Re: Install Woody r2 on Inspiron 8100
Karsten Rothemund a écrit :
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
GloubI wrote:
| Hi,
Hi,
I've the same machine. Works for me (except for some urgs).
| I have a Dell Inspiron 8100 and i tried to install woody r2 with
| Cd. I need to use wifi network, so i use bf24 to boot but my dell
| freeze during install...
This can be a problem with the pcmcia setup. From my
/etc/pcmcia/config.opts
# port 0x800-0x8ff macht Probleme auf dem Dell (KaRo 3.9.2002)
# ============================================================
#include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
include port 0x100-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
hope this is clear: port 0x800-0x8ff causes trouble -> machine freezes.
Oki, but how i can desactivate pcmcia during install ?
|
| I don't find any tips or any info on http://www.linux-laptop.net/
|
I cannot believe! I've found several pages dealing with that (it's not
my recipe!).
Ok, i say all : I don't understand where the tips are, i juste fund (or
find ?)
people who are make install with success for the 8100 ? Or maybe i don't
understood (or understand ?) what i read :((
My web-page (but mostly in german, english part is very much "under
construction"):
http://www.photor.de/AET-HP/I8100-Installation.{de,en}.html
Maybe it helps,
I hope so ;)
greetings from the Baltic Sea,
Thanks,
and from Mediterrannée for me !
Sébastien.
- --
Karsten Rothemund,
Institut f. Allgemeine Elektrotechnik, Universitaet Rostock
Tel.: +49 (0)381 498 3649
E-Mail: karsten.rothemund@etechnik.uni-rostock.de
(PGP- and GnuPG-Key available on my HomePage:
~ http://www-ae.e-technik.uni-rostock.de/home/karo/)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQE//YvQ41121otnQEwRAu/+AJ9MV+1B09CuGZRtPOHwQIWuYt3SEQCgyAYv
/KyKwASkMOMuvdZBR7ceuYI=
=Zu79
-----END PGP SIGNATURE-----
Reply to: