[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#633052: marked as done (live-build: Please add support for /run)

Your message dated Fri, 05 Aug 2011 06:17:38 +0000
with message-id <E1QpDj0-0007ty-9G@franck.debian.org>
and subject line Bug#633052: fixed in live-build 3.0~a26-1
has caused the Debian Bug report #633052,
regarding live-build: Please add support for /run
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
633052: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=633052
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Source: live-build
Version: 3.0~a23-1
Severity: important
User: rleigh@debian.org
Usertags: run-transition

Your package is currently using /lib/init/rw/ which is now deprecated
and pending removal.  Please update your package to use /run/ with a
versioned dependency on initscripts, as detailed below.

An overview of the /run transition and its current progress is
available at http://wiki.debian.org/ReleaseGoals/RunDirectory
Basically, it's now in both testing and unstable, and the next
phase of the transition is to migrate all users of /lib/init/rw
over to /run and then remove /lib/init/rw entirely for wheezy
(as soon as this transition is complete).

Your package is one of the users of sendsigs.omit.d listed here:
http://wiki.debian.org/ReleaseGoals/RunDirectory#Packages_using_.2BAC8-lib.2BAC8-init.2BAC8-rw

Recommendations for how to do the transition may be found here:
http://wiki.debian.org/ReleaseGoals/RunDirectory#How_to_transition_from_.2BAC8-lib.2BAC8-init.2BAC8-rw_to_.2BAC8-run.3F

For transitioning from /lib/init/rw to /run, we would recommend that
you:

* Depend on initscripts (>= 2.88dsf-13.3)
* Replace all usage of /lib/init/rw with /run
* Move all files in /lib/init/rw to /run in the package postinst


Regards,
Roger

--- End Message ---
--- Begin Message --- 
Source: live-build
Source-Version: 3.0~a26-1

We believe that the bug you reported is fixed in the latest version of
live-build, which is due to be installed in the Debian FTP archive:

live-build-cgi_3.0~a26-1_all.deb
  to main/l/live-build/live-build-cgi_3.0~a26-1_all.deb
live-build-cron_3.0~a26-1_all.deb
  to main/l/live-build/live-build-cron_3.0~a26-1_all.deb
live-build_3.0~a26-1.debian.tar.gz
  to main/l/live-build/live-build_3.0~a26-1.debian.tar.gz
live-build_3.0~a26-1.dsc
  to main/l/live-build/live-build_3.0~a26-1.dsc
live-build_3.0~a26-1_all.deb
  to main/l/live-build/live-build_3.0~a26-1_all.deb
live-build_3.0~a26.orig.tar.gz
  to main/l/live-build/live-build_3.0~a26.orig.tar.gz



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 633052@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Daniel Baumann <daniel@debian.org> (supplier of updated live-build package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Thu, 04 Aug 2011 21:51:37 +0200
Source: live-build
Binary: live-build live-build-cgi live-build-cron
Architecture: source all
Version: 3.0~a26-1
Distribution: experimental
Urgency: low
Maintainer: Debian Live Project <debian-live@lists.debian.org>
Changed-By: Daniel Baumann <daniel@debian.org>
Description: 
 live-build - Debian Live - System Build Scripts
 live-build-cgi - Debian Live - System Build Scripts (cgi frontend)
 live-build-cron - Debian Live - System Build Scripts (cron autobuilder)
Closes: 586929 607225 627332 627716 630088 631281 633052 633356 636208 636440
Changes: 
 live-build (3.0~a26-1) experimental; urgency=low
 .
   [ Richard Nelson ]
   * Update VERSION in common.sh to match last release.
 .
   [ Daniel Baumann ]
   * Skipping binary_linux-image if no kernel was choosen to be installed
     deliberately, thanks to Adam Conrad <adconrad@ubuntu.com>.
   * Moving archives meta data arround in source tree.
   * Correcting filename of live.debian.net archive file.
   * Adding hook for calling update.mlocate, thanks to Colin Watson
     <cjwatson@ubuntu.com> (Closes: #627332).
   * Adding hook for calling update-apt-xapian-index, thanks to Colin
     Watson <cjwatson@ubuntu.com> (Closes: #627716).
   * Adding hook for removing gnome icon cache, thanks to Colin Watson
     <cjwatson@ubuntu.com> (Closes: #630088).
   * Adding hook to remove python py files, thanks to Colin Watson
     <cjwatson@ubuntu.com> (Closes: #631281).
   * Using --no-check-gpg option when using debootstrap >= 1.0.30 and apt
     secure is disabled, thanks to Eugenio Paolantonio <me@medesimo.eu>
     (Closes: #633356).
   * Also unmounting /run in lb_clean eventhough it's not really needed
     anyway but let's be on the caucious side (Closes: #633052).
   * Adding kubuntu mode in order to have different defadefault hooks
     enabled for ubuntu and kubuntu (needed for #630088).
   * Consolidating local hooks for chroot and binary into
     config/hooks/*.{chroot,binary}.
   * Numbering embedded hooks.
   * Saving packages in cache even when failing or interrupting a build
     (Closes: #586929).
   * Enabling hooks based on the mode we're building for.
   * Calling dpkg-divert with --quiet in chroot_dpkg.
   * Correcting comments in chroot_hooks to match usage.
   * Reworking binary hooks helper.
 .
   [ Cody A.W. Somerville ]
   * Fixing corruption of usb binary images caused by trying to modify
     flags in partition table when image is mounted with offset.
   * Updating lb_binary_linux-image to only copy over kernel and initrd
     if LB_LINUX_PACKAGES doesn't equal 'none'.
   * Appending 'linux32' to LB_ROOT_COMMAND if 'uname -m' is x86_64 and
     LB_ARCHITECTURE is i386.
 .
   [ Daniel Baumann ]
   * Updating cron scripts.
   * Compacting copyright file.
   * Reworking debconf stuff of merging former live-autobuild-manual and
     live-autobuild-images into a single live-build-cron.
   * Avoid to hijack root-command with linux32, rather set use it in the
     chroot function only.
   * Adding a comment to the chroot calls in excludes handling of
     binary_chroot whey the chroot function is not used.
 .
   [ Cody A.W. Somerville ]
   * Setting partition flags in source_usb after creating the filesystem
     in order to avoid bug in parted that makes them forget the flags.
   * Adding function for more resilient detachment of loopback devices.
 .
   [ Daniel Baumann ]
   * Calling mkdir with -p to avoid build failures with multiple kernels
     on disk info in ubuntu mode, thanks to Cody A.W. Somerville
     <cody.somerville@canonical.com>.
   * Correcting uuid extraction from initrds in ubuntu mode to work from
     within binary so that it is cleaned up by lb_clean on failed builds.
   * Setting default compression levels to -6 for gzip, bzip, lzip and
     lzma tarballs.
 .
   [ Cody A.W. Somerville ]
   * Adding paths for remote debian-installer images on armel.
   * Making config tree available to chroot hooks.
 .
   [ Daniel Baumann ]
   * Updating derivatives handling for d-i mirror defaults to better
     match the reality that by default, most derivatives are not going to
     actually rebuild d-i.
   * Adding mdadm manually to extra packages for binary pool for being
     used by debian-installer (Closes: #607225).
   * Add forgotten handling of already set chroot_hooks in defaults.
   * Updating grub packages list in binary_debian-installer.
   * Using 'live' rather than 'incomplete' for cd_type in .disk on images
     that include debian-installer with live-installer udeb.
   * Simplify bind mounting of the config tree during local hooks are run
     by using read-only bind mounts.
   * Removing unmaintained studio package lists.
   * Correcting debconf variables.
   * Updating TODO for live-build-cron.
   * Correcting typo in lb_config for program variable, thanks to
     intrigeri <intrigeri@boum.org>.
   * Adding virtual-hdd in lb_config manpage as binary image type.
   * Handle package-lists parameter for lb_config in live-build-cron-
     images script for both lb version 2.x and 3.x.
   * Setting default kernel flavours for armel to all available flavour
     due to the nature of armel images (single rootfs image, multiple
     kernel images).
   * Removing debian-instaler-distribution selection from live-build-
     cron-images for the time being.
 .
   [ Ben Armstrong ]
   * Fixing/adding cross-references for live-boot and live-config.
 .
   [ Daniel Baumann ]
   * Correcting cross-references to live-boot and live-config in
     lb_config manpage.
   * Adjusting check for target directory in live-build-cron scripts to
     fail if non-directories are used, thanks to Ben Armstrong
     <synrg@debian.org>.
 .
   [ intrigeri ]
   * Cleaning up temporary directories at the same time as other cruft.
 .
   [ Daniel Baumann ]
   * Removing -r from short options in lb_config (Closes: #636208).
   * Adding hook to update apt-file cache (Closes: #636440).
   * Renumbering hook files.
   * Adding missing 'set -e' in remove-python-py.chroot hook.
   * Correcting indentiation in hook defaults assignment.
Checksums-Sha1: 
 cea6a8370850f331bb41d7c14e6a1073bf169982 1299 live-build_3.0~a26-1.dsc
 ef3e544cb6208b01b4e43919d17b81f936e93a5d 1871295 live-build_3.0~a26.orig.tar.gz
 76bb2f310e11d78b64c42d599ed9521456e59a59 47378 live-build_3.0~a26-1.debian.tar.gz
 c3f8ab5570c0ff8a66b2591bbacdf19889784cb9 1136604 live-build_3.0~a26-1_all.deb
 48e3fa890c4da6e3fa873a003f12e7a71fa54ad2 60754 live-build-cgi_3.0~a26-1_all.deb
 fd95849570e8120d911955b6b9dadec8a6739631 60772 live-build-cron_3.0~a26-1_all.deb
Checksums-Sha256: 
 b4a40025d6b176864a887d5abd6c6c771c6a124c718387bce3e21fbdf7b69c9e 1299 live-build_3.0~a26-1.dsc
 02c23763237a137455844f6ef0626f735e1d70e11b14f52ce622238f6bc7be19 1871295 live-build_3.0~a26.orig.tar.gz
 30785186808273c3a61bb7020527c19ab90afba6ce88d8fa33c6056c10e9f343 47378 live-build_3.0~a26-1.debian.tar.gz
 77d7a25cfe20e93a867a232b72ea6a7cb05cff4df40616bf4e790f03c7d42e3e 1136604 live-build_3.0~a26-1_all.deb
 2d247bd7b42cf5c10787ef7e0bf82cfb215b6f0906029117e57acee8e2621287 60754 live-build-cgi_3.0~a26-1_all.deb
 c6e13f93375a4fc82df0ab4027ed2f2984a4032a3cf118e761978a941f38a787 60772 live-build-cron_3.0~a26-1_all.deb
Files: 
 0382e832aa44a068c21bde942e1cd271 1299 misc optional live-build_3.0~a26-1.dsc
 b622c099838a6a00f3d2288c29270205 1871295 misc optional live-build_3.0~a26.orig.tar.gz
 d82b446062e1de54b27e51ab7e962730 47378 misc optional live-build_3.0~a26-1.debian.tar.gz
 d5aca919b8ba0a020e1d8e67b075a82a 1136604 misc optional live-build_3.0~a26-1_all.deb
 d04e86ff88f3bedb7f5b30ce1dc4722a 60754 misc optional live-build-cgi_3.0~a26-1_all.deb
 7b12f869311214368767c32525fa4766 60772 misc optional live-build-cron_3.0~a26-1_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAk47iZcACgkQ+C5cwEsrK55A3QCglv6HDJazJMpFNy8rJGjpzjvM
UNgAoJDk3DMmXr+djagq15x2iOE248tf
=ygZ/
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: