pcmcia: "bridge register mapping failed :check cb_mem_base setting" (was Re: your mail)
Incoming from Jollivet Christophe:
>
> I am trying to install the Debian Woody r1 on my Laptop (HP Pavilion N5402l)
> The matter is during PCMCIA CardBus bridge configuration.
> Before i used RedHat 9 and i worked well.....
> lspci on the RedHat was giving:
>
> 02:04.0 CardBus bridge : 02 Micro, Inc 0Z6933 Cardbus Controler (rev 01)
> 02:04.1 CardBus bridge : 02 Micro, Inc 0Z6933 Cardbus Controler (rev 01)
>
> I tried both possibilities during the install and open a second console
> where dmesg was giving for module i8365 :
>
> Linux PCMCIA card Services 3.1.33
> Kernel build 2.4.18:bf2.4 unknow
> option [pci] [cardbus] [apm]
> Intel ISA/PCI/CardBus PCIC probe
> PCI : Found IRQ9 for device 02/04.0
> PCI Sharing IRQ9 with 00:02.0
> PCI Sharing IRQ9 with 00:1d.0
> bridge register mapping failed :check cb_mem_base setting
What's in your /etc/pcmcia/config.opts? Are you using kernel pcmcia
or pcmcia-cs modules?
--
Any technology distinguishable from magic is insufficiently advanced.
(*) http://www.spots.ab.ca/~keeling
- -
Reply to:
- References:
- [no subject]
- From: Jollivet Christophe <jollivet@med.univ-angers.fr>