wireless
Hi!
Some times ago, I asked for help in installing a wireless card.
The card was broken - now I have a new one - by random the
same card as before: belkin f5d6020g ver. 1.
There was an offer at ebay, so I thought why not, cause
this card should be supported by orinoco_cs and linux-wlan-ng.
The card works under windows and it runs one time under
orinoco_cs. - yes first not, then it runs (i don't know
which kernel I tried :-) and then never again.
I thought: maybe orinoco is not stable for the card and
I need linux-wlan-ng. So I upgraded to testing and
installed kernel 2.4.25-1-586tsc and the linux-wlan-ng
package. I can't get it to work.
The system comes up (pcmcia start) and I get the information
appended below.
Some of the options in /etc/network/interfaces don't work, but
the essid is set right.
When trying to ping I get the following message:
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame
dropped
I can't find something on that error.
Any help would be nice again, I'm a little frustrated, first
card broken, second card bought according to list of supported
cards and bad luck all time - and it is much time I invested.
Why couldn't be there a card which I just insert and it says
yes I will work for you :-)
Thanks
karsten
Jun 26 17:18:39 omni kernel: Linux Kernel Card Services 3.1.22
Jun 26 17:18:39 omni kernel: options: [pci] [cardbus] [pm]
Jun 26 17:18:39 omni kernel: PCI: Guessed IRQ 10 for device 00:03.0
Jun 26 17:18:39 omni kernel: PCI: Guessed IRQ 10 for device 00:03.1
Jun 26 17:18:39 omni kernel: Yenta ISA IRQ mask 0x0818, PCI irq 10
Jun 26 17:18:39 omni kernel: Socket status: 30000006
Jun 26 17:18:39 omni kernel: Yenta ISA IRQ mask 0x0818, PCI irq 10
Jun 26 17:18:39 omni kernel: Socket status: 30000010
Jun 26 17:18:40 omni cardmgr[873]: watching 2 sockets
Jun 26 17:18:40 omni kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x200-0x
207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
Jun 26 17:18:40 omni kernel: cs: IO port probe 0x0800-0x08ff: clean.
Jun 26 17:18:40 omni kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jun 26 17:18:40 omni kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jun 26 17:18:40 omni cardmgr[874]: starting, version is 3.2.5
Jun 26 17:18:40 omni kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Jun 26 17:18:40 omni cardmgr[874]: socket 1: Belkin 11Mbps Wireless Notebook
Net
work Adapter
Jun 26 17:18:40 omni cardmgr[874]: executing: 'modprobe prism2_cs'
Jun 26 17:18:41 omni kernel: init_module: prism2_cs.o: 0.2.0 Loaded
Jun 26 17:18:41 omni kernel: init_module: dev_info is: prism2_cs
Jun 26 17:18:41 omni kernel: prism2_cs: index 0x01: Vcc 5.0, irq 3, io
0x0100-0x
013f
Jun 26 17:18:41 omni cardmgr[874]: executing: './wlan-ng start wlan0'
Jun 26 17:18:42 omni net.agent[879]: Setting up IP spoofing protection:
rp_filter.
Jun 26 17:18:43 omni kernel: ident: nic h/w: id=0x8002 1.0.0
Jun 26 17:18:43 omni kernel: ident: pri f/w: id=0x15 0.3.0
Jun 26 17:18:43 omni kernel: ident: sta f/w: id=0x1f 0.8.3
Jun 26 17:18:43 omni kernel: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
Jun 26 17:18:43 omni kernel: CFI:SUP:role=0x00:id=0x02:var=0x01:b/t=1/1
Jun 26 17:18:43 omni kernel: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/2
Jun 26 17:18:43 omni kernel: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/6
Jun 26 17:18:43 omni kernel: PRI-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
Jun 26 17:18:43 omni kernel: STA-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
Jun 26 17:18:43 omni kernel: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Jun 26 17:18:43 omni kernel: Prism2 card SN: 99SA01000000
Jun 26 17:18:43 omni cardmgr[874]: + Error for wireless request "Set
Mode" (8B06
) :
Jun 26 17:18:43 omni cardmgr[874]: + SET failed on device wlan0 ;
Function not implemented.
Jun 26 17:18:43 omni cardmgr[874]: + Error for wireless request "Set
Frequency" (8B04) :
Jun 26 17:18:43 omni cardmgr[874]: + SET failed on device wlan0 ;
Function not implemented.
Jun 26 17:18:43 omni cardmgr[874]: + Error for wireless request "Set
ESSID" (8B1A) :
Jun 26 17:18:43 omni cardmgr[874]: + SET failed on device wlan0 ;
Function not implemented.
--
email k.roemke at gmx.de
----------------------------------------------------------------------
Reply to: