FUJI S5000 and Gnomemeeting
Hello all,
I am trying to use my digital camera with gnomemeeting on a HP Pavilion.
When I connect it, the kernel seems to see it, but /dev/video0 would not
exist. I have V4L in my kernel. The lsmod output and the entries in
syslog are below.
Any help or ideas would be appriciated.
Thanks,
Laszlo
*****************
geyser:~# lsmod
*****************
Module Size Used by
snd_pcm_oss 53928 0
snd_mixer_oss 20352 1 snd_pcm_oss
irtty_sir 7552 2
sir_dev 17836 1 irtty_sir
ipt_state 2304 1
af_key 33552 0
tvaudio 22284 0
video_buf 21252 0
videocodec 8852 0
ibmcam 58860 0
ultracam 15884 0
usbvideo 31108 2 ibmcam,ultracam
******************
My /var/log/syslog:
******************
Aug 16 18:26:12 geyser kernel: ehci_hcd 0000:00:0b.2: GetStatus port 2
status 003402 POWER OWNER sig=k CSC
Aug 16 18:26:12 geyser kernel: hub 1-0:1.0: port 2, status 0000, change
0001, 12 Mb/s
Aug 16 18:26:12 geyser kernel: ehci_hcd 0000:00:0b.2: GetStatus port 4
status 001803 POWER sig=j CSC CONNECT
Aug 16 18:26:12 geyser kernel: hub 1-0:1.0: port 4, status 0501, change
0001, 480 Mb/s
Aug 16 18:26:12 geyser kernel: hub 1-0:1.0: debounce: port 4: delay
100ms stable 4 status 0x501
Aug 16 18:26:12 geyser kernel: hub 1-0:1.0: port 4 not reset yet,
waiting 50ms
Aug 16 18:26:12 geyser kernel: ehci_hcd 0000:00:0b.2: port 4 full speed
--> companion
Aug 16 18:26:12 geyser kernel: ehci_hcd 0000:00:0b.2: GetStatus port 4
status 003801 POWER OWNER sig=j CONNECT
Aug 16 18:26:12 geyser kernel: uhci_hcd 0000:00:0b.1: wakeup_hc
Aug 16 18:26:13 geyser kernel: uhci_hcd 0000:00:0b.1: port 2 portsc 0093
Aug 16 18:26:13 geyser kernel: hub 3-0:1.0: port 2, status 0101, change
0001, 12 Mb/s
Aug 16 18:26:13 geyser kernel: hub 3-0:1.0: debounce: port 2: delay
100ms stable 4 status 0x101
Aug 16 18:26:13 geyser kernel: usb 3-2: new full speed USB device using
address 2
Aug 16 18:26:13 geyser kernel: usb 3-2: RETRY descriptor, result -32
Aug 16 18:26:13 geyser last message repeated 4 times
Aug 16 18:26:13 geyser kernel: usb 3-2: new device strings: Mfr=0,
Product=2, SerialNumber=3
Aug 16 18:26:13 geyser kernel: usb 3-2: default language 0x0409
Aug 16 18:26:13 geyser kernel: usb 3-2: Product: USB PC Camera
Aug 16 18:26:13 geyser kernel: usb 3-2: SerialNumber:
Y-560^^^^^040603XFPX0002027849
Aug 16 18:26:13 geyser kernel: usb 3-2: hotplug
Aug 16 18:26:13 geyser kernel: usb 3-2: adding 3-2:1.0 (config #1,
interface 0)
Aug 16 18:26:13 geyser kernel: usb 3-2:1.0: hotplug
Reply to: