DWL-650 (D-Link)
Hello,
I have a small laptop, P75 machine, with a PCMCIA card, and a D-Link
DWL-650 wireless card. Having alot of trouble getting this thing to
work, but I'm getting closer.
I'm using kernel 2.4.18 (because anything higher doesn't work on this
machine, its a bug), PCMCIA-cs 3.2.4, other cards work, a 3com ethernet
card, acouple of modems etc..
This card (the D-Link) will now give me a high beep then a low beep.
And here is the snip from the log:
----[SNIP]----
Mar 23 22:49:50 desiree cardmgr[1516]: socket 0: D-Link DWL-650 11Mbps 802.11b WLAN Card
Mar 23 22:49:50 desiree cardmgr[1516]: executing: 'modprobe orinoco_cs'
Mar 23 22:49:50 desiree kernel: hermes.c: 4 Dec 2002 David Gibson <hermes@gibson.dropbear.id.au>
Mar 23 22:49:50 desiree kernel: orinoco.c 0.13b (David Gibson <hermes@gibson.dropbear.id.au> and others)
Mar 23 22:49:50 desiree kernel: orinoco_cs.c 0.13b (David Gibson <hermes@gibson.dropbear.id.au> and others)
Mar 23 22:49:51 desiree kernel: eth0: Station identity 001f:0004:0001:0003
Mar 23 22:49:51 desiree kernel: eth0: Looks like an Intersil firmware version 1.3.4
Mar 23 22:49:51 desiree kernel: eth0: Ad-hoc demo mode supported
Mar 23 22:49:51 desiree kernel: eth0: IEEE standard IBSS ad-hoc mode supported
Mar 23 22:49:51 desiree kernel: eth0: WEP supported, 104-bit key
Mar 23 22:49:51 desiree kernel: eth0: MAC address 00:05:5D:A6:E5:46
Mar 23 22:49:51 desiree kernel: eth0: Station name "Prism I"
Mar 23 22:49:51 desiree kernel: eth0: ready
Mar 23 22:49:51 desiree kernel: eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Mar 23 22:49:51 desiree cardmgr[1516]: executing: './network start eth0'
Mar 23 22:49:51 desiree kernel: eth0: Error -110 setting multicast list.
Mar 23 22:49:51 desiree last message repeated 2 times
Mar 23 22:50:09 desiree kernel: hermes @ IO 0x100: Timeout waiting for command completion.
Mar 23 22:50:09 desiree kernel: hermes @ IO 0x100: Error -16 issuing command.
Mar 23 22:50:09 desiree kernel: hermes @ IO 0x100: Error -16 issuing command.
----[SNIP]----
Why the low-beep, if it can see the card, and also load the drives?
Reply to: