[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[TAF] templates://dictionaries-common/{dictionaries-common.templates}



The dictionaries-common package introduced new or modified debconf
templates. This is often a good moment for a review to help the
package maintainer following the general suggested writing style and
track down typos and errors in the use of English language.

A bug report has been sent against the package: 752045

If someone wants to pick up this review, please answer to this mail,
in the mailing list, with an [ITR] (Intent To Review) label.

The templates file is attached.

To propose the file you reviewed for peer review, please send a [RFR]
(Request For Review) mail with the reviewed file attached...then a few
days later, when no more contributions come, a summary mail with a
[LCFC] (Last Chance For Comments) label.

These RFR and LCFC mails should CC the opened bug report.

Finally, after no more comments coming to the LCFC mail, you can send
the reviewed templates file in the bug report.

Then, please notify the list with a last mail using a [BTS] label
with the bug number.

Helping the package maintainer to deal with induced translation
updates at that moment will be nice. If you're not comfortable with
that part of the process, please hand it off to a translator.

-- 


Template: dictionaries-common/invalid_debconf_value
Type: note
_Description: An invalid or empty debconf value "${value}" has been found.
 It does not correspond to any installed package in the system.
 .
 If above value is "000" or empty this might be caused by debconf
 database corruption.
 See "/usr/share/doc/dictionaries-common/README.problems", section
 "Debconf database corruption".
 In this case, running "/usr/share/debconf/fix_db.pl" can help to put
 debconf database in a consistent state.
 .
 This can also be caused by problems during installation of packages,
 like package providing wrong value being selected for installation
 but finally not installed because of errors in other packages.
 To fix this error, reinstall (or install) the package that provides
 the wrong value.
 Then, if you don't want this package in your system, remove it, which
 will also remove its debconf entries.
 .
 This error message can also appear during ispell dictionary or wordlist
 renaming (e.g., wenglish-> wamerican).
 In this case it is harmless and everything will be fixed after you
 select your default in the menu(s) shown after this message.
 .
 Question may be asked after this message to try leaving the
 dictionaries system in a (provisionally) working state.

Template: dictionaries-common/default-ispell
Type: select
Choices-C: ${choices}, Manual symlink setting
__Choices: ${echoices}, Manual symlink setting
_Description: System default ispell dictionary:
 Please indicate which dictionary ispell should use as system-wide
 default when no other spell-checking dictionary is specified.
 .
 This sets up the /usr/lib/ispell/default.aff and
 /usr/lib/ispell/default.hash symlinks, as well as ispell's global
 ispell-wrapper and Emacs defaults.
 .
 Use "Manual symlink setting" if you want to handle the symlinks
 yourself. In this case ispell will have no global ispell-wrapper or
 Emacs defaults.
 .
 The default ispell dictionary can be changed at any time by running
 "select-default-ispell".

Template: dictionaries-common/default-wordlist
Type: select
Choices-C: ${choices}, Manual symlink setting
__Choices: ${echoices}, Manual symlink setting
_Description: System default wordlist:
 Please indicate which wordlist the "/usr/share/dict/words" symlink
 should point to. This will provide a simple list of dictionary words
 for basic spell-checking and word searches. Use "Manual symlink
 setting" if you want to handle this symlink yourself.
 .
 The default wordlist can be changed at any time by running
 "select-default-wordlist".

Template: dictionaries-common/move_old_usr_dict
Type: boolean
Default: true
_Description: Move non-FHS stuff under /usr/dict to /usr/dict-pre-FHS?
 Some stuff under /usr/dict that is not a symlink to /usr/share/dict has
 been detected in your system. /usr/share/dict is now the FHS location for
 those files. Everything under /usr/dict can be moved to /usr/dict-pre-FHS
 and a symlink /usr/dict -> /usr/share/dict set.
 .
 Although no current Debian package uses that obsolete /usr/dict location,
 not having that symlink may break some of your old applications that used
 it, so you are encouraged to let the files be moved and the link be set up.

Template: dictionaries-common/old_wordlist_link
Type: boolean
Default: true
_Description: Remove obsolete /etc/dictionary link?
 There is a /etc/dictionary link in your system. This is obsolete and no
 longer means anything. You are strongly suggested to allow removal of that
 link.
 .
 You will be called to explicitly select the default wordlist during
 installation of wordlist packages. You can change your selection at any
 time by running 'select-default-wordlist'.

Template: dictionaries-common/ispell-autobuildhash-message
Type: note
_Description: Problems rebuilding an ${xxpell} hash file (${hashfile})
 ** Error: ${errormsg}
 .
 This error was caused by package providing '${hashfile}', although it
 can be made evident during other package postinst. Please complain
 to the maintainer of package providing '${hashfile}'.
 .
 Until this problem is fixed you will not be able to use ${xxpell}
 with '${hashfile}'.

Template: dictionaries-common/remove_old_usr_dict_link
Type: boolean
Default: true
_Description: Remove obsolete /usr/dict symlink?
 A non FHS /usr/dict symlink has been found. Since it is obsolete,
 no Debian package currently uses that location and none of your programs
 should rely on it, so you are strongly suggested to accept its removal.
 .
 If for whatever reason you need that symlink, recreate it again, but you
 are suggested to better fix your old programs to use the current
 /usr/share/dict location.

Template: dictionaries-common/selecting_ispell_wordlist_default
Type: note
_Description: Default values for ispell dictionary/wordlist are not set here
 Running 'dpkg-reconfigure dictionaries-common' will not set the default
 values for ispell dictionary/wordlist. Running 'dpkg-reconfigure ispell'
 will not set the default ispell dictionary.
 .
 Use instead 'select-default-ispell' or 'select-default-wordlist' scripts.

Source: dictionaries-common
Section: text
Priority: optional
Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Uploaders: Rene Engelhard <rene@debian.org>
Build-Depends-Indep: docbook-xml,
 docbook-dsssl,
 jade,
 w3m,
 slice,
 autoconf,
 recode
Build-Depends: debhelper (>= 7),
 quilt (>= 0.40)
Homepage: http://dict-common.alioth.debian.org
Vcs-Browser: http://anonscm.debian.org/gitweb/?p=dict-common/dictionaries-common.git;a=summary
Vcs-Git: git://anonscm.debian.org/dict-common/dictionaries-common.git
Standards-Version: 3.9.5

Package: dictionaries-common
Architecture: all
Depends: ${perl:Depends},
 ${misc:Depends},
 debconf (>= 1.5.5) | debconf-2.0,
 libtext-iconv-perl,
 emacsen-common (>= 2.0.8)
Breaks: hunspell-ar (<= 0.0.0+20080110-1.1),
 hunspell-da    (<= 1:3.1.0),
 hunspell-de-at (<= 20100727-1),
 hunspell-de-ch (<= 20100727-1),
 hunspell-de-de (<= 20100727-1),
 hunspell-en-us (<= 20070829-4ubuntu2),
 hunspell-eu-es (<= 0.4.20081029-4),
 hunspell-gl-es (<= 2.2a-8),
 hunspell-kk (<= 1.1-1),
 hunspell-ko (<= 0.5.3-1),
 hunspell-se (<= 1.0~beta6.20081222-1.1),
 hunspell-uz (<= 0.6-3.1),
 hyphen-en-us (<< 2.8.3-1),
 myspell-bg (<= 3.0-12),
 myspell-ca (<= 0.6-10),
 myspell-cs (<= 20040229-5),
 myspell-cs-cz (<= 20040229-5),
 myspell-da (<= 1.6.25-1),
 myspell-de-at (<= 20100727-1),
 myspell-de-ch (<= 20100727-1),
 myspell-de-de (<= 20100727-1),
 myspell-de-de-oldspell (<= 1:2-27),
 myspell-el-gr (<= 0.8-1),
 myspell-en-au (<= 2.1-5),
 myspell-eo (<= 2.1.2000.02.25-42),
 myspell-es (<= 1.11-1),
 myspell-et (<= 1:20030606-12.1),
 myspell-eu-es (<= 0.4.20081029-4),
 myspell-fa (<= 0.20070816-2),
 myspell-fi (<= 0.7-17.3),
 myspell-fo (<= 0.2.44-2),
 myspell-fr (<= 1.4-25),
 myspell-fr-gut (<= 1:1.0-28),
 myspell-ga (<= 2.0-20),
 myspell-gd (<= 0.50-7),
 myspell-gl-es (<= 2.2a-8),
 myspell-gv (<= 0.50-9),
 myspell-he (<= 1.1-1),
 myspell-hr (<= 20060617-2),
 myspell-hu (<= 0.99.4-2),
 myspell-hy (<= 0.20.0-1),
 myspell-ku (<= 0.20.0-1.1),
 myspell-lv (<= 0.9.3-2),
 myspell-nb (<= 2.0.10-3.2),
 myspell-nl (<= 1:2.0-1),
 myspell-nn (<= 2.0.10-3.2),
 myspell-nr (<< 20070206-4ubuntu1),
 myspell-ns (<< 20070206-4ubuntu1),
 myspell-pl (<= 20100612-1),
 myspell-pt-br (<= 20101030-1),
 myspell-pt-pt (<= 20091013-2),
 myspell-ru (<= 0.99g5-8.1),
 myspell-sk (<= 0.5.5a-2.1fakesync1),
 myspell-sl (<< 1.0-3ubuntu1),
 myspell-sv-se (<= 1.3.8-6-2.2),
 myspell-ss (<< 20070206-4ubuntu1),
 myspell-uk (<= 1.6.0-1),
 myspell-tn (<< 20070206-4ubuntu1),
 myspell-ts (<< 20070207-4ubuntu1),
 myspell-ve (<< 20070206-3ubuntu1),
 myspell-xh (<< 20070206-4ubuntu1),
 myspell-zu (<< 20070207-5ubuntu1),
 mythes-it (<= 2.0.7.gh.deb1-3),
 openoffice.org-thesaurus-it (<< 2.0.7.gh.deb1-1.1ubuntu3)
Provides: openoffice.org-updatedicts
Replaces: openoffice.org-updatedicts
Suggests: ispell | aspell | hunspell,
	  wordlist
Description: Common utilities for spelling dictionary tools
 These are utilities shared by all ispell, myspell and wordlist
 dictionaries, including support for some tools that use them
 (like emacsen, jed and mutt) and some patched spell-checking
 lisp files for better system integration.
 More info about naming conventions and availability of those
 dictionaries in the README.Debian file.

Package: dictionaries-common-dev
Priority: extra
Section: devel
Architecture: all
Depends: ${misc:Depends},
 debhelper (>= 4.1.13),
 dictionaries-common (>= 1.22.3)
Description: Developer tools and Policy for spelling dictionary tools
 Full text of the Debian Spelling Dictionaries and Tools Policy and
 some debhelper like helpers.
 .
 Only of interest for developers maintaining wordlists or dictionaries
 for ispell, aspell or myspell/hunspell.

Attachment: signature.asc
Description: Digital signature


Reply to: