Re: Linksys EtherFast 10/100 CardBus PC Card (PCMCIA)
On Sat, Mar 03, 2001 at 08:22:36PM +0100, Andreas Mohr wrote:
>
> You have to use tulip anyway, AFAIK.
> And of course your ping didn't work.
> I told you that you need to put it in promiscuous mode (tcpdump)
> for it to work.
> --> wrong driver, get the right one.
>
I have a working LinkSys EtherFast 10/100 PC Card Model No: PCMPC100
>From dmesg:
Linux version 2.4.2 (root@nodge) (gcc version 2.95.3 20010125 (prerelease)) #2 Sun Feb 25 15:35:31 PST 2001
<snip>
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe:
Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket
host opts [0]: none
ISA irqs (scanned) = 3 polling interval = 1000 ms
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
eth0: NE2000 (DL10022 rev 05): io 0x300, irq 3, hw_addr 00:E0:98:80:98:64
eth0: found link beat
eth0: autonegotiation complete: 100baseT-FD selected
>From lsmod:
Module Size Used by
pcnet_cs 9728 1
8390 6064 0 [pcnet_cs]
ds 6608 1 [pcnet_cs]
i82365 11936 1
pcmcia_core 39616 0 [pcnet_cs ds i82365]
Same thing with a 2.2 kernel, BTW. I think someone at LinkSys got confused.
They recently switched their PCI card chips from PNIC to ADMtek, which require
the included tulip driver for 2.2 kernels. AFAIK, the PCMCIA cards are still
NE2000 clones, not tulip clones.
Hope that helps.
<jakemsr@clipper.net>
Reply to: