Sound-Problems on Fujitsu-Siemens-Amilo-6100-Laptop
Hi out there!
I cannot get running the sound-system on my AMILO-Laptop :-(
On start of KDE2.2 I always get the following error-message:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such device)
The sound server will continue using the null output device
With modconf I installed the ac97 resp. the ac97_codec sound-modules
(according to the output of the lspci-v-command I thought these should be the right
ones! please have a look to the attached file which shows the output of my
lspci-command).
I also worked with the informations in the respective "SOUND-Howto"
(http://www.tldp.org/HOWTO/Sound-HOWTO/x320.html#AEN391)
On system-start there are no informations concerning the sound card (see
dmesg-file in the attachment)!??!
Also the cat-command to /dev/dsp (like it is described in the sound-howto)
doesn't give any result resp. sound on my laptop. The error-message is: bash:
/dev/dsp No such device
I don't understand why the soundserver or bash cannot find the device dsp
because it does exist on my system (see the file devices-amilo6100.txt in the
attachment).
Any advice on this problem would be really appreciated.
thx in advance,
yours, Richard
--
best regards, salut, liebe Grüsse,
Richard Palfalvi
"Werde was Du bist - Deviens ce que tu es - Become what you are" :-))
Austria - Vienna - Autriche - Vienne - Österreich - Wien - Austria - Vienna
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
00:00.0 Host bridge: Intel Corp. 82440MX I/O Controller (rev 01)
Subsystem: Citicorp TTI: Unknown device 107f
Flags: bus master, medium devsel, latency 64
00:00.1 Multimedia audio controller: Intel Corp. 82440MX AC'97 Audio Controller
Subsystem: Citicorp TTI: Unknown device 112d
Flags: fast devsel, IRQ 5
I/O ports at fe00 [size=256]
I/O ports at ff80 [size=64]
00:00.2 Modem: Intel Corp.: Unknown device 7196 (prog-if 00 [Generic])
Subsystem: Citicorp TTI: Unknown device 10d2
Flags: fast devsel, IRQ 5
I/O ports at 1000 [size=256]
I/O ports at 1400 [size=128]
00:02.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1) (prog-if 00 [VGA])
Subsystem: Citicorp TTI: Unknown device 1113
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [40] Power Management version 1
Capabilities: [50] AGP version 2.0
00:07.0 ISA bridge: Intel Corp. 82440MX PCI to ISA Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corp. 82440MX EIDE Controller (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
tunesia:/home/richard# lsmod
Module Size Used by Not tainted
parport_pc 25704 1 (autoclean)
pcnet_cs 12708 1
lp 6912 0 (autoclean)
parport 21728 1 (autoclean) [parport_pc lp]
8390 5888 0 [pcnet_cs]
ds 6624 2 [pcnet_cs]
i82365 22416 2
pcmcia_core 41408 0 [pcnet_cs ds i82365]
apm 9148 2 (autoclean)
ac97_codec 9568 0 (unused)
ac97 2864 0 (unused)
soundcore 3236 0
usbmouse 1760 0 (unused)
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3072 0 [usbmouse keybdev usbkbd]
usb-uhci 20708 0 (unused)
usbcore 48032 0 [usbmouse usbkbd usb-uhci]
tunesia:/home/richard# dmesg
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3c00 (ACPI data)
BIOS-e820: 0000000007ff3c00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Kernel command line: BOOT_IMAGE=Linux ro root=305
Initializing CPU#0
Detected 846.333 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1690.82 BogoMIPS
Memory: 125616k/131008k available (1783k kernel code, 5004k reserved, 549k data, 280k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9ce, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7198] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
PCI: Found IRQ 5 for device 00:00.2
PCI: Sharing IRQ 5 with 00:00.1
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 0
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:DMA, hdb:DMA
hda: IC25N020ATDA04-0, ATA DISK drive
hdb: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB) w/1806KiB Cache, CHS=2432/255/63
hdb: ATAPI 61X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1204cc0
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 248996k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1480, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
hub.c: USB new device connect on bus1/1, assigned device number 2
input0: Microsoft Microsoft 3-Button Mouse with IntelliEye? on usb1:2.0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 10 for device 00:0a.0
PCI: Sharing IRQ 10 with 00:02.0
PCI: Sharing IRQ 10 with 00:0a.1
PCI: Found IRQ 10 for device 00:0a.1
PCI: Sharing IRQ 10 with 00:02.0
PCI: Sharing IRQ 10 with 00:0a.0
TI 1420 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x10000000
host opts [0]: [ring] [serial pci & irq] [pci irq 10] [lat 168/32] [bus 1/1]
host opts [1]: [ring] [serial pci & irq] [pci irq 10] [lat 168/32] [bus 2/2]
ISA irqs (scanned) = 3,4,7,11,15 PCI status changes
cs: memory probe 0xa0000000-0xa0ffffff: clean.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
cs: IO port probe 0x0100-0x04ff: excluding 0x398-0x39f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x03a0-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:00:CB:45:2B:2C
lp0: using parport0 (polling).
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, cable problem? TSR=0x4, ISR=0x0, t=24.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, cable problem? TSR=0x6, ISR=0x0, t=29.
tunesia:/home/richard#
tunesia:/dev# ls -l dsp
crw-rw-rw- 1 root audio 14, 3 Mar 14 2002 dsp
tunesia:/dev# ls -l audio
crw-rw---- 1 root audio 14, 4 Mar 14 2002 audio
tunesia:/dev# ls -l sndstat
crw-rw---- 1 root audio 14, 6 Mar 14 2002 sndstat
tunesia:/dev#
Reply to: