Re: modules don't load on O2
Jö Fahlke wrote:
[snip]
> ======================================================================
> thor:~# modprobe loop
> FATAL: Error inserting loop (/lib/modules/2.6.9-r5k-ip32/kernel/drivers/block/loop.ko): Invalid module format
> ======================================================================
>
> That is a bit unfortunate since I wanted to link the disks together
> with raid or lvm.
Known problem, still unsolved.
> Also, there are 416MiB of RAM in this machine. ARCS detects this just
> fine, but Linux sees only 256MiB.
Fixed upstream, but not yet packaged.
[snip]
> * The installation of arcboot went totally wrong. It is obviously not
> desinged for installations with boot on its own partition. After
> working around that the system rebooted fine.
Correct, this is IMHO a documentation/user interface issue in the
partitioner. With decent firmware it makes little sense to use a
separate /boot partition.
Thiemo
Reply to: