Failed to detect SSD when installing Bullseye
Hi all,
I tried to install Bullseye on my MacBookAir6,1 but the SSD is not detected:
ACPI: SSDT 0x000000008CD7E000 00010B (v01 APPLE SataAhci 00001000
INTL 20100915)
libata version 3.00 loaded.
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf led pio slum part
scsi host0: ahci
ata1: SATA max UDMA/133 abar m512@0xb0700000 port 0xb0700100 irq 54
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata1: limiting SATA link speed to 3.0 Gbps
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [04:00.1] PASID ffffffff fault addr
fffe0000 [fault reason 02] Present bit in context entry is clear
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Buster and earlier releases work just well:
ACPI: SSDT 0x000000008CD7E000 00010B (v01 APPLE SataAhci 00001000
INTL 20100915)
libata version 3.00 loaded.
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf led pio slum part
scsi host0: ahci
ata1: SATA max UDMA/133 abar m512@0xb0700000 port 0xb0700100 irq 49
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: APPLE SSD TS0128F, 109R0219, max UDMA/100
ata1.00: 236978176 sectors, multi 0: LBA48 NCQ (depth 32)
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS0128 0219 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
Can anyone help me please?
Regards,
Nikolay
Reply to: