Re: CD-reader on SONY VAIO SR27K

[Andre Eisenbach <andre@eisenbach.com>]

Here is some more info from my installation:

I have the ide_cs driver compiled into the kernel (not as module) - not that 
that makes a difference. Though judging from your log, I assume that kernel 
options are responsible for your problem.

Did you compile your own kernel? If so, what's the config? If not, well you 
should :D. It will allow you to enable sony's interrupt controller as well 
(to enabe the key combos and the jog-dial).

Here's what happens when I plug the CDROM in:

Mar  6 15:23:28 vaio-ae cardmgr[655]: socket 0: Ninja ATA
Mar  6 15:23:29 vaio-ae kernel: hde: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM 
drive
Mar  6 15:23:31 vaio-ae kernel: ide2 at 0x180-0x187,0x386 on irq 3
Mar  6 15:23:31 vaio-ae kernel: hde: ATAPI 16X CD-ROM drive, 128kB Cache
Mar  6 15:23:33 vaio-ae kernel: ide_cs: hde: Vcc = 5.0, Vpp = 0.0
Mar  6 15:23:33 vaio-ae cardmgr[655]: executing: './ide start hde'

You'll note that it assigned IRQ 3 - that is because I removed irq 3 from the 
excluded IRQs since the Vaios don't have serial ports. But that sure has 
nothing to do with your problem. It's your kernel configuration... (I bet)

Cheers,
  Andre

Am Donnerstag 06 März 2003 04:01 schrieb blair.kelly@att.net:
> : cardmgr[990]: socket 0: Ninja ATA
> : cardmgr[990]: executing: 'modprobe ide_cs'
> : cardmgr[990]: get dev info on socket 0 failed: Resource temporarily
> : unavailable