Re: Hard Drive temp?
Although my particular drive does not list the recommended operating
temperatures like yours does, this line makes me worried:
190 Airflow_Temperature_Cel 0x0022 043 022 045 Old_age
Always FAILING_NOW 57 (6 157 59 51)
Here is the full output:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.1 series
Device Model: ST980825AS
Serial Number: 3MH0PJAL
Firmware Version: 8.04
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Aug 31 12:07:49 2008 IDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 84) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail
Always - 0
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age
Always - 3672
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail
Always - 84316527
9 Power_On_Hours 0x0032 093 093 000 Old_age
Always - 6135
10 Spin_Retry_Count 0x0013 100 099 034 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age
Always - 2027
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 001 001 000 Old_age
Always - 2816
190 Airflow_Temperature_Cel 0x0022 043 022 045 Old_age
Always FAILING_NOW 57 (6 157 59 51)
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age
Always - 2019
193 Load_Cycle_Count 0x0032 001 001 000 Old_age
Always - 510408
194 Temperature_Celsius 0x0022 057 078 000 Old_age
Always - 57 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age
Always - 154163894
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6011 -
# 2 Short offline Completed without error 00% 2468 -
# 3 Short offline Completed without error 00% 1899 -
# 4 Short offline Completed without error 00% 1112 -
# 5 Short offline Completed without error 00% 2 -
# 6 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
ä-ö-ü-ß-Ä-Ö-Ü
Reply to: