Re: delo 0.1 / Decstation Boot Loader

[Florian Lohoff <flo@rfc822.org>]

On Sat, Oct 14, 2000 at 08:03:37PM +0200, Florian Lohoff wrote:
> Update
> 
> delo 0.2 is up and running

Next update - Delo 0.5 up and running 

I added MS-Dos Partition support that Delo can load from and partition
you select - Syntax for me is

boot 3/rz0 5/boot/vmlinux root=/dev/sda5 console=ttyS2

As you might guess - 5 is the partition number as in /dev/sda5. Currently
i do have the problem that the machine locks hard as soon as the kernel
spits out the Kernel Command Line and i am unsure if this is Kernel or
Bootloader related.

KN05 V2.1k    (PC: 0xa002cab8, SP: 0x83a4dde8)
3/prcache
>>boot 3/rz0 5/boot/vmlinux root=/dev/sda5 console=ttyS2
delo V0.3
Opening ext2fs on partition 5
Loading /boot/vmlinux ................................................ok
This DECstation is a DS5000/2x0
Loading R4000 MMU routines.
CPU revision is: 00000440
Primary instruction cache 16kb, linesize 16 bytes.
Primary data cache 16kb, linesize 16 bytes.
Secondary cache sized at 1024K linesize 32 bytes.
Linux version 2.4.0-test8-pre1 (flo@slimer.rfc822.org) (gcc version egcs-2.90.29 980515 (egcs-1.0.3 release)) #3 Fri Oct 13 16:27:07 CEST 2000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: 5/boot/vmlinux root=/dev/sda5 console=ttyS2

At this position it locks hard (No reset button pressing - Powercycle)

Flo
-- 
Florian Lohoff		flo@rfc822.org		      	+49-5201-669912
      "Write only memory - Oops. Time for my medication again ..."