]
pci 0000:01:06.0: BAR 0: set to [io 0x4000-0x40ff] (PCI address [0x4000-0x40ff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0x11b00f0200000-0x11b00f02fffff]
pci 0000:00:02.0: bridge window [mem 0x11b00f0000000-0x11b00f01fffff pref]
PCI: Enabling device 0000:00:02.0 (0000 -> 0003)
Switching to clocksource OCTEON_CVMCOUNT
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 3578
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
octeon_rng octeon_rng: Octeon Random Number Generator
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1180000000800 (irq = 58) is a OCTEON
mdio-octeon: probe of mdio-octeon.0 failed with error -5
I2O subsystem v1.325
i2o: max drivers = 8
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.13
PCI: Enabling device 0000:01:06.0 (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B0: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1068 B0, FwRev=010a0000h, Ports=1, MaxQ=511, IRQ=62
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 12, phy 1, sas_addr 0xe241a0255857837
scsi 0:0:0:0: Direct-Access ATA ST3250310NS SN04 PQ: 0 ANSI: 5
i8042.c: No controller found.
Trying to free nonexistent resource <0000000000000060-000000000000006f>
mice: PS/2 mouse device common for all mice
cavium-ethernet 1.9
Interface 0 has 4 ports (RGMII)
Interface 1 has 4 ports (RGMII)
Interface 2 has 4 ports (NPI)
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
cvmx_helper_board_get_mii_address: Unknown board type 10001
TCP cubic registered
Bootbus flash: Setting flash for 2MB flash at 0x1fa00000
Failed to register MTD device for flash
turn off boot console early0
And then: dead. i wonder why it turns off boot console....
--
Martin Zobel-Helas <zobel@debian.org> | Debian System Administrator
Debian & GNU/Linux Developer | Debian Listmaster
Public key http://zobel.ftbfs.de/5d64f870.asc - KeyID: 5D64 F870
GPG Fingerprint: 5DB3 1301 375A A50F 07E7 302F 493E FB8E 5D64 F870
Reply to: