Qube2 Etch Install Problems
Hello all, I have a Qube2 I am trying to get Etch running on. The Qube2 and the machine acting as my NFS server (Debian Etch) are both behind an IPCop firewall which is doing DHCP duties. I believe I have everything configured properly but my Qube2 fails at the point where it gets to the install. It just seems to die trying to load the installer. It is 4AM here and I am not thinking too straight right now, not sure if it is the lack of sleep or the massive doses of caffeine :D Anyway, below is a screen capture of the latest attempt. Any suggestions for a noob like myself to look for the problem???
Thanks
Bob
------------------------------------------
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................0M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing -#\#|#/#-#\#|#/#-#\#|#/#-#\#|## done
Executing bootloader kernel...
Decompressing -/#-#\# done.
[ "CoLo" v1.22 ]
stage2: 83fa0000-84000000
cpu: clock 250.000MHz
pci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:94:9f}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.2.31 <-- 192.168.2.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.2.31
netmask 255.255.255.0
gateway 192.168.2.1
name server 192.168.2.1
1> lcd 'Booting...' {ip-address}
1> nfs {dhcp-next-server} {dhcp-root-path} {dhcp-boot-file}
nfs: mounted "/nfsroot"
nfs: lookup "default.colo"
nfs: mode <0100644>
0KB
1KB loaded
00000321 801t
no response
1> -script
2> -serial on
2> var args ""
2> select 'BOOT SELECTION' 50 'install SSH' 'install serial' 'rescue SSH' 'rescue serial'
2> goto {menu-option}
2> var title1 'Starting the'
2> var title2 'installer (ttyS)'
2> var initrd "serial_initrd.gz"
2> goto 3
2> lcd "{title1}" "{title2}"
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.6.18-4-r5k-cobalt {initrd}
script aborted <1>
>
no response
script aborted <2>
1> execute
ELF image invalid
--
To UNSUBSCRIBE, email to debian-mips-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: