[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: O2 boot


On Tue Mar 11 13:57 , Ulrich Teichert <krypton@ulrich-teichert.org> sent:

>Hi,
>
>[del]
>> > unsetenv netaddr
>> > bootp():
>>Setting $netaddr to 192.168.234.33 (from server )
>>Unable to execute bootp()::  invalid argument
>[del]
>
>Have you tried to:
>
># echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc
># echo "2048 32767" > /proc/sys/net/ipv4/ip_local_port_range
>
>On the server side? I wasn't able to get my O² to boot otherwise, despite
>the fact that I have a 2.6.20 kernel running,
>

Thank you very much, that fixed thee boot problem, but now the kernel boots but
is hangs during boot. 
Here is what happens, 

tip32: IP32 Linux tftpboot loader 0.3.10
Loading program segment 1 at 0x80004000, size = 0x0 4a9086
Zeroing memory at 0x804ad086, size = 0x3ceca
Kernel entry point is 0x8046c000
Copying initrd from 0x81bbe5d2 to 0x804ea000 (0x35d249 bytes)...
Initrd copied.
Starting kernel...
Linux version 2.6.22-3-r5k-ip32 (Debian 2.6.22-6) (maks@debian.org) (gcc version
4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Thu Nov 15 06:39:11 UTC 2007
ARCH: SGI-IP32
PROMLIB: ARC firmware Version 1 Revision 10
CRIME id a rev 1 at 0x0000000014000000
CRIME MC: bank 0 base 0x0000000000000000 size 128MiB
CRIME MC: bank 2 base 0x0000000008000000 size 128MiB
CPU revision is: 00002732
FPU revision is: 00002720
Determined physical RAM map:
 memory: 0000000010000000 @ 0000000000000000 (usable)
Initial ramdisk at: 0x98000000004ea000 (3527241 bytes)
Built 1 zonelists.  Total pages: 64640
Kernel command line: rd_start=0x804ea000 rd_size=0x35d249
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Secondary cache size 256K, linesize 32 bytes.
Enabling secondary cache...
Tertiary cache present, not (yet) enabled
Synthesized TLB refill handler (35 instructions).
Synthesized TLB load handler fastpath (47 instructions).
Synthesized TLB store handler fastpath (47 instructions).
Synthesized TLB modify handler fastpath (46 instructions).
PID hash table entries: 1024 (order: 10, 8192 bytes)
Calibrating system timer... 350 MHz CPU detected
Using 175.435 MHz high precision timer.
CRIME memory error at 0x3fffffe0 ST 0x0400a828<INV,RE,REID=0x28,NONFATAL>
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Memory: 249344k/262144k available (3538k kernel code, 12472k reserved, 969k data,
264k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
NET: Registered protocol family 16
MACE PCI rev 1
registering PCI controller with io_map_base unset
SCSI subsystem initialized
MACEPCI: Master abort at 0x00004000 (C)
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3444k freed
audit: initializing netlink socket (disabled)
audit(1205299051.715:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x30
fb0: SGI GBE rev 1 @ 0x16000000 using 4096kB memory
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 53) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 59) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: SGI MACE Ethernet rev. 1
PCI: Enabling device 0000:00:01.0 (0046 -> 0047)
ahc_pci:0:1:0: Using left over BIOS settings
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec aic7880 Ultra SCSI adapter>
        aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs

PCI: Enabling device 0000:00:02.0 (0046 -> 0047)
ahc_pci:0:2:0: Using left over BIOS settings
scsi 0:0:1:0: Direct-Access     SGI      IBM DDRS-39130W  S95D PQ: 0 ANSI: 2
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
 target0:0:1: Beginning Domain Validation
 target0:0:1: wide asynchronous
 target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
 target0:0:1: Domain Validation skipping write tests
 target0:0:1: Ending Domain Validation
scsi 0:0:4:0: CD-ROM            TOSHIBA  CD-ROM XM-5701TA 0167 PQ: 0 ANSI: 2
 target0:0:4: Beginning Domain Validation
 target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
 target0:0:4: Domain Validation skipping write tests
 target0:0:4: Ending Domain Validation
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec aic7880 Ultra SCSI adapter>
        aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs

 target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
sd 0:0:1:0: [sda] 17781520 512-byte hardware sectors (9104 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO
or FUA
sd 0:0:1:0: [sda] 17781520 512-byte hardware sectors (9104 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO
or FUA
 sda: unknown partition table
sd 0:0:1:0: [sda] Attached SCSI disk
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Raw Set 2 keyboard as /class/input/input0
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
scsi: waiting for bus probes to complete ...
input: PS2++ Logitech Mouse as /class/input/input1
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 264k freed
cramfs: bad compressed blocksize 29091
cramfs: bad compressed blocksize 12209
request_module: runaway loop modprobe binfmt-0000
request_module: runaway loop modprobe binfmt-0000
request_module: runaway loop modprobe binfmt-0000
request_module: runaway loop modprobe binfmt-0000
request_module: runaway loop modprobe binfmt-0000

it gets to this point and just sits there, do you have any ideas?
I really appreciate the help so far.
Lee

---- Msg sent via @=WebMail - http://webmail.usu.edu/
Reply to: