Etch on Qube 2
Hello everyone,
I'm trying to install the Etch on my Qube2 following the Martin
Michlmayr instruction:
http://www.cyrius.com/debian/cobalt/install.html
The installation is always stopped at the nfs connection attempt:
the console says:
[ "CoLo" v1.22 ]
stage2: 87fa0000-88000000
- Masquer le texte des messages précédents -
cpu: clock 250.000MHz
pci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:61:34}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: DISCOVER
dhcp: OFFER 192.168.1.68 <--
192.168.1.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address
192.168.1.68
netmask 255.255.255.0
gateway
192.168.1.1
name server 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> nfs {dhcp-next-server} {dhcp-root-path} {dhcp-boot-file}
no response
script aborted <1>
>
...
I have also tried:
> ping 192.168.1.1 (with success NFS & DCHP server)
> nfs 192.168.1.1 /nfsroot
no response
I should tell that I can mount with success the nfs folder from another system to
192.168.1.1
Thank you for your help
Alain
Reply to: