SMC2602W help please...

[<donnie@darthik.com>]

Hello.
I have a SMC2602W wireless PCI card that I can't seem to get working in
debian linux...(this is not for a laptop, but I am a lurker on this list,
and I figured this would be a good place to try).

Useful information:

uname -r
2.4.23-xfs

lspci
00:0c.0 RF controller: Advanced Micro Devices [AMD] 79c978 [HomePNA]
(rev 03) Subsystem: Standard Microsystems Corp [SMC]: Unknown device
2600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 32 (1000ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at db100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 0
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
PME-

I tried the linux drivers from ADMtek ADM8211 Linux driver 1.03.tar.gz
and ADM8211_src_105.tar.gz :
http://www.admtek.com.tw/index/index/download.htm
As you can see below, I can't seem to get the SMC2602W card working...

insmod 8211.o
Warning: loading 8211.o will taint the kernel: non-GPL license -
Proprietary See http://www.tux.org/lkml/#export-tainted for information
about tainted modules
8211.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

Am I attempting the to use the wrong modules for this wireless card? I
have also attempted to use the orinoco_plx and orinoco_pci with no
success...

modprobe orinoco_plx
/lib/modules/2.4.23-xfs/kernel/drivers/net/wireless/orinoco_plx.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.23-xfs/kernel/drivers/net/wireless/orinoco_plx.o:
insmod /lib/modules/2.4.23-xfs/kernel/drivers/net/wireless/orinoco_plx.o
failed
/lib/modules/2.4.23-xfs/kernel/drivers/net/wireless/orinoco_plx.o:
insmod orinoco_plx failed

modprobe orinoco_pci gives the same error as orinoco_plx.

This is listed in the pcitable for ethernet cards, so it seems my wireless
card is using the same type of chipset???

0x1022	0x2001	"pcnet32"	"Advanced Micro Devices [AMD]|79c978 [HomePNA]"

Referring link:
http://www.lsc-group.phys.uwm.edu/~hammerd/docs/custom_boot9/pcitable.e1000

Any help would be wonderful.... I've read the other threads, and
attempted many different things, but I am lost at this point....

Thanks.

--
Donnie