Toshiba Satellite Pro 4200, Debian 2.2.r3 and XFree86
Bonjour:
Since a while I have tried to configure XF86
with the XF86_SVGA server on a Toshiba laptop (Satellite Pro 4200):
according the the trace below
the XF86_SVGA recognize the chipset ("s3_savage")
but I get a Xscreen during a very short time with an ugly big mouse
before a scratching.
Any idea ?
Thanks in advance,
Jerome BENOIT
"startx 2>&1 | tee log" produces
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
(using VT number 8)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "de"
(**) Mouse: type: PS/2, device: /dev/psaux, resolution: 200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not
exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not
exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi"
(--) SVGA: PCI: S3 Savage/IX-MV rev 17, Memory @ 0xf0000000
(--) SVGA: SAVAGE: Savage/MX rev 11, Linear FB @ 0xf0000000
(--) SVGA: Detected S3 Savage/MX
(--) SVGA: using driver for chipset "s3_savage"
(--) SVGA: videoram: 8192k
(--) SVGA: Ramdac speed: 250 MHz (220 MHz for 32 bpp)
(--) SVGA: Detected current MCLK value of 83.045 MHz
(--) SVGA: VBE Version 2.0
(--) SVGA: BIOS label is "S3 Incorporated. M7 BIOS"
(--) SVGA: Found 12 modes at this depth:
[10f] 320 x 200, 70Hz
[112] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[115] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
[11e] 640 x 400, 70Hz
[124] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[134] 320 x 240, 72Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[175] 720 x 480, 75Hz
[17a] 720 x 576, 75Hz
(--) SVGA: chipset: s3_savage
(--) SVGA: videoram: 8192k
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 220.000 MHz
(**) SVGA: Mode "800x600": mode clock = 36.000
(**) SVGA: Mode "400x300": mode clock = 18.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: s3_savage: Using hardware cursor
Chose mode 115 at 60Hz.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext,
TE/NonTE polytext)
(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
waiting for X server to shut down
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Reply to: