Re: Thinkpad A21e sound issue
Here is some more info.....when I boot up I get the following:
"Error while initializing sound driver. /dev/dsp can't
be opened (permission denied)"
Pretty clueless about drivers and modules.
I would appreciate any help and in the meantime
I will be off "googling" for while to try and figure this
out myself.
Thanks,
Andy
On Wednesday 25 September 2002 10:58 am, Andy wrote:
> I installed Woody on my Thinkpad A21e and up upgraded my kernel to 2.4.19.
> Everything seems fine except my sound card. I get these warning messages
> when I boot up and it says something about permission denied on /dev/?
> (can't remember) Pretty clueless here so can someone help me get this
> fixed or point me to some online help?
>
> Here is my dmesg:
> debandy:/home/andy# dmesg
> Linux version 2.4.19 (root@debandy) (gcc version 2.95.4 20011002 (Debian
> prerelease)) #1 SMP Fri Sep 20 18:12:28 AKDT 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
> BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 255MB LOWMEM available.
> Advanced speculative caching feature not present
> On node 0 totalpages: 65520
> zone(0): 4096 pages.
> zone(1): 61424 pages.
> zone(2): 0 pages.
> IBM machine detected. Enabling interrupts during APM calls.
> Kernel command line: BOOT_IMAGE=Linux-2.4.19 ro root=303
> Local APIC disabled by BIOS -- reenabling.
> Could not enable APIC!
> Initializing CPU#0
> Detected 697.420 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1392.64 BogoMIPS
> Memory: 256312k/262080k available (1410k kernel code, 5380k reserved, 598k
> data, 120k init, 0k highmem)
> Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
> Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
> Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 128K
> CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
> CPU: Common caps: 0383f9ff 00000000 00000000 00000000
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 128K
> CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
> CPU: Common caps: 0383f9ff 00000000 00000000 00000000
> CPU0: Intel Celeron (Coppermine) stepping 0a
> per-CPU timeslice cutoff: 365.89 usecs.
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> Waiting on wait_init_idle (map = 0x0)
> All processors have done init_idle
> PCI: PCI BIOS revision 2.10 entry at 0xfd9af, last bus=3
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Using IRQ router PIIX [8086/7198] at 00:07.0
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI ISAPNP enabled
> PCI: Found IRQ 11 for device 00:03.1
> PCI: Sharing IRQ 11 with 00:03.0
> Redundant entry in serial pci_table. Please send the output of
> lspci -vv, this message (11c1,045c,8086,2205)
> and the manufacturer and name of serial board or modem board
> to serial-pci-info@lists.sourceforge.net.
> register_serial(): autoconfig failed
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: chipset revision 0
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x1890-0x1897, BIOS settings: hda:DMA, hdb:DMA
> hda: IBM-DJSA-220, ATA DISK drive
> hdb: CD-224E, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: 39070080 sectors (20004 MB) w/1874KiB Cache, CHS=2584/240/63, UDMA(33)
> hdb: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> Partition check:
> hda: hda1 hda2 hda3
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://www.scyld.com/network/eepro100.html
> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
> <saw@saw.sw.com.sg> and others
> PCI: Found IRQ 11 for device 00:03.0
> PCI: Sharing IRQ 11 with 00:03.1
> eth0: OEM i82557/i82558 10/100 Ethernet, 00:03:47:92:F1:1B, IRQ 11.
> Board assembly a30469-008, Physical connectors present: RJ45
> Primary interface chip i82555 PHY #1.
> Secondary interface chip i82555.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x3258698e).
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 203M
> agpgart: no supported devices found.
> [drm] Initialized tdfx 1.0.0 20010216 on minor 0
> [drm] Initialized radeon 1.1.1 20010405 on minor 1
> SCSI subsystem driver Revision: 1.00
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
> es1371: version v0.30 time 18:15:18 Sep 20 2002
> Linux Kernel Card Services 3.1.22
> options: [pci] [cardbus] [pm]
> PCI: Found IRQ 11 for device 00:02.0
> PCI: Sharing IRQ 11 with 00:04.0
> usb.c: registered new driver hub
> Yenta IRQ list 06b8, PCI irq11
> Socket status: 30000059
> uhci.c: USB Universal Host Controller Interface driver v1.1
> PCI: Found IRQ 11 for device 00:07.2
> uhci.c: USB UHCI at I/O 0x18a0, IRQ 11
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP: Hash tables configured (established 16384 bind 16384)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 120k freed
> hub.c: USB new device connect on bus1/1, assigned device number 2
> usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active
> driver.
> Adding Swap: 514072k swap-space (priority -1)
> usb.c: USB disconnect on device 2
> uhci.c: 18a0: host controller halted. very bad
> hub.c: USB new device connect on bus1/1, assigned device number 3
> usb.c: USB device 3 (vend/prod 0x46d/0xc501) is not claimed by any active
> driver.
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0800-0x08ff: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
Reply to: