losetup fails when building usb-hdd
Hi List,
i'm trying to build an usb-hdd image on debian 6.0.4.
The Tutorial 1 from the manual works fine, but when i try
lb build -b usb-hdd
i get:
Setting up syslinux (2:4.02+dfsg-7) ...
0+0 Datensätze ein
0+0 Datensätze aus
0 Bytes (0 B) kopiert, 1,4e-05 s, 0,0 kB/s
losetup: no permission to look at /dev/loop<N>
P: Begin unmounting filesystems...
I've found a similar problem in this mailinglist, tagged as solved,
but i don't get it:
http://lists.debian.org/debian-live/2008/12/msg00007.html
My mount version is 2.17.2, do i have to downgrade it?
Thanks in advance
A. Ptok
P: Setting up cleanup function
P: Begin caching bootstrap stage...
P: Begin bootstrapping system...
P: If the following stage fails, the most likely cause of the problem is with your mirror configuration or a caching proxy.
P: Running debootstrap (download-only)...
I: Retrieving Release
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: insserv libbz2-1.0 libdb4.8 libslang2
I: Found additional base dependencies: libnfnetlink0 libsqlite3-0
I: Checking component main on http://ftp.de.debian.org/debian...
I: Retrieving libacl1
I: Validating libacl1
I: Retrieving adduser
I: Validating adduser
I: Retrieving apt-utils
I: Validating apt-utils
I: Retrieving apt
I: Validating apt
I: Retrieving aptitude
I: Validating aptitude
I: Retrieving libattr1
I: Validating libattr1
I: Retrieving base-files
I: Validating base-files
I: Retrieving base-passwd
I: Validating base-passwd
I: Retrieving bash
I: Validating bash
I: Retrieving libboost-iostreams1.42.0
I: Validating libboost-iostreams1.42.0
I: Retrieving bsdmainutils
I: Validating bsdmainutils
I: Retrieving libbz2-1.0
I: Validating libbz2-1.0
I: Retrieving coreutils
I: Validating coreutils
I: Retrieving cpio
I: Validating cpio
I: Retrieving cron
I: Validating cron
I: Retrieving libcwidget3
I: Validating libcwidget3
I: Retrieving dash
I: Validating dash
I: Retrieving libdb4.8
I: Validating libdb4.8
I: Retrieving debconf-i18n
I: Validating debconf-i18n
I: Retrieving debconf
I: Validating debconf
I: Retrieving debian-archive-keyring
I: Validating debian-archive-keyring
I: Retrieving debianutils
I: Validating debianutils
I: Retrieving diffutils
I: Validating diffutils
I: Retrieving dmidecode
I: Validating dmidecode
I: Retrieving dpkg
I: Validating dpkg
I: Retrieving e2fslibs
I: Validating e2fslibs
I: Retrieving e2fsprogs
I: Validating e2fsprogs
I: Retrieving libcomerr2
I: Validating libcomerr2
I: Retrieving libss2
I: Validating libss2
I: Retrieving libc-bin
I: Validating libc-bin
I: Retrieving libc6
I: Validating libc6
I: Retrieving findutils
I: Validating findutils
I: Retrieving gcc-4.4-base
I: Validating gcc-4.4-base
I: Retrieving libgcc1
I: Validating libgcc1
I: Retrieving libstdc++6
I: Validating libstdc++6
I: Retrieving libgdbm3
I: Validating libgdbm3
I: Retrieving gnupg
I: Validating gnupg
I: Retrieving gpgv
I: Validating gpgv
I: Retrieving grep
I: Validating grep
I: Retrieving groff-base
I: Validating groff-base
I: Retrieving gzip
I: Validating gzip
I: Retrieving hostname
I: Validating hostname
I: Retrieving ifupdown
I: Validating ifupdown
I: Retrieving insserv
I: Validating insserv
I: Retrieving iproute
I: Validating iproute
I: Retrieving iptables
I: Validating iptables
I: Retrieving iputils-ping
I: Validating iputils-ping
I: Retrieving isc-dhcp-client
I: Validating isc-dhcp-client
I: Retrieving isc-dhcp-common
I: Validating isc-dhcp-common
I: Retrieving logrotate
I: Validating logrotate
I: Retrieving lsb-base
I: Validating lsb-base
I: Retrieving libept1
I: Validating libept1
I: Retrieving liblocale-gettext-perl
I: Validating liblocale-gettext-perl
I: Retrieving libnfnetlink0
I: Validating libnfnetlink0
I: Retrieving libselinux1
I: Validating libselinux1
I: Retrieving libsepol1
I: Validating libsepol1
I: Retrieving libsigc++-2.0-0c2a
I: Validating libsigc++-2.0-0c2a
I: Retrieving libtext-charwidth-perl
I: Validating libtext-charwidth-perl
I: Retrieving libtext-iconv-perl
I: Validating libtext-iconv-perl
I: Retrieving libtext-wrapi18n-perl
I: Validating libtext-wrapi18n-perl
I: Retrieving libusb-0.1-4
I: Validating libusb-0.1-4
I: Retrieving man-db
I: Validating man-db
I: Retrieving manpages
I: Validating manpages
I: Retrieving mawk
I: Validating mawk
I: Retrieving module-init-tools
I: Validating module-init-tools
I: Retrieving nano
I: Validating nano
I: Retrieving libncurses5
I: Validating libncurses5
I: Retrieving libncursesw5
I: Validating libncursesw5
I: Retrieving ncurses-base
I: Validating ncurses-base
I: Retrieving ncurses-bin
I: Validating ncurses-bin
I: Retrieving net-tools
I: Validating net-tools
I: Retrieving netbase
I: Validating netbase
I: Retrieving netcat-traditional
I: Validating netcat-traditional
I: Retrieving libnewt0.52
I: Validating libnewt0.52
I: Retrieving whiptail
I: Validating whiptail
I: Retrieving libssl0.9.8
I: Validating libssl0.9.8
I: Retrieving libpam-modules
I: Validating libpam-modules
I: Retrieving libpam-runtime
I: Validating libpam-runtime
I: Retrieving libpam0g
I: Validating libpam0g
I: Retrieving perl-base
I: Validating perl-base
I: Retrieving libpopt0
I: Validating libpopt0
I: Retrieving procps
I: Validating procps
I: Retrieving libreadline6
I: Validating libreadline6
I: Retrieving readline-common
I: Validating readline-common
I: Retrieving rsyslog
I: Validating rsyslog
I: Retrieving sed
I: Validating sed
I: Retrieving sensible-utils
I: Validating sensible-utils
I: Retrieving login
I: Validating login
I: Retrieving passwd
I: Validating passwd
I: Retrieving libslang2
I: Validating libslang2
I: Retrieving libsqlite3-0
I: Validating libsqlite3-0
I: Retrieving initscripts
I: Validating initscripts
I: Retrieving sysv-rc
I: Validating sysv-rc
I: Retrieving sysvinit-utils
I: Validating sysvinit-utils
I: Retrieving sysvinit
I: Validating sysvinit
I: Retrieving tar
I: Validating tar
I: Retrieving tasksel-data
I: Validating tasksel-data
I: Retrieving tasksel
I: Validating tasksel
I: Retrieving info
I: Validating info
I: Retrieving install-info
I: Validating install-info
I: Retrieving traceroute
I: Validating traceroute
I: Retrieving tzdata
I: Validating tzdata
I: Retrieving libudev0
I: Validating libudev0
I: Retrieving udev
I: Validating udev
I: Retrieving bsdutils
I: Validating bsdutils
I: Retrieving libblkid1
I: Validating libblkid1
I: Retrieving libuuid1
I: Validating libuuid1
I: Retrieving mount
I: Validating mount
I: Retrieving util-linux
I: Validating util-linux
I: Retrieving vim-common
I: Validating vim-common
I: Retrieving vim-tiny
I: Validating vim-tiny
I: Retrieving wget
I: Validating wget
I: Retrieving libxapian22
I: Validating libxapian22
I: Retrieving liblzma2
I: Validating liblzma2
I: Retrieving xz-utils
I: Validating xz-utils
I: Retrieving zlib1g
I: Validating zlib1g
P: If the following stage fails, the most likely cause of the problem is with your mirror configuration or a caching proxy.
P: Running debootstrap...
I: Retrieving Release
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: insserv libbz2-1.0 libdb4.8 libslang2
I: Found additional base dependencies: libnfnetlink0 libsqlite3-0
I: Checking component main on http://ftp.de.debian.org/debian...
I: Validating libacl1
I: Validating adduser
I: Validating apt-utils
I: Validating apt
I: Validating aptitude
I: Validating libattr1
I: Validating base-files
I: Validating base-passwd
I: Validating bash
I: Validating libboost-iostreams1.42.0
I: Validating bsdmainutils
I: Validating libbz2-1.0
I: Validating coreutils
I: Validating cpio
I: Validating cron
I: Validating libcwidget3
I: Validating dash
I: Validating libdb4.8
I: Validating debconf-i18n
I: Validating debconf
I: Validating debian-archive-keyring
I: Validating debianutils
I: Validating diffutils
I: Validating dmidecode
I: Validating dpkg
I: Validating e2fslibs
I: Validating e2fsprogs
I: Validating libcomerr2
I: Validating libss2
I: Validating libc-bin
I: Validating libc6
I: Validating findutils
I: Validating gcc-4.4-base
I: Validating libgcc1
I: Validating libstdc++6
I: Validating libgdbm3
I: Validating gnupg
I: Validating gpgv
I: Validating grep
I: Validating groff-base
I: Validating gzip
I: Validating hostname
I: Validating ifupdown
I: Validating insserv
I: Validating iproute
I: Validating iptables
I: Validating iputils-ping
I: Validating isc-dhcp-client
I: Validating isc-dhcp-common
I: Validating logrotate
I: Validating lsb-base
I: Validating libept1
I: Validating liblocale-gettext-perl
I: Validating libnfnetlink0
I: Validating libselinux1
I: Validating libsepol1
I: Validating libsigc++-2.0-0c2a
I: Validating libtext-charwidth-perl
I: Validating libtext-iconv-perl
I: Validating libtext-wrapi18n-perl
I: Validating libusb-0.1-4
I: Validating man-db
I: Validating manpages
I: Validating mawk
I: Validating module-init-tools
I: Validating nano
I: Validating libncurses5
I: Validating libncursesw5
I: Validating ncurses-base
I: Validating ncurses-bin
I: Validating net-tools
I: Validating netbase
I: Validating netcat-traditional
I: Validating libnewt0.52
I: Validating whiptail
I: Validating libssl0.9.8
I: Validating libpam-modules
I: Validating libpam-runtime
I: Validating libpam0g
I: Validating perl-base
I: Validating libpopt0
I: Validating procps
I: Validating libreadline6
I: Validating readline-common
I: Validating rsyslog
I: Validating sed
I: Validating sensible-utils
I: Validating login
I: Validating passwd
I: Validating libslang2
I: Validating libsqlite3-0
I: Validating initscripts
I: Validating sysv-rc
I: Validating sysvinit-utils
I: Validating sysvinit
I: Validating tar
I: Validating tasksel-data
I: Validating tasksel
I: Validating info
I: Validating install-info
I: Validating traceroute
I: Validating tzdata
I: Validating libudev0
I: Validating udev
I: Validating bsdutils
I: Validating libblkid1
I: Validating libuuid1
I: Validating mount
I: Validating util-linux
I: Validating vim-common
I: Validating vim-tiny
I: Validating wget
I: Validating libxapian22
I: Validating liblzma2
I: Validating xz-utils
I: Validating zlib1g
I: Chosen extractor for .deb packages: dpkg-deb
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting libbz2-1.0...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb4.8...
I: Extracting debconf-i18n...
I: Extracting debconf...
I: Extracting debianutils...
I: Extracting diffutils...
I: Extracting dpkg...
I: Extracting e2fslibs...
I: Extracting e2fsprogs...
I: Extracting libcomerr2...
I: Extracting libss2...
I: Extracting libc-bin...
I: Extracting libc6...
I: Extracting findutils...
I: Extracting gcc-4.4-base...
I: Extracting libgcc1...
I: Extracting libstdc++6...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting insserv...
I: Extracting lsb-base...
I: Extracting liblocale-gettext-perl...
I: Extracting libselinux1...
I: Extracting libsepol1...
I: Extracting libtext-charwidth-perl...
I: Extracting libtext-iconv-perl...
I: Extracting libtext-wrapi18n-perl...
I: Extracting mawk...
I: Extracting libncurses5...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting libpam-modules...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting perl-base...
I: Extracting sed...
I: Extracting sensible-utils...
I: Extracting login...
I: Extracting passwd...
I: Extracting libslang2...
I: Extracting initscripts...
I: Extracting sysv-rc...
I: Extracting sysvinit-utils...
I: Extracting sysvinit...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting bsdutils...
I: Extracting libblkid1...
I: Extracting libuuid1...
I: Extracting mount...
I: Extracting util-linux...
I: Extracting liblzma2...
I: Extracting xz-utils...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking libacl1...
I: Unpacking libattr1...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking libbz2-1.0...
I: Unpacking coreutils...
I: Unpacking dash...
I: Unpacking libdb4.8...
I: Unpacking debconf-i18n...
I: Unpacking debconf...
I: Unpacking debianutils...
I: Unpacking diffutils...
I: Unpacking dpkg...
I: Unpacking e2fslibs...
I: Unpacking e2fsprogs...
I: Unpacking libcomerr2...
I: Unpacking libss2...
I: Unpacking libc-bin...
I: Unpacking libc6...
I: Unpacking findutils...
I: Unpacking gcc-4.4-base...
I: Unpacking libgcc1...
I: Unpacking libstdc++6...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking insserv...
I: Unpacking lsb-base...
I: Unpacking liblocale-gettext-perl...
I: Unpacking libselinux1...
I: Unpacking libsepol1...
I: Unpacking libtext-charwidth-perl...
I: Unpacking libtext-iconv-perl...
I: Unpacking libtext-wrapi18n-perl...
I: Unpacking mawk...
I: Unpacking libncurses5...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking libpam-modules...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking sensible-utils...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking libslang2...
I: Unpacking initscripts...
I: Unpacking sysv-rc...
I: Unpacking sysvinit-utils...
I: Unpacking sysvinit...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking bsdutils...
I: Unpacking libblkid1...
I: Unpacking libuuid1...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking liblzma2...
I: Unpacking xz-utils...
I: Unpacking zlib1g...
I: Configuring required packages...
I: Configuring ncurses-base...
I: Configuring sensible-utils...
I: Configuring libc-bin...
I: Configuring gcc-4.4-base...
I: Configuring libc6...
I: Configuring debianutils...
I: Configuring bsdutils...
I: Configuring libsepol1...
I: Configuring diffutils...
I: Configuring tar...
I: Configuring zlib1g...
I: Configuring libgcc1...
I: Configuring libncurses5...
I: Configuring libattr1...
I: Configuring e2fslibs...
I: Configuring base-passwd...
I: Configuring libcomerr2...
I: Configuring mawk...
I: Configuring libdb4.8...
I: Configuring hostname...
I: Configuring libacl1...
I: Configuring libslang2...
I: Configuring libss2...
I: Configuring liblzma2...
I: Configuring insserv...
I: Configuring gzip...
I: Configuring libbz2-1.0...
I: Configuring libselinux1...
I: Configuring libstdc++6...
I: Configuring coreutils...
I: Configuring ncurses-bin...
I: Configuring base-files...
I: Configuring xz-utils...
I: Configuring dpkg...
I: Configuring sysvinit-utils...
I: Configuring dash...
I: Configuring perl-base...
I: Configuring libtext-iconv-perl...
I: Configuring sed...
I: Configuring grep...
I: Configuring findutils...
I: Configuring liblocale-gettext-perl...
I: Configuring bash...
I: Configuring libtext-charwidth-perl...
I: Configuring libtext-wrapi18n-perl...
I: Configuring lsb-base...
I: Configuring debconf-i18n...
I: Configuring debconf...
I: Configuring libpam0g...
I: Configuring sysv-rc...
I: Configuring libpam-modules...
I: Configuring tzdata...
I: Configuring passwd...
I: Configuring libpam-runtime...
I: Configuring login...
I: Configuring libuuid1...
I: Configuring libblkid1...
I: Configuring mount...
I: Configuring initscripts...
I: Configuring util-linux...
I: Configuring sysvinit...
I: Configuring e2fsprogs...
I: Unpacking the base system...
I: Unpacking adduser...
I: Unpacking apt-utils...
I: Unpacking apt...
I: Unpacking aptitude...
I: Unpacking libboost-iostreams1.42.0...
I: Unpacking bsdmainutils...
I: Unpacking cpio...
I: Unpacking cron...
I: Unpacking libcwidget3...
I: Unpacking debian-archive-keyring...
I: Unpacking dmidecode...
I: Unpacking libgdbm3...
I: Unpacking gnupg...
I: Unpacking gpgv...
I: Unpacking groff-base...
I: Unpacking ifupdown...
I: Unpacking iproute...
I: Unpacking iptables...
I: Unpacking iputils-ping...
I: Unpacking isc-dhcp-client...
I: Unpacking isc-dhcp-common...
I: Unpacking logrotate...
I: Unpacking libept1...
I: Unpacking libnfnetlink0...
I: Unpacking libsigc++-2.0-0c2a...
I: Unpacking libusb-0.1-4...
I: Unpacking man-db...
I: Unpacking manpages...
I: Unpacking module-init-tools...
I: Unpacking nano...
I: Unpacking libncursesw5...
I: Unpacking net-tools...
I: Unpacking netbase...
I: Unpacking netcat-traditional...
I: Unpacking libnewt0.52...
I: Unpacking whiptail...
I: Unpacking libssl0.9.8...
I: Unpacking libpopt0...
I: Unpacking procps...
I: Unpacking libreadline6...
I: Unpacking readline-common...
I: Unpacking rsyslog...
I: Unpacking libsqlite3-0...
I: Unpacking tasksel-data...
I: Unpacking tasksel...
I: Unpacking info...
I: Unpacking install-info...
I: Unpacking traceroute...
I: Unpacking libudev0...
I: Unpacking udev...
I: Unpacking vim-common...
I: Unpacking vim-tiny...
I: Unpacking wget...
I: Unpacking libxapian22...
I: Configuring the base system...
I: Configuring module-init-tools...
I: Configuring libgdbm3...
I: Configuring isc-dhcp-common...
I: Configuring libpopt0...
I: Configuring libusb-0.1-4...
I: Configuring libxapian22...
I: Configuring install-info...
I: Configuring libssl0.9.8...
I: Configuring vim-common...
I: Configuring netbase...
I: Configuring dmidecode...
I: Configuring libudev0...
I: Configuring adduser...
I: Configuring traceroute...
I: Configuring manpages...
I: Configuring libsqlite3-0...
I: Configuring iproute...
I: Configuring wget...
I: Configuring groff-base...
I: Configuring libnewt0.52...
I: Configuring net-tools...
I: Configuring bsdmainutils...
I: Configuring libsigc++-2.0-0c2a...
I: Configuring netcat-traditional...
I: Configuring libncursesw5...
I: Configuring info...
I: Configuring iputils-ping...
I: Configuring cron...
I: Configuring nano...
I: Configuring udev...
I: Configuring libboost-iostreams1.42.0...
I: Configuring rsyslog...
I: Configuring cpio...
I: Configuring isc-dhcp-client...
I: Configuring vim-tiny...
I: Configuring readline-common...
I: Configuring libnfnetlink0...
I: Configuring man-db...
I: Configuring procps...
I: Configuring whiptail...
I: Configuring ifupdown...
I: Configuring libreadline6...
I: Configuring logrotate...
I: Configuring libcwidget3...
I: Configuring iptables...
I: Configuring gpgv...
I: Configuring gnupg...
I: Configuring debian-archive-keyring...
I: Configuring apt...
I: Configuring libept1...
I: Configuring apt-utils...
I: Configuring aptitude...
I: Configuring tasksel-data...
I: Configuring tasksel...
I: Base system installed successfully.
P: Begin caching bootstrap stage...
P: Begin unmounting filesystems...
P: Setting up cleanup function
P: Begin caching chroot stage...
P: Begin mounting /dev/pts...
P: Begin mounting /proc...
P: Begin mounting /sys...
P: Configuring file /etc/debian_chroot
P: Configuring file /sbin/start-stop-daemon
P: Configuring file /usr/sbin/policy-rc.d
P: Configuring file /usr/sbin/initctl
P: Configuring file /etc/hosts
P: Configuring file /etc/resolv.conf
P: Configuring file /etc/hostname
P: Configuring file /bin/hostname
P: Configuring file /etc/apt/apt.conf
P: Configuring file /etc/apt/sources.list
Get:1 http://ftp.de.debian.org squeeze Release.gpg [1672 B]
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Get:2 http://ftp.de.debian.org squeeze-updates Release.gpg [836 B]
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Hit http://ftp.de.debian.org squeeze Release
Get:3 http://ftp.de.debian.org squeeze-updates Release [113 kB]
Hit http://ftp.de.debian.org squeeze/main i386 Packages
Get:4 http://ftp.de.debian.org squeeze-updates/main i386 Packages [16.5 kB]
Get:5 http://security.debian.org squeeze/updates Release.gpg [836 B]
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Get:6 http://security.debian.org squeeze/updates Release [86.9 kB]
Get:7 http://security.debian.org squeeze/updates/main i386 Packages [254 kB]
Fetched 474 kB in 0s (630 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
The following packages will be upgraded:
libc-bin libc6
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 4593 kB of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze-updates/main libc-bin i386 2.11.3-3 [709 kB]
Get:2 http://ftp.de.debian.org/debian/ squeeze-updates/main libc6 i386 2.11.3-3 [3884 kB]
Preconfiguring packages ...
Fetched 4593 kB in 0s (5391 kB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Preparing to replace libc-bin 2.11.3-2 (using .../libc-bin_2.11.3-3_i386.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
Setting up libc-bin (2.11.3-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Preparing to replace libc6 2.11.3-2 (using .../libc6_2.11.3-3_i386.deb) ...
Unpacking replacement libc6 ...
Setting up libc6 (2.11.3-3) ...
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
debian-archive-keyring is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Hit http://security.debian.org squeeze/updates Release.gpg
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Hit http://security.debian.org squeeze/updates Release
Hit http://ftp.de.debian.org squeeze Release.gpg
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Hit http://ftp.de.debian.org squeeze-updates Release.gpg
Hit http://security.debian.org squeeze/updates/main i386 Packages
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Hit http://ftp.de.debian.org squeeze Release
Hit http://ftp.de.debian.org squeeze-updates Release
Hit http://ftp.de.debian.org squeeze/main i386 Packages
Get:1 http://ftp.de.debian.org squeeze-updates/main i386 Packages/DiffIndex [2023 B]
Hit http://ftp.de.debian.org squeeze-updates/main i386 Packages
Fetched 2023 B in 0s (9717 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
P: Configuring file /etc/kernel-img.conf
P: Begin executing preseed...
P: Begin executing local preseeds...
P: Begin installing tasks...
P: Begin queueing installation of packages lists...
P: Begin queueing installation of local packages lists...
P: Begin queueing installation of packages...
P: Begin queueing installation of local packages...
P: Begin installing packages...
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
busybox console-data console-terminus dmsetup firmware-linux-free
initramfs-tools keyboard-configuration klibc-utils libc6-i686
libdevmapper1.02.1 libklibc libmagic1 libuuid-perl linux-base
linux-image-2.6.32-5-486 linux-image-2.6.32-5-686 live-boot
live-boot-initramfs-tools live-config live-config-sysvinit rsync
uuid-runtime xkb-data
Suggested packages:
unicode-data cdtool setcd bash-completion linux-doc-2.6.32 grub lilo
curlftpfs cryptsetup httpfs2 unionfs-fuse openssh-client openssh-server
The following NEW packages will be installed:
busybox console-common console-data console-setup console-terminus dmsetup
eject file firmware-linux-free initramfs-tools kbd keyboard-configuration
klibc-utils libc6-i686 libdevmapper1.02.1 libklibc libmagic1 libuuid-perl
linux-base linux-image-2.6-486 linux-image-2.6-686 linux-image-2.6.32-5-486
linux-image-2.6.32-5-686 live-boot live-boot-initramfs-tools live-config
live-config-sysvinit live-initramfs locales rsync sudo user-setup
uuid-runtime xkb-data
0 upgraded, 34 newly installed, 0 to remove and 0 not upgraded.
Need to get 68.0 MB of archives.
After this operation, 199 MB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze/main console-data all 2:1.10-9 [1188 kB]
Get:2 http://ftp.de.debian.org/debian/ squeeze/main console-terminus all 4.30-2 [527 kB]
Get:3 http://ftp.de.debian.org/debian/ squeeze/main xkb-data all 1.8-2 [839 kB]
Get:4 http://ftp.de.debian.org/debian/ squeeze/main keyboard-configuration all 1.68+squeeze2 [388 kB]
Get:5 http://ftp.de.debian.org/debian/ squeeze/main console-setup all 1.68+squeeze2 [642 kB]
Get:6 http://ftp.de.debian.org/debian/ squeeze/main kbd i386 1.15.2-2 [396 kB]
Get:7 http://ftp.de.debian.org/debian/ squeeze/main console-common all 0.7.85 [128 kB]
Get:8 http://ftp.de.debian.org/debian/ squeeze/main libuuid-perl i386 0.02-4 [10.1 kB]
Get:9 http://ftp.de.debian.org/debian/ squeeze/main linux-base all 2.6.32-41 [178 kB]
Get:10 http://ftp.de.debian.org/debian/ squeeze/main libklibc i386 1.5.20-1+squeeze1 [51.3 kB]
Get:11 http://ftp.de.debian.org/debian/ squeeze/main klibc-utils i386 1.5.20-1+squeeze1 [159 kB]
Get:12 http://ftp.de.debian.org/debian/ squeeze/main initramfs-tools all 0.98.8 [89.5 kB]
Get:13 http://ftp.de.debian.org/debian/ squeeze/main linux-image-2.6.32-5-486 i386 2.6.32-41 [27.5 MB]
Get:14 http://ftp.de.debian.org/debian/ squeeze/main linux-image-2.6.32-5-686 i386 2.6.32-41 [27.7 MB]
Get:15 http://ftp.de.debian.org/debian/ squeeze-updates/main libc6-i686 i386 2.11.3-3 [1206 kB]
Get:16 http://ftp.de.debian.org/debian/ squeeze/main libmagic1 i386 5.04-5 [234 kB]
Get:17 http://ftp.de.debian.org/debian/ squeeze/main file i386 5.04-5 [49.1 kB]
Get:18 http://ftp.de.debian.org/debian/ squeeze-updates/main locales all 2.11.3-3 [4761 kB]
Get:19 http://ftp.de.debian.org/debian/ squeeze/main busybox i386 1:1.17.1-8 [292 kB]
Get:20 http://ftp.de.debian.org/debian/ squeeze/main libdevmapper1.02.1 i386 2:1.02.48-5 [78.5 kB]
Get:21 http://ftp.de.debian.org/debian/ squeeze/main dmsetup i386 2:1.02.48-5 [54.2 kB]
Get:22 http://ftp.de.debian.org/debian/ squeeze/main eject i386 2.1.5+deb1+cvs20081104-7.1 [56.2 kB]
Get:23 http://ftp.de.debian.org/debian/ squeeze/main firmware-linux-free all 2.6.32-41 [156 kB]
Get:24 http://ftp.de.debian.org/debian/ squeeze/main linux-image-2.6-486 i386 2.6.32+29 [4288 B]
Get:25 http://ftp.de.debian.org/debian/ squeeze/main linux-image-2.6-686 i386 2.6.32+29 [4394 B]
Get:26 http://ftp.de.debian.org/debian/ squeeze/main live-boot-initramfs-tools all 2.0.15-1 [29.8 kB]
Get:27 http://ftp.de.debian.org/debian/ squeeze/main live-boot all 2.0.15-1 [76.5 kB]
Get:28 http://ftp.de.debian.org/debian/ squeeze/main live-config-sysvinit all 2.0.15-1 [7732 B]
Get:29 http://ftp.de.debian.org/debian/ squeeze/main live-config all 2.0.15-1 [41.4 kB]
Get:30 http://ftp.de.debian.org/debian/ squeeze/main live-initramfs all 2.0.15-1 [5152 B]
Get:31 http://ftp.de.debian.org/debian/ squeeze/main rsync i386 3.0.7-2 [338 kB]
Get:32 http://ftp.de.debian.org/debian/ squeeze/main sudo i386 1.7.4p4-2.squeeze.2 [591 kB]
Get:33 http://ftp.de.debian.org/debian/ squeeze/main uuid-runtime i386 2.17.2-9 [62.0 kB]
Get:34 http://ftp.de.debian.org/debian/ squeeze/main user-setup all 1.38 [157 kB]
Extracting templates from packages: 88%
Extracting templates from packages: 100%
Preconfiguring packages ...
Fetched 68.0 MB in 7s (9148 kB/s)
Selecting previously deselected package console-data.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Unpacking console-data (from .../console-data_2%3a1.10-9_all.deb) ...
Selecting previously deselected package console-terminus.
Unpacking console-terminus (from .../console-terminus_4.30-2_all.deb) ...
Selecting previously deselected package xkb-data.
Unpacking xkb-data (from .../xkb-data_1.8-2_all.deb) ...
Selecting previously deselected package keyboard-configuration.
Unpacking keyboard-configuration (from .../keyboard-configuration_1.68+squeeze2_all.deb) ...
Selecting previously deselected package console-setup.
Unpacking console-setup (from .../console-setup_1.68+squeeze2_all.deb) ...
Selecting previously deselected package kbd.
Unpacking kbd (from .../archives/kbd_1.15.2-2_i386.deb) ...
update-rc.d: using dependency based boot sequencing
Selecting previously deselected package console-common.
Unpacking console-common (from .../console-common_0.7.85_all.deb) ...
Selecting previously deselected package libuuid-perl.
Unpacking libuuid-perl (from .../libuuid-perl_0.02-4_i386.deb) ...
Selecting previously deselected package linux-base.
Unpacking linux-base (from .../linux-base_2.6.32-41_all.deb) ...
Selecting previously deselected package libklibc.
Unpacking libklibc (from .../libklibc_1.5.20-1+squeeze1_i386.deb) ...
Selecting previously deselected package klibc-utils.
Unpacking klibc-utils (from .../klibc-utils_1.5.20-1+squeeze1_i386.deb) ...
Selecting previously deselected package initramfs-tools.
Unpacking initramfs-tools (from .../initramfs-tools_0.98.8_all.deb) ...
Selecting previously deselected package linux-image-2.6.32-5-486.
Unpacking linux-image-2.6.32-5-486 (from .../linux-image-2.6.32-5-486_2.6.32-41_i386.deb) ...
Selecting previously deselected package linux-image-2.6.32-5-686.
Unpacking linux-image-2.6.32-5-686 (from .../linux-image-2.6.32-5-686_2.6.32-41_i386.deb) ...
Selecting previously deselected package libc6-i686.
Unpacking libc6-i686 (from .../libc6-i686_2.11.3-3_i386.deb) ...
Selecting previously deselected package libmagic1.
Unpacking libmagic1 (from .../libmagic1_5.04-5_i386.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_5.04-5_i386.deb) ...
Selecting previously deselected package locales.
Unpacking locales (from .../locales_2.11.3-3_all.deb) ...
Selecting previously deselected package busybox.
Unpacking busybox (from .../busybox_1%3a1.17.1-8_i386.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.48-5_i386.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_i386.deb) ...
Selecting previously deselected package eject.
Unpacking eject (from .../eject_2.1.5+deb1+cvs20081104-7.1_i386.deb) ...
Selecting previously deselected package firmware-linux-free.
Unpacking firmware-linux-free (from .../firmware-linux-free_2.6.32-41_all.deb) ...
Selecting previously deselected package linux-image-2.6-486.
Unpacking linux-image-2.6-486 (from .../linux-image-2.6-486_2.6.32+29_i386.deb) ...
Selecting previously deselected package linux-image-2.6-686.
Unpacking linux-image-2.6-686 (from .../linux-image-2.6-686_2.6.32+29_i386.deb) ...
Selecting previously deselected package live-boot-initramfs-tools.
Unpacking live-boot-initramfs-tools (from .../live-boot-initramfs-tools_2.0.15-1_all.deb) ...
Selecting previously deselected package live-boot.
Unpacking live-boot (from .../live-boot_2.0.15-1_all.deb) ...
Selecting previously deselected package live-config-sysvinit.
Unpacking live-config-sysvinit (from .../live-config-sysvinit_2.0.15-1_all.deb) ...
Selecting previously deselected package live-config.
Unpacking live-config (from .../live-config_2.0.15-1_all.deb) ...
Selecting previously deselected package live-initramfs.
Unpacking live-initramfs (from .../live-initramfs_2.0.15-1_all.deb) ...
Selecting previously deselected package rsync.
Unpacking rsync (from .../rsync_3.0.7-2_i386.deb) ...
Selecting previously deselected package sudo.
Unpacking sudo (from .../sudo_1.7.4p4-2.squeeze.2_i386.deb) ...
Selecting previously deselected package uuid-runtime.
Unpacking uuid-runtime (from .../uuid-runtime_2.17.2-9_i386.deb) ...
Selecting previously deselected package user-setup.
Unpacking user-setup (from .../user-setup_1.38_all.deb) ...
Processing triggers for man-db ...
Setting up console-data (2:1.10-9) ...
Looking for keymap to install:
NONE
Setting up console-terminus (4.30-2) ...
Setting up xkb-data (1.8-2) ...
Setting up keyboard-configuration (1.68+squeeze2) ...
Setting up console-setup (1.68+squeeze2) ...
Setting up kbd (1.15.2-2) ...
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libuuid-perl (0.02-4) ...
Setting up linux-base (2.6.32-41) ...
Setting up libklibc (1.5.20-1+squeeze1) ...
Setting up klibc-utils (1.5.20-1+squeeze1) ...
Setting up initramfs-tools (0.98.8) ...
update-initramfs: deferring update (trigger activated)
Setting up linux-image-2.6.32-5-486 (2.6.32-41) ...
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-5-486
df: Warning: cannot read table of mounted file systems: No such file or directory
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.32-5-486 /boot/vmlinuz-2.6.32-5-486
Setting up linux-image-2.6.32-5-686 (2.6.32-41) ...
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
df: Warning: cannot read table of mounted file systems: No such file or directory
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.32-5-686 /boot/vmlinuz-2.6.32-5-686
Setting up libc6-i686 (2.11.3-3) ...
Setting up libmagic1 (5.04-5) ...
Setting up file (5.04-5) ...
Setting up locales (2.11.3-3) ...
Generating locales (this might take a while)...
Generation complete.
Setting up busybox (1:1.17.1-8) ...
Setting up firmware-linux-free (2.6.32-41) ...
Setting up linux-image-2.6-486 (2.6.32+29) ...
Setting up linux-image-2.6-686 (2.6.32+29) ...
Setting up live-boot-initramfs-tools (2.0.15-1) ...
update-initramfs: deferring update (trigger activated)
Setting up live-config-sysvinit (2.0.15-1) ...
Setting up live-config (2.0.15-1) ...
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of restart.
Setting up sudo (1.7.4p4-2.squeeze.2) ...
No /etc/sudoers found... creating one for you.
Setting up uuid-runtime (2.17.2-9) ...
Setting up user-setup (1.38) ...
Setting up console-common (0.7.85) ...
Looking for keymap to install:
NONE
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of start.
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
df: Warning: cannot read table of mounted file systems: No such file or directory
Setting up live-boot (2.0.15-1) ...
update-rc.d: warning: live-boot start runlevel arguments (none) do not match LSB Default-Start values (S)
Setting up live-initramfs (2.0.15-1) ...
Setting up libdevmapper1.02.1 (2:1.02.48-5) ...
Setting up eject (2.1.5+deb1+cvs20081104-7.1) ...
Setting up dmsetup (2:1.02.48-5) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
df: Warning: cannot read table of mounted file systems: No such file or directory
Reading package lists...
Building dependency tree...
Reading state information...
P: Begin installing localization packages...
Reading package lists...
Building dependency tree...
Reading state information...
P: Begin copying chroot local includes...
P: Begin applying chroot local patches...
P: Configuring package sysvinit
P: Begin executing local hooks...
P: Begin executing hooks...
P: Begin executing hacks...
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
df: Warning: cannot read table of mounted file systems: No such file or directory
update-initramfs: Generating /boot/initrd.img-2.6.32-5-486
df: Warning: cannot read table of mounted file systems: No such file or directory
P: Deconfiguring file /etc/kernel-img.conf
P: Deconfiguring file /etc/apt/sources.list
Get:1 http://security.debian.org squeeze/updates Release.gpg [836 B]
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Get:2 http://security.debian.org squeeze/updates Release [86.9 kB]
Get:3 http://security.debian.org squeeze/updates/main i386 Packages [254 kB]
Get:4 http://cdn.debian.net squeeze Release.gpg [1672 B]
Ign http://cdn.debian.net/debian/ squeeze/main Translation-en
Get:5 http://cdn.debian.net squeeze-updates Release.gpg [836 B]
Ign http://cdn.debian.net/debian/ squeeze-updates/main Translation-en
Get:6 http://cdn.debian.net squeeze Release [107 kB]
Get:7 http://cdn.debian.net squeeze-updates Release [113 kB]
Get:8 http://cdn.debian.net squeeze/main i386 Packages [8634 kB]
Get:9 http://cdn.debian.net squeeze-updates/main i386 Packages [16.5 kB]
Fetched 9216 kB in 4s (2234 kB/s)
Reading package lists...
P: Deconfiguring file /etc/apt/apt.conf
P: Deconfiguring file /etc/hostname
P: Deconfiguring file /bin/hostname
P: Deconfiguring file /etc/resolv.conf
P: Deconfiguring file /etc/hosts
P: Deconfiguring file /usr/sbin/policy-rc.d
P: Deconfiguring file /usr/sbin/initctl
P: Deconfiguring file /sbin/start-stop-daemon
P: Deconfiguring file /etc/debian_chroot
P: Begin unmounting /sys...
P: Begin unmounting /selinux...
P: Begin unmounting /proc...
P: Begin unmounting /dev/pts...
P: Begin caching chroot stage...
P: Begin unmounting filesystems...
P: Setting up cleanup function
P: Begin copying chroot...
P: This may take a while.
P: Begin mounting /dev/pts...
P: Begin mounting /proc...
P: Begin mounting /sys...
P: Configuring file /etc/hosts
P: Configuring file /etc/resolv.conf
P: Configuring file /etc/hostname
P: Configuring file /bin/hostname
P: Configuring file /usr/sbin/policy-rc.d
P: Configuring file /usr/sbin/initctl
P: Configuring file /etc/apt/apt.conf
P: Configuring file /etc/apt/sources.list
Get:1 http://security.debian.org squeeze/updates Release.gpg [836 B]
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Get:2 http://security.debian.org squeeze/updates Release [86.9 kB]
Get:3 http://ftp.de.debian.org squeeze Release.gpg [1672 B]
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Get:4 http://ftp.de.debian.org squeeze-updates Release.gpg [836 B]
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Hit http://ftp.de.debian.org squeeze Release
Get:5 http://ftp.de.debian.org squeeze-updates Release [113 kB]
Get:6 http://security.debian.org squeeze/updates/main i386 Packages [254 kB]
Hit http://ftp.de.debian.org squeeze/main i386 Packages
Get:7 http://ftp.de.debian.org squeeze-updates/main i386 Packages [16.5 kB]
Fetched 474 kB in 0s (1133 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
The following packages will be upgraded:
libc-bin libc6
Preconfiguring packages ...
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/4593 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Preparing to replace libc-bin 2.11.3-2 (using .../libc-bin_2.11.3-3_i386.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
Setting up libc-bin (2.11.3-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Preparing to replace libc6 2.11.3-2 (using .../libc6_2.11.3-3_i386.deb) ...
Unpacking replacement libc6 ...
Setting up libc6 (2.11.3-3) ...
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
debian-archive-keyring is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Hit http://security.debian.org squeeze/updates Release.gpg
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Hit http://security.debian.org squeeze/updates Release
Hit http://security.debian.org squeeze/updates/main i386 Packages
Hit http://ftp.de.debian.org squeeze Release.gpg
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Hit http://ftp.de.debian.org squeeze-updates Release.gpg
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Hit http://ftp.de.debian.org squeeze Release
Hit http://ftp.de.debian.org squeeze-updates Release
Hit http://ftp.de.debian.org squeeze/main i386 Packages
Get:1 http://ftp.de.debian.org squeeze-updates/main i386 Packages/DiffIndex [2023 B]
Hit http://ftp.de.debian.org squeeze-updates/main i386 Packages
Fetched 2023 B in 0s (7609 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
P: Begin building root filesystem image...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
squashfs-tools
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 114 kB of archives.
After this operation, 295 kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze/main squashfs-tools i386 1:4.0-8 [114 kB]
Fetched 114 kB in 0s (523 kB/s)
Selecting previously deselected package squashfs-tools.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 8510 files and directories currently installed.)
Unpacking squashfs-tools (from .../squashfs-tools_1%3a4.0-8_i386.deb) ...
Processing triggers for man-db ...
Setting up squashfs-tools (1:4.0-8) ...
P: Preparing squashfs image...
P: This may take a while.
Parallel mksquashfs: Using 1 processor
Creating 4.0 filesystem on filesystem.squashfs, block size 131072.
Exportable Squashfs 4.0 filesystem, data block size 131072
compressed data, compressed metadata, compressed fragments
duplicates are removed
Filesystem size 144442.10 Kbytes (141.06 Mbytes)
42.19% of uncompressed filesystem size (342324.45 Kbytes)
Inode table size 187915 bytes (183.51 Kbytes)
30.80% of uncompressed inode table size (610061 bytes)
Directory table size 182021 bytes (177.75 Kbytes)
47.74% of uncompressed directory table size (381280 bytes)
Number of duplicate files found 834
Number of inodes 18491
Number of files 15701
Number of fragments 1565
Number of symbolic links 617
Number of device nodes 37
Number of fifo nodes 2
Number of socket nodes 0
Number of directories 2134
Number of ids (unique uids + gids) 12
Number of uids 3
root (0)
man (6)
libuuid (100)
Number of gids 11
root (0)
tty (5)
kmem (15)
disk (6)
adm (4)
shadow (42)
crontab (102)
staff (50)
libuuid (101)
utmp (43)
mail (8)
P: Deconfiguring file /etc/kernel-img.conf
P: Deconfiguring file /etc/apt/sources.list
Get:1 http://security.debian.org squeeze/updates Release.gpg [836 B]
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Get:2 http://security.debian.org squeeze/updates Release [86.9 kB]
Get:3 http://security.debian.org squeeze/updates/main i386 Packages [254 kB]
Get:4 http://cdn.debian.net squeeze Release.gpg [1672 B]
Ign http://cdn.debian.net/debian/ squeeze/main Translation-en
Get:5 http://cdn.debian.net squeeze-updates Release.gpg [836 B]
Ign http://cdn.debian.net/debian/ squeeze-updates/main Translation-en
Get:6 http://cdn.debian.net squeeze Release [107 kB]
Get:7 http://cdn.debian.net squeeze-updates Release [113 kB]
Get:8 http://cdn.debian.net squeeze/main i386 Packages [8634 kB]
Get:9 http://cdn.debian.net squeeze-updates/main i386 Packages [16.5 kB]
Fetched 9216 kB in 5s (1839 kB/s)
Reading package lists...
P: Deconfiguring file /etc/apt/apt.conf
P: Deconfiguring file /etc/hostname
P: Deconfiguring file /bin/hostname
P: Deconfiguring file /etc/resolv.conf
P: Deconfiguring file /etc/hosts
P: Deconfiguring file /usr/sbin/policy-rc.d
P: Deconfiguring file /usr/sbin/initctl
P: Deconfiguring file /sbin/start-stop-daemon
P: Deconfiguring file /etc/debian_chroot
P: Begin unmounting /sys...
P: Begin unmounting /selinux...
P: Begin unmounting /proc...
P: Begin unmounting /dev/pts...
P: Begin mounting /dev/pts...
P: Begin mounting /proc...
P: Begin mounting /sys...
P: Configuring file /etc/debian_chroot
P: Configuring file /sbin/start-stop-daemon
P: Configuring file /usr/sbin/policy-rc.d
P: Configuring file /usr/sbin/initctl
P: Configuring file /etc/hosts
P: Configuring file /etc/resolv.conf
P: Configuring file /etc/hostname
P: Configuring file /bin/hostname
P: Configuring file /etc/apt/apt.conf
P: Configuring file /etc/apt/sources.list
Hit http://security.debian.org squeeze/updates Release.gpg
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Hit http://security.debian.org squeeze/updates Release
Get:1 http://ftp.de.debian.org squeeze Release.gpg [1672 B]
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Hit http://security.debian.org squeeze/updates/main i386 Packages
Get:2 http://ftp.de.debian.org squeeze-updates Release.gpg [836 B]
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Get:3 http://ftp.de.debian.org squeeze Release [107 kB]
Get:4 http://ftp.de.debian.org squeeze-updates Release [113 kB]
Get:5 http://ftp.de.debian.org squeeze/main i386 Packages [8634 kB]
Get:6 http://ftp.de.debian.org squeeze-updates/main i386 Packages [16.5 kB]
Fetched 8874 kB in 3s (2507 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
debian-archive-keyring is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Hit http://ftp.de.debian.org squeeze Release.gpg
Ign http://ftp.de.debian.org/debian/ squeeze/main Translation-en
Hit http://ftp.de.debian.org squeeze-updates Release.gpg
Ign http://ftp.de.debian.org/debian/ squeeze-updates/main Translation-en
Hit http://ftp.de.debian.org squeeze Release
Hit http://ftp.de.debian.org squeeze-updates Release
Hit http://ftp.de.debian.org squeeze/main i386 Packages
Get:1 http://ftp.de.debian.org squeeze-updates/main i386 Packages/DiffIndex [2023 B]
Hit http://security.debian.org squeeze/updates Release.gpg
Ign http://security.debian.org/ squeeze/updates/main Translation-en
Hit http://ftp.de.debian.org squeeze-updates/main i386 Packages
Hit http://security.debian.org squeeze/updates Release
Hit http://security.debian.org squeeze/updates/main i386 Packages
Fetched 2023 B in 0s (7940 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
P: Configuring file /etc/kernel-img.conf
Reading package lists...
Building dependency tree...
Reading state information...
P: Begin creating manifest...
P: Begin installing local packages lists...
P: Begin install linux-image...
P: Begin installing memtest...
Reading package lists...
Building dependency tree...
Reading state information...
Suggested packages:
hwtools memtester kernel-patch-badram memtest86 grub-pc grub-legacy mtools
The following NEW packages will be installed:
memtest86+
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 221 kB of archives.
After this operation, 668 kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze/main memtest86+ i386 4.10-1.1 [221 kB]
Preconfiguring packages ...
Fetched 221 kB in 0s (808 kB/s)
Selecting previously deselected package memtest86+.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17630 files and directories currently installed.)
Unpacking memtest86+ (from .../memtest86+_4.10-1.1_i386.deb) ...
Processing triggers for man-db ...
Setting up memtest86+ (4.10-1.1) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
memtest86+*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 668 kB disk space will be freed.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17649 files and directories currently installed.)
Removing memtest86+ ...
Purging configuration files for memtest86+ ...
Processing triggers for man-db ...
P: Begin installing syslinux...
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
syslinux-common
Suggested packages:
dosfstools mtools
Recommended packages:
libcrypt-passwdmd5-perl libdigest-sha1-perl
The following NEW packages will be installed:
syslinux syslinux-common
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1363 kB of archives.
After this operation, 3682 kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze/main syslinux-common all 2:4.02+dfsg-7 [1271 kB]
Get:2 http://ftp.de.debian.org/debian/ squeeze/main syslinux i386 2:4.02+dfsg-7 [91.8 kB]
Fetched 1363 kB in 0s (2263 kB/s)
Selecting previously deselected package syslinux-common.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17630 files and directories currently installed.)
Unpacking syslinux-common (from .../syslinux-common_2%3a4.02+dfsg-7_all.deb) ...
Selecting previously deselected package syslinux.
Unpacking syslinux (from .../syslinux_2%3a4.02+dfsg-7_i386.deb) ...
Processing triggers for man-db ...
Setting up syslinux-common (2:4.02+dfsg-7) ...
Setting up syslinux (2:4.02+dfsg-7) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
syslinux-common
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
syslinux*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 197 kB disk space will be freed.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17875 files and directories currently installed.)
Removing syslinux ...
Processing triggers for man-db ...
P: Begin installing disk information...
P: Begin copying binary includes...
P: Begin copying binary local includes...
P: Begin executing local hooks...
P: Begin creating binary md5sum.txt...
P: Begin building binary usb image...
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libparted0debian1
Suggested packages:
libparted0-dev libparted0-i18n floppyd parted-doc
The following NEW packages will be installed:
dosfstools libparted0debian1 mtools parted syslinux
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 734 kB/826 kB of archives.
After this operation, 1778 kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian/ squeeze/main dosfstools i386 3.0.9-1 [90.0 kB]
Get:2 http://ftp.de.debian.org/debian/ squeeze/main libparted0debian1 i386 2.3-5 [310 kB]
Get:3 http://ftp.de.debian.org/debian/ squeeze/main mtools i386 4.0.12-1 [179 kB]
Get:4 http://ftp.de.debian.org/debian/ squeeze/main parted i386 2.3-5 [155 kB]
Fetched 734 kB in 0s (1494 kB/s)
Selecting previously deselected package dosfstools.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17860 files and directories currently installed.)
Unpacking dosfstools (from .../dosfstools_3.0.9-1_i386.deb) ...
Selecting previously deselected package libparted0debian1.
Unpacking libparted0debian1 (from .../libparted0debian1_2.3-5_i386.deb) ...
Selecting previously deselected package mtools.
Unpacking mtools (from .../mtools_4.0.12-1_i386.deb) ...
Selecting previously deselected package parted.
Unpacking parted (from .../archives/parted_2.3-5_i386.deb) ...
Selecting previously deselected package syslinux.
Unpacking syslinux (from .../syslinux_2%3a4.02+dfsg-7_i386.deb) ...
Processing triggers for man-db ...
Processing triggers for install-info ...
Setting up dosfstools (3.0.9-1) ...
Setting up libparted0debian1 (2.3-5) ...
Setting up mtools (4.0.12-1) ...
Setting up parted (2.3-5) ...
Setting up syslinux (2:4.02+dfsg-7) ...
0+0 Datensätze ein
0+0 Datensätze aus
0 Bytes (0 B) kopiert, 1,4e-05 s, 0,0 kB/s
losetup: no permission to look at /dev/loop<N>
P: Begin unmounting filesystems...
Reply to: