[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Debian Installer sublevel 1: Yet another tentative to get files completed...sublevel 3



# Subject: Debian Installer sublevel 1: Yet another tentative to get files completed...sublevel 1

Hi,

Once again, I'm trying to get translations completed for Debian
Installer. Attached is sublevel 3 for your language, which is
currently incomplete.

Please consider completing and committing it (feel free to ask me in
case you have trouble committing).

There is no strict deadline, but Debian will likely release in 2012,
so it really begins to be worrying when languages are not complete in
D-I.

Thanks in advance,


# translation of Debian Installer templates to Brazilian Portuguese.
# This file is distributed under the same license as debian-installer.
#
# Felipe Augusto van de Wiel (faw) <faw@debian.org>, 2008-2010.
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-08-04 22:50+0000\n"
"PO-Revision-Date: 2010-11-19 15:51-0200\n"
"Last-Translator: Felipe Augusto van de Wiel (faw) <faw@debian.org>\n"
"Language-Team: Brazilian Portuguese <debian-l10n-portuguese@lists.debian."
"org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: text
#. Description
#. :sl3:
#: ../console-setup.templates:2001
msgid "Do not change the boot/kernel font"
msgstr "Não mude a fonte do kernel/inicialização"

#. Type: text
#. Description
#. :sl3:
#: ../console-setup.templates:3001
msgid "Let the system select a suitable font"
msgstr ""

#. Type: text
#. Description
#. Used in the font size question like this: "12x24, framebuffer only"
#. :sl3:
#: ../console-setup.templates:4001
msgid "framebuffer only"
msgstr ""

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Arabic"
msgstr ". Árabe"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Armenian"
msgstr "# Armênio"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Cyrillic - KOI8-R and KOI8-U"
msgstr "# Cirílico - KOI8-R e KOI8-U"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Cyrillic - non-Slavic languages"
msgstr "# Cirílico - línguas não-eslavas"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Cyrillic - Slavic languages (also Bosnian and Serbian Latin)"
msgstr "# Cirílico - Línguas eslavas (também Bósnio e Sérvio Latim)"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Ethiopic"
msgstr ". Etíope"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Georgian"
msgstr "# Georgiano"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Greek"
msgstr "# Grego"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Hebrew"
msgstr "# Hebraico"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Lao"
msgstr "# Laociano"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Latin1 and Latin5 - western Europe and Turkic languages"
msgstr "# Latin1 e Latin5 - Europa ocidental e línguas Turcas"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Latin2 - central Europe and Romanian"
msgstr "# Latin2 - Europa central e Romeno"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Latin3 and Latin8 - Chichewa; Esperanto; Irish; Maltese and Welsh"
msgstr "# Latin3 e Latin8 - Chichewa; Esperanto; Irlandês; Maltês e Galês"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Latin7 - Lithuanian; Latvian; Maori and Marshallese"
msgstr "# Latin7 - Lituano; Letão; Maori e Marshallese"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Latin - Vietnamese"
msgstr ". Latino - Vietnamita"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid "# Thai"
msgstr "# Tailandês"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Combined - Latin; Slavic Cyrillic; Hebrew; basic Arabic"
msgstr ". Combinado - Latino; Eslavo Cirílico; Hebraico; Árabe básico"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Combined - Latin; Slavic Cyrillic; Greek"
msgstr ". Combinado - Latino; Eslavo Cirílico; Grego"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
msgid ". Combined - Latin; Slavic and non-Slavic Cyrillic"
msgstr ". Combinado - Latino; Eslavo e não-Eslavo Cirílico"

#. Type: select
#. Choices
#. :sl3:
#: ../console-setup.templates:5001
#, fuzzy
#| msgid "Enter random characters"
msgid "Guess optimal character set"
msgstr "Informe caracteres aleatórios"

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:5002
msgid "Character set to support:"
msgstr "Conjunto de caracteres suportados:"

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:5002
msgid ""
"Please choose the character set that should be supported by the console font."
msgstr ""
"Por favor, escolha o conjunto de caracteres que deverá ser suportado pela "
"fonte do console:"

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:5002
msgid ""
"If you don't use a framebuffer, the choices that start with \".\" will "
"reduce the number of available colors on the console."
msgstr ""
"Se você não usa um framebuffer, as escolhas que começam com \".\" reduzirão "
"o número de cores disponíveis no console."

#. Type: select
#. Description
#. The languages with many non-ASCII letters should not use formatted
#. lists.  If you decide to use formatted lists then keep the lines
#. relatively short.
#. :sl3:
#: ../console-setup.templates:6001
msgid "Font for the console:"
msgstr "Fonte para o console:"

#. Type: select
#. Description
#. The languages with many non-ASCII letters should not use formatted
#. lists.  If you decide to use formatted lists then keep the lines
#. relatively short.
#. :sl3:
#: ../console-setup.templates:6001
msgid ""
"\"VGA\" has a traditional appearance and has medium coverage of "
"international scripts. \"Fixed\" has a simplistic appearance and has better "
"coverage of international scripts. \"Terminus\" may help to reduce eye "
"fatigue, though some symbols have a similar aspect which may be a problem "
"for programmers."
msgstr ""
"\"VGA\" tem uma aparência tradicional e tem uma cobertura média de scripts "
"internacionais. \"Fixed\" tem uma aparência simplista e tem melhor cobertura "
"de scripts internacionais. \"Terminus\" pode ajudar a reduzir a fadiga "
"ocular, apesar de alguns símbolos terem um aspecto semelhante que pode ser "
"um problema para programadores."

#. Type: select
#. Description
#. The languages with many non-ASCII letters should not use formatted
#. lists.  If you decide to use formatted lists then keep the lines
#. relatively short.
#. :sl3:
#: ../console-setup.templates:6001
msgid ""
"If you prefer a bold version of the Terminus font, choose either "
"TerminusBold (if you use a framebuffer) or TerminusBoldVGA (otherwise)."
msgstr ""
"Se você prefere uma versão negrito da fonte Terminus, escolha TerminusBold "
"(se você usa um framebuffer) ou TerminuxBoldVGA (caso contrário)."

#. Type: select
#. Description
#. :sl3:
#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:7001 ../console-setup.templates:8001
msgid "Font size:"
msgstr "Tamanho da fonte:"

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:7001
#, fuzzy
#| msgid ""
#| "Please select the size of the font for the Linux console. For reference, "
#| "the font used when the computer boots has size 16."
msgid ""
"Please select the size of the font for the console. For reference, the font "
"used when the computer boots has size 8x16."
msgstr ""
"Por favor, selecione o tamanho da fonte para o console Linux. Para "
"referência, a fonte usada quando seu computador inicializa tem tamanho 16."

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:8001
#, fuzzy
#| msgid ""
#| "Please select the size of the font for the Linux console. For reference, "
#| "the font used when the computer boots has size 16."
msgid ""
"Please select the size of the font for the console.  For reference, the font "
"used when the computer boots has size 8x16.  Some font sizes require the kbd "
"console package (not console-tools) plus framebuffer."
msgstr ""
"Por favor, selecione o tamanho da fonte para o console Linux. Para "
"referência, a fonte usada quando seu computador inicializa tem tamanho 16."

#. Type: select
#. Description
#. :sl3:
#: ../console-setup.templates:9001
msgid "Encoding to use on the console:"
msgstr "Codificação para usar no console:"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:7001
msgid "Keep the current keyboard layout in the configuration file?"
msgstr "Manter o layout de teclado atual no arquivo de configuração?"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:7001
msgid ""
"The current keyboard layout in the configuration file /etc/default/keyboard "
"is defined as XKBLAYOUT=\"${XKBLAYOUT}\" and XKBVARIANT=\"${XKBVARIANT}\"."
msgstr ""
"O layout de teclado atual no arquivo de configuração /etc/default/keyboard "
"está definido como XKBLAYOUT=\"${XKBLAYOUT}\" e XKBVARIANT=\"${XKBVARIANT}\"."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:7001
msgid ""
"Please choose whether you want to keep it. If you choose this option, no "
"questions about the keyboard layout will be asked and the current "
"configuration will be preserved."
msgstr ""
"Por favor, escolha se você quer mantê-lo. Se você escolher esta opção, "
"nenhuma pergunta sobre o layout do teclado será feita e a configuração atual "
"será mantida."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:8001
msgid "Keep default keyboard layout (${XKBLAYOUTVARIANT})?"
msgstr "Manter o layout de teclado (${XKBLAYOUTVARIANT}) padrão?"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:8001
msgid ""
"The default value for the keyboard layout is XKBLAYOUT=\"${XKBLAYOUT}\" and "
"XKBVARIANT=\"${XKBVARIANT}\".  This default value is based on the currently "
"defined language/region and the settings in /etc/X11/xorg.conf."
msgstr ""
"O valor padrão para o layout do teclado é XKBLAYOUT=\"${XKBLAYOUT}\" e "
"XKBVARIANT=\"${XKBVARIANT}\". Este valor padrão é baseado na configuração "
"atual de língua/região e nas configurações em /etc/X11/xorg.conf."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:8001
msgid ""
"Please choose whether you want to keep it. If you choose this option, no "
"questions about the keyboard layout will be asked."
msgstr ""
"Por favor, escolha se você quer mantê-lo. Se você escolher esta opção, "
"nenhuma pergunta sobre o layout do teclado será feita."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:9001
msgid "Keep current keyboard options in the configuration file?"
msgstr "Manter opções de teclado atuais no arquivo de configuração?"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:9001
msgid ""
"The current keyboard options in the configuration file /etc/default/keyboard "
"are defined as XKBOPTIONS=\"${XKBOPTIONS}\"."
msgstr ""
"As opções de teclado atuais no arquivo de configuração /etc/default/keyboard "
"estão definidas como XKBOPTIONS=\"${XKBOPTIONS}\"."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:9001
msgid ""
"If you choose to keep these options, no questions about the keyboard options "
"will be asked."
msgstr ""
"Se você escolher manter estas opções, nenhuma pergunta sobre as opções do "
"teclado será feita."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:10001
msgid "Keep default keyboard options (${XKBOPTIONS})?"
msgstr "Manter as opções padrão de teclado (${XKBOPTIONS})?"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:10001
msgid ""
"The default value for the options of the keyboard layout is XKBOPTIONS="
"\"${XKBOPTIONS}\".  It is based on the currently defined language/region and "
"the settings in /etc/X11/xorg.conf."
msgstr ""
"O valor padrão para as opções do layout do teclado é XKBOPTIONS="
"\"${XKBOPTIONS}\".  Ele é baseado na língua/região definida atualmente e nas "
"configurações em /etc/X11/xorg.conf."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:10001
msgid ""
"If you choose to keep it, no questions about the keyboard options will be "
"asked."
msgstr ""
"Se você escolher mantê-lo, nenhuma pergunta sobre as opções do teclado será "
"feita."

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:15001
msgid "Use Control+Alt+Backspace to terminate the X server?"
msgstr "Usar Control+Alt+Backspace para terminar o servidor X?"

#. Type: boolean
#. Description
#. :sl3:
#: ../keyboard-configuration.templates:15001
msgid ""
"By default the combination Control+Alt+Backspace does nothing.  If you want "
"it can be used to terminate the X server."
msgstr ""
"Por padrão, a combinação Control+Alt+Backspace não faz nada. Se você quiser, "
"ela pode ser usada para terminar o servidor X."

#. Type: boolean
#. Description
#. :sl3:
#: ../ethdetect.templates:2001
msgid "Do you intend to use FireWire Ethernet?"
msgstr "Você pretende usar FireWire Ethernet?"

#. Type: boolean
#. Description
#. :sl3:
#: ../ethdetect.templates:2001
msgid ""
"No Ethernet card was detected, but a FireWire interface is present. It's "
"possible, though unlikely, that with the right FireWire hardware connected "
"to it, this could be your primary Ethernet interface."
msgstr ""
"Nenhuma placa Ethernet foi detectada, mas uma interface FireWire está "
"presente. É possível, embora improvável, que com o hardware FireWire correto "
"conectado a ela, essa possa ser sua interface Ethernet primária."

#. Type: string
#. Description
#. :sl3:
#: ../hw-detect.templates:8001
msgid "Additional parameters for module ${MODULE}:"
msgstr "Parâmetros adicionais para o módulo ${MODULE}:"

#. Type: string
#. Description
#. :sl3:
#: ../hw-detect.templates:8001
msgid ""
"The module ${MODULE} failed to load. You may need to pass parameters to the "
"module to make it work; this is common with older hardware. These parameters "
"are often I/O port and IRQ numbers that vary from machine to machine and "
"cannot be determined from the hardware. An example string looks something "
"like \"irq=7 io=0x220\""
msgstr ""
"O módulo ${MODULE} falhou ao ser carregado. Você pode precisar passar "
"parâmetros para o módulo para que o mesmo possa funcionar; isso é comum com "
"hardware mais antigo. Esses parâmetros são frequentemente a porta I/O e "
"números IRQ, os quais variam de máquina para máquina e não podem ser "
"determinados a partir do hardware. Um exemplo seria parecido com \"irq=7 "
"io=0x220\""

#. Type: string
#. Description
#. :sl3:
#: ../hw-detect.templates:8001
msgid ""
"If you don't know what to enter, consult your documentation, or leave it "
"blank to not load the module."
msgstr ""
"Se você não sabe o que informar, consulte sua documentação ou deixe em "
"branco para que o módulo não seja carregado."

#. Type: text
#. Description
#. Main menu item
#. :sl3:
#: ../driver-injection-disk-detect.templates:1001
msgid "Detect virtual driver disks from hardware manufacturer"
msgstr "Detectar unidades de disco virtuais do fabricante do hardware"

#. Type: boolean
#. Description
#. :sl3:
#: ../driver-injection-disk-detect.templates:2001
msgid "Load drivers from internal virtual driver disk?"
msgstr "Carregar drivers a partir de uma unidade interna de disco virtual?"

#. Type: boolean
#. Description
#. :sl3:
#: ../driver-injection-disk-detect.templates:2001
msgid ""
"Installing on this hardware may require some drivers provided by the "
"manufacturer to be loaded from the built-in driver injection disk."
msgstr ""
"A instalação neste hardware pode requerer que alguns drivers fornecidos pelo "
"fabricante sejam carregados a partir do disco de injeção de drivers "
"embutidos."

#. Type: error
#. Description
#. :sl3:
#: ../choose-mirror-bin.templates-in:9001
msgid "Architecture not supported"
msgstr "Arquitetura não suportada"

#. Type: error
#. Description
#. :sl3:
#: ../choose-mirror-bin.templates-in:9001
msgid ""
"The specified Debian archive mirror does not seem to support your "
"architecture. Please try a different mirror."
msgstr ""
"O espelho do repositório Debian especificado não parece dar suporte à sua "
"arquitetura. Por favor, tente um espelho diferente."

#. Type: text
#. Description
#. For example MMC/SD card #1 (mmcblk0)
#. :sl3:
#: ../partman-base.templates:51001
#, fuzzy, no-c-format
#| msgid "DASD %s (%s)"
msgid "MMC/SD card #%s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. For example MMC/SD card #1, partition #2 (mmcblk0p2)
#. :sl3:
#: ../partman-base.templates:52001
#, fuzzy, no-c-format
#| msgid "SCSI%s, partition #%s (%s)"
msgid "MMC/SD card #%s, partition #%s (%s)"
msgstr "SCSI%s, partição no. %s (%s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:53001
#, no-c-format
msgid "RAID%s device #%s"
msgstr "Dispositivo RAID%s #%s"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:54001
#, no-c-format
msgid "Encrypted volume (%s)"
msgstr "Volume criptografado (%s)"

#. Type: text
#. Description
#. For example: Serial ATA RAID isw_dhiiedgihc_Volume0 (mirror)
#. :sl3:
#: ../partman-base.templates:55001
#, no-c-format
msgid "Serial ATA RAID %s (%s)"
msgstr "Serial ATA RAID %s (%s)"

#. Type: text
#. Description
#. For example: Serial ATA RAID isw_dhiiedgihc_Volume01 (partition #1)
#. :sl3:
#: ../partman-base.templates:56001
#, no-c-format
msgid "Serial ATA RAID %s (partition #%s)"
msgstr "Serial ATA RAID %s (partição #%s)"

#. Type: text
#. Description
#. Translators: "multipath" is a pretty tricky term to translate
#. You'll find some documentation about it at
#. http://www.redhat.com/docs/manuals/csgfs/browse/4.6/DM_Multipath/index.html
#. "Short" definition:
#. Device Mapper Multipathing (DM-Multipath) allows you to configure
#. multiple I/O paths between server nodes and storage arrays into a
#. single device. These I/O paths are physical SAN connections that can
#. include separate cables, switches, and controllers. Multipathing
#. aggregates the I/O paths, creating a new device that consists of the
#. aggregated paths.
#. WWID stands for World-Wide IDentification
#. :sl3:
#: ../partman-base.templates:57001
#, no-c-format
msgid "Multipath %s (WWID %s)"
msgstr "\"Multipath\" %s (WWID %s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:58001
#, no-c-format
msgid "Multipath %s (partition #%s)"
msgstr "\"Multipath\" %s (partição #%s)"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:59001
#, no-c-format
msgid "LVM VG %s, LV %s"
msgstr "VG LVM %s, LV %s"

#. Type: text
#. Description
#. :sl3:
#: ../partman-base.templates:61001
#, no-c-format
msgid "Loopback (loop%s)"
msgstr "Loopback (loop%s)"

#. Type: error
#. Description
#. :sl3:
#: ../bootstrap-base.templates:9001
msgid "Unsupported initrd generator"
msgstr "Não há suporte para o gerador initrd"

#. Type: error
#. Description
#. :sl3:
#: ../bootstrap-base.templates:9001
msgid ""
"The package ${GENERATOR} that was selected to generate the initrd is not "
"supported."
msgstr ""
"O pacote ${GENERATOR} que foi selecionado para gerar o initrd não tem "
"suporte."

#. Type: select
#. Choices
#. :sl3:
#: ../bootstrap-base.templates:10001
msgid "generic: include all available drivers"
msgstr "genérico: inclui todos os drivers disponíveis"

#. Type: select
#. Choices
#. :sl3:
#: ../bootstrap-base.templates:10001
msgid "targeted: only include drivers needed for this system"
msgstr "direcionado: só inclui drivers necessários para este sistema"

#. Type: select
#. Description
#. :sl3:
#: ../bootstrap-base.templates:10002
msgid "Drivers to include in the initrd:"
msgstr "Drivers a serem incluídos no initrd:"

#. Type: select
#. Description
#. :sl3:
#: ../bootstrap-base.templates:10002
msgid ""
"The primary function of an initrd is to allow the kernel to mount the root "
"file system. It therefore needs to contain all drivers and supporting "
"programs required to do that."
msgstr ""
"A função primária de uma imagem initrd é permitir que o kernel monte o "
"sistema de arquivos raiz. Por isso, ela precisa conter todos os drivers e "
"programas de apoio necessários para fazer isto."

#. Type: select
#. Description
#. :sl3:
#: ../bootstrap-base.templates:10002
msgid ""
"A generic initrd is much larger than a targeted one and may even be so large "
"that some boot loaders are unable to load it but has the advantage that it "
"can be used to boot the target system on almost any hardware. With the "
"smaller targeted initrd there is a very small chance that not all needed "
"drivers are included."
msgstr ""
"Uma imagem initrd genérica é muito maior do que uma direcionada e pode ser "
"tão grande que alguns carregadores de inicialização não serão capazes de "
"carregá-la, mas há a vantagem de que ela pode ser usada para inicializar o "
"sistema alvo em praticamente qualquer hardware. Com a imagem initrd menor e "
"direcionada há uma chance muito pequena de que nem todos os drivers "
"necessários sejam incluídos."

#. Type: multiselect
#. Choices
#. SEC_HOST and VOL_HOST are host names (e.g. security.debian.org)
#. Translators: the *entire* string should be under 55 columns
#. including host name. In short, KEEP THIS SHORT and, yes, that's tricky
#. :sl3:
#: ../apt-setup-udeb.templates:11001
msgid "security updates (from ${SEC_HOST})"
msgstr "atualizações de segurança (de ${SEC_HOST})"

#. Type: multiselect
#. Choices
#. SEC_HOST and VOL_HOST are host names (e.g. security.debian.org)
#. Translators: the *entire* string should be under 55 columns
#. including host name. In short, KEEP THIS SHORT and, yes, that's tricky
#. :sl3:
#: ../apt-setup-udeb.templates:11001
msgid "volatile updates (from ${VOL_HOST})"
msgstr "atualizações voláteis (\"volatile\") (de ${VOL_HOST})"

#. Type: multiselect
#. Description
#. :sl3:
#: ../apt-setup-udeb.templates:11002
msgid "Services to use:"
msgstr "Serviços a serem usados:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../apt-setup-udeb.templates:11002
msgid ""
"Debian has two services that provide updates to releases: security and "
"volatile."
msgstr ""
"O Debian possui dois serviços que fornecem atualizações para os lançamentos: "
"segurança (\"security\") e voláteis (\"volatile\")."

#. Type: multiselect
#. Description
#. :sl3:
#: ../apt-setup-udeb.templates:11002
msgid ""
"Security updates help to keep your system secured against attacks. Enabling "
"this service is strongly recommended."
msgstr ""
"Atualizações de segurança ajudam a manter seu sistema seguro contra ataques. "
"Habilitar este serviço é fortemente recomendado."

#. Type: multiselect
#. Description
#. :sl3:
#: ../apt-setup-udeb.templates:11002
msgid ""
"Volatile updates provide more current versions for software that changes "
"relatively frequently and where not having the latest version could reduce "
"the usability of the software. An example is the virus signatures for a "
"virus scanner. This service is only available for stable and oldstable "
"releases."
msgstr ""
"Atualizações voláteis (\"volatile\") fornecem versões mais atuais para "
"softwares que mudam com relativa frequência e onde não ter a última versão "
"poderia reduzir a usabilidade do software. Um exemplo são as assinaturas de "
"vírus para um anti-vírus. Este serviço só está disponível para versões "
"\"stable\" e \"oldstable\"."

#. Type: note
#. Description
#. :sl3:
#: ../nobootloader.templates:5001
msgid "No boot loader installed"
msgstr "Nenhum carregador de inicialização instalado"

#. Type: note
#. Description
#. :sl3:
#: ../nobootloader.templates:5001
msgid ""
"No boot loader has been installed, either because you chose not to or "
"because your specific architecture doesn't support a boot loader yet."
msgstr ""
"Nenhum carregador de inicialização foi instalado devido a você ter optado "
"por não instalar nenhum ou devido a sua arquitetura específica ainda não "
"suportar um carregador de inicialização."

#. Type: note
#. Description
#. :sl3:
#: ../nobootloader.templates:5001
msgid ""
"You will need to boot manually with the ${KERNEL} kernel on partition "
"${BOOT} and ${ROOT} passed as a kernel argument."
msgstr ""
"Você precisará iniciar manualmente com o kernel ${KERNEL} na partição "
"${BOOT} e ${ROOT} passado como argumento para o kernel."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Install the GRUB boot loader to the Serial ATA RAID disk?"
msgstr "Instalar o carregador de inicialização GRUB no disco Serial ATA RAID?"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid "Installation of GRUB on Serial ATA RAID is experimental."
msgstr "A instalação do GRUB em Serial ATA RAID é experimental."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the Serial ATA "
"RAID disk. It is also assumed that disk is listed as the first hard disk in "
"the boot order defined in the system's BIOS setup."
msgstr ""
"O GRUB sempre é instalado no registro mestre de inicialização (MBR) do disco "
"Serial ATA RAID. Também assume-se que o disco é listado como o primeiro "
"disco rígido na ordem de inicialização definida na configuração da BIOS do "
"sistema."

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:3001 ../grub-installer.templates:5001
msgid "The GRUB root device is: ${GRUBROOT}."
msgstr "O dispositivo raiz do GRUB é: ${GRUBROOT}."

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001
msgid "An error occurred while setting up GRUB for your Serial ATA RAID disk."
msgstr ""
"Um erro ocorreu durante a configuração do GRUB para o seu disco Serial ATA "
"RAID."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
msgid "The GRUB installation has been aborted."
msgstr "A instalação do GRUB foi abortada."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Install the GRUB boot loader to the multipath device?"
msgstr ""
"Instalar o carregador de inicialização GRUB no dispositivo \"multipath\"?"

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid "Installation of GRUB on multipath is experimental."
msgstr "A instalação do GRUB no \"multipath\" é experimental."

#. Type: boolean
#. Description
#. :sl3:
#: ../grub-installer.templates:5001
msgid ""
"GRUB is always installed to the master boot record (MBR) of the multipath "
"device. It is also assumed that the WWID of this device is selected as boot "
"device in the system's FibreChannel adapter BIOS."
msgstr ""
"O GRUB sempre é instalado no registro mestre de inicialização (MBR) do "
"dispositivo \"multipath\". Também assume-se que o WWID deste dispositivo "
"está selecionado como o dispositivo de inicialização na BIOS do adaptador de "
"fibra ótica (\"FibreChannel\") do sistema."

#. Type: error
#. Description
#. :sl3:
#: ../grub-installer.templates:6001
msgid "An error occurred while setting up GRUB for the multipath device."
msgstr ""
"Um erro ocorreu durante a configuração do GRUB para o seu dispositivo "
"\"multipath\"."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../lilo-installer.templates:1001
msgid "${disc}: Master Boot Record"
msgstr "${disc}: Registro de Inicialização Principal"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../lilo-installer.templates:1001
msgid "${part}: new Debian partition"
msgstr "${part}: nova partição Debian"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../lilo-installer.templates:1001 ../lilo-installer.templates:2001
msgid "Other choice (Advanced)"
msgstr "Outra opção (Avançado)"

#. Type: select
#. Description
#. :sl3:
#. Type: select
#. Description
#. :sl3:
#. Type: string
#. Description
#. :sl3:
#: ../lilo-installer.templates:1002 ../lilo-installer.templates:2002
#: ../lilo-installer.templates:3001
msgid "LILO installation target:"
msgstr "Alvo para instalação do LILO:"

#. Type: select
#. Description
#. :sl3:
#: ../lilo-installer.templates:1002
msgid ""
"The LILO program needs to be installed to make your new system bootable. By "
"installing it onto your disk's Master Boot Record, LILO will take complete "
"control of the boot process, but if you want to use a different boot "
"manager, just install LILO on the new Debian partition instead."
msgstr ""
"O programa LILO precisa ser instalado para fazer com que seu novo sistema "
"recém-instalado seja inicializável. Com a instalação do LILO no Registro de "
"Inicialização Principal, o mesmo terá controle total do processo de "
"inicialização, mas, caso você prefira usar um gerenciador de inicialização "
"diferente, simplesmente instale o LILO na nova partição Debian."

#. Type: select
#. Description
#. :sl3:
#: ../lilo-installer.templates:1002
msgid "If unsure, install LILO into the Master Boot Record."
msgstr ""
"Caso não tenha certeza sobre o que fazer, instale o LILO no Registro de "
"Inicialização Principal."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../lilo-installer.templates:2001
msgid "${disc}: software RAID array"
msgstr "${disc}: agrupamento RAID via software"

#. Type: select
#. Description
#. :sl3:
#: ../lilo-installer.templates:2002
msgid ""
"The LILO program needs to be installed to make your new system bootable. You "
"may choose to install it onto a software RAID array or another device."
msgstr ""
"O programa LILO precisa ser instalado para tornar seu novo sistema recém-"
"instalado inicializável. Você pode optar por instalá-lo em um agrupamento "
"RAID via software ou em outro dispositivo."

#. Type: string
#. Description
#. :sl3:
#: ../lilo-installer.templates:3001
msgid ""
"Please enter the device name of the partition or disk onto which LILO should "
"be installed, such as /dev/hda or /dev/sda1."
msgstr ""
"Por favor, informe o nome do dispositivo da partição ou disco no qual o LILO "
"deverá ser instalado, como /dev/hda ou /dev/sda1."

#. Type: error
#. Description
#. :sl3:
#: ../lilo-installer.templates:4001
msgid "Invalid partition name"
msgstr "Nome de partição inválido"

#. Type: error
#. Description
#. :sl3:
#: ../lilo-installer.templates:4001
msgid ""
"The path ${path} does not represent a partition or hard disk device. Please "
"try again."
msgstr ""
"O caminho ${path} não representa uma partição ou um dispositivo de disco "
"rígido. Por favor, tente novamente."

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:5001
msgid "Installing LILO..."
msgstr "Instalando o LILO..."

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:6001
msgid "Activating partition ${bootdev}"
msgstr "Ativando partição ${bootdev}"

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:7001
msgid "Creating lilo.conf"
msgstr "Criando lilo.conf"

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:8001
msgid "Installing the LILO package"
msgstr "Instalando o pacote LILO"

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:9001
msgid "Running LILO for ${bootdev}"
msgstr "Executando o LILO para ${bootdev}"

#. Type: note
#. Description
#. :sl3:
#: ../lilo-installer.templates:10001
msgid "LILO configured to use a serial console"
msgstr "LILO configurado para usar um console serial"

#. Type: note
#. Description
#. :sl3:
#: ../lilo-installer.templates:10001
msgid ""
"LILO is configured to use serial port ${PORT} as the console. ${PORT_SPEED}"
msgstr ""
"O LILO está configurado para usar a porta serial ${PORT} como o console. "
"${PORT_SPEED}"

#. Type: text
#. Description
#. :sl3:
#: ../lilo-installer.templates:11001
msgid "The serial port speed is set to ${SPEED}."
msgstr "A velocidade da porta serial está configurada para ${SPEED}."

#. Type: boolean
#. Description
#. :sl3:
#: ../lilo-installer.templates:12001
msgid "Would you like to make this partition active?"
msgstr "Gostaria de tornar esta partição ativa?"

#. Type: boolean
#. Description
#. :sl3:
#: ../lilo-installer.templates:12001
msgid ""
"You have chosen to install LILO on a partition that is not the active one. "
"If this partition is not marked active, then LILO will not be loaded by the "
"boot loader. This may cause you to be unable to boot into the system that is "
"being installed."
msgstr ""
"Você optou por instalar o LILO em uma partição que não é uma partição ativa. "
"Caso essa partição não seja marcada como ativa o LILO não será carregado "
"pelo carregador de inicialização. Isso pode fazer com que você não seja mais "
"capaz de iniciar o sistema que está sendo instalado."

#. Type: boolean
#. Description
#. :sl3:
#: ../lilo-installer.templates:12001
msgid ""
"You should make this partition active unless you have another boot loader "
"that will allow you to access your new Linux installation."
msgstr ""
"Você deverá tornar essa partição ativa a menos que você possua outro "
"carregador de inicialização que lhe permitirá acessar sua nova instalação "
"Linux."

#. Type: boolean
#. Description
#. :sl3:
#: ../lilo-installer.templates:13001
msgid "LILO installation failed. Continue anyway?"
msgstr "A instalação do LILO falhou. Continuar mesmo assim?"

#. Type: boolean
#. Description
#. :sl3:
#: ../lilo-installer.templates:13001
msgid ""
"The lilo package failed to install into /target/. Installing LILO as a boot "
"loader is a required step. The install problem might however be unrelated to "
"LILO, so continuing the installation may be possible."
msgstr ""
"A instalação do pacote lilo em /target/ falhou. A instalação do gerenciador "
"de inicialização LILO é uma etapa requerida. O problema de instalação pode "
"ser não relacionado ao LILO, portanto continuar a instalação pode ser "
"possível."

#. Type: error
#. Description
#. :sl3:
#: ../lilo-installer.templates:14001
msgid "LILO installation failed"
msgstr "A instalação do LILO falhou"

#. Type: error
#. Description
#. :sl3:
#: ../lilo-installer.templates:14001
msgid "Running \"/sbin/lilo\" failed with error code \"${ERRCODE}\"."
msgstr ""
"A execução de \"/sbin/lilo\" falhou com o código de erro \"${ERRCODE}\"."

#. Type: text
#. Description
#. Main menu item
#. :sl3:
#: ../lilo-installer.templates:15001
msgid "Install the LILO boot loader on a hard disk"
msgstr "Instalar o carregador de inicialização LILO em um disco rígido"

#. Type: string
#. Description
#. :sl3:
#: ../network-preseed.templates:2001
#, fuzzy
#| msgid "Load debconf preconfiguration file"
msgid "Location of initial preconfiguration file:"
msgstr "Carregar arquivo de pré-configuração debconf"

#. Type: string
#. Description
#. :sl3:
#: ../network-preseed.templates:2001
msgid ""
"In order to perform an automated install, you need to supply a "
"preconfiguration file (which can in turn pull in other files). To do that, "
"you need to provide a (perhaps partial) URL."
msgstr ""

#. Type: string
#. Description
#. :sl3:
#: ../network-preseed.templates:2001
msgid ""
"This can be as simple as the machine name where your preseed files reside up "
"to a full URL. Any of these could be made to work:\n"
"  intra\t\t[for example.com, these three are equivalent]\n"
"  intra.example.com\n"
"  http://intra.example.com/d-i/./lenny/preseed.cfg\n";
"  http://192.168.0.1/~phil/test47.txt\n";
"  floppy://preseed.cfg\n"
"  file:///hd-media/kiosk/./preseed.cfg"
msgstr ""

#. Type: string
#. Description
#. :sl3:
#: ../network-preseed.templates:2001
msgid ""
"For fully automated installs, preseed/url should itself be preseeded (via "
"kernel command line, DHCP, or syslinux.cfg on customised media)"
msgstr ""

#. Type: string
#. Description
#. :sl3:
#: ../network-preseed.templates:2001
msgid "See http://wiki.debian.org/DebianInstaller/Preseed for inspiration."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl5:
#: ../rescue-mode.templates:2001 ../partconf.templates:1001
msgid "No partitions found"
msgstr "Nenhuma partição encontrada"

#. Type: text
#. Description
#. :sl3:
#: ../rescue-mode.templates:2001
msgid ""
"The installer could not find any partitions, so you will not be able to "
"mount a root file system. This may be caused by the kernel failing to detect "
"your hard disk drive or failing to read the partition table, or the disk may "
"be unpartitioned. If you wish, you may investigate this from a shell in the "
"installer environment."
msgstr ""
"O instalador não pode encontrar nenhuma partição, portanto você não será "
"capaz de montar o sistema de arquivos raiz. Isto pode ser causado por um "
"kernel que falhou ao detectar a sua unidade de disco rígido ou que falhou ao "
"ler a tabela de partições, ou o disco pode não estar particionado. Se você "
"quiser, você pode investigar o problema a partir de um shell no ambiente do "
"instalador."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:4001
msgid "No such device"
msgstr "Dispositivo não encontrado"

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:4001
msgid ""
"The device you entered for your root file system (${DEVICE}) does not exist. "
"Please try again."
msgstr ""
"O dispositivo que você informou para seu sistema de arquivos raiz "
"(${DEVICE}) não existe. Por favor, tente novamente."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:5001
msgid "Mount failed"
msgstr "Montagem falhou"

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:5001
msgid ""
"An error occurred while mounting the device you entered for your root file "
"system (${DEVICE}) on /target."
msgstr ""
"Um erro ocorreu durante a montagem do dispositivo que você informou como seu "
"sistema de arquivos raiz (${DEVICE}) em /target."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:5001
msgid "Please check the syslog for more information."
msgstr "Por favor, confira o syslog para maiores informações."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:7001
msgid "Rescue operation failed"
msgstr "Operação de recuperação falhou"

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:7001
msgid "The rescue operation '${OPERATION}' failed with exit code ${CODE}."
msgstr ""
"A operação de recuperação '${OPERATION}' falhou com o código de saída "
"${CODE}."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:13001
msgid "Error running shell in /target"
msgstr "Erro executando prompt de comando em /target"

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:13001
msgid ""
"A shell (${SHELL}) was found on your root file system (${DEVICE}), but an "
"error occurred while running it."
msgstr ""
"Um shell (${SHELL}) foi encontrado em seu sistema de arquivos raiz "
"(${DEVICE}), mas um erro ocorreu no momento de sua execução."

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:14001
msgid "No shell found in /target"
msgstr "Nenhum shell encontrado em /target"

#. Type: error
#. Description
#. :sl3:
#: ../rescue-mode.templates:14001
msgid "No usable shell was found on your root file system (${DEVICE})."
msgstr ""
"Não foi encontrado nenhum shell utilizável em seu sistema de arquivos raiz "
"(${DEVICE})."

#. Type: text
#. Description
#. :sl3:
#: ../iso-scan.templates:4001
msgid "Detecting hardware to find hard drives"
msgstr "Detectando hardware para encontrar discos rígidos"

#. Type: text
#. Description
#. :sl3:
#: ../iso-scan.templates:5001
msgid "Searching drives for an installer ISO image"
msgstr "Procurando nos discos por uma imagem ISO do instalador"

#. Type: text
#. Description
#. :sl3:
#: ../iso-scan.templates:6001
msgid "Mounting ${DRIVE}..."
msgstr "Montando ${DRIVE}..."

#. Type: text
#. Description
#. :sl3:
#: ../iso-scan.templates:7001
msgid "Scanning ${DRIVE} (in ${DIRECTORY})..."
msgstr "Procurando em ${DRIVE} (em ${DIRECTORY})..."

#. Type: boolean
#. Description
#. :sl3:
#: ../iso-scan.templates:8001
msgid "Do full disk search for installer ISO image?"
msgstr ""
"Fazer uma busca completa no disco a procura de uma imagem ISO do instalador?"

#. Type: boolean
#. Description
#. :sl3:
#: ../iso-scan.templates:8001
msgid ""
"The quick scan for installer ISO images, which looks only in common places, "
"did not find an installer ISO image. It's possible that a more thorough "
"search will find the ISO image, but it may take a long time."
msgstr ""
"A busca rápida por imagens ISO do instalador, a qual procura somente em "
"locais comuns, não encontrou uma imagem ISO de instalador. É possível que "
"uma busca mais completa encontre a imagem ISO, mas a mesma irá demorar um "
"tempo consideravelmente maior."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:9001 ../iso-scan.templates:10001
msgid "Failed to find an installer ISO image"
msgstr "Falha ao procurar por uma imagem ISO do instalador"

#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:9001
msgid ""
"No installer ISO images were found. If you downloaded the ISO image, it may "
"have a bad filename (not ending in \".iso\"), or it may be on a file system "
"that could not be mounted."
msgstr ""
"Nenhuma imagem ISO do instalador foi encontrada. Se você baixou a imagem "
"ISO, a mesma pode ter um nome de arquivo incorreto (não terminado com a "
"extensão \".iso\") ou a mesma pode estar em um sistema de arquivos que pode "
"não estar montado."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:9001 ../iso-scan.templates:10001
#: ../iso-scan.templates:11001
#, fuzzy
#| msgid ""
#| "You'll have to use an alternative installation method, or try again after "
#| "you've fixed the ISO image."
msgid ""
"You'll have to use an alternative installation method, select another device "
"to look for ISO image, or try again after you've fixed it."
msgstr ""
"Você terá que usar um método alternativo de instalação ou tentar novamente "
"após corrigir a imagem ISO."

#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:10001
msgid ""
"While one or more possible ISO images were found, they could not be mounted. "
"The ISO image you downloaded may be corrupt."
msgstr ""
"Apesar de uma ou mais imagens ISO terem sido encontradas, as mesmas não "
"puderam ser montadas. A imagem ISO que você obteve pode estar corrompida."

#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:11001
msgid "No installer ISO image found"
msgstr "Nenhuma imagem do instalador encontrada"

#. Type: error
#. Description
#. :sl3:
#: ../iso-scan.templates:11001
msgid ""
"While one or more possible ISO images were found, they did not look like "
"valid installer ISO images."
msgstr ""
"Apesar de uma ou mais imagens ISO terem sido encontradas, as mesmas não "
"parecem ser imagens ISO válidas do instalador."

#. Type: note
#. Description
#. :sl3:
#: ../iso-scan.templates:12001
msgid "Successfully mounted ${SUITE} installer ISO image"
msgstr "Imagem ISO do instalador ${SUITE} montada com sucesso"

#. Type: note
#. Description
#. :sl3:
#: ../iso-scan.templates:12001
msgid ""
"The ISO file ${FILENAME} on ${DEVICE} (${SUITE}) will be used as the "
"installation ISO image."
msgstr ""
"O arquivo ISO ${FILENAME} em ${DEVICE} (${SUITE}) será usado como a imagem "
"ISO de instalação."

#. Type: select
#. Choices
#. :sl3:
#: ../iso-scan.templates:14001
#, fuzzy
#| msgid "Available devices:"
msgid "All detected devices"
msgstr "Dispositivos disponíveis:"

#. Type: select
#. Choices
#. :sl3:
#: ../iso-scan.templates:14001
msgid "${DEVICES_LIST}"
msgstr ""

#. Type: select
#. Choices
#. :sl3:
#: ../iso-scan.templates:14001
#, fuzzy
#| msgid "Enter manually"
msgid "Enter device manually"
msgstr "Informar manualmente"

#. Type: select
#. Description
#. :sl3:
#: ../iso-scan.templates:14002
#, fuzzy
#| msgid "Device for boot loader installation:"
msgid "Device or partition to search for installation ISO(s):"
msgstr "Dispositivo no qual instalar o carregador de inicialização:"

#. Type: select
#. Description
#. :sl3:
#: ../iso-scan.templates:14002
msgid ""
"You can select a device, manually specify a non-detected device, or rescan "
"available devices (useful for slow USB devices)."
msgstr ""

#. Type: string
#. Description
#. :sl3:
#: ../iso-scan.templates:15001
#, fuzzy
#| msgid "Device:"
msgid "Device name:"
msgstr "Dispositivo:"

#. Type: select
#. Choices
#. :sl3:
#: ../iso-scan.templates:16001
msgid "Full search"
msgstr ""

#. Type: select
#. Description
#. :sl3:
#: ../iso-scan.templates:16002
#, fuzzy
#| msgid "Services to use:"
msgid "ISO file to use:"
msgstr "Serviços a serem usados:"

#. Type: select
#. Description
#. :sl3:
#: ../iso-scan.templates:16002
msgid ""
"One or multiple ISO files have been detected on the selected device(s). "
"Please choose which one you want to use, or ask for a more thorough search."
msgstr ""

#. Type: boolean
#. Description
#. :sl3:
#: ../iso-scan.templates:17001
msgid "Is ISO file ${FILENAME} the correct image for installation?"
msgstr ""

#. Type: boolean
#. Description
#. :sl3:
#: ../iso-scan.templates:17001
#, fuzzy
#| msgid ""
#| "The ISO file ${FILENAME} on ${DEVICE} (${SUITE}) will be used as the "
#| "installation ISO image."
msgid ""
"The ISO file ${FILENAME} on ${DEVICE} (${SUITE}, code ${CODENAME}, self-"
"described as '${DESCRIPTION}') will be used as the installation ISO image."
msgstr ""
"O arquivo ISO ${FILENAME} em ${DEVICE} (${SUITE}) será usado como a imagem "
"ISO de instalação."

#. Type: boolean
#. Description
#. :sl3:
#: ../iso-scan.templates:17001
msgid ""
"If multiple ISO files exist on the same installer drive, you may select "
"which one you want to use."
msgstr ""

#. Type: note
#. Description
#. :sl3:
#: ../save-logs.templates:5001
msgid "Web server started, but network not running"
msgstr "Servidor Web iniciado, mas rede não está em funcionamento."

#. Type: note
#. Description
#. :sl3:
#: ../save-logs.templates:5001
msgid ""
"A simple web server has been started on this computer to serve log files and "
"debug info. However, the network is not set up yet. The web server will be "
"left running, and will be accessible once the network is configured."
msgstr ""
"Um servidor Web simples foi iniciado neste computador para servir os "
"arquivos de log e informações de depuração. Porém, a rede ainda não foi "
"configurada. O servidor Web será mantido em execução e será acessível uma "
"vez que a rede esteja configurada."

#. Type: note
#. Description
#. :sl3:
#: ../save-logs.templates:6001
msgid "Web server started"
msgstr "Servidor Web iniciado"

#. Type: note
#. Description
#. :sl3:
#: ../save-logs.templates:6001
msgid ""
"A simple web server has been started on this computer to serve log files and "
"debug info. An index of all the available log files can be found at http://";
"${ADDRESS}/"
msgstr ""
"Um servidor Web simples foi iniciado neste computador para servir os "
"arquivos de log e informações de depuração. Um índice de todos os arquivos "
"de log disponíveis pode ser encontrado em http://${ADDRESS}/";

#. Type: boolean
#. Description
#. :sl3:
#: ../cdrom-checker.templates:1001
msgid "Check CD-ROM integrity?"
msgstr "Checar integridade do CD-ROM?"

#. Type: boolean
#. Description
#. :sl3:
#: ../cdrom-checker.templates:1001
msgid "Warning: this check depends on your hardware and may take some time."
msgstr "Aviso: esta checagem depende de seu hardware e pode levar algum tempo."

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:2001
msgid "Insert a Debian CD-ROM"
msgstr "Insira um CD-ROM Debian"

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:2001
msgid ""
"Please insert one of the official Debian CD-ROMs into the drive before "
"continuing."
msgstr ""
"Por favor, insira um dos CD-ROMs oficiais Debian no leitor de CDs antes de "
"continuar."

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:3001
msgid "Failed to mount CD-ROM"
msgstr "Falha ao montar CD-ROM"

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:3001
msgid ""
"The CD-ROM ${CDROM} could not be mounted correctly. Please check the media "
"and cables, and try it again."
msgstr ""
"Não foi possível montar o CD-ROM ${CDROM} corretamente. Por favor cheque a "
"mídia e os cabos e tente novamente."

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:4001
msgid "No valid Debian CD-ROM"
msgstr "Não é um CDROM Debian válido"

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:4001
msgid ""
"The CD-ROM you have inserted is not a valid Debian CD-ROM. Please change the "
"disk."
msgstr "O CD-ROM inserido não é um CD-ROM Debian válido. Por favor troque-o."

#. Type: error
#. Description
#. TRANSLATORS: MD5 is a file name, don't translate it.
#. :sl3:
#: ../cdrom-checker.templates:5001
msgid "Failed to open checksum file"
msgstr "Falha ao abrir arquivo checksum"

#. Type: error
#. Description
#. TRANSLATORS: MD5 is a file name, don't translate it.
#. :sl3:
#: ../cdrom-checker.templates:5001
msgid ""
"Opening the MD5 file on the CD-ROM failed. This file contains the checksums "
"of the files located on the CD-ROM."
msgstr ""
"A abertura do arquivo MD5 no CD-ROM falhou. Esse arquivo contém os checksums "
"dos arquivos localizados no CD-ROM."

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:6001
msgid "Integrity test successful"
msgstr "Teste de integridade realizado com sucesso"

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:6001
msgid "The CD-ROM integrity test was successful. The CD-ROM is valid."
msgstr "A checagem de integridade do CD-ROM foi um sucesso. O CD-ROM é válido."

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:7001
msgid "Integrity test failed"
msgstr "Teste de integridade falhou"

#. Type: error
#. Description
#. :sl3:
#: ../cdrom-checker.templates:7001
msgid ""
"The ${FILE} file failed the MD5 checksum verification. Your CD-ROM or this "
"file may have been corrupted."
msgstr ""
"A verificação do checksum MD5 do arquivo ${FILE} falhou. Seu CD-ROM ou esse "
"arquivo podem estar corrompidos."

#. Type: boolean
#. Description
#. :sl3:
#: ../cdrom-checker.templates:8001
msgid "Check the integrity of another CD-ROM?"
msgstr "Checar a integridade de outro CD-ROM?"

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:9001
msgid "Insert Debian boot CD-ROM"
msgstr "Insira um CD-ROM Debian"

#. Type: note
#. Description
#. :sl3:
#: ../cdrom-checker.templates:9001
msgid ""
"Please make sure you have inserted the Debian boot CD-ROM  to continue with "
"the installation."
msgstr ""
"Por favor, certifique-se de ter inserido o CD-ROM de inicialização (boot) do "
"Debian para continuar com a instalação."

#. Type: text
#. Description
#. :sl3:
#: ../cdrom-checker.templates:10001
msgid "Checking CD-ROM integrity"
msgstr "Checando integridade do CD-ROM"

#. Type: text
#. Description
#. :sl3:
#: ../cdrom-checker.templates:11001
msgid "Checking file: ${FILE}"
msgstr "Checando arquivo: ${FILE}"

#. Type: text
#. Description
#. :sl3:
#: ../live-installer.templates:1001
msgid "Install the system"
msgstr "Instalar o sistema"

#. Type: text
#. Description
#. :sl3:
#: ../live-installer.templates:2001
msgid "Installing the system..."
msgstr "Instalando o sistema..."

#. Type: text
#. Description
#. :sl3:
#: ../live-installer.templates:3001
msgid "Copying data to disk..."
msgstr "Copiando dados para o disco..."

#. Type: text
#. Description
#. :sl3:
#. This string appears when the live-installer package
#. drop network settings that are used only by the
#. Live system
#: ../live-installer.templates:4001
msgid "Cleaning up network settings..."
msgstr "Limpando configurações de rede..."

#. Type: text
#. Description
#. :sl3:
#: ../live-installer.templates:5001
msgid "Removing packages specific to the live system..."
msgstr "Removendo pacotes específicos do sistema \"live\"..."

#. Type: text
#. Description
#. :sl3:
#: ../live-installer.templates:6001
msgid "Reconfiguring X.org..."
msgstr "Reconfigurando o X.org..."

#. Type: select
#. Choices
#. :sl3:
#: ../live-installer.templates:8001
msgid "normal"
msgstr "normal"

#. Type: select
#. Choices
#. :sl3:
#: ../live-installer.templates:8001
msgid "live"
msgstr "live"

#. Type: select
#. Description
#. :sl3:
#: ../live-installer.templates:8002
msgid "Type of installation:"
msgstr "Tipo da instalação:"

#. Type: select
#. Description
#. :sl3:
#: ../live-installer.templates:8002
msgid ""
"The live system can be installed to hard disk using one of the following "
"options."
msgstr ""
"O sistema 'live' pode ser instalado no disco rígido usando uma das seguintes "
"opções."

#. Type: select
#. Description
#. :sl3:
#: ../live-installer.templates:8002
msgid ""
"If you choose 'normal', the system will be installed as a regular system. If "
"you choose 'live', the installed system will continue to act as a live "
"system but it can then be launched directly from the hard disk."
msgstr ""
"Se você escolher a opção 'normal', o sistema será instalado como um sistema "
"regular. Se você escolher a opção 'live', o sistema instalado continuará "
"agindo como um sistema 'live' mas que pode ser iniciado a partir do disco "
"rígido."

#. Type: title
#. Description
#. :sl3:
#: ../debian-installer-launcher.templates:1001
msgid "Kernel version mismatch"
msgstr "Versão de kernel não combina"

#. Type: error
#. Description
#. :sl3:
#: ../debian-installer-launcher.templates:2001
msgid "Live system kernel and installer kernel don't match"
msgstr "Kernel do sistema \"live\" e kernel do instalador não combinam"

#. Type: error
#. Description
#. :sl3:
#. Both LIVE_KERNEL and DI_KERNEL are kernel version numbers, such as
#. 2.6.32-5-486, 2.6.32-5-amd64, or 2.6.32-5-powerpc etc.
#: ../debian-installer-launcher.templates:2001
msgid ""
"The installer can only be used if the kernel versions of the live system "
"(${LIVE_KERNEL}) and of the installer (${DI_KERNEL}) are the same."
msgstr ""
"O instalador só pode ser usado se as versões de kernel do sistema \"live"
"\"(${LIVE_KERNEL}) e do instalador (${DI_KERNEL}) forem as mesmas."

#. Type: error
#. Description
#. :sl3:
#. Both LIVE_KERNEL and DI_KERNEL are kernel version numbers, such as
#. 2.6.32-5-486, 2.6.32-5-amd64, or 2.6.32-5-powerpc etc.
#: ../debian-installer-launcher.templates:2001
msgid "Please reboot with the correct kernel (${DI_KERNEL})."
msgstr "Por favor, reinicialize com o kernel correto (${DI_KERNEL})."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl4:
#. Type: boolean
#. Description
#. :sl4:
#. Type: boolean
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl3:
#: ../partman-ext2r0.templates:9001 ../partman-ext2r0.templates:10001
#: ../partman-ext2r0.templates:11001 ../partman-ufs.templates:6001
msgid ""
"If you do not go back to the partitioning menu and correct this error, the "
"partition will be used as is.  This means that you may not be able to boot "
"from your hard disk."
msgstr ""
"Se você não voltar ao menu de particionamento e corrigir este erro, a "
"partição será usada da maneira como está. Isto significa que você pode não "
"conseguir inicializar seu computador a partir do disco rígido."

#. Type: text
#. Description
#. :sl3:
#. File system name (untranslatable in many languages)
#. Type: text
#. Description
#. :sl3:
#. Short file system name (untranslatable in many languages)
#. Type: text
#. Description
#. :sl3:
#. Short file system name (untranslatable in many languages)
#: ../partman-ufs.templates:1001 ../partman-ufs.templates:3001
#: ../partman-ufs.templates:4001
msgid "ufs"
msgstr "ufs"

#. Type: text
#. Description
#. :sl3:
#. File system name
#. Type: text
#. Description
#. :sl3:
#. File system name
#: ../partman-ufs.templates:2001 ../partman-ufs.templates:5001
msgid "UFS file system"
msgstr "sistema de arquivos UFS"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-ufs.templates:6001
#, fuzzy
#| msgid ""
#| "Your root partition has not been configured with the UFS file system. "
#| "This is needed by your machine in order to boot. Please go back and use "
#| "UFS file system."
msgid ""
"Your root partition has not been configured with a bootable file system. "
"This is needed by your machine in order to boot. Please go back and use "
"either the UFS or the ZFS file system."
msgstr ""
"Sua partição raiz não foi configurada com o sistema de arquivos UFS. Isto é "
"necessário para que seu computador possa inicializar. Por favor, volte e use "
"o sistemas de arquivos UFS."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-zfs.templates:10001 ../partman-lvm.templates:10001
msgid "Display configuration details"
msgstr "Exibir detalhes de configuração"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-zfs.templates:13001 ../partman-lvm.templates:15001
msgid "Create logical volume"
msgstr "Criar volume lógico"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-zfs.templates:14001 ../partman-lvm.templates:16001
msgid "Delete logical volume"
msgstr "Excluir volume lógico"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. :sl5:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. :sl5:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. :sl5:
#. TRANSLATORS, please translate "Finish" the same way you translate it in
#. the 'Select "Finish" at the bottom of the list when you are done' string
#: ../partman-zfs.templates:15001 ../mdcfg-utils.templates:3001
#: ../partman-md.templates:5001 ../partman-lvm.templates:17001
#: ../partman-crypto.templates:55001 ../partconf.templates:3001
#: ../partitioner.templates:1001 ../s390-dasd.templates:1001
msgid "Finish"
msgstr "Finalizar"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:17001 ../partman-lvm.templates:20001
msgid "An error occurred while writing the changes to the disks."
msgstr "Um erro ocorreu durante a gravação das mudanças nos discos."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#. :sl3:
#. Type: multiselect
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#. :sl3:
#. Type: multiselect
#. Description
#. :sl3:
#. Type: multiselect
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-zfs.templates:22001 ../lvmcfg-utils.templates:5001
#: ../lvmcfg-utils.templates:17001 ../partman-lvm.templates:26001
#: ../partman-lvm.templates:39001 ../partman-lvm.templates:44001
#: ../partman-crypto.templates:56001
msgid "You can select one or more devices."
msgstr "Você pode selecionar um ou mais dispositivos."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:26001 ../lvmcfg-utils.templates:7001
#: ../lvmcfg-utils.templates:18001 ../partman-lvm.templates:28001
#: ../partman-lvm.templates:40001 ../partman-lvm.templates:45001
msgid "No physical volumes selected"
msgstr "Nenhum volume físico selecionado"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#: ../partman-zfs.templates:35001 ../lvmcfg-utils.templates:27001
#: ../partman-lvm.templates:48001
msgid "Logical volume name:"
msgstr "Nome do Volume Lógico:"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#: ../partman-zfs.templates:35001 ../lvmcfg-utils.templates:27001
#: ../partman-lvm.templates:48001
msgid "Please enter the name you would like to use for the new logical volume."
msgstr ""
"Por favor, informe o nome que você gostaria de usar para o novo Volume "
"Lógico."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:37001 ../lvmcfg-utils.templates:29001
#: ../partman-lvm.templates:50001
msgid "No logical volume name entered"
msgstr "Nenhum nome de Volume Lógico informado"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:37001 ../partman-lvm.templates:50001
#, fuzzy
#| msgid ""
#| "No name for the logical volume has been entered.  Please enter a name."
msgid "No name for the logical volume has been entered. Please enter a name."
msgstr ""
"Nenhum nome de Volume Lógico foi informado, Por favor, informe um nome."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:38001 ../partman-zfs.templates:40001
#: ../lvmcfg-utils.templates:30001 ../lvmcfg-utils.templates:32001
#: ../partman-lvm.templates:51001 ../partman-lvm.templates:53001
msgid "Error while creating a new logical volume"
msgstr "Erro na criação de um novo Volume Lógico"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#: ../partman-zfs.templates:39001 ../lvmcfg-utils.templates:31001
#: ../partman-lvm.templates:52001
msgid "Logical volume size:"
msgstr "Tamanho do Volume Lógico:"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#: ../partman-zfs.templates:39001 ../lvmcfg-utils.templates:31001
#: ../partman-lvm.templates:52001
msgid ""
"Please enter the size of the new logical volume. The size may be entered in "
"the following formats: 10K (Kilobytes), 10M (Megabytes), 10G (Gigabytes), "
"10T (Terabytes). The default unit is Megabytes."
msgstr ""
"Por favor, informe o tamanho do novo Volume Lógico. O tamanho pode ser "
"informado nos seguintes formatos: 10K (Kilobytes), 10M (Megabytes), 10G "
"(Gigabytes), 10T (Terabytes). A unidade padrão é em Megabytes."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:40001 ../lvmcfg-utils.templates:32001
#: ../partman-lvm.templates:53001
msgid ""
"Unable to create a new logical volume (${LV}) on ${VG} with the new size "
"${SIZE}."
msgstr ""
"Não foi possível criar um novo volume lógico (${LV}) em ${VG} com o novo "
"tamanho ${SIZE}."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:41001 ../lvmcfg-utils.templates:35001
#: ../partman-lvm.templates:54001
msgid "No logical volume found"
msgstr "Nenhum Volume Lógico encontrado"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:41001 ../partman-lvm.templates:54001
#, fuzzy
#| msgid ""
#| "No logical volume has been found.  Please create a logical volume first."
msgid "No logical volume has been found. Please create a logical volume first."
msgstr ""
"Nenhum Volume Lógico foi encontrado. Por favor, crie um Volume Lógico "
"primeiro."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl3:
#: ../partman-zfs.templates:42001 ../lvmcfg-utils.templates:36001
#: ../partman-lvm.templates:55001
msgid "Logical volume:"
msgstr "Volume Lógico:"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl3:
#: ../partman-zfs.templates:42001 ../partman-lvm.templates:55001
msgid "Please select the logical volume to delete."
msgstr "Por favor, selecione o volume lógico a ser excluído."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#: ../partman-zfs.templates:43001 ../partman-lvm.templates:56001
msgid "in VG ${VG}"
msgstr "no VG ${VG}"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:44001 ../lvmcfg-utils.templates:37001
#: ../partman-lvm.templates:57001
msgid "Error while deleting the logical volume"
msgstr "Erro na remoção do Volume Lógico"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:44001 ../partman-lvm.templates:57001
#, fuzzy
#| msgid "The logical volume (${LV}) on ${VG} could not be deleted."
msgid "The logical volume ${LV} on ${VG} could not be deleted."
msgstr "Não foi possível excluir o Volume Lógico (${LV}) em ${VG}."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:45001 ../lvmcfg-utils.templates:38001
#: ../partman-lvm.templates:58001
msgid "No usable physical volumes found"
msgstr "Nenhum volume físico utilizável encontrado"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-zfs.templates:47001 ../partman-lvm.templates:61001
msgid "Please choose a different name."
msgstr "Por favor, escolha um nome diferente."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl3:
#: ../partman-zfs.templates:48001 ../partman-lvm.templates:62001
msgid "Remove existing logical volume data?"
msgstr "Remover dados de volumes lógicos existentes?"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl3:
#: ../partman-zfs.templates:48001 ../partman-lvm.templates:62001
msgid ""
"Note that this will also permanently erase any data currently on the logical "
"volumes."
msgstr ""
"Note que isto apagará permanentemente quaisquer dados que estejam atualmente "
"nos volumes lógicos."

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:2001
msgid "Multidisk (MD) not available"
msgstr "Multidisco (MD) não disponível"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:2001
msgid ""
"The current kernel doesn't seem to support multidisk devices. This should be "
"solved by loading the needed modules."
msgstr ""
"O kernel atual parece não suportar dispositivos multidisco. Isso poderá ser "
"solucionado carregando os módulos necessários."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../mdcfg-utils.templates:3001 ../partman-md.templates:5001
msgid "Create MD device"
msgstr "Criar dispositivo MD"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../mdcfg-utils.templates:3001 ../partman-md.templates:5001
msgid "Delete MD device"
msgstr "Excluir dispositivo MD"

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:3002
msgid "Multidisk configuration actions"
msgstr "Ações de configuração multidisco:"

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:3002
msgid "This is the Multidisk (MD) and software RAID configuration menu."
msgstr "Este é o menu de configuração Multidisco (MD) e RAID via software."

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:3002
msgid ""
"Please select one of the proposed actions to configure multidisk devices."
msgstr ""
"Por favor, selecione uma das ações propostas para configurar dispositivos "
"multidisco."

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:4001 ../partman-md.templates:7001
msgid "No RAID partitions available"
msgstr "Nenhuma partição RAID disponível"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:4001
msgid ""
"No unused partitions of the type \"Linux RAID Autodetect\" are available. "
"Please create such a partition, or delete an already used multidisk device "
"to free its partitions."
msgstr ""
"Nenhuma partição não utilizada do tipo \"Linux RAID Autodetect\" está "
"disponível. Por favor, crie uma partição desse tipo ou exclua um dispositivo "
"multidisco já usado para liberar suas partições."

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:4001 ../partman-md.templates:7001
msgid ""
"If you have such partitions, they might contain actual file systems, and are "
"therefore not available for use by this configuration utility."
msgstr ""
"Caso você possua partições desse tipo, as mesmas podem contém sistemas de "
"arquivos e portanto não estarão disponíveis para serem usados por este "
"utilitário de configuração."

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:5001 ../partman-md.templates:13001
msgid "Not enough RAID partitions available"
msgstr "Partições RAID disponíveis não são o bastante"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:5001 ../partman-md.templates:13001
msgid ""
"There are not enough RAID partitions available for your selected "
"configuration.  You have ${NUM_PART} RAID partitions available but your "
"configuration requires ${REQUIRED} partitions."
msgstr ""
"Não existem partições RAID disponíveis o bastante para a configuração "
"selecionada. Você possui ${NUM_PART} partições RAID disponíveis mas sua "
"configuração requer ${REQUIRED} partições."

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:6002
msgid "Multidisk device type:"
msgstr "Tipo de dispositivo multidisco:"

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:6002
msgid "Please choose the type of the multidisk device to be created."
msgstr "Por favor, selecione o tipo de dispositivo multidisco a ser criado."

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:7001
msgid "Active devices for the RAID0 multidisk device:"
msgstr "Dispositivos ativos para o dispositivo multidisco RAID0:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:7001 ../partman-md.templates:8001
msgid ""
"You have chosen to create a RAID0 array. Please choose the active devices in "
"this array."
msgstr ""
"Você optou por criar um agrupamento RAID0. Por favor, escolha os "
"dispositivos ativos no agrupamento."

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:8001 ../partman-md.templates:9001
msgid "Number of active devices for the RAID${LEVEL} array:"
msgstr "Número de dispositivos ativos para o agrupamento RAID${LEVEL}:"

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:8001
msgid ""
"The RAID${LEVEL} array will consist of both active and spare partitions. The "
"active partitions are those used, while the spare devices will only be used "
"if one or more of the active devices fail. A minimum of ${MINIMUM} active "
"devices is required."
msgstr ""
"O agrupamento RAID${LEVEL} será composto de partições ativas e partições "
"reserva (\"spare\"). As partições ativas são as partições usadas e os "
"dispositivos reserva somente serão usados caso um ou mais dispositivos "
"ativos falhem. Um mínimo de ${MINIMUM} dispositivos ativos são necessários."

#. Type: string
#. Description
#. :sl3:
#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:8001 ../mdcfg-utils.templates:12001
#: ../partman-md.templates:9001 ../partman-md.templates:14001
msgid "NOTE: this setting cannot be changed later."
msgstr "NOTA: não será possível mudar essa configuração posteriormente."

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:9001
msgid "Active devices for the RAID${LEVEL} multidisk device:"
msgstr "Dispositivos ativos para o dispositivo multidisco RAID${LEVEL}:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:9001 ../partman-md.templates:10001
msgid ""
"You have chosen to create a RAID${LEVEL} array with ${COUNT} active devices."
msgstr ""
"Você optou por criar um agrupamento RAID${LEVEL} com ${COUNT} dispositivos "
"ativos."

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:9001 ../partman-md.templates:10001
msgid ""
"Please choose which partitions are active devices. You must select exactly "
"${COUNT} partitions."
msgstr ""
"Por favor, selecione quais partições são dispositivos ativos. Você deve "
"selecionar exatamente ${COUNT} partições."

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:10001 ../partman-md.templates:11001
msgid "Number of spare devices for the RAID${LEVEL} array:"
msgstr "Número de dispositivos reserva para o agrupamento RAID${LEVEL}:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:11001
msgid "Spare devices for the RAID${LEVEL} multidisk device:"
msgstr "Dispositivos reserva para o dispositivo multidisco RAID${LEVEL}:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:11001 ../partman-md.templates:12001
msgid ""
"You have chosen to create a RAID${LEVEL} array with ${COUNT} spare devices."
msgstr ""
"Você optou por criar um agrupamento RAID${LEVEL} com ${COUNT} dispositivos "
"reserva."

#. Type: multiselect
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:11001
msgid ""
"Please choose which partitions will be used as spare devices. You may choose "
"up to ${COUNT} partitions. If you choose less than ${COUNT} devices, the "
"remaining partitions will be added to the array as \"missing\". You will be "
"able to add them later to the array."
msgstr ""
"Por favor, selecione quais partições serão usadas como dispositivos reserva. "
"Você pode selecionar no máximo ${COUNT} partições. Caso você selecione menos "
"de ${COUNT} dispositivos, as partições restantes serão adicionadas ao "
"agrupamento como \"faltante\" (ou \"missing\"). Você poderá adicioná-las "
"posteriormente ao agrupamento."

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:12001
msgid "Layout of the RAID10 multidisk device:"
msgstr "Layout do dispositivo multidisco RAID10:"

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:12001 ../partman-md.templates:14001
msgid ""
"The layout must be n, o, or f (arrangement of the copies) followed by a "
"number (number of copies of each chunk). The number must be smaller or equal "
"to the number of active devices."
msgstr ""
"O layout deve ser n, o ou f (arranjo das cópias) seguido por um número "
"(número de cópias de cada pedaço -- \"chunk\"). O número deve ser menor ou "
"igual ao número de dispositivos ativos."

#. Type: string
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:12001 ../partman-md.templates:14001
msgid ""
"The letter is the arrangement of the copies:\n"
" n - near copies: Multiple copies of one data block are at similar\n"
"     offsets in different devices.\n"
" f - far copies: Multiple copies have very different offsets\n"
" o - offset copies: Rather than the chunks being duplicated within a\n"
"     stripe, whole stripes are duplicated but are rotated by one\n"
"     device so duplicate blocks are on different devices."
msgstr ""
"A letra é o arranjo das cópias:\n"
" n - cópias próximas: Múltiplas cópias de um bloco de dados estão em\n"
"     posições similares em dispositivos diferentes.\n"
" f - cópias distantes: Múltiplas cópias possuem posições muito diferentes.\n"
" o - cópias deslocadas: Ao invés dos pedaços (\"chunks\") serem duplicados\n"
"     dentro de uma faixa (\"stripe\"), faixas inteiras são duplicadas mas\n"
"     são rotacionadas em um dispositivo de forma que blocos duplicados\n"
"     estejam em dispositivos diferentes."

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:13002
msgid "Multidisk device to be deleted:"
msgstr "Dispositivo multidisco a ser excluído:"

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:13002
msgid ""
"Deleting a multidisk device will stop it and clear the superblock of all its "
"components."
msgstr ""
"A remoção de um dispositivo multidisco irá pará-lo e limpar o superbloco de "
"todos os seus componentes."

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:13002
msgid ""
"Please note this will not immediately allow you to reuse the partitions or "
"devices in a new multidisk device. The array will however be unusable after "
"the deletion."
msgstr ""
"Por favor, note que isso não irá imediatamente permitir que você reutilize "
"as partições ou os dispositivos em um novo dispositivo multidisco. No "
"entanto, agrupamento estará inutilizável depois da exclusão."

#. Type: select
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:13002 ../partman-md.templates:15001
msgid ""
"If you select a device for deletion, you will get some information about it "
"and you will be given the option of aborting this operation."
msgstr ""
"Caso você selecione um dispositivo para remoção, algumas informações sobre o "
"mesmo serão exibidas e você terá a opção de abortar essa operação."

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:14001
msgid "No multidisk devices available"
msgstr "Nenhum dispositivo multidisco disponível"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:14001
msgid "No multidisk devices are available for deletion."
msgstr "Não existem dispositivos multidisco disponíveis para serem removidos."

#. Type: boolean
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:15001
msgid "Really delete this multidisk device?"
msgstr "Realmente excluir este dispositivo multidisco?"

#. Type: boolean
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:15001
msgid ""
"Please confirm whether you really want to delete the following multidisk "
"device:"
msgstr ""
"Por favor, confirme se você realmente deseja excluir o seguinte dispositivo "
"multidisco:"

#. Type: boolean
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:15001 ../partman-md.templates:17001
msgid ""
" Device:            ${DEVICE}\n"
" Type:              ${TYPE}\n"
" Component devices:"
msgstr ""
" Dispositivo:       ${DEVICE}\n"
" Tipo:              ${TYPE}\n"
" Dispositivos que o compõem:"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:16001
msgid "Failed to delete the multidisk device"
msgstr "Falha ao excluir o dispositivo multidisco"

#. Type: error
#. Description
#. :sl3:
#: ../mdcfg-utils.templates:16001
msgid "There was an error deleting the multidisk device. It may be in use."
msgstr ""
"Um erro ocorreu na remoção do dispositivo multidisco. O mesmo pode estar em "
"uso."

#. Type: boolean
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:1001
msgid "Activate existing volume groups?"
msgstr "Ativar Grupos de Volumes existentes?"

#. Type: boolean
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:1001
msgid ""
"${COUNT} existing volume groups have been found. Please indicate whether you "
"want to activate them."
msgstr ""
"${COUNT} Grupos de Volumes foram encontrados. Por favor indique se você "
"deseja ativá-los."

#. Type: select
#. Choices
#. :sl3:
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001
msgid "Modify volume groups (VG)"
msgstr "Modificar grupos de volumes (VG)"

#. Type: select
#. Choices
#. :sl3:
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001
msgid "Modify logical volumes (LV)"
msgstr "Modificar volumes lógicos (LV)"

#. Type: select
#. Choices
#. :sl3:
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. Type: select
#. Choices
#. :sl3:
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. Type: select
#. Choices
#. :sl3:
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001 ../lvmcfg-utils.templates:3001
#: ../lvmcfg-utils.templates:4001
msgid "Leave"
msgstr "Sair"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:2002 ../partman-lvm.templates:24001
msgid "LVM configuration action:"
msgstr "Ação de configuração LVM:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:2002
msgid "This is the Logical Volume Manager configuration menu."
msgstr "Este é o menu de configuração do Gerenciador de Volumes Lógicos."

#. Type: select
#. Choices
#. :sl3:
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Create volume groups"
msgstr "Criar grupos de volumes"

#. Type: select
#. Choices
#. :sl3:
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Delete volume groups"
msgstr "Excluir grupos de volume"

#. Type: select
#. Choices
#. :sl3:
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Extend volume groups"
msgstr "Estender grupos de volume"

#. Type: select
#. Choices
#. :sl3:
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Reduce volume groups"
msgstr "Reduzir grupos de volume"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:3002
msgid "Volume groups configuration action:"
msgstr "Ação de configuração dos Grupos de Volumes:"

#. Type: select
#. Choices
#. :sl3:
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:4001
msgid "Create logical volumes"
msgstr "Criar volumes lógicos"

#. Type: select
#. Choices
#. :sl3:
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:4001
msgid "Delete logical volumes"
msgstr "Excluir volumes lógicos"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:4002
msgid "Logical volumes configuration action:"
msgstr "Ação de configuração dos Volumes Lógicos:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:5001 ../partman-lvm.templates:26001
msgid "Devices for the new volume group:"
msgstr "Dispositivos para o novo Grupo de Volume:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:5001 ../partman-lvm.templates:26001
msgid "Please select the devices for the new volume group."
msgstr "Por favor, selecione os dispositivos para o novo Grupo de Volume."

#. Type: string
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:6001 ../partman-lvm.templates:27001
msgid "Volume group name:"
msgstr "Nome do Grupo de Volume:"

#. Type: string
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:6001 ../partman-lvm.templates:27001
msgid "Please enter the name you would like to use for the new volume group."
msgstr ""
"Por favor, informe o nome que você gostaria de usar para o novo Grupo de "
"Volume."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:7001
msgid ""
"No physical volumes were selected. The creation of a new volume group was "
"aborted."
msgstr ""
"Nenhum volume físico foi selecionado. A criação de um novo Grupo de Volume "
"foi abortada."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:8001 ../partman-lvm.templates:29001
msgid "No volume group name entered"
msgstr "Nenhum nome de Grupo de Volume informado"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:8001
msgid "No name for the volume group has been entered.  Please enter a name."
msgstr ""
"Nenhum nome de Grupo de Volume foi informado. Por favor, informe um nome."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:9001 ../partman-lvm.templates:30001
#: ../partman-auto-lvm.templates:6001
msgid "Volume group name already in use"
msgstr "Nome do Grupo de Volume já em uso"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:9001 ../partman-auto-lvm.templates:3001
msgid ""
"The selected volume group name is already in use. Please choose another name."
msgstr ""
"O nome do Grupo de Volume selecionado já está em uso. Por favor, selecione "
"um outro nome."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:10001 ../partman-lvm.templates:31001
msgid "Volume group name overlaps with device name"
msgstr "Nome do Grupo de Volume conflita com nome de dispositivo"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:10001
msgid ""
"The selected volume group name overlaps with an existing device name. Please "
"choose another name."
msgstr ""
"O nome do Grupo de Volume selecionado conflita com um nome de dispositivo "
"existente. Por favor, selecione um outro nome."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:11001 ../partman-lvm.templates:33001
msgid "Volume group to delete:"
msgstr "Grupo de Volume a ser excluído:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:11001 ../partman-lvm.templates:33001
msgid "Please select the volume group you wish to delete."
msgstr "Por favor, selecione o Grupo de Volume que você deseja excluir."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:12001 ../lvmcfg-utils.templates:15001
#: ../lvmcfg-utils.templates:20001 ../lvmcfg-utils.templates:25001
#: ../lvmcfg-utils.templates:26001 ../lvmcfg-utils.templates:33001
#: ../partman-lvm.templates:34001 ../partman-lvm.templates:37001
#: ../partman-lvm.templates:42001 ../partman-lvm.templates:47001
msgid "No volume group found"
msgstr "Nenhum Grupo de Volume foi encontrado"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:12001 ../lvmcfg-utils.templates:15001
#: ../lvmcfg-utils.templates:20001 ../partman-lvm.templates:34001
#: ../partman-lvm.templates:37001 ../partman-lvm.templates:42001
msgid "No volume group has been found."
msgstr "Nenhum Grupo de Volume foi encontrado."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:12001 ../partman-lvm.templates:34001
msgid "The volume group may have already been deleted."
msgstr "O Grupo de Volume pode já ter sido excluído."

#. Type: boolean
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:13001 ../partman-lvm.templates:35001
msgid "Really delete the volume group?"
msgstr "Realmente excluir o Grupo de Volume?"

#. Type: boolean
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:13001 ../partman-lvm.templates:35001
msgid "Please confirm the ${VG} volume group removal."
msgstr "Por favor, confirme a remoção do grupo de volume ${VG}."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:14001 ../partman-lvm.templates:36001
msgid "Error while deleting volume group"
msgstr "Erro na remoção do Grupo de Volume"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:14001 ../partman-lvm.templates:36001
msgid ""
"The selected volume group could not be deleted. One or more logical volumes "
"may currently be in use."
msgstr ""
"Não foi possível excluir o Grupo de Volume selecionado. Um ou mais Volumes "
"Lógicos podem estar atualmente em uso."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:15001 ../partman-lvm.templates:37001
msgid "No volume group can be deleted."
msgstr "Não foi possível excluir nenhum Grupo de Volume."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:16001 ../partman-lvm.templates:38001
msgid "Volume group to extend:"
msgstr "Grupo de Volume a ser estendido:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:16001 ../partman-lvm.templates:38001
msgid "Please select the volume group you wish to extend."
msgstr "Por favor, selecione o Grupo de Volume que você deseja estender."

#. Type: multiselect
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:17001 ../partman-lvm.templates:39001
msgid "Devices to add to the volume group:"
msgstr "Dispositivos a adicionar ao Grupo de Volume:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:17001 ../partman-lvm.templates:39001
msgid "Please select the devices you wish to add to the volume group."
msgstr ""
"Por favor, selecione os dispositivos que você deseja adicionar ao Grupo de "
"Volume."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:18001
msgid ""
"No physical volumes were selected. Extension of the volume group was aborted."
msgstr ""
"Nenhum volume físico foi selecionado. A extensão do Grupo de Volume foi "
"abortada."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:19001 ../partman-lvm.templates:41001
msgid "Error while extending volume group"
msgstr "Erro estendendo o Grupo de Volume"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:19001 ../partman-lvm.templates:41001
msgid ""
"The physical volume ${PARTITION} could not be added to the selected volume "
"group."
msgstr ""
"Não foi possível adicionar o volume físico ${PARTITION} ao Grupo de Volume "
"selecionado."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:20001 ../partman-lvm.templates:42001
msgid "No volume group can be reduced."
msgstr "Não foi possível reduzir nenhum Grupo de Volume."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:21001 ../partman-lvm.templates:43001
msgid "Volume group to reduce:"
msgstr "Grupo de volume a ser reduzido:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:21001 ../partman-lvm.templates:43001
msgid "Please select the volume group you wish to reduce."
msgstr "Por favor, selecione o Grupo de Volume que você deseja reduzir."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:22001
msgid "Device to remove from volume group:"
msgstr "Dispositivo a ser removido do Grupo de Volume:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:22001
msgid "Please select the device you wish to remove from the volume group."
msgstr ""
"Por favor, selecione o dispositivo que você deseja remover do Grupo de "
"Volume."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:23001 ../lvmcfg-utils.templates:24001
#: ../partman-lvm.templates:32001 ../partman-lvm.templates:46001
msgid "Error while reducing volume group"
msgstr "Erro reduzindo o Grupo de Volume"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:23001
msgid ""
"The selected volume group (${VG}) could not be reduced. There is only one "
"physical volume attached. Please delete the volume group instead."
msgstr ""
"Não foi possível reduzir o Grupo de Volume selecionado (${VG}). Existe "
"somente um volume físico anexado. Por favor, ao invés disso, exclua o Grupo "
"de Volume."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:24001 ../partman-lvm.templates:46001
msgid ""
"The physical volume ${PARTITION} could not be removed from the selected "
"volume group."
msgstr ""
"Não foi possível remover o volume físico ${PARTITION} do Grupo de Volume "
"selecionado."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:25001
msgid ""
"No volume groups were found for creating a new logical volume.  Please "
"create more physical volumes and volume groups."
msgstr ""
"Não foi encontrado nenhum grupo de volume para criação de um novo volume "
"lógico. Por favor, crie mais volumes físicos e grupos de volume."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:26001 ../partman-lvm.templates:47001
msgid ""
"No free volume groups were found for creating a new logical volume. Please "
"create more physical volumes and volume groups, or reduce an existing volume "
"group."
msgstr ""
"Não foi encontrado nenhum grupo de volume livre para criação de um volume "
"lógico. Por favor, crie mais volumes físicos e grupos de volume ou reduza um "
"grupo de volume existente."

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl3:
#. Type: select
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:28001 ../lvmcfg-utils.templates:34001
#: ../partman-lvm.templates:49001
msgid "Volume group:"
msgstr "Grupo de Volume:"

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:28001 ../partman-lvm.templates:49001
msgid ""
"Please select the volume group where the new logical volume should be "
"created."
msgstr ""
"Por favor, selecione o Grupo de Volume onde o novo Volume Lógico deverá ser "
"criado."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:29001
msgid "No name for the logical volume has been entered.  Please enter a name."
msgstr ""
"Nenhum nome de Volume Lógico foi informado, Por favor, informe um nome."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:30001 ../partman-lvm.templates:51001
msgid ""
"The name ${LV} is already in use by another logical volume on the same "
"volume group (${VG})."
msgstr ""
"O nome ${LV} já está em uso por um outro Volume Lógico no mesmo Grupo de "
"Volume (${VG})."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:33001
msgid "No volume group has been found for deleting a logical volume."
msgstr "Nenhum Grupo de Volume foi encontrado para excluir um Volume Lógico."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:34001
msgid ""
"Please select the volume group which contains the logical volume to be "
"deleted."
msgstr ""
"Por favor, selecione o Grupo de Volume que contém o Volume Lógico a ser "
"excluído."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:35001
msgid ""
"No logical volume has been found.  Please create a logical volume first."
msgstr ""
"Nenhum Volume Lógico foi encontrado. Por favor, crie um Volume Lógico "
"primeiro."

#. Type: select
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:36001
msgid "Please select the logical volume to be deleted on ${VG}."
msgstr "Por favor, selecione o Volume Lógico a ser excluído em ${VG}."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:37001
msgid "The logical volume (${LV}) on ${VG} could not be deleted."
msgstr "Não foi possível excluir o Volume Lógico (${LV}) em ${VG}."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:38001 ../partman-lvm.templates:58001
msgid ""
"No physical volumes (i.e. partitions) were found in your system. All "
"physical volumes may already be in use. You may also need to load some "
"required kernel modules or re-partition the hard drives."
msgstr ""
"Nenhum volume físico (ou seja, nenhuma partição) foi encontrado em seu "
"sistema. Você pode também precisar carregar alguns módulos de kernel "
"necessários ou reparticionar os discos rígidos."

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:39001 ../partman-lvm.templates:59001
msgid "Logical Volume Manager not available"
msgstr "Gerenciador de Volumes Lógicos não disponível"

#. Type: error
#. Description
#. :sl3:
#: ../lvmcfg-utils.templates:39001 ../partman-lvm.templates:59001
msgid ""
"The current kernel doesn't support the Logical Volume Manager. You may need "
"to load the lvm-mod module."
msgstr ""
"O kernel atual não suporta o Gerenciador de Volumes Lógicos. Talvez você "
"precise carregar o módulo lvm-mod."

#. Type: text
#. Description
#. :sl3:
#: ../partman-md.templates:1001
msgid "Software RAID device"
msgstr "Dispositivo RAID via software"

#. Type: text
#. Description
#. :sl3:
#: ../partman-md.templates:2001
msgid "Configure software RAID"
msgstr "Configurar RAID via software"

#. Type: text
#. Description
#. :sl3:
#. What is "in use" is a partition
#: ../partman-md.templates:3001
msgid "In use by software RAID device ${DEVICE}"
msgstr "Em uso pelo dispositivo RAID via software ${DEVICE}"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:4001
msgid "Software RAID not available"
msgstr "RAID via software não disponível"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:4001
msgid ""
"The current kernel doesn't seem to support software RAID (MD) devices. This "
"should be solved by loading the necessary modules."
msgstr ""
"O kernel atual parece não oferece suporte a dispositivos RAID via software "
"(MD). Isto poderá ser solucionado carregando os módulos necessários."

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:5002
msgid "Software RAID configuration actions"
msgstr "Ações de configuração RAID via software"

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:5002
msgid ""
"This is the software RAID (or MD, \"multiple device\") configuration menu."
msgstr ""
"Este é o menu de configuração RAID via software (ou MD, \"múltiplos "
"dispositivos\")."

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:5002
msgid "Please select one of the proposed actions to configure software RAID."
msgstr ""
"Por favor, selecione uma das ações propostas para configurar RAID por "
"software."

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:6001
msgid "Software RAID device type:"
msgstr "Tipo de dispositivo RAID por software:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:6001
msgid "Please choose the type of the software RAID device to be created."
msgstr ""
"Por favor, selecione o tipo de dispositivo RAID por software a ser criado."

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:7001
msgid ""
"No unused partitions of the type \"Linux RAID Autodetect\" are available. "
"Please create such a partition, or delete an already used software RAID "
"device to free its partitions."
msgstr ""
"Nenhuma partição não usada do tipo \"Linux RAID Autodetect\" está "
"disponível. Por favor, crie uma partição desse tipo ou exclua um dispositivo "
"RAID por software já usado para liberar suas partições."

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-md.templates:8001
msgid "Active devices for the RAID0 array:"
msgstr "Número de dispositivos ativos para a agrupamento RAID0:"

#. Type: string
#. Description
#. :sl3:
#: ../partman-md.templates:9001
msgid ""
"The RAID${LEVEL} array will consist of both active and spare devices. The "
"active devices are those used, while the spare devices will only be used if "
"one or more of the active devices fail. A minimum of ${MINIMUM} active "
"devices is required."
msgstr ""
"O agrupamento RAID${LEVEL} será composto de dispositivos ativos e "
"dispositivos reserva (\"spare\"). Os dispositivos ativos são os que serão "
"usados e os dispositivos reserva somente serão usados caso um ou mais "
"dispositivos ativos falhem. Um mínimo de ${MINIMUM} dispositivos ativos são "
"necessários."

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-md.templates:10001
msgid "Active devices for the RAID${LEVEL} array:"
msgstr "Dispositivos ativos para o agrupamento RAID${LEVEL}:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-md.templates:12001
msgid "Spare devices for the RAID${LEVEL} array:"
msgstr "Dispositivos reserva para o agrupamento RAID${LEVEL}:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-md.templates:12001
msgid ""
"Please choose which partitions will be used as spare devices. You may choose "
"up to ${COUNT} partitions. If you choose less than ${COUNT} devices, the "
"remaining partitions will be added to the array as \"missing\". You will be "
"able to add them to the array later."
msgstr ""
"Por favor, selecione quais partições serão usadas como dispositivos reserva. "
"Você pode selecionar no máximo ${COUNT} partições. Caso você selecione menos "
"de ${COUNT} dispositivos, as partições restantes serão adicionadas ao "
"agrupamento como \"faltante\" (\"missing\"). Você poderá adicioná-las "
"posteriormente ao agrupamento."

#. Type: string
#. Description
#. :sl3:
#: ../partman-md.templates:14001
msgid "Layout of the RAID10 array:"
msgstr "Layout do agrupamento RAID10:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:15001
msgid "Software RAID device to be deleted:"
msgstr "Dispositivo RAID por software a ser excluído:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:15001
msgid ""
"Deleting a software RAID device will stop it and clear the superblock of all "
"its components."
msgstr ""
"Excluir um dispositivo RAID por software irá pará-lo e limpar o superbloco "
"de todos os seus componentes."

#. Type: select
#. Description
#. :sl3:
#: ../partman-md.templates:15001
msgid ""
"Please note this will not immediately allow you to reuse the partitions or "
"devices in a new software RAID device. The array will however be unusable "
"after the deletion."
msgstr ""
"Por favor, note que isso não permitirá que você reutilize imediatamente as "
"partições ou os dispositivos em um novo dispositivo RAID por software. No "
"entanto, o agrupamento estará inutilizável depois da exclusão."

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:16001
msgid "No software RAID devices available"
msgstr "Nenhum dispositivo RAID por software disponível"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:16001
msgid "No software RAID devices are available for deletion."
msgstr ""
"Não existem dispositivos RAID por software disponíveis para serem excluídos."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:17001
msgid "Really delete this software RAID device?"
msgstr "Realmente excluir este dispositivo RAID por software?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:17001
msgid ""
"Please confirm whether you really want to delete the following software RAID "
"device:"
msgstr ""
"Por favor, confirme se você realmente deseja excluir o seguinte dispositivo "
"RAID por software:"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:18001
msgid "Failed to delete the software RAID device"
msgstr "Falha ao excluir o dispositivo RAID por software"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:18001
msgid "There was an error deleting the software RAID device. It may be in use."
msgstr ""
"Um erro ocorreu na exclusão do dispositivo RAID por software. O mesmo pode "
"estar em uso."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:19001
msgid "Write the changes to the storage devices and configure RAID?"
msgstr ""
"Gravar as mudanças nos dispositivos de armazenamento e configurar o suporte "
"a RAID?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:19001
msgid ""
"Before RAID can be configured, the changes have to be written to the storage "
"devices.  These changes cannot be undone."
msgstr ""
"Antes que o suporte a RAID possa ser configurado, as mudanças precisam ser "
"gravadas nos dispositivos de armazenamento. Essas mudanças não poderão ser "
"desfeitas."

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:19001 ../partman-md.templates:20001
msgid ""
"When RAID is configured, no additional changes to the partitions in the "
"disks containing physical volumes are allowed.  Please convince yourself "
"that you are satisfied with the current partitioning scheme in these disks."
msgstr ""
"Quando o suporte a RAID for configurado, nenhuma mudança adicional nas "
"partições que contém os volumes físicos será permitida. Por favor, "
"certifique-se de estar satisfeito com o esquema de particionamento atual "
"usado nesses discos."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:20001
msgid "Keep current partition layout and configure RAID?"
msgstr "Manter o layout de particionamento atual e configurar RAID?"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:21001
msgid "RAID configuration failure"
msgstr "Falha na configuração RAID"

#. Type: error
#. Description
#. :sl3:
#: ../partman-md.templates:21001
msgid "RAID configuration has been aborted."
msgstr "A configuração RAID foi abortada."

#. Type: text
#. Description
#. :sl3:
#: ../partman-md.templates:22001
msgid "physical volume for RAID"
msgstr "volume físico para RAID"

#. Type: text
#. Description
#. :sl3:
#: ../partman-md.templates:23001
msgid "raid"
msgstr "raid"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:24001
msgid "Remove existing software RAID partitions?"
msgstr "Remover as partições existentes de RAID via software?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:24001
msgid ""
"The selected device contains partitions used for software RAID devices. The "
"following devices and partitions are about to be removed:"
msgstr ""
"O dispositivo selecionado possui partições usadas para dispositivos RAID via "
"software. Os seguintes dispositivos e partições estão prestes a serem "
"removidos:"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:24001
msgid "Software RAID devices about to be removed: ${REMOVED_DEVICES}"
msgstr ""
"Dispositivos RAID via softwares que estão prestes a serem removidos: "
"${REMOVED_DEVICES}"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:24001
msgid "Partitions used by these RAID devices: ${REMOVED_PARTITIONS}"
msgstr "Partições usadas por estes dispositivos RAID: ${REMOVED_PARTITIONS}"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-md.templates:24001
msgid ""
"Note that this will also permanently erase any data currently on the "
"software RAID devices."
msgstr ""
"Note que isto apagará permanentemente quaisquer dados que estejam atualmente "
"nos dispositivos RAID via software."

#. Type: text
#. Description
#. :sl3:
#: ../partman-lvm.templates:1001
msgid "Unallocated physical volumes:"
msgstr "Volumes físicos não alocados:"

#. Type: text
#. Description
#. :sl3:
#: ../partman-lvm.templates:2001
msgid "Volume groups:"
msgstr "Grupos de volume:"

#. Type: text
#. Description
#. :sl3:
#: ../partman-lvm.templates:3001
msgid "Uses physical volume:"
msgstr "Utiliza volume lógico:"

#. Type: text
#. Description
#. :sl3:
#: ../partman-lvm.templates:4001
msgid "Provides logical volume:"
msgstr "Fornece volume lógico:"

#. Type: text
#. Description
#. :sl3:
#. "none" here == "No Physical Volumes"
#: ../partman-lvm.templates:5001
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Physical Volumes:\" ]"
msgstr "nenhum"

#. Type: text
#. Description
#. :sl3:
#. "none" here == "No Volume Groups"
#: ../partman-lvm.templates:6001
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Volume Groups:\" ]"
msgstr "nenhum"

#. Type: text
#. Description
#. :sl3:
#. Translators: use the acronym for "Physical Volume" in your language here
#: ../partman-lvm.templates:8001
msgid "PV"
msgstr "VF"

#. Type: text
#. Description
#. :sl3:
#. What is "in use" is a partition
#: ../partman-lvm.templates:9001
msgid "In use by LVM volume group ${VG}"
msgstr "Em uso pelo grupo de volume LVM ${VG}"

#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:11001
msgid "Create volume group"
msgstr "Criar grupo de volume"

#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:12001
msgid "Delete volume group"
msgstr "Excluir grupo de volume"

#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:13001
msgid "Extend volume group"
msgstr "Estender grupo de volume"

#. Type: text
#. Description
#. :sl3:
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:14001
msgid "Reduce volume group"
msgstr "Reduzir grupo de volume"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:18001
msgid "Write the changes to disks and configure LVM?"
msgstr "Gravar as mudanças nos discos e configurar LVM?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:18001
#, fuzzy
#| msgid ""
#| "Before the Logical Volume Manager can be configured, the current "
#| "partitioning scheme has to be written to disk.  These changes cannot be "
#| "undone."
msgid ""
"Before the Logical Volume Manager can be configured, the current "
"partitioning scheme has to be written to disk. These changes cannot be "
"undone."
msgstr ""
"Antes que o Gerenciador de Volumes Lógicos possa ser configurado, o esquema "
"de particionamento atual precisa ser gravado em disco. Essas mudanças não "
"poderão ser desfeitas."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:18001
msgid ""
"After the Logical Volume Manager is configured, no additional changes to the "
"partitioning scheme of disks containing physical volumes are allowed during "
"the installation. Please decide if you are satisfied with the current "
"partitioning scheme before continuing."
msgstr ""
"Depois que o Gerenciador de Volumes Lógicos for configurado, nenhuma mudança "
"adicional no esquema de particionamento dos disco que contém os volumes "
"físicos será permitida. Por favor, decida se você está satisfeito com o "
"esquema de particionamento atual antes de continuar."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:19001
msgid "Keep current partition layout and configure LVM?"
msgstr "Manter o layout de particionamento atual e configurar LVM?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:19001
msgid ""
"After the Logical Volume Manager is configured, no additional changes to the "
"partitions in the disks containing physical volumes are allowed. Please "
"decide if you are satisfied with the current partitioning scheme in these "
"disks before continuing."
msgstr ""
"Depois que o Gerenciador de Volumes Lógicos for configurado, nenhuma mudança "
"adicional nos disco que contém os volumes físicos será permitida. Por favor, "
"decida se você está satisfeito com o esquema de particionamento atual nesses "
"discos antes de continuar."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:20001
msgid "LVM configuration failure"
msgstr "Configuração LVM falhou"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:20001
msgid "Logical Volume Manager configuration has been aborted."
msgstr "A configuração do Gerenciador de Volumes Lógicos foi abortada."

#. Type: text
#. Description
#. :sl3:
#: ../partman-lvm.templates:21001
msgid "physical volume for LVM"
msgstr "volume físico para LVM"

#. Type: text
#. Description
#. :sl3:
#. keep it short (ideally a 3-letter acronym)
#: ../partman-lvm.templates:22001
msgid "lvm"
msgstr "lvm"

#. Type: select
#. Description
#. :sl3:
#: ../partman-lvm.templates:24001
msgid "Summary of current LVM configuration:"
msgstr "Sumário da configuração LVM atual:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-lvm.templates:24001
msgid ""
" Free Physical Volumes:  ${FREE_PVS}\n"
" Used Physical Volumes:  ${USED_PVS}\n"
" Volume Groups:          ${VGS}\n"
" Logical Volumes:        ${LVS}"
msgstr ""
" Volumes Físicos Livres: ${FREE_PVS}\n"
" Volumes Físicos Usados: ${USED_PVS}\n"
" Grupos de Volume:       ${VGS}\n"
" Volumes Lógicos:        ${LVS}"

#. Type: note
#. Description
#. :sl3:
#: ../partman-lvm.templates:25001
msgid "Current LVM configuration:"
msgstr "Configuração LVM atual:"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:28001
msgid ""
"No physical volumes were selected. The creation of a new volume group has "
"been aborted."
msgstr ""
"Nenhum volume físico foi selecionado. A criação de um novo grupo de volume "
"foi abortada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:29001
msgid "No name for the volume group has been entered. Please enter a name."
msgstr ""
"Nenhum nome de grupo de volume foi informado. Por favor, informe um nome."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:30001
msgid ""
"The selected volume group name is already in use. Please choose a different "
"name."
msgstr ""
"O nome do grupo de volume selecionado já está em uso. Por favor, selecione "
"um nome diferente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:31001
msgid ""
"The selected volume group name overlaps with an existing device name. Please "
"choose a different name."
msgstr ""
"O nome do grupo de volume selecionado conflita com um nome de dispositivo "
"existente. Por favor, selecione um nome diferente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:32001
msgid "The volume group ${VG} could not be created."
msgstr "Não foi possível criar o grupo de volume ${VG}."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:40001
msgid ""
"No physical volumes were selected. Extension of the volume group has been "
"aborted."
msgstr ""
"Nenhum volume físico foi selecionado. A extensão do grupo de volume foi "
"abortada."

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-lvm.templates:44001
msgid "Devices to remove from the volume group:"
msgstr "Dispositivos a serem removidos do grupo de volume:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-lvm.templates:44001
msgid "Please select the devices you wish to remove from the volume group."
msgstr ""
"Por favor, selecione os dispositivos que você deseja remover do grupo de "
"volume."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:45001
msgid ""
"No physical volumes were selected. Reduction of the volume group was aborted."
msgstr ""
"Nenhum volume físico foi selecionado. A redução do grupo de volume foi "
"abortada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:60001
msgid "Error while initializing physical volume"
msgstr "Erro na inicialização do volume lógico"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:60001
msgid "The physical volume ${PV} could not be initialized."
msgstr "Não foi possível inicializar o volume físico ${PV}."

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:61001
msgid "Invalid logical volume or volume group name"
msgstr "Nome de volume lógico ou de grupo de volume inválido"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:61001
#, fuzzy
#| msgid ""
#| "Logical volume or volume group names may only contain alphanumeric "
#| "characters, hyphen, plus, period and underscore. They must be 128 "
#| "characters or less and may not begin with a hyphen. The names \".\" and "
#| "\"..\" are not allowed. In addition, logical volume names may not begin "
#| "with \"snapshot\"."
msgid ""
"Logical volume or volume group names may only contain alphanumeric "
"characters, hyphen, plus, period, and underscore. They must be 128 "
"characters or less and may not begin with a hyphen. The names \".\" and \".."
"\" are not allowed. In addition, logical volume names cannot begin with "
"\"snapshot\"."
msgstr ""
"Nomes de volumes lógicos ou de grupos de volumes podem conter somente "
"caracteres alfanuméricos, hifens, sinais de adição, pontos e sinais de caixa-"
"baixa (underscore). Os mesmos deve ter no máximo 128 caracteres e não podem "
"iniciar com um hífen. Os nomes \".\" e \"..\" não são permitidos. "
"Adicionalmente, nomes de volumes lógicos não podem iniciar com a palavra "
"\"snapshot\"."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:62001
msgid ""
"The selected device already contains the following LVM logical volumes, "
"volume groups and physical volumes which are about to be removed:"
msgstr ""
"O dispositivo selecionado já possui os seguintes volumes físicos, grupos de "
"volume e volumes lógicos LVM que estão prestes a serem removidos:"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:62001
msgid "Logical volume(s) to be removed: ${LVTARGETS}"
msgstr "Volume(s) lógico(s) a serem removidos: ${LVTARGETS}"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:62001
msgid "Volume group(s) to be removed: ${VGTARGETS}"
msgstr "Grupo(s) de Volume a ser(em) removido(s): ${VGTARGETS}"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-lvm.templates:62001
msgid "Physical volume(s) to be removed: ${PVTARGETS}"
msgstr "Volume(s) físico(s) a ser(em) removido(s): ${PVTARGETS}"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:63001
msgid "Unable to automatically remove LVM data"
msgstr "Incapaz de remover dados LVM automaticamente"

#. Type: error
#. Description
#. :sl3:
#: ../partman-lvm.templates:63001
msgid ""
"Because the volume group(s) on the selected device also consist of physical "
"volumes on other devices, it is not considered safe to remove its LVM data "
"automatically. If you wish to use this device for partitioning, please "
"remove its LVM data first."
msgstr ""
"Como o(s) grupo(s) de volume no dispositivo selecionado também consiste(m) "
"de volumes em outros dispositivos, não é considerado seguro remover seus "
"dados LVM automaticamente. Se você deseja usar este dispositivo para "
"particionamento, por favor, remove seus dados LVM primeiro."

#. Type: note
#. Description
#. :sl3:
#: ../partman-lvm.templates:64001
msgid "Logical Volume Management"
msgstr "Gerenciamento de Volumes Lógicos"

#. Type: note
#. Description
#. :sl3:
#: ../partman-lvm.templates:64001
msgid ""
"A common situation for system administrators is to find that some disk "
"partition (usually the most important one) is short on space, while some "
"other partition is underused. The Logical Volume Manager (LVM) can help with "
"this."
msgstr ""
"Uma situação comum para administradores de sistemas é descobrir que alguma "
"partição (geralmente a mais importante) está com pouco espaço, enquanto "
"outras partições estão subutilizadas. O Gerenciador de Volumes Lógicos (LVM "
"-- Logical Volume Manager) pode ajudá-lo com esse problema."

#. Type: note
#. Description
#. :sl3:
#: ../partman-lvm.templates:64001
msgid ""
"LVM allows combining disk or partition devices (\"physical volumes\") to "
"form a virtual disk (\"volume group\"), which can then be divided into "
"virtual partitions (\"logical volumes\"). Volume groups and logical volumes "
"may span several physical disks. New physical volumes may be added to a "
"volume group at any time, and logical volumes can be resized up to the "
"amount of unallocated space in the volume group."
msgstr ""
"LVM permite combinar discos ou partições (\"volumes físico\") para formar um "
"disco virtual (\"grupo de volumes\"), que pode ser dividido em partições "
"virtual (\"volumes lógicos\"). Grupos de volumes e volumes lógicos podem "
"estar distribuídos em vários discos físicos. Novos volumes físicos podem ser "
"adicionados ao grupo de volumes a qualquer momento e volumes lógicos podem "
"ser redimensionados para a quantidade de espaço não alocado no grupo de "
"volumes."

#. Type: note
#. Description
#. :sl3:
#: ../partman-lvm.templates:64001
msgid ""
"The items on the LVM configuration menu can be used to edit volume groups "
"and logical volumes. After you return to the main partition manager screen, "
"logical volumes will be displayed in the same way as ordinary partitions, "
"and should be treated as such."
msgstr ""
"Os itens no menu de configuração LVM pode ser usados para editar grupos de "
"volumes e volumes lógicos. Após retornar da tela do gerenciador de "
"partições, os volumes lógicos serão exibidos da mesma forma que partições "
"tradicionais e você deverá tratá-las como tal."

#. Type: string
#. Description
#. :sl3:
#. Type: string
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:2001 ../partman-auto-lvm.templates:3001
msgid "Name of the volume group for the new system:"
msgstr "Nome do grupo de volume para o novo sistema:"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:4001
msgid ""
"This happened because the selected recipe does not contain any partition "
"that can be created on LVM volumes."
msgstr ""
"Isto ocorreu devido ao modelo selecionado não conter nenhuma partição que "
"possa ser criada em volumes LVM."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:5001
msgid "Continue installation without /boot partition?"
msgstr "Continuar a instalação sem uma partição /boot?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:5001
msgid ""
"The recipe you selected does not contain a separate partition for /boot. "
"This is normally needed to allow you to boot the system when using LVM."
msgstr ""
"O modelo que você selecionou não contém uma partição separada para o /boot. "
"Normalmente isso é necessário para permitir que seu sistema inicie quando "
"você está usando LVM."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:5001
msgid ""
"You can choose to ignore this warning, but that may result in a failure to "
"reboot the system after the installation is completed."
msgstr ""
"Você pode optar por ignorar este aviso, mas isso pode resultar em falhas ao "
"reinicializar o sistema após a instalação ter sido completada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:6001
msgid ""
"The volume group name used to automatically partition using LVM is already "
"in use. Lowering the priority for configuration questions will allow you to "
"specify an alternative name."
msgstr ""
"O nome do grupo de volume usado para particionar automaticamente usando LVM "
"já está em uso. Diminuir a prioridade das perguntas de configuração "
"permitirá que você especifique um nome alternativo."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:7001
msgid "Unexpected error while creating volume group"
msgstr "Erro inesperado na criação de grupo de volume"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:7001
msgid ""
"Autopartitioning using LVM failed because an error occurred while creating "
"the volume group."
msgstr ""
"O autoparticionamento usando LVM falhou devido a um erro ter ocorrido "
"durante a criação do grupo de volume."

#. Type: text
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:8001
#, no-c-format
msgid "Multiple disks (%s)"
msgstr "Múltiplos discos (%s)"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:9001
msgid "Non-existing physical volume"
msgstr "Volume físico não existente:"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:9001
msgid ""
"A volume group definition contains a reference to a non-existing physical "
"volume."
msgstr ""
"Uma definição de grupo de volume contém uma referência para um volume físico "
"não existente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:9001
msgid ""
"Please check that all devices are properly connected. Alternatively, please "
"check the automatic partitioning recipe."
msgstr ""
"Por favor, verifique se todos os dispositivos estão apropriadamente "
"conectados. Alternativamente, por favor, verifique a receita de "
"particionamento automático."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:10001
msgid "No physical volume defined in volume group"
msgstr "Nenhum volume físico definido no grupo de volume"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:10001
msgid ""
"The automatic partitioning recipe contains the definition of a volume group "
"that does not contain any physical volume."
msgstr ""
"A receita de particionamento automático contém a definição de um grupo de "
"volume que não contém nenhum volume físico."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-lvm.templates:10001
msgid "Please check the automatic partitioning recipe."
msgstr "Por favor, verifique a receita de particionamento automático."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-raid.templates:1001
msgid "Error while setting up RAID"
msgstr "Erro durante a configuração RAID"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-raid.templates:1001
msgid ""
"An unexpected error occurred while setting up a preseeded RAID configuration."
msgstr ""
"Um erro inesperado ocorreu durante a configuração de uma configuração RAID "
"pré-alimentada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-raid.templates:4001
msgid "Not enough RAID partitions specified"
msgstr "Partições RAID especificadas não são o bastante"

#. Type: error
#. Description
#. :sl3:
#: ../partman-auto-raid.templates:4001
msgid ""
"There are not enough RAID partitions specified for your preseeded "
"configuration. You need at least 3 devices for a RAID5 array."
msgstr ""
"Não existem partições RAID o bastante especificadas para sua configuração "
"pré-alimentada. Você precisa de pelo menos 3 dispositivos para um "
"agrupamento RAID5."

#. Type: text
#. Description
#. File system name
#. Keep translations short enough
#. :sl3:
#: ../partman-crypto.templates:1001
msgid "physical volume for encryption"
msgstr "volume físico a ser criptografado"

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#. Should be kept very short or unstranslated
#. :sl3:
#: ../partman-crypto.templates:2001
msgid "crypto"
msgstr "crypto"

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#. Translations should be kept below 40 columns
#. :sl3:
#: ../partman-crypto.templates:3001
msgid "Loopback (loop-AES)"
msgstr "Loopback (loop-AES)"

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#. Translations should be kept below 40 columns
#. :sl3:
#: ../partman-crypto.templates:4001
msgid "Device-mapper (dm-crypt)"
msgstr "Device-mapper (dm-crypt)"

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#. :sl3:
#: ../partman-crypto.templates:6001
msgid "not active"
msgstr "não ativo"

#. Type: text
#. Description
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:7001
msgid "Encryption method:"
msgstr "Método de criptografia:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:8001
msgid "Encryption method for this partition:"
msgstr "Método de criptografia para esta partição:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:8001
msgid ""
"Changing the encryption method will set other encryption-related fields to "
"their default values for the new encryption method."
msgstr ""
"Mudar o método de criptografia ajustará outros campos relacionados à "
"criptografia para os valores padrão do novo método de criptografia."

#. Type: text
#. Description
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:9001
msgid "Encryption:"
msgstr "Criptografia:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:10001
msgid "Encryption for this partition:"
msgstr "Criptografia para esta partição:"

#. Type: text
#. Description
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:11001
msgid "Key size:"
msgstr "Tamanho da chave:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:12001
msgid "Key size for this partition:"
msgstr "Tamanho da chave para esta partição:"

#. Type: text
#. Description
#. An initialization vector is the initial value used to seed
#. the encryption algorithm
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:13001
msgid "IV algorithm:"
msgstr "Algoritmo IV:"

#. Type: select
#. Description
#. An initialization vector is the initial randomness used to seed
#. the encryption algorithm
#. :sl3:
#: ../partman-crypto.templates:14001
msgid "Initialization vector generation algorithm for this partition:"
msgstr "Algoritmo de geração de inicialização de vetores para esta partição:"

#. Type: select
#. Description
#. An initialization vector is the initial randomness used to seed
#. the encryption algorithm
#. :sl3:
#: ../partman-crypto.templates:14001
msgid ""
"Different algorithms exist to derive the initialization vector for each "
"sector. This choice influences the encryption security. Normally, there is "
"no reason to change this from the recommended default, except for "
"compatibility with older systems."
msgstr ""
"Existem diferentes algoritmos a partir do quais vetores de inicialização "
"podem ser derivados para cada setor. Esta escolha influencia na segurança da "
"criptografia. Normalmente, não existem razões para mudar para um algoritmo "
"diferente do algoritmo padrão recomendado, exceto por compatibilidade com "
"sistemas mais antigos."

#. Type: text
#. Description
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:15001
msgid "Encryption key:"
msgstr "Chave criptográfica:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:16001
msgid "Type of encryption key for this partition:"
msgstr "Tipo de chave criptográfica para esta partição:"

#. Type: text
#. Description
#. Should be kept below 24 columns
#. :sl3:
#: ../partman-crypto.templates:17001
msgid "Encryption key hash:"
msgstr "Hash de chave criptográfica:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:18001
msgid "Type of encryption key hash for this partition:"
msgstr "Tipo de hash de chave criptográfica para esta partição:"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:18001
msgid ""
"The encryption key is derived from the passphrase by applying a one-way hash "
"function to it. Normally, there is no reason to change this from the "
"recommended default and doing so in the wrong way can reduce the encryption "
"strength."
msgstr ""
"A chave criptográfica é derivada da passphrase através da aplicação de uma "
"função hash de mão única à mesma. Normalmente, não existem razões para mudar "
"a chave criptográfica para outra chave diferente da chave padrão recomendada "
"e, na verdade, fazer essa mudança de maneira errada pode reduzir a força da "
"criptografia."

#. Type: text
#. Description
#. This shows up in a screen summarizing options and will be followed
#. by "yes" or "no"
#. :sl3:
#: ../partman-crypto.templates:19001
msgid "Erase data:"
msgstr "Apagar dados:"

#. Type: text
#. Description
#. :sl3:
#: ../partman-crypto.templates:22001
msgid "Erase data on this partition"
msgstr "Apagar dados nesta partição"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:23001
msgid "Really erase the data on ${DEVICE}?"
msgstr "Realmente apagar os dados em ${DEVICE}?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:23001
msgid ""
"The data on ${DEVICE} will be overwritten with random data. It can no longer "
"be recovered after this step has completed. This is the last opportunity to "
"abort the erase."
msgstr ""
"Os dados em ${DEVICE} serão sobrescritos com dados aleatórios. Os mesmos não "
"poderão ser recuperados após este passo ter sido finalizado. Esta é a última "
"oportunidade de abortar o processo que apagará os dados."

#. Type: text
#. Description
#. :sl3:
#: ../partman-crypto.templates:24001
msgid "Erasing data on ${DEVICE}"
msgstr "Apagando dados em ${DEVICE}"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:25001
msgid "Erasing data on ${DEVICE} failed"
msgstr "Falha na remoção de dados em ${DEVICE}"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:25001
msgid ""
"An error occurred trying to erase the data on ${DEVICE}. The data has not "
"been erased."
msgstr ""
"Um erro ocorreu durante a tentativa de apagar dos dados em ${DEVICE}. Os "
"dados não foram apagados."

#. Type: text
#. Description
#. :sl3:
#: ../partman-crypto.templates:26001
msgid "Setting up encryption..."
msgstr "Configurando criptografia..."

#. Type: text
#. Description
#. :sl3:
#: ../partman-crypto.templates:27001
msgid "Configure encrypted volumes"
msgstr "Configurar volumes criptografados"

#. Type: note
#. Description
#. :sl3:
#: ../partman-crypto.templates:28001
msgid "No partitions to encrypt"
msgstr "Nenhuma partição a ser criptografada"

#. Type: note
#. Description
#. :sl3:
#: ../partman-crypto.templates:28001
msgid "No partitions have been selected for encryption."
msgstr "Nenhuma partição foi selecionada para criptografia."

#. Type: note
#. Description
#. :sl3:
#: ../partman-crypto.templates:29001
msgid "Required programs missing"
msgstr "Programas necessários faltando"

#. Type: note
#. Description
#. :sl3:
#: ../partman-crypto.templates:29001
msgid ""
"This build of debian-installer does not include one or more programs that "
"are required for partman-crypto to function correctly."
msgstr ""
"Esta construção do debian-installer não inclui um ou mais programas "
"necessários para que o partman-crypto funcione corretamente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:30001
msgid "Required encryption options missing"
msgstr "Opções de criptografia necessárias faltando"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:30001
msgid ""
"The encryption options for ${DEVICE} are incomplete. Please return to the "
"partition menu and select all required options."
msgstr ""
"As opções de criptografia para ${DEVICE} estão incompletas. Por favor, "
"retorne ao menu de particionamento e selecione todas as opções necessárias."

#. Type: text
#. Description
#. :sl3:
#. Translators: this string is used to assemble a string of the format
#. "$specify_option: $missing". If this proves to be a problem in your
#. language, please contact the maintainer and we can do it differently.
#: ../partman-crypto.templates:31001
msgid "missing"
msgstr "faltando"

#. Type: text
#. Description
#. :sl3:
#. What is "in use" is a partition
#: ../partman-crypto.templates:32001
msgid "In use as physical volume for encrypted volume ${DEV}"
msgstr "Em uso como volume físico para volume criptografado ${DEV}"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:33001
msgid "Encryption package installation failure"
msgstr "Falha na instalação de pacote de criptografia"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:33001
msgid ""
"The kernel module package ${PACKAGE} could not be found or an error occurred "
"during its installation."
msgstr ""
"O pacote de módulo de kernel ${PACKAGE} não pôde ser encontrado ou um erro "
"ocorreu durante a instalação do mesmo."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:33001
msgid ""
"It is likely that there will be problems setting up encrypted partitions "
"when the system is rebooted. You may be able to correct this by installing "
"the required package(s) later on."
msgstr ""
"É provável que surjam problemas na configuração de partições criptografadas "
"quando o sistema for reinicializado. Você poderá ser capaz corrigí-los "
"instalando os pacotes necessários posteriormente."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:34001
msgid "Write the changes to disk and configure encrypted volumes?"
msgstr "Gravar as mudanças no disco e configurar volumes criptografados?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:34001
msgid ""
"Before encrypted volumes can be configured, the current partitioning scheme "
"has to be written to disk.  These changes cannot be undone."
msgstr ""
"Antes que os volumes criptografados possam ser configurados, o esquema de "
"particionamento atual precisa ser gravado em disco. Essas mudanças não "
"poderão ser desfeitas."

#. Type: boolean
#. Description
#. :sl3:
#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:34001 ../partman-crypto.templates:35001
msgid ""
"After the encrypted volumes have been configured, no additional changes to "
"the partitions on the disks containing encrypted volumes are allowed. Please "
"decide if you are satisfied with the current partitioning scheme for these "
"disks before continuing."
msgstr ""
"Depois que os volumes criptografados forem configurados, nenhuma mudança "
"adicional nas partições dos disco que contém os volumes criptografados será "
"permitida. Por favor, decida se você está satisfeito com o esquema de "
"particionamento atual nesses discos antes de continuar."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:35001
msgid "Keep current partition layout and configure encrypted volumes?"
msgstr ""
"Manter o layout de particionamento atual e configurar volumes criptografados?"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:36001
msgid "Configuration of encrypted volumes failed"
msgstr "Falha na configuração de volumes criptografados"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:36001
msgid "An error occurred while configuring encrypted volumes."
msgstr ""
"Um erro ocorreu durante a gravação das mudanças nos volumes criptografados."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:36001
msgid "The configuration has been aborted."
msgstr "A configuração foi abortada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:37001
msgid "Initialisation of encrypted volume failed"
msgstr "Falha na inicialização de volume criptografado"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:37001
msgid "An error occurred while setting up encrypted volumes."
msgstr ""
"Um erro ocorreu durante a gravação das mudanças nos volumes criptografados."

#. Type: text
#. Description
#. :sl3:
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:38001
msgid "Passphrase"
msgstr "Passphrase"

#. Type: text
#. Description
#. :sl3:
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:39001
msgid "Keyfile (GnuPG)"
msgstr "Arquivo de chave (GnuPG)"

#. Type: text
#. Description
#. :sl3:
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:40001
msgid "Random key"
msgstr "Chave aleatória"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:41001
msgid "Unsafe swap space detected"
msgstr "Área de troca insegura detectada"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:41001
msgid "An unsafe swap space has been detected."
msgstr "Uma área de troca insegura foi detectada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:41001
msgid ""
"This is a fatal error since sensitive data could be written out to disk "
"unencrypted. This would allow someone with access to the disk to recover "
"parts of the encryption key or passphrase."
msgstr ""
"Esse é um erro fatal, uma vez que dados sensíveis podem ser gravados no "
"disco não criptografado. Isso poderia permitir a alguém com acesso ao disco "
"recuperar partes da chave criptográfica ou da passphrase."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:41001
msgid ""
"Please disable the swap space (e.g. by running swapoff) or configure an "
"encrypted swap space and then run setup of encrypted volumes again. This "
"program will now abort."
msgstr ""
"Por favor, desabilite a área de troca (por exemplo, executando swapoff) ou "
"configure uma área de troca (swap) criptografada e então execute a "
"configuração dos volumes criptografados novamente. Este programa irá agora "
"abortar."

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:42001
msgid "Encryption passphrase:"
msgstr "Passphrase criptográfico:"

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:42001
msgid "You need to choose a passphrase to encrypt ${DEVICE}."
msgstr "Você precisa escolher uma passphrase para criptografar ${DEVICE}."

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:42001
msgid ""
"The overall strength of the encryption depends strongly on this passphrase, "
"so you should take care to choose a passphrase that is not easy to guess. It "
"should not be a word or sentence found in dictionaries, or a phrase that "
"could be easily associated with you."
msgstr ""
"A força geral da criptografia depende fortemente dessa passphrase, portanto "
"você deve se certificar de escolher uma passphrase que não seja fácil de ser "
"adivinhada. A mesma não deverá ser uma palavra ou uma sentença encontrada em "
"dicionários ou mesmo uma frase que possa ser facilmente associada a você."

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:42001
msgid ""
"A good passphrase will contain a mixture of letters, numbers and "
"punctuation. Passphrases are recommended to have a length of 20 or more "
"characters."
msgstr ""
"Uma boa passphrase contém uma mistura de letras, números e pontuação. É "
"recomendado que passphrases tenham um tamanho igual ou superior a 20 "
"caracteres."

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:43001
msgid "Re-enter passphrase to verify:"
msgstr "Informa a passphrase novamente para verificação:"

#. Type: password
#. Description
#. :sl3:
#: ../partman-crypto.templates:43001
msgid ""
"Please enter the same passphrase again to verify that you have typed it "
"correctly."
msgstr ""
"Por favor, informe a passphrase novamente para verificar se você a digitou "
"corretamente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:44001
msgid "Passphrase input error"
msgstr "Erro na informação da passphrase"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:44001
msgid "The two passphrases you entered were not the same. Please try again."
msgstr ""
"As duas passphrases que você informou não são iguais. Por favor, tente "
"novamente."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:45001
msgid "Empty passphrase"
msgstr "Passphrase vazia"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:45001
msgid ""
"You entered an empty passphrase, which is not allowed. Please choose a non-"
"empty passphrase."
msgstr ""
"Você informou uma passphrase vazia, o que não é permitido. Por favor, "
"escolha uma passphrase não vazia."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:46001
msgid "Use weak passphrase?"
msgstr "Utilizar passphrase fraca?"

#. Type: boolean
#. Description
#. :sl3:
#. Translators: we unfortunately cannot use plural forms here
#. So, you are suggested to use the plural form adapted for
#. MINIMUM=8, which is the current hardcoded value
#: ../partman-crypto.templates:46001
msgid ""
"You entered a passphrase that consists of less than ${MINIMUM} characters, "
"which is considered too weak. You should choose a stronger passphrase."
msgstr ""
"Você informou uma passphrase que consiste de menos do que ${MINIMUM} "
"caracteres, o que é considerado muito fraco. Você deveria escolher uma "
"passphrase mais forte."

#. Type: entropy
#. Description
#. :sl3:
#: ../partman-crypto.templates:47001
msgid "The encryption key for ${DEVICE} is now being created."
msgstr "A chave criptográfica para ${DEVICE} está sendo criada agora."

#. Type: text
#. Description
#. :sl3:
#: ../partman-crypto.templates:48001 ../cdebconf-newt-entropy.templates:3001
#: ../cdebconf-gtk-entropy.templates:3001
#: ../cdebconf-text-entropy.templates:3001
msgid "Key data has been created successfully."
msgstr "Chave de dados foi criada com sucesso."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:49001
msgid "Keyfile creation failure"
msgstr "Falha na criação do arquivo de chave"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:49001
msgid "An error occurred while creating the keyfile."
msgstr "Um erro ocorreu durante a criação do arquivo de chave."

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:50001 ../partman-crypto.templates:51001
msgid "Encryption configuration failure"
msgstr "Falha na configuração da criptografia"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:50001
msgid ""
"You have selected the root file system to be stored on an encrypted "
"partition. This feature requires a separate /boot partition on which the "
"kernel and initrd can be stored."
msgstr ""
"Você selecionou o sistema de arquivos raiz para ser armazenado em uma "
"partição criptografada. Esse recurso requer uma partição /boot separada, na "
"qual o kernel e o initrd possam ser armazenados."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:50001
msgid "You should go back and setup a /boot partition."
msgstr "Você deveria voltar e configurar uma partição /boot."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:51001
msgid ""
"You have selected the /boot file system to be stored on an encrypted "
"partition. This is not possible because the boot loader would be unable to "
"load the kernel and initrd. Continuing now would result in an installation "
"that cannot be used."
msgstr ""
"Você selecionou o sistema de arquivos /boot para ser armazenado em uma "
"partição criptografada. Isso não é possível devido ao carregador de "
"inicialização não conseguir carregar o kernel e o initrd a partir de uma "
"partição criptografada. Continuar agora resultaria em uma instalação que não "
"poderia ser utilizada."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:51001
msgid ""
"You should go back and choose a non-encrypted partition for the /boot file "
"system."
msgstr ""
"Você deveria voltar e selecionar uma partição não criptografada para o "
"sistema de arquivos /boot."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:52001
msgid "Are you sure you want to use a random key?"
msgstr "Você têm certeza que deseja utilizar uma chave aleatória?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:52001
msgid ""
"You have chosen a random key type for ${DEVICE} but requested the "
"partitioner to create a file system on it."
msgstr ""
"Você selecionou um tipo de chave aleatória para ${DEVICE} mas requisitou ao "
"particionador criar um sistema de arquivos neste dispositivo."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:52001
msgid ""
"Using a random key type means that the partition data is going to be "
"destroyed upon each reboot. This should only be used for swap partitions."
msgstr ""
"Utilizar um tipo de chave aleatória significa que os dados da partição serão "
"destruídos a cada reinicialização. Esse tipo de chave deveria ser utilizado "
"para para partições de troca (swap)."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:53001
msgid "Failed to download crypto components"
msgstr "Falha ao carregar componentes de criptografia"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:53001
msgid "An error occurred trying to download additional crypto components."
msgstr ""
"Um erro ocorreu durante a tentativa de fazer o download dos componentes de "
"criptografia."

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:54001
msgid "Proceed to install crypto components despite insufficient memory?"
msgstr ""
"Continuar a instalar os componentes de criptografia mesmo com memória "
"insuficiente?"

#. Type: boolean
#. Description
#. :sl3:
#: ../partman-crypto.templates:54001
msgid ""
"There does not seem to be sufficient memory available to install additional "
"crypto components. If you choose to go ahead and continue anyway, the "
"installation process could fail."
msgstr ""
"Parece não existir memória suficiente disponível para instalar componentes "
"de criptografia adicionais. Caso você opte por ir em frente e continuar "
"mesmo assim, o processo de instalação poderá falhar."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl3:
#: ../partman-crypto.templates:55001
msgid "Create encrypted volumes"
msgstr "Criar volumes criptografados"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:55002
msgid "Encryption configuration actions"
msgstr "Ações de configuração da criptografia"

#. Type: select
#. Description
#. :sl3:
#: ../partman-crypto.templates:55002
msgid "This menu allows you to configure encrypted volumes."
msgstr "Este menu permite que você configure volumes criptografados."

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-crypto.templates:56001
msgid "Devices to encrypt:"
msgstr "Dispositivos a serem criptografados:"

#. Type: multiselect
#. Description
#. :sl3:
#: ../partman-crypto.templates:56001
msgid "Please select the devices to be encrypted."
msgstr "Por favor, selecione os dispositivos que serão criptografados."

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:57001
msgid "No devices selected"
msgstr "Nenhum dispositivo selecionado"

#. Type: error
#. Description
#. :sl3:
#: ../partman-crypto.templates:57001
msgid "No devices were selected for encryption."
msgstr "Nenhum dispositivo foi selecionado para criptografia."

#. Type: text
#. Description
#. :sl3:
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto-crypto.templates:1001
msgid "Guided - use entire disk and set up encrypted LVM"
msgstr "Assistido - usar disco todo e LVM criptografado"

#. Type: text
#. Description
#. :sl3:
#: ../cdebconf-newt-entropy.templates:1001
#: ../cdebconf-text-entropy.templates:1001
msgid "Enter random characters"
msgstr "Informe caracteres aleatórios"

#. Type: text
#. Description
#. :sl3:
#: ../cdebconf-newt-entropy.templates:2001
#: ../cdebconf-text-entropy.templates:2001
msgid ""
"You can help speed up the process by entering random characters on the "
"keyboard, or just wait until enough key data has been collected (which can "
"take a long time)."
msgstr ""
"Você pode ajudar a acelerar o processo digitando caracteres aleatórios no "
"teclado, ou simplesmente esperar até que dados-chave em quantidade "
"suficiente tenham sido coletados (o que pode demorar bastante)."

#. Type: text
#. Description
#. :sl3:
#: ../cdebconf-gtk-entropy.templates:1001
msgid "Enter random characters or make random movements with the mouse"
msgstr "Digite caracteres aleatórios ou faça movimentos aleatórios com o mouse"

#. Type: text
#. Description
#. :sl3:
#: ../cdebconf-gtk-entropy.templates:2001
msgid ""
"You can help speed up the process by entering random characters on the "
"keyboard or by making random movements with the mouse."
msgstr ""
"Você pode ajudar a acelerar o processo digitando caracteres aleatórios no "
"teclado ou fazendo movimentos aleatórios com o mouse."

Reply to: