Hi! I have one Challenge S sitting around and doing nothing. It has a R4400SC@100MHz CPU, 128MiB RAM, 9GB disk. It's currently running Sarge. I may be able to get some other SGI machines (Indys and O2's) if they are needed. Just ask. I can connect the Challenge to the network of my university if you wish (probably with access to the serial console). Jö. cat /proc/cpuinfo: ====================================================================== system type : SGI Indy processor : 0 cpu model : R4400SC V5.0 FPU V0.0 BogoMIPS : 74.75 byteorder : big endian wait instruction : no microsecond timers : yes tlb_entries : 48 extra interrupt vector : no hardware watchpoint : yes VCED exceptions : 11424333 VCEI exceptions : 217165 ====================================================================== free: ====================================================================== total used free shared buffers cached Mem: 126084 118228 7856 0 11472 95680 -/+ buffers/cache: 11076 115008 Swap: 524276 1644 522632 ====================================================================== df -h: ====================================================================== Filesystem Size Used Avail Use% Mounted on /dev/sda2 7.4G 2.8G 4.3G 40% / tmpfs 62M 0 62M 0% /dev/shm ====================================================================== dmesg: ====================================================================== ARCH: SGI-IP22 PROMLIB: ARC firmware Version 1 Revision 10 CPU revision is: 00000450 FPU revision is: 00000500 Primary instruction cache 16kB, physically tagged, direct mapped, linesize 16 bytes. Primary data cache 16kB direct mapped, linesize 16 bytes. Unified secondary cache 1024kB direct mapped, linesize 128 bytes. Linux version 2.4.22-r4k-ip22 (root@nog) (gcc version 3.3.3 (Debian)) #1 Tue Mar 23 11:14:47 CET 2004 MC: SGI memory controller Revision 3 MC: Probing memory configuration: bank0: 64M @ 08000000 bank1: 64M @ 0c000000 Determined physical RAM map: memory: 08000000 @ 08000000 (usable) On node 0 totalpages: 65536 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: auto root=/dev/sda2 Calibrating system timer... 750000 [150.0000 MHz CPU] Using 75.000 MHz high precision timer. Console: colour dummy device 80x25 zs0: console input Console: ttyS0 (Zilog8530), 9600 baud Calibrating delay loop... 74.75 BogoMIPS Memory: 125996k/131072k available (1797k kernel code, 5076k reserved, 116k data, 88k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 initialize_kbd: Keyboard reset failed, no ACK keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) pty: 256 Unix98 ptys configured DS1286 Real Time Clock Driver v1.0 SGI Zilog8530 serial driver version 1.00 tty00 at 0xbfbd9830 (irq = 45) is a Zilog8530 tty01 at 0xbfbd9838 (irq = 45) is a Zilog8530 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) sgiseeq.c: David S. Miller (dm@engr.sgi.com) eth0: SGI Seeq8003 08:00:69:07:c4:10 SCSI subsystem driver Revision: 1.00 wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0 debug_flags=0x00 setup_args=,,,,,,,,, Version 1.25 - 09/Jul/1997, Compiled Mar 23 2004 at 11:17:09 scsi0 : SGI WD93 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST19171N Rev: 0017 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB) Partition check: /dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p4 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 88k freed Adding Swap: 524276k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal ====================================================================== -- Q: How does a Unix guru have sex? A: unzip;strip;touch;finger;mount;fsck;more;yes;umount;sleep -- unknown source
Attachment:
signature.asc
Description: Digital signature