New installer
Martin Michlmayr a écrit :
* Mark <strandedinnz@yahoo.com.au> [2008-08-29 01:49]:
I kind of killed my Debian install on my Qube2 ;-) So I had a go at
installing Lenny direct and it does't go ... so is it best to install
Etch (which works) and then upgrade to Lenny ?
Good timing because I was just going to ask for beta testers of the
lenny installer. Can you try the image from
http://newpeople.debian.org/~aurel32/d-i/images/mipsel/
If it doesn't work, please let us know so we can fix it.
Unfortunaetly I don't have access to my Cobalt hardware at the moment,
so I cannot test it myself.
Hello,
i just had a look to the new installer and had a little problem ;
when i choose nfs after net booting my qube2, it hangs with a little
message : UNIT BOOT FAILED !
So, i watched my logs :
OK for dhcp and nfs :
Aug 30 13:44:12 vivace dhcpd: BOOTREPLY for 10.0.0.55 to cobalt
(00:10:e0:00:f1:04) via eth0
Aug 30 13:44:12 vivace mountd[8040]: NFS mount of /nfsroot attempted
from 10.0.0.55
Aug 30 13:44:17 vivace mountd[8040]: /nfsroot has been mounted by 10.0.0.55
And there is the serial output of the qube :
Decompressing done
Executing bootloader kernel...
Decompressing - done.
[ "CoLo" v1.22 ]
stage2: 88fa0000-89000000
cpu: clock 250.000MHz
pci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:f1:04}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: DISCOVER
net: interface down
no response
script aborted <1>
Did i forget anything ?
Thanks
JF
Reply to: