Hello *,
currently I am collecting informations about ARM/MIPS CPUs to build an
industrial table computer. The currently most performant ARM is a
ATM1176JZF-S based one from Freescale or Samsung with ~533MHz.
So this woulöd be the limit for NOW.
OK, I now, MIPS are availlable in 600 MHz and 800 MHz versions but can
anyone tell me WHICH manufacturer sell Of-The-Shelf CPUs?
Note: My table computer will be equiped with TWO 7.4V/4Ah Li+ accus
from which I like to get an autonomie of 336 hours in standby
and 8 hours in action including a 10" TFT display... Also it
will have an open Bus for I²C/CAN/1-Wire plus other features
not found on normal Laptops/PCs.
Most important thing is, it must entirely work with software
which fit the DFSG. No "contrib" of "non-free" required.
Good, I need at least an Evaluation Board plus 2-5 CPUs for my
experimental PCBs.
Note: I have gotten am used InfraRed Welding System Aoyue 720 from
eBay for 350€ which would normaly cost arround 2000€.
Better would be, if i can get a Aoyue 9000 but NEW it cost
10.000€. -- Good-Night!
Thanks, Greetings and nice Day/Evening
Michelle Konzack
Systemadministrator
24V Electronic Engineer
Tamay Dogan Network
Debian GNU/Linux Consultant
--
Linux-User #280138 with the Linux Counter, http://counter.li.org/
##################### Debian GNU/Linux Consultant #####################
Michelle Konzack Apt. 917 ICQ #328449886
+49/177/9351947 50, rue de Soultz MSN LinuxMichi
+33/6/61925193 67100 Strasbourg/France IRC #Debian (irc.icq.com)
Attachment:
signature.pgp
Description: Digital signature