Re: adding debian-installer manually
I tried a few times with the following (live-helper of sid):
lh config --debian-installer true
Get a kernel panic:
P: Begin installing debian-installer...
2010-06-06 17:37:15
URL:http://ftp.de.debian.org/debian//dists/lenny/main/installer-powerpc/current/images//powerpc/cdrom/vmlinux
[5372366/5372366] ->
"/mnt/hda7/cache/binary_debian-installer/http:__ftp.de.debian.org_debian__dists_lenny_main_installer-powerpc_current_images__powerpc_cdrom_vmlinux"
[1]
2010-06-06 17:37:17
URL:http://ftp.de.debian.org/debian//dists/lenny/main/installer-powerpc/current/images//powerpc/cdrom/initrd.gz
[4431412/4431412] ->
"/mnt/hda7/cache/binary_debian-installer/http:__ftp.de.debian.org_debian__dists_lenny_main_installer-powerpc_current_images__powerpc_cdrom_initrd.gz"
[1]
/usr/share/live-helper/functions/chroot.sh: line 11: 28112
Trace/breakpoint trap ${LH_ROOT_COMMAND} /usr/sbin/chroot
"${CHROOT}" /usr/bin/env -i HOME="/root"
PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin"
TERM="${TERM}" ftp_proxy="${LH_APT_FTP_PROXY}"
http_proxy="${LH_APT_HTTP_PROXY}"
DEBIAN_FRONTEND="${LH_DEBCONF_FRONTEND}"
DEBIAN_PRIORITY="${LH_DEBCONF_PRIORITY}"
DEBCONF_NOWARNINGS="${LH_DEBCONF_NOWARNINGS}" XORG_CONFIG="custom"
${COMMANDS}
P: Begin unmounting filesystems...
Message from syslogd@debian at Jun 6 17:37:24 ...
kernel:[ 3182.092183] ------------[ cut here ]------------
dmesg :
[ 3182.092183] ------------[ cut here ]------------
[ 3182.092226] kernel BUG at fs/jbd/transaction.c:1005!
[ 3182.092255] Oops: Exception in kernel mode, sig: 5 [#1]
[ 3182.092265] PowerMac
[ 3182.092272] Modules linked in: binfmt_misc rfcomm l2cap bluetooth nfsd
lockd nfs_acl auth_rpcgss sunrpc exportfs uinput lp parport ipv6
cpufreq_userspace cpufreq_conservative cpufreq_powersave cpufreq_stats
cpufreq_ondemand snd_powermac snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq
snd_timer snd_seq_device snd soundcore snd_page_alloc sbp2 scsi_mod loop
pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core
uninorth_agp agpgart evdev ext3 jbd mbcache ide_disk ohci1394 sungem
sungem_phy ieee1394 i2c_powermac
[ 3182.092433] NIP: e9895c18 LR: e9895bdc CTR: e98d5e3c
[ 3182.092450] REGS: d3665cb0 TRAP: 0700 Not tainted (2.6.26-2-powerpc)
[ 3182.092461] MSR: 00029032 <EE,ME,IR,DR> CR: 42042484 XER: 20000000
[ 3182.092488] TASK = e66dd5d0[28112] 'apt-get' THREAD: d3664000
[ 3182.092498] GPR00: 68646c63 d3665d60 e66dd5d0 e75631d8 e671e360
00000000 00001000 00000000
[ 3182.092525] GPR08: e98d5e3c 68646c62 e63ac9a0 00000001 24044424
1003546c bffff124 bffff120
[ 3182.092552] GPR16: 0ffc13a8 bffff23c bffff238 bffff14c c00817f8
e03d222c 00000001 d500c770
[ 3182.092579] GPR24: 00000000 00001000 e98d5e3c 00000000 e6f4e200
d500c770 e75631d8 cb839988
[ 3182.092607] NIP [e9895c18] journal_dirty_data+0x7c/0x170 [jbd]
[ 3182.092706] LR [e9895bdc] journal_dirty_data+0x40/0x170 [jbd]
[ 3182.092738] Call Trace:
[ 3182.092748] [d3665d60] [e9895bdc] journal_dirty_data+0x40/0x170 [jbd]
(unreliable)
[ 3182.092786] [d3665d80] [e98d5e00] ext3_journal_dirty_data+0x1c/0x58
[ext3]
[ 3182.092900] [d3665da0] [e98d4dac] walk_page_buffers+0x74/0xe0 [ext3]
[ 3182.092943] [d3665dd0] [e98d8628] ext3_ordered_writepage+0x100/0x198
[ext3]
[ 3182.092988] [d3665df0] [c008181c] __writepage+0x24/0x68
[ 3182.093030] [d3665e00] [c0081ed0] write_cache_pages+0x1d8/0x32c
[ 3182.093052] [d3665e90] [c008209c] do_writepages+0x50/0x78
[ 3182.093071] [d3665ea0] [c007bcb4] __filemap_fdatawrite_range+0x7c/0x98
[ 3182.093093] [d3665f00] [c00c6100] do_fsync+0x40/0xc8
[ 3182.093122] [d3665f20] [c00c61b4] __do_fsync+0x2c/0x50
[ 3182.093139] [d3665f40] [c0013810] ret_from_syscall+0x0/0x40
[ 3182.093158] --- Exception: c01 at 0xfbf58d4
[ 3182.093179] LR = 0xff40abc
[ 3182.093186] Instruction dump:
[ 3182.093208] 41820104 81230018 809d0000 2f890000 419e00d8 7f892000
3b600000 419e0084
[ 3182.093251] 801c0028 7d200278 3120ffff 7d690110 <0f0b0000> 80030008
2b800001 409d000c
[ 3182.093300] ---[ end trace f745ac2d04140582 ]---
Op 6/6/2010 schreef "Jeroen Diederen" <jjhdiederen@zonnet.nl>:
>
>I did the same again as in my previous post (scroll down), now with the
>live-helper from sid . Same result. I did it just to show that also
>sid's live-helper has the same problem with regards to
>yaboot/debian-installer for powerpc.
>
>
>debian yaboot # sudo dpkg -l | grep live-helper
>ii live-helper 2.0~a14-1
>Debian Live build scripts
>
>Op 2/6/2010 schreef "Jeroen Diederen" <jjhdiederen@zonnet.nl>:
>
>>
>>My machine does not support a 64-bits kernel to my opinion.
>>
>>I did the following:
>>lh config --debian-installer live
>>lh build
>>
>>I found a bug/problem with live-helper for PPC. I booted the created iso
>>and I could only see entries for the live session in yaboot. There is
>>not a single entry for the installer. I had a look myself in the folders
>>in the live session. It appears that the debian installer kernel was
>>created in /live/image/install. I see an initrd.gz and a vmlinuz there.
>>In /live/image/live I see various kernels (the ones I can choose in the
>>yaboot bootloader).
>>If I look at /live/yaboot/yaboot.conf, I only see the live session kernel
>>entries, not the installer.
>>The same applies to /live/image/debian where I see a yaboot folder, a
>>live folder and an install folder.
>>There is a pool folder in both /live/image as in /live/image/debian.
>>
>>I guess that something goes wrong during installation with the correct
>>writing of yaboot.conf. It misses the information of debian-installer.
>>
>>Hopefully I was clear enough.
>>Jeroen
>
>
>--
>To UNSUBSCRIBE, email to debian-live-request@lists.debian.org
>with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>Archive: Ess5U4WK.1275825512.3739890.jjhdiederen@pop3.versatel.nl">http://lists.debian.org/Ess5U4WK.1275825512.3739890.jjhdiederen@pop3.versatel.nl
>
>
Reply to: