[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Problems with multiple harddisks on my Indigo2



On Wed, 21 Jun 2000, Ian Chilton wrote:

> I have an SGI Indy, with 2 internal hard disks, a 4GB and a 1GB
> 
> I get the same thing!
> 
> 
> > Also I'm getting a message
> > sc1,2,0: cmd=0x12 timeout after 2 sec.  Resetting SCSI bus
> 
> I started getting this when I added the 2nd HD (1GB).
> 

fwiw, i got this too on my indy when i added a Quantum Empire 1GB.

>From cold boot the PROM doesn't recognise the second disk, but IRIX
does (PROM gives me the exact same error message as the one you wrote
above - but prints it twice). If i halt back to PROM then the PROM
does see the second disk. (and only prints that error message once)

my theories are:

1. PROM controller driver is minimal and doesn't init the
controller/disks properly whereas the IRIX driver does. 

2. disk spin up times.. ??

3. Perhaps cause the outboard SCSI port is not terminated. (least not
on my indy)

> 
-- 
Paul Jakma	paul@clubi.ie
PGP5 key: http://www.clubi.ie/jakma/publickey.txt
-------------------------------------------
Fortune:
Give me a fish and I will eat today.

Teach me to fish and I will eat forever.



Reply to: