[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[LCFC] po://debhelper/man/po4a/po/fr.po



On Tue, Feb 02, 2010 at 11:01:46AM +0100, Stéphane Blondon wrote:
> Le 1 février 2010 21:09, Simon Paillard
> <simon.paillard@resel.enst-bretagne.fr> a écrit :
> > Un peu mieux:
> >  1 traduction approximative, 6 messages non traduits
> 
> Diff du diff en pièce jointe.

Merci Stéphane pour ton attention.
> @@ -440,7 +440,7 @@
[..]
>   "exemple, s'il y a un Makefile et qu'il contient un bloc « install » il "
> - "exécutera make (ou MAKE si les variables d'environnement sont définies). "
> + "exécutera make (ou MAKE si cette variable d'environnement est définie). "

J'ai appliqué cette corretion ailleurs dans le fichier.

Ci-joint le fichier diff par rapport au git, avant envoi à Valéry/JoeyH.

-- 
Simon Paillard
>From f333d9a7f693e0d438ad0dc08a91b009838385aa Mon Sep 17 00:00:00 2001
From: Simon Paillard <simon.paillard@resel.enst-bretagne.fr>
Date: Sun, 7 Feb 2010 17:24:00 +0100
Subject: [PATCH] =?utf-8?q?Update=20french=20po,=20fix=20typos=20[=20Cyril=20Brulebois,=20St=C3=A9phane=20Blondon,=20Simon=20Paillard=20]?=
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit

---
 man/po4a/po/fr.po |  504 ++++++++++++++++++++++++-----------------------------
 1 files changed, 230 insertions(+), 274 deletions(-)

diff --git a/man/po4a/po/fr.po b/man/po4a/po/fr.po
index c56604f..a8d4d25 100644
--- a/man/po4a/po/fr.po
+++ b/man/po4a/po/fr.po
@@ -3,8 +3,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2009-12-31 11:34-0500\n"
-"PO-Revision-Date: 2006-11-19 20:50+0100\n"
+"POT-Creation-Date: 2010-02-02 12:12-0500\n"
+"PO-Revision-Date: 2010-02-07 17:15+0100\n"
 "Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
 "Language-Team: French <debian-l10n-french@lists.debian.org>\n"
 "MIME-Version: 1.0\n"
@@ -149,16 +149,12 @@ msgstr "COMMANDES DE DEBHELPER"
 # type: textblock
 #. type: textblock
 #: debhelper.pod:31
-#, fuzzy
-#| msgid ""
-#| "Here is the complete list of available debhelper commands. See their man "
-#| "pages for additional documentation."
 msgid ""
 "Here is the list of debhelper commands you can use. See their man pages for "
 "additional documentation."
 msgstr ""
-"Voici la liste complète de commandes debhelper disponibles. Consulter leurs "
-"pages de manuel respectives pour obtenir des informations complémentaires."
+"Voici la liste des commandes debhelper disponibles. Consulter leurs pages de "
+"manuel respectives pour obtenir des informations complémentaires."
 
 # type: textblock
 #. type: textblock
@@ -169,12 +165,14 @@ msgstr "#LIST#"
 #. type: =head2
 #: debhelper.pod:40
 msgid "Deprecated Commands"
-msgstr ""
+msgstr "Commandes obsolètes"
 
 #. type: textblock
 #: debhelper.pod:42
 msgid "A few debhelper commands are deprecated and should not be used."
 msgstr ""
+"Quelques commandes debhelper sont obsolètes et ne devraient plus être "
+"utilisées."
 
 #. type: textblock
 #: debhelper.pod:46
@@ -184,26 +182,19 @@ msgstr ""
 # type: =head2
 #. type: =head2
 #: debhelper.pod:50
-#, fuzzy
-#| msgid "Other notes"
 msgid "Other Commands"
-msgstr "Autres remarques"
+msgstr "Autres commandes"
 
 # type: textblock
 #. type: textblock
 #: debhelper.pod:52
-#, fuzzy
-#| msgid ""
-#| "If a program's name starts with \"dh_\", and the program is not on the "
-#| "above list, then it is not part of the debhelper package, but it should "
-#| "still work like the other programs described on this page."
 msgid ""
 "If a program's name starts with \"dh_\", and the program is not on the above "
 "lists, then it is not part of the debhelper package, but it should still "
 "work like the other programs described on this page."
 msgstr ""
-"Si le nom d'un programme commence par « dh_ » et qu'il n'est pas dans la "
-"liste ci-dessus, alors, c'est qu'il ne fait pas partie de la suite "
+"Si le nom d'un programme commence par « dh_ » et qu'il n'est pas dans les "
+"listes ci-dessus, cela signifie qu'il ne fait pas partie de la suite "
 "debhelper. Cependant, il devrait tout de même fonctionner comme les autres "
 "programmes décrits dans cette page."
 
@@ -517,15 +508,29 @@ msgstr ""
 "le paquet principal est le premier paquet énuméré dans le fichier debian/"
 "control."
 
+#. type: =item
+#: debhelper.pod:159
+msgid "B<-O=>I<option|bundle>"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:161
+msgid ""
+"This is used by L<dh(1)> when passing user-specified options to all the "
+"commands it runs. If the command supports the specified option or option "
+"bundle, it will take effect. If the command does not support the option (or "
+"any part of an option bundle), it will be ignored."
+msgstr ""
+
 # type: =head1
 #. type: =head1
-#: debhelper.pod:161
+#: debhelper.pod:168
 msgid "COMMON DEBHELPER OPTIONS"
 msgstr "OPTIONS COURANTES DE DEBHELPER"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:163
+#: debhelper.pod:170
 msgid ""
 "The following command line options are supported by some debhelper "
 "programs.  See the man page of each program for a complete explanation of "
@@ -537,13 +542,13 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:169
+#: debhelper.pod:176
 msgid "B<-n>"
 msgstr "B<-n>"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:171
+#: debhelper.pod:178
 msgid "Do not modify postinst/postrm/etc scripts."
 msgstr ""
 "Ne pas modifier les scripts de maintenance du paquet (postinst, postrm, "
@@ -551,14 +556,14 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:173 dh_compress:50 dh_makeshlibs:76 dh_md5sums:37
+#: debhelper.pod:180 dh_compress:50 dh_makeshlibs:76 dh_md5sums:37
 #: dh_shlibdeps:30 dh_strip:39
 msgid "B<-X>I<item>, B<--exclude=>I<item>"
 msgstr "B<-X>I<élément>, B<--exclude=>I<élément>"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:175
+#: debhelper.pod:182
 msgid ""
 "Exclude an item from processing. This option may be used multiple times, to "
 "exclude more than one thing."
@@ -568,7 +573,7 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:178 dh_bugfiles:54 dh_compress:58 dh_installdirs:35
+#: debhelper.pod:185 dh_bugfiles:54 dh_compress:58 dh_installdirs:35
 #: dh_installdocs:64 dh_installexamples:36 dh_installinfo:35 dh_installman:64
 #: dh_link:55
 msgid "B<-A>, B<--all>"
@@ -576,7 +581,7 @@ msgstr "B<-A>, B<--all>"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:180
+#: debhelper.pod:187
 msgid ""
 "Makes files or other items that are specified on the command line take "
 "effect in ALL packages acted on, not just the first."
@@ -585,12 +590,12 @@ msgstr ""
 "commande concernent TOUS les paquets construits et pas seulement le premier."
 
 #. type: =head1
-#: debhelper.pod:185
+#: debhelper.pod:192
 msgid "BUILD SYSTEM OPTIONS"
 msgstr "OPTIONS DU PROCESSUS DE CONSTRUCTION"
 
 #. type: textblock
-#: debhelper.pod:187
+#: debhelper.pod:194
 msgid ""
 "The following command line options are supported by all of the dh_auto_* "
 "debhelper programs. These programs support a variety of build systems, and "
@@ -604,14 +609,14 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:194
+#: debhelper.pod:201
 msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
 msgstr ""
 "B<-S>I<processus de construction>, B<--buildsystem=>I<processus de "
 "construction>"
 
 #. type: textblock
-#: debhelper.pod:196
+#: debhelper.pod:203
 msgid ""
 "Force use of the specified I<buildsystem>, instead of trying to auto-select "
 "one which might be applicable for the package."
@@ -621,12 +626,12 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:199
+#: debhelper.pod:206
 msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
 msgstr "B<-D>I<répertoire>, B<--sourcedirectory=>I<répertoire>"
 
 #. type: textblock
-#: debhelper.pod:201
+#: debhelper.pod:208
 msgid ""
 "Assume that the original package source tree is at the specified "
 "I<directory> rather than the top level directory of the Debian source "
@@ -637,12 +642,12 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:205
+#: debhelper.pod:212
 msgid "B<-B>[I<directory>], B<--builddirectory>=[I<directory>]"
 msgstr "B<-B>[I<répertoire>], B<--builddirectory>=[I<répertoire>]"
 
 #. type: textblock
-#: debhelper.pod:207
+#: debhelper.pod:214
 msgid ""
 "Enable out of source building and use the specified I<directory> as the "
 "build directory. If I<directory> parameter is omitted, a default build "
@@ -654,7 +659,7 @@ msgstr ""
 "sera choisi."
 
 #. type: textblock
-#: debhelper.pod:211
+#: debhelper.pod:218
 msgid ""
 "If this option is not specified, building will be done in source by default "
 "unless the build system requires or prefers out of source tree building.  In "
@@ -667,7 +672,7 @@ msgstr ""
 "utilisé même si L<--builddirectory> n'est pas spécifié."
 
 #. type: textblock
-#: debhelper.pod:216
+#: debhelper.pod:223
 msgid ""
 "If the build system prefers out of source tree building but still allows in "
 "source building, the latter can be re-enabled by passing a build directory "
@@ -681,14 +686,12 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:220
-#, fuzzy
-#| msgid "B<--> I<params>"
+#: debhelper.pod:227
 msgid "B<--parallel>"
-msgstr "B<--> I<paramètres>"
+msgstr "B<--parallel>"
 
 #. type: textblock
-#: debhelper.pod:222
+#: debhelper.pod:229
 msgid ""
 "Enable parallel builds if underlying build system supports them.  The number "
 "of parallel jobs is controlled by the DEB_BUILD_OPTIONS environment variable "
@@ -697,19 +700,19 @@ msgid ""
 msgstr ""
 
 #. type: textblock
-#: debhelper.pod:227
+#: debhelper.pod:234
 msgid ""
 "If this option is not specified, debhelper currently defaults to not "
 "allowing parallel package builds."
 msgstr ""
 
 #. type: =item
-#: debhelper.pod:230
+#: debhelper.pod:237
 msgid "B<--max-parallel>I<=maximum>"
-msgstr ""
+msgstr "B<--max-parallel>I<=maximum>"
 
 #. type: textblock
-#: debhelper.pod:232
+#: debhelper.pod:239
 msgid ""
 "This option implies L<--parallel> and allows further limiting the number of "
 "jobs that can be used in a parallel build. If the package build is known to "
@@ -719,12 +722,12 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:237 dh:60
+#: debhelper.pod:244 dh:60
 msgid "B<--list>, B<-l>"
 msgstr "B<--list>, B<-l>"
 
 #. type: textblock
-#: debhelper.pod:239
+#: debhelper.pod:246
 msgid ""
 "List all build systems supported by debhelper on this system. The list "
 "includes both default and third party build systems (marked as such). Also "
@@ -739,7 +742,7 @@ msgstr ""
 
 # type: =head1
 #. type: =head1
-#: debhelper.pod:246 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:110
+#: debhelper.pod:253 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:110
 #: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
 #: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
 #: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
@@ -749,13 +752,13 @@ msgstr "REMARQUES"
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:248
+#: debhelper.pod:255
 msgid "Multiple binary package support"
 msgstr "Prise en charge de plusieurs paquets binaires"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:250
+#: debhelper.pod:257
 msgid ""
 "If your source package generates more than one binary package, debhelper "
 "programs will default to acting on all binary packages when run. If your "
@@ -775,7 +778,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:258
+#: debhelper.pod:265
 msgid ""
 "To facilitate this, as well as give you more control over which packages are "
 "acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
@@ -791,13 +794,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:264
+#: debhelper.pod:271
 msgid "Automatic generation of debian install scripts"
 msgstr "Génération automatique des scripts Debian de maintenance du paquet"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:266
+#: debhelper.pod:273
 msgid ""
 "Some debhelper commands will automatically generate parts of debian "
 "maintainer scripts. If you want these automatically generated things "
@@ -815,7 +818,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:273
+#: debhelper.pod:280
 msgid ""
 "If a script does not exist at all and debhelper needs to add something to "
 "it, then debhelper will create the complete script."
@@ -825,7 +828,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:276
+#: debhelper.pod:283
 msgid ""
 "All debhelper commands that automatically generate code in this way let it "
 "be disabled by the -n parameter (see above)."
@@ -836,7 +839,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:279
+#: debhelper.pod:286
 msgid ""
 "Note that the inserted code will be shell code, so you cannot directly use "
 "it in a perl script. If you would like to embed it into a perl script, here "
@@ -851,7 +854,7 @@ msgstr ""
 
 # type: verbatim
 #. type: verbatim
-#: debhelper.pod:284
+#: debhelper.pod:291
 #, no-wrap
 msgid ""
 "  my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
@@ -870,13 +873,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:290
+#: debhelper.pod:297
 msgid "Automatic generation of miscellaneous dependencies."
 msgstr "Génération automatique des diverses dépendances."
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:292
+#: debhelper.pod:299
 msgid ""
 "Some debhelper commands may make the generated package need to depend on "
 "some other packages. For example, if you use L<dh_installdebconf(1)>, your "
@@ -896,7 +899,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:300
+#: debhelper.pod:307
 msgid ""
 "All commands of this type, besides documenting what dependencies may be "
 "needed on their man pages, will automatically generate a substvar called "
@@ -911,7 +914,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:305
+#: debhelper.pod:312
 msgid ""
 "This is entirely independent of the standard ${shlibs:Depends} generated by "
 "L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>.  "
@@ -925,13 +928,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:310
+#: debhelper.pod:317
 msgid "Package build directories"
 msgstr "Répertoires de construction du paquet"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:312
+#: debhelper.pod:319
 msgid ""
 "By default, all debhelper programs assume that the temporary directory used "
 "for assembling the tree of files in a package is debian/<package>."
@@ -942,7 +945,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:315
+#: debhelper.pod:322
 msgid ""
 "Sometimes, you might want to use some other temporary directory. This is "
 "supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
@@ -962,13 +965,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:323
+#: debhelper.pod:330
 msgid "Debhelper compatibility levels"
 msgstr "Niveaux de compatibilité de debhelper"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:332
 msgid ""
 "From time to time, major non-backwards-compatible changes need to be made to "
 "debhelper, to keep it clean and well-designed as needs change and its author "
@@ -988,7 +991,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:332
+#: debhelper.pod:339
 msgid ""
 "Tell debhelper what compatibility level to use by writing a number to debian/"
 "compat. For example, to turn on V7 mode:"
@@ -999,7 +1002,7 @@ msgstr ""
 
 # type: verbatim
 #. type: verbatim
-#: debhelper.pod:335
+#: debhelper.pod:342
 #, no-wrap
 msgid ""
 "  % echo 7 > debian/compat\n"
@@ -1010,7 +1013,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:337
+#: debhelper.pod:344
 msgid ""
 "Unless otherwise indicated, all debhelper documentation assumes that you are "
 "using the most recent compatibility level, and in most cases does not "
@@ -1028,19 +1031,19 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:344
+#: debhelper.pod:351
 msgid "These are the available compatibility levels:"
 msgstr "Les niveaux de compatibilité sont les suivants :"
 
 # type: =item
 #. type: =item
-#: debhelper.pod:348
+#: debhelper.pod:355
 msgid "V1"
 msgstr "V1"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:350
+#: debhelper.pod:357
 msgid ""
 "This is the original debhelper compatibility level, and so it is the default "
 "one. In this mode, debhelper will use debian/tmp as the package tree "
@@ -1054,19 +1057,19 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:355 debhelper.pod:362 debhelper.pod:385 debhelper.pod:414
+#: debhelper.pod:362 debhelper.pod:369 debhelper.pod:392 debhelper.pod:421
 msgid "This mode is deprecated."
 msgstr "Ce mode est déconseillé."
 
 # type: =item
 #. type: =item
-#: debhelper.pod:357
+#: debhelper.pod:364
 msgid "V2"
 msgstr "V2"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:359
+#: debhelper.pod:366
 msgid ""
 "In this mode, debhelper will consistently use debian/<package> as the "
 "package tree directory for every package that is built."
@@ -1076,29 +1079,29 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:364
+#: debhelper.pod:371
 msgid "V3"
 msgstr "V3"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:366
+#: debhelper.pod:373
 msgid "This mode works like V2, with the following additions:"
 msgstr "Ce mode fonctionne comme V2 mais avec les ajouts suivants :"
 
 # type: =item
 #. type: =item
-#: debhelper.pod:370 debhelper.pod:375 debhelper.pod:379 debhelper.pod:393
-#: debhelper.pod:398 debhelper.pod:403 debhelper.pod:408 debhelper.pod:422
-#: debhelper.pod:426 debhelper.pod:431 debhelper.pod:435 debhelper.pod:447
-#: debhelper.pod:452 debhelper.pod:458 debhelper.pod:464 debhelper.pod:479
-#: debhelper.pod:486 debhelper.pod:490 debhelper.pod:494
+#: debhelper.pod:377 debhelper.pod:382 debhelper.pod:386 debhelper.pod:400
+#: debhelper.pod:405 debhelper.pod:410 debhelper.pod:415 debhelper.pod:429
+#: debhelper.pod:433 debhelper.pod:438 debhelper.pod:442 debhelper.pod:454
+#: debhelper.pod:459 debhelper.pod:465 debhelper.pod:471 debhelper.pod:486
+#: debhelper.pod:493 debhelper.pod:497 debhelper.pod:501
 msgid "-"
 msgstr "-"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:372
+#: debhelper.pod:379
 msgid ""
 "Debhelper config files support globbing via * and ?, when appropriate. To "
 "turn this off and use those characters raw, just prefix with a backslash."
@@ -1110,7 +1113,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:377
+#: debhelper.pod:384
 msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
 msgstr ""
 "Les scripts de maintenance du paquet (postinst et postrm) feront appel à "
@@ -1118,7 +1121,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:381
+#: debhelper.pod:388
 msgid ""
 "Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
 msgstr ""
@@ -1127,19 +1130,19 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:387
+#: debhelper.pod:394
 msgid "V4"
 msgstr "V4"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:389
+#: debhelper.pod:396
 msgid "Changes from V3 are:"
 msgstr "Les changements par rapport à la version 3 sont :"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:395
+#: debhelper.pod:402
 msgid ""
 "dh_makeshlibs -V will not include the debian part of the version number in "
 "the generated dependency line in the shlibs file."
@@ -1149,7 +1152,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:400
+#: debhelper.pod:407
 msgid ""
 "You are encouraged to put the new ${misc:Depends} into debian/control to "
 "supplement the ${shlibs:Depends} field."
@@ -1159,7 +1162,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:412
 msgid ""
 "dh_fixperms will make all files in bin/ directories and in etc/init.d "
 "executable."
@@ -1169,7 +1172,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:410
+#: debhelper.pod:417
 msgid "dh_link will correct existing links to conform with policy."
 msgstr ""
 "dh_link corrigera les liens existants pour les rendre conformes à la Charte "
@@ -1177,19 +1180,19 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:416
+#: debhelper.pod:423
 msgid "V5"
 msgstr "V5"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:425
 msgid "Changes from V4 are:"
 msgstr "Les changements par rapport à la version 4 sont :"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:424
+#: debhelper.pod:431
 msgid "Comments are ignored in debhelper config files."
 msgstr ""
 "Les commentaires sont ignorés dans les fichiers de configuration de "
@@ -1197,7 +1200,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:428
+#: debhelper.pod:435
 msgid ""
 "dh_strip --dbg-package now specifies the name of a package to put debugging "
 "symbols in, not the packages to take the symbols from."
@@ -1208,13 +1211,13 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:433
+#: debhelper.pod:440
 msgid "dh_installdocs skips installing empty files."
 msgstr "dh_installdocs saute l'installation des fichiers vides."
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:437
+#: debhelper.pod:444
 msgid "dh_install errors out if wildcards expand to nothing."
 msgstr ""
 "dh_install génère des erreurs si les jokers (wildcards) ne correspondent à "
@@ -1222,19 +1225,19 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:441
+#: debhelper.pod:448
 msgid "V6"
 msgstr "V6"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:443
+#: debhelper.pod:450
 msgid "Changes from V5 are:"
 msgstr "Les changements par rapport à la version 5 sont :"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:449
+#: debhelper.pod:456
 msgid ""
 "Commands that generate maintainer script fragments will order the fragments "
 "in reverse order for the prerm and postrm scripts."
@@ -1244,7 +1247,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:454
+#: debhelper.pod:461
 msgid ""
 "dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
 "it sees the man page in usr/share/man/man1 in the package build directory."
@@ -1255,7 +1258,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:460
+#: debhelper.pod:467
 msgid ""
 "dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
 "if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
@@ -1267,7 +1270,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:466
+#: debhelper.pod:473
 msgid ""
 "dh_installman allows overwriting existing man pages in the package build "
 "directory. In previous compatibility levels it silently refuses to do this."
@@ -1278,25 +1281,25 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:471
+#: debhelper.pod:478
 msgid "V7"
 msgstr "V7"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:473
+#: debhelper.pod:480
 msgid "This is the recommended mode of operation."
 msgstr "C'est la version dont l'usage est recommandé."
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:475
+#: debhelper.pod:482
 msgid "Changes from V6 are:"
 msgstr "Les changements par rapport à la version 6 sont :"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:481
+#: debhelper.pod:488
 msgid ""
 "dh_install, will fall back to looking for files in debian/tmp if it doesn't "
 "find them in the current directory (or wherever you tell it look using --"
@@ -1311,7 +1314,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:488
+#: debhelper.pod:495
 msgid "dh_clean will read debian/clean and delete files listed there."
 msgstr ""
 "dh_clean lit le répertoire debian/clean et supprime les fichiers qui y sont "
@@ -1319,13 +1322,13 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:492
+#: debhelper.pod:499
 msgid "dh_clean will delete toplevel *-stamp files."
 msgstr "dh_clean supprime les fichiers *-stamp."
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:496
+#: debhelper.pod:503
 msgid ""
 "dh_installchangelogs will guess at what file is the upstream changelog if "
 "none is specified."
@@ -1335,13 +1338,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:503
+#: debhelper.pod:510
 msgid "udebs"
 msgstr "udebs"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:505
+#: debhelper.pod:512
 msgid ""
 "Debhelper includes support for udebs. To create a udeb with debhelper, add "
 "\"XC-Package-Type: udeb\" to the package's stanza in debian/control, and "
@@ -1360,13 +1363,13 @@ msgstr ""
 
 # type: =head2
 #. type: =head2
-#: debhelper.pod:512
+#: debhelper.pod:519
 msgid "Other notes"
 msgstr "Autres remarques"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:514
+#: debhelper.pod:521
 msgid ""
 "In general, if any debhelper program needs a directory to exist under "
 "debian/, it will create it. I haven't bothered to document this in all the "
@@ -1384,7 +1387,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:520
+#: debhelper.pod:527
 msgid ""
 "Once your package uses debhelper to build, be sure to add debhelper to your "
 "Build-Depends line in debian/control. You should build-depend on a version "
@@ -1400,7 +1403,7 @@ msgstr ""
 
 # type: verbatim
 #. type: verbatim
-#: debhelper.pod:526
+#: debhelper.pod:533
 #, no-wrap
 msgid ""
 "  Build-Depends: debhelper (>= 7)\n"
@@ -1411,19 +1414,19 @@ msgstr ""
 
 # type: =head1
 #. type: =head1
-#: debhelper.pod:528
+#: debhelper.pod:535
 msgid "ENVIRONMENT"
 msgstr "VARIABLES D'ENVIRONNEMENT"
 
 # type: =item
 #. type: =item
-#: debhelper.pod:532
+#: debhelper.pod:539
 msgid "DH_VERBOSE"
 msgstr "DH_VERBOSE"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:534
+#: debhelper.pod:541
 msgid ""
 "Set to 1 to enable verbose mode. Debhelper will output every command it runs "
 "that modifies files on the build system."
@@ -1433,13 +1436,13 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:537
+#: debhelper.pod:544
 msgid "DH_COMPAT"
 msgstr "DH_COMPAT"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:539
+#: debhelper.pod:546
 msgid ""
 "Temporarily specifies what compatibility level debhelper should run at, "
 "overriding any value in debian/compat."
@@ -1449,25 +1452,25 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:542
+#: debhelper.pod:549
 msgid "DH_NO_ACT"
 msgstr "DH_NO_ACT"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:544
+#: debhelper.pod:551
 msgid "Set to 1 to enable no-act mode."
 msgstr "Mettre cette variable à 1 pour activer le mode simulation (no-act)."
 
 # type: =item
 #. type: =item
-#: debhelper.pod:546
+#: debhelper.pod:553
 msgid "DH_OPTIONS"
 msgstr "DH_OPTIONS"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:548
+#: debhelper.pod:555
 msgid ""
 "Anything in this variable will be prepended to the command line arguments of "
 "all debhelper commands. Command-specific options will be ignored by commands "
@@ -1479,7 +1482,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:552
+#: debhelper.pod:559
 msgid ""
 "This is useful in some situations, for example, if you need to pass -p to "
 "all debhelper commands that will be run. One good way to set DH_OPTIONS is "
@@ -1494,13 +1497,13 @@ msgstr ""
 
 # type: =item
 #. type: =item
-#: debhelper.pod:557
+#: debhelper.pod:564
 msgid "DH_ALWAYS_EXCLUDE"
 msgstr "DH_ALWAYS_EXCLUDE"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:559
+#: debhelper.pod:566
 msgid ""
 "If set, this adds the value the variable is set to to the -X options of all "
 "commands that support the -X option. Moreover, dh_builddeb will rm -rf "
@@ -1513,7 +1516,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:563
+#: debhelper.pod:570
 msgid ""
 "This can be useful if you are doing a build from a CVS source tree, in which "
 "case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from "
@@ -1532,7 +1535,7 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:570
+#: debhelper.pod:577
 msgid ""
 "Multiple things to exclude can be separated with colons, as in "
 "DH_ALWAYS_EXCLUDE=CVS:.svn"
@@ -1542,9 +1545,9 @@ msgstr ""
 
 # type: =head1
 #. type: =head1
-#: debhelper.pod:575 dh:661 dh_auto_build:47 dh_auto_clean:48
+#: debhelper.pod:582 dh:678 dh_auto_build:47 dh_auto_clean:48
 #: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122
-#: dh_builddeb:91 dh_clean:138 dh_compress:199 dh_desktop:31 dh_fixperms:122
+#: dh_builddeb:91 dh_clean:138 dh_compress:202 dh_desktop:31 dh_fixperms:122
 #: dh_gconf:110 dh_gencontrol:82 dh_icons:65 dh_install:274
 #: dh_installcatalogs:116 dh_installchangelogs:169 dh_installcron:77
 #: dh_installdeb:108 dh_installdebconf:126 dh_installdirs:86
@@ -1563,34 +1566,34 @@ msgstr "VOIR AUSSI"
 
 # type: =item
 #. type: =item
-#: debhelper.pod:579
+#: debhelper.pod:586
 msgid "F</usr/share/doc/debhelper/examples/>"
 msgstr "F</usr/share/doc/debhelper/examples/>"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:581
+#: debhelper.pod:588
 msgid "A set of example debian/rules files that use debhelper."
 msgstr ""
 "Un ensemble d'exemples de fichiers debian/rules qui utilisent debhelper."
 
 # type: =item
 #. type: =item
-#: debhelper.pod:583
+#: debhelper.pod:590
 msgid "L<http://kitenet.net/~joey/code/debhelper/>"
 msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:585
+#: debhelper.pod:592
 msgid "Debhelper web site."
 msgstr "Le site internet de debhelper."
 
 # type: =head1
 #. type: =head1
-#: debhelper.pod:589 dh:667 dh_auto_build:53 dh_auto_clean:54
+#: debhelper.pod:596 dh:684 dh_auto_build:53 dh_auto_clean:54
 #: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130
-#: dh_builddeb:97 dh_clean:144 dh_compress:205 dh_desktop:37 dh_fixperms:128
+#: dh_builddeb:97 dh_clean:144 dh_compress:208 dh_desktop:37 dh_fixperms:128
 #: dh_gconf:116 dh_gencontrol:88 dh_icons:71 dh_install:280
 #: dh_installcatalogs:122 dh_installchangelogs:175 dh_installcron:83
 #: dh_installdeb:114 dh_installdebconf:132 dh_installdirs:92
@@ -1609,9 +1612,9 @@ msgstr "AUTEUR"
 
 # type: textblock
 #. type: textblock
-#: debhelper.pod:591 dh:669 dh_auto_build:55 dh_auto_clean:56
+#: debhelper.pod:598 dh:686 dh_auto_build:55 dh_auto_clean:56
 #: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:99
-#: dh_clean:146 dh_compress:207 dh_fixperms:130 dh_gencontrol:90
+#: dh_clean:146 dh_compress:210 dh_fixperms:130 dh_gencontrol:90
 #: dh_install:282 dh_installchangelogs:177 dh_installcron:85 dh_installdeb:116
 #: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:309
 #: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
@@ -1713,7 +1716,7 @@ msgstr ""
 #| "7.0.50 or above.)"
 msgid ""
 "If debian/rules contains a target with a name like \"override_I<dh_command>"
-"\", then when it would notmally run I<dh_command>, dh will instead call that "
+"\", then when it would normally run I<dh_command>, dh will instead call that "
 "target. The override target can then run the command with additional "
 "options, or run entirely different commands instead. See examples below. "
 "(Note that to use this feature, you should Build-Depend on debhelper 7.0.50 "
@@ -1846,6 +1849,8 @@ msgstr ""
 msgid ""
 "Prints commands that would run for a given sequence, but does not run them."
 msgstr ""
+"Affiche les commandes qui seraient utilisées pour une séquence donnée, sans "
+"les exécuter."
 
 # type: textblock
 #. type: textblock
@@ -1862,23 +1867,17 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh:90
-#, fuzzy
-#| msgid ""
-#| "I<cmd> can be a full name of a debhelper command, or a substring. It'll "
-#| "first search for a command in the sequence exactly matching the name, to "
-#| "avoid any ambiguity. If there are multiple substring matches, the last "
-#| "one in the sequence will be used."
 msgid ""
 "In the above options, I<cmd> can be a full name of a debhelper command, or a "
 "substring. It'll first search for a command in the sequence exactly matching "
 "the name, to avoid any ambiguity. If there are multiple substring matches, "
 "the last one in the sequence will be used."
 msgstr ""
-"I<commande> peut être soit le nom complet de la commande debhelper, soit une "
-"sous-chaîne de ce nom. dh cherchera d'abord, dans la séquence, une commande "
-"portant le nom exact pour éviter toute ambiguïté. Si plusieurs commandes "
-"correspondent à la sous-chaîne la dernière de la séquence sera prise en "
-"compte."
+"Dans les options ci-dessus, I<commande> peut être soit le nom complet de la "
+"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, "
+"dans la séquence, une commande portant le nom exact pour éviter toute "
+"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière "
+"de la séquence sera prise en compte."
 
 # type: =head1
 #. type: =head1
@@ -2051,52 +2050,38 @@ msgstr ""
 msgid ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --with python-central $@\n"
+"\t\tdh $@ --with python-central\n"
 "\n"
 msgstr ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --with python-central $@\n"
+"\t\tdh $@ --with python-central\n"
 "\n"
 
 # type: textblock
 #. type: textblock
 #: dh:180
-#, fuzzy
-#| msgid ""
-#| "Here is an example of overriding where the dh_auto_* commands find the "
-#| "package's source, for a package where the source is located in a "
-#| "subdirectory. It also forces use of perl's Module::Build build system, "
-#| "which can be necessary if debhelper wrongly detects that the package uses "
-#| "MakeMaker."
 msgid ""
 "Here is how to force use of perl's Module::Build build system, which can be "
 "necessary if debhelper wrongly detects that the package uses MakeMaker."
 msgstr ""
-"Voici un exemple de remplacement où les commandes dh_auto_* cherchent la "
-"source du paquet car elle est située dans un sous-répertoire. Il oblige "
-"également à utiliser le processus de construction Module::Build, propre à "
-"perl, qui pourra être indispensable si debhelper détectait, à tort, que le "
-"paquet utilise MakeMaker."
+"Voici comment forcer l'utilisation du processus de construction Module::"
+"Build, propre à perl, qui pourra être indispensable si debhelper détectait, "
+"à tort, que le paquet utilise MakeMaker."
 
 # type: verbatim
 #. type: verbatim
 #: dh:184
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh --sourcedirectory=src --buildsystem=perl_build $@\n"
-#| "\n"
+#, no-wrap
 msgid ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --buildsystem=perl_build $@\n"
+"\t\tdh $@ --buildsystem=perl_build\n"
 "\n"
 msgstr ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --sourcedirectory=src --buildsystem=perl_build $@\n"
+"\t\tdh --buildsystem=perl_build $@\n"
 "\n"
 
 # type: verbatim
@@ -2119,71 +2104,73 @@ msgstr ""
 msgid ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --with quilt $@\n"
+"\t\tdh $@ --with quilt\n"
 "\n"
 msgstr ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --with quilt $@\n"
+"\t\tdh $@ --with quilt\n"
 "\n"
 
 # type: textblock
 #. type: textblock
 #: dh:195
-#, fuzzy
-#| msgid ""
-#| "Here is an example of overriding where the dh_auto_* commands find the "
-#| "package's source, for a package where the source is located in a "
-#| "subdirectory. It also forces use of perl's Module::Build build system, "
-#| "which can be necessary if debhelper wrongly detects that the package uses "
-#| "MakeMaker."
 msgid ""
 "Here is an example of overriding where the dh_auto_* commands find the "
 "package's source, for a package where the source is located in a "
 "subdirectory."
 msgstr ""
 "Voici un exemple de remplacement où les commandes dh_auto_* cherchent la "
-"source du paquet car elle est située dans un sous-répertoire. Il oblige "
-"également à utiliser le processus de construction Module::Build, propre à "
-"perl, qui pourra être indispensable si debhelper détectait, à tort, que le "
-"paquet utilise MakeMaker."
+"source du paquet car elle est située dans un sous-répertoire."
 
 # type: verbatim
 #. type: verbatim
 #: dh:199
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh --sourcedirectory=src --buildsystem=perl_build $@\n"
-#| "\n"
+#, no-wrap
 msgid ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --sourcedirectory=src $@\n"
+"\t\tdh $@ --sourcedirectory=src\n"
 "\n"
 msgstr ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
-"\t\tdh --sourcedirectory=src --buildsystem=perl_build $@\n"
+"\t\tdh --sourcedirectory=src $@\n"
 "\n"
 
 #. type: textblock
 #: dh:203
 msgid ""
+"And here is an example of how to tell the dh_auto_* commands to build in a "
+"subdirectory, which will be removed on clean."
+msgstr ""
+
+# type: verbatim
+#. type: verbatim
+#: dh:206
+#, no-wrap
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --builddirectory=build\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --builddirectory=build\n"
+"\n"
+
+#. type: textblock
+#: dh:210
+msgid ""
 "Finally, here is a way to prevent dh from running several commands that you "
 "don't want it to run, by defining empty override targets for each command."
 msgstr ""
 
 # type: verbatim
 #. type: verbatim
-#: dh:207
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh $@\n"
-#| "\n"
+#: dh:214
+#, no-wrap
 msgid ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
@@ -2193,10 +2180,10 @@ msgstr ""
 "\t#!/usr/bin/make -f\n"
 "\t%:\n"
 "\t\tdh $@\n"
-"\n"
+"\t\n"
 
 #. type: verbatim
-#: dh:211
+#: dh:218
 #, no-wrap
 msgid ""
 "\t# Commands not to run:\n"
@@ -2206,9 +2193,9 @@ msgstr ""
 
 # type: textblock
 #. type: textblock
-#: dh:663 dh_auto_build:49 dh_auto_clean:50 dh_auto_configure:55
+#: dh:680 dh_auto_build:49 dh_auto_clean:50 dh_auto_configure:55
 #: dh_auto_install:87 dh_auto_test:60 dh_builddeb:93 dh_clean:140
-#: dh_compress:201 dh_fixperms:124 dh_gconf:112 dh_gencontrol:84
+#: dh_compress:204 dh_fixperms:124 dh_gconf:112 dh_gencontrol:84
 #: dh_install:276 dh_installcatalogs:118 dh_installchangelogs:171
 #: dh_installcron:79 dh_installdeb:110 dh_installdebconf:128 dh_installdirs:88
 #: dh_installdocs:303 dh_installemacsen:126 dh_installexamples:108
@@ -2225,9 +2212,9 @@ msgstr "L<debhelper(7)>"
 
 # type: textblock
 #. type: textblock
-#: dh:665 dh_auto_build:51 dh_auto_clean:52 dh_auto_configure:57
+#: dh:682 dh_auto_build:51 dh_auto_clean:52 dh_auto_configure:57
 #: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:95
-#: dh_clean:142 dh_compress:203 dh_desktop:35 dh_fixperms:126 dh_gconf:114
+#: dh_clean:142 dh_compress:206 dh_desktop:35 dh_fixperms:126 dh_gconf:114
 #: dh_gencontrol:86 dh_icons:69 dh_install:278 dh_installchangelogs:173
 #: dh_installcron:81 dh_installdeb:112 dh_installdebconf:130 dh_installdirs:90
 #: dh_installdocs:305 dh_installemacsen:128 dh_installexamples:110
@@ -2353,7 +2340,7 @@ msgstr ""
 "appropriées du processus de construction d'après le type du paquet. Par "
 "exemple, s'il trouve un fichier Makefile et qu'il contient une instruction "
 "« distclean », « realclean », « clean », il fait le ménage en exécutant make "
-"(ou MAKE si les variables d'environnement sont définies). S'il y a un "
+"(ou MAKE si cette variable d'environnement est définie). S'il y a un "
 "fichier setup.py ou ou Built.PL il les lance pour réaliser le ménage du "
 "paquet."
 
@@ -2484,7 +2471,7 @@ msgid ""
 "installation, so dh_auto_install will not install files built using Ant."
 msgstr ""
 "dh_auto_install est un programme de la suite debhelper qui tente d'installer "
-"automatiqument les fichier construits. Il le fait en lançant les commandes "
+"automatiquement les fichier construits. Il le fait en lançant les commandes "
 "appropriées du processus de construction d'après le type du paquet. Par "
 "exemple, s'il y a un Makefile et qu'il contient un bloc « install » il "
 "exécutera make (ou MAKE si les variables d'environnement sont définies). "
@@ -2595,8 +2582,8 @@ msgstr ""
 "automatiquement le jeu d'essai d'un paquet. Il le fait en lançant les "
 "commandes appropriées du processus de construction d'après le type du "
 "paquet. Par exemple, s'il y a un Makefile et qu'il contient un bloc « test » "
-"ou « check » il exécutera make (ou MAKE si les variables d'environnement sont "
-"définies). Si les tests produisent une erreur, la commande retourne une "
+"ou « check » il exécutera make (ou MAKE si cette variable d'environnement est "
+"définie). Si les tests produisent une erreur, la commande retourne une "
 "valeur non nulle. S'il n'y a pas de jeu de d'essai, la commande retourne "
 "zéro sans rien faire."
 
@@ -2731,12 +2718,12 @@ msgid ""
 "The contents of this file are displayed to the user by the bug reporting "
 "tool before allowing the user to write a bug report on the package to the "
 "Debian Bug Tracking System. This file is installed as F<usr/share/bug/"
-"package/control> in the package build directory."
+"package/presubj> in the package build directory."
 msgstr ""
 "Le contenu de ce fichier est affiché à l'utilisateur par l'outil de rapport "
 "de bogue afin de lui permettre de rédiger un rapport de bogue contre le "
 "paquet dans le système de suivi des bogues Debian. Ce fichier est installé "
-"sous F<usr/share/bug/paquet/control/> dans le répertoire de construction du "
+"sous F<usr/share/bug/paquet/presubj> dans le répertoire de construction du "
 "paquet."
 
 # type: textblock
@@ -2841,6 +2828,8 @@ msgid ""
 "This is another way to pass I<params> to L<dpkg-deb(1)>.  It is deprecated; "
 "use B<--> instead."
 msgstr ""
+"Méthode obsolète pour fournir les I<paramètres> à L<dpkg-deb(1)>, préférer "
+"B<-->."
 
 # type: textblock
 #. type: textblock
@@ -3007,15 +2996,7 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh_compress:24
-#, fuzzy
 #| msgid ""
-#| "By default, dh_compress compresses files that debian policy mandates "
-#| "should be compressed, namely all files in usr/share/info, usr/share/man, "
-#| "usr/X11R6/man, files in usr/share/doc that are larger than 4k in size, "
-#| "(except the copyright file, .html and .css files, image files, and files "
-#| "that appear to be already compressed based on their extensions), and all "
-#| "changelog files. Plus PCF fonts underneath usr/X11R6/lib/X11/fonts/ and "
-#| "usr/share/fonts/X11/"
 msgid ""
 "By default, dh_compress compresses files that debian policy mandates should "
 "be compressed, namely all files in usr/share/info, usr/share/man, files in "
@@ -3026,12 +3007,11 @@ msgid ""
 msgstr ""
 "Par défaut, dh_compress comprime les fichiers que la Charte Debian indique "
 "comme devant être comprimés. Cela concerne tous les fichiers de usr/share/"
-"info, usr/share/man, usr/X11R6/man, tous les fichiers changelog ainsi que "
-"les polices PCF stockées dans usr/X11R6/lib/X11/fonts/ et usr/share/fonts/"
-"X11/. Il comprimera également les fichiers de usr/share/doc qui font plus de "
-"4ko, à l'exception du fichier de copyright, des fichiers suffixés par .html "
-"et .css, des fichiers image et des fichiers qui paraissent, de par leur "
-"extension, avoir déjà été comprimés."
+"info, usr/share/man, tous les fichiers changelog ainsi que les polices PCF "
+"stockées dans usr/share/fonts/X11/. Il comprimera également les fichiers de "
+"usr/share/doc qui font plus de 4ko, à l'exception du fichier de copyright, "
+"des fichiers suffixés par .html et .css, des fichiers image et des fichiers "
+"qui paraissent, de par leur extension, avoir déjà été comprimés."
 
 # type: =item
 #. type: =item
@@ -5367,8 +5347,8 @@ msgid ""
 "dh_installlogcheck is a debhelper program that is responsible for installing "
 "logcheck rule files."
 msgstr ""
-"dh_installlogcheck est le programme de la suite debhelper chargé "
-"del'installation des fichiers de règles de vérification des journaux "
+"dh_installlogcheck est le programme de la suite debhelper chargé de "
+"l'installation des fichiers de règles de vérification des journaux "
 "(logcheckrule files) "
 
 # type: =item
@@ -5637,11 +5617,10 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh_installmanpages:5
-#, fuzzy
-#| msgid "dh_installmanpages - old-style man page installer"
 msgid "dh_installmanpages - old-style man page installer (deprecated)"
 msgstr ""
-"dh_installmanpages - ancien programme d'installation des pages de manuel"
+"dh_installmanpages - ancien programme d'installation des pages de manuel "
+"(obsolète)"
 
 # type: textblock
 #. type: textblock
@@ -5652,19 +5631,14 @@ msgstr "B<dh_installmanpages> [I<options de debhelper>] [I<fichier ...>]"
 # type: textblock
 #. type: textblock
 #: dh_installmanpages:19
-#, fuzzy
-#| msgid ""
-#| "dh_installmanpages is a debhelper program that is responsible for "
-#| "automatically installing man pages into usr/share/man/ and usr/X11R6/man/ "
-#| "in package build directories."
 msgid ""
 "dh_installmanpages is a debhelper program that is responsible for "
 "automatically installing man pages into usr/share/man/ in package build "
 "directories."
 msgstr ""
 "dh_installmanpages est l'ancien programme de la suite debhelper chargé de "
-"l'installation automatique des pages de manuel dans les répertoires usr/"
-"share/man/ et usr/X11R6/man/ du répertoire de construction du paquet."
+"l'installation automatique des pages de manuel dans le répertoire usr/share/"
+"man/ du répertoire de construction du paquet."
 
 # type: textblock
 #. type: textblock
@@ -6583,10 +6557,8 @@ msgstr ""
 # type: =item
 #. type: =item
 #: dh_lintian:31
-#, fuzzy
-#| msgid "debian/I<source>.lintian-overrides"
 msgid "debian/source.lintian-overrides"
-msgstr "debian/I<source>.lintian-overrides"
+msgstr "debian/source.lintian-overrides"
 
 # type: textblock
 #. type: textblock
@@ -6703,7 +6675,7 @@ msgstr ""
 "Ces fichiers de symboles, s'ils existent, sont transmis à L<dpkg-gensymbols"
 "(1)> pour être traités et installés. Préciser le nom de l'architecture avec "
 "I<arch> s'il est nécessaire de fournir des fichiers de symboles différents "
-"pour diverses achitectures."
+"pour diverses architectures."
 
 # type: =item
 #. type: =item
@@ -6808,8 +6780,8 @@ msgid ""
 "package."
 msgstr ""
 "Ajoute une ligne supplémentaire, pour les udebs, dans le fichier shlibs et "
-"rend les udebs dépendants du paquet indiqué par « udeb » au lieu qu'ils "
-"soient dépendants du paquet normal de la bibliothèque."
+"rend les udebs dépendants du paquet indiqué par « udeb » plutôt que les "
+"rendre dépendants du paquet normal de la bibliothèque."
 
 # type: textblock
 #. type: textblock
@@ -7246,16 +7218,12 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh_python:5
-#, fuzzy
-#| msgid ""
-#| "dh_python - calculates python dependencies and adds postinst and prerm "
-#| "python scripts"
 msgid ""
 "dh_python - calculates python dependencies and adds postinst and prerm "
 "python scripts (deprecated)"
 msgstr ""
 "dh_python - détermine les dépendances Python et ajoute des scripts de "
-"maintenance Python postinst et prerm"
+"maintenance Python postinst et prerm (obsolète)"
 
 # type: textblock
 #. type: textblock
@@ -7507,8 +7475,8 @@ msgstr "B<-l>I<répertoire>[:répertoire:répertoire:..]"
 msgid ""
 "With recent versions of dpkg-shlibdeps, this option is generally not needed."
 msgstr ""
-"Avec les versions récente de dpkg-shlibdeps, cette option n'est généralement "
-"plus nécessaire."
+"Avec les versions récentes de dpkg-shlibdeps, cette option n'est "
+"généralement plus nécessaire."
 
 # type: textblock
 #. type: textblock
@@ -7789,10 +7757,8 @@ msgstr "Charte Debian, version 3.0.1"
 # type: textblock
 #. type: textblock
 #: dh_suidregister:5
-#, fuzzy
-#| msgid "dh_suidregister - obsolete suid registration program"
 msgid "dh_suidregister - suid registration program (deprecated)"
-msgstr "dh_suidregister - programme obsolète d'inscription suid"
+msgstr "dh_suidregister - programme d'inscription suid (obsolète)"
 
 # type: textblock
 #. type: textblock
@@ -7803,12 +7769,6 @@ msgstr "Ne pas l'utiliser !"
 # type: textblock
 #. type: textblock
 #: dh_suidregister:13
-#, fuzzy
-#| msgid ""
-#| "This program used to register suid and sgid files with L<suidregister(1)"
-#| ">, but with the introduction of L<dpkg-statoverride(8)>, registration of "
-#| "files in this way is unnecessary, and even harmful, so this program "
-#| "should not be used."
 msgid ""
 "This program used to register suid and sgid files with L<suidregister(1)>, "
 "but with the introduction of L<dpkg-statoverride(8)>, registration of files "
@@ -7818,7 +7778,7 @@ msgstr ""
 "Ce programme était utilisé pour l'inscription des fichiers suid et sgid avec "
 "L<suidregister(1)> mais l'introduction de L<dpkg-statoverride(8)> a rendu "
 "l'inscription de ces fichiers inutile et même néfaste. De ce fait, ce "
-"programme ne doit pas être employé."
+"programme est obsolète et ne doit pas être employé."
 
 # type: =head1
 #. type: =head1
@@ -7925,14 +7885,12 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh_testversion:5
-#, fuzzy
-#| msgid ""
-#| "dh_testversion - ensure that the correct version of debhelper is installed"
 msgid ""
 "dh_testversion - ensure that the correct version of debhelper is installed "
 "(deprecated)"
 msgstr ""
-"dh_testversion - vérifie que la bonne version de debhelper est installée"
+"dh_testversion - vérifie que la bonne version de debhelper est installée "
+"(obsolète)"
 
 # type: textblock
 #. type: textblock
@@ -7968,8 +7926,8 @@ msgid ""
 "introduced, and your package requires that feature to build correctly. Use "
 "debhelper's changelog to figure out the version you need."
 msgstr ""
-"Il est possible d'utiliser ce programme dans le fichier debian/rule si une "
-"nouvelle fonctionalité de debhelper est introduite et que le paquet "
+"Il est possible d'utiliser ce programme dans le fichier debian/rules si une "
+"nouvelle fonctionnalité de debhelper est introduite et que le paquet "
 "nécessite cette fonctionnalité pour être correctement construit. Consulter "
 "le changelog de debhelper pour déterminer la version nécessaire."
 
@@ -8026,12 +7984,10 @@ msgstr ""
 # type: textblock
 #. type: textblock
 #: dh_undocumented:5
-#, fuzzy
-#| msgid "dh_undocumented - obsolete undocumented.7 symlink program"
 msgid "dh_undocumented - undocumented.7 symlink program (deprecated no-op)"
 msgstr ""
-"dh_undocumented - programme obsolète de création de liens symboliques vers "
-"« undocumented.7 »"
+"dh_undocumented - programme de création de liens symboliques vers "
+"« undocumented.7 » (obsolète)"
 
 # type: textblock
 #. type: textblock
-- 
1.5.6.5


Reply to: