Re: automatic wlan connection at bootprocess on Etch only on second try?
Hi Frank,
Am Samstag, 30. Juni 2007 01:05 schrieb Frank Feldner:
> Try adding a wpa-driver statement:
>
> iface eth2 inet dhcp
> wpa-driver your-driver
> wpa-conf /etc/wpa_supplicant/wpa_supplicant.mynet.conf
> auto eth2
>
> Than debug WPA-SUPPLICANT Client:
> sudo wpa_supplicant -i eth2 -D your-driver
> -c/etc/wpa_supplicant/wpa_supplicant.conf -d
>
> Try also:
> sudo dhclient eth2
>
> Restarting network interface:
> sudo ifdown eth2
> sudo ifup eth2
>
> Post outputs and syslog entries related to the above activities.
the wext driver is taken by default.
Here's the output after manually taking down eth2 (ifdown eth2).
Etch-nb:~# ifup --verbose eth2
Configuring interface eth2=eth2 (inet)
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
wpa_supplicant: using default driver type: wpa-driver wext
wpa_supplicant: /sbin/wpa_supplicant -B -P /var/run/wpa_supplicant.eth2.pid -i
eth2 -D
wext -c /etc/wpa_supplicant/wpa_supplicant.mynet.conf -C /var/run/wpa_supplicant
Starting /sbin/wpa_supplicant...
wpa_supplicant: ctrl_interface socket located at /var/run/wpa_supplicant/eth2
dhclient3 -pf /var/run/dhclient.eth2.pid -lf /var/lib/dhcp3/dhclient.eth2.leases
eth2
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth2/00:1b:77:38:26:de
Sending on LPF/eth2/00:1b:77:38:26:de
Sending on Socket/fallback
DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 8
DHCPOFFER from 192.168.0.1
DHCPREQUEST on eth2 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.3 -- renewal in 121643 seconds.
run-parts --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/avahi-daemon
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/wpasupplicant
My config is working, but only at the second try at the end of the
bootprocess.
Any further ideas?
Thank you.
Regards
Michael
Reply to: