This is the last call for comments for the review of debconf templates for lirc. The reviewed templates will be sent on Wednesday, September 19, 2007 to the package maintainer as a bug report and a mail will be sent to this list with "[BTS]" as a subject tag. --
Template: lirc-modules-source/drivers Type: multiselect Choices: atiusb, bt829, cmdir, gpio, i2c, igorplugusb, imon, it87, mceusb, mceusb2, parallel, sasem, serial, sir, streamzap Default: i2c, gpio _Description: Drivers to build: atiusb: ATI/NVidia/X10 I & II RF Remote bt829: Tekram M230 Mach64 cmdir: COMMANDIR USB Transceiver gpio: TV cards from FlyVideo98, Avermedia, MiRO and many others i2c: TV cards from Hauppauge and PixelView igorplugusb: Igor Cesko's USB IR Receiver imon: Soundgraph iMON MultiMedian IR/VFD it87: ITE IT8705/12 CIR ports (ECS K7S5A, Asus DigiMatrix...) mceusb: Windows Media Center Remotes (old version, MicroSoft USB ID) mceusb2: Windows Media Center Remotes (new version, Philips et al.) parallel: Home-brew parallel-port receiver sasem: Dign HV5 HTPC IR/VFD Module serial: Home-brew serial-port driver sir: Serial InfraRed (IRDA) streamzap: Streamzap PC Remote Template: lirc-modules-source/use_lirc_hints Type: boolean Default: true _Description: Try to automatically select hardware support options? Your previous answers can be used as a basis for guessing the list of kernel modules that should be built, along with their parameters. . Please choose whether this should happen. Template: lirc-modules-source/not_needed Type: note _Description: Additional kernel modules not needed Unless you want to build LIRC kernel modules for another system, this package is useless on this system. Template: lirc-modules-source/what_next Type: note #flag:translate!:4 _Description: Binary modules package build instructions For instructions on how to build the binary modules package, please read the /usr/share/doc/lirc-modules-source/README.Debian file. . Quick walkthrough: . cd /usr/src/ tar -xzf lirc-modules.tar.gz cd modules/lirc debian/rules binary-modules KSRC=/path/of/my/kernel/source/ dpkg -i ../../irc-modules-*.deb Template: lirc-modules-source/it87_type Type: select #flag:translate:1 __Choices: Standard, DigiMatrix Default: Standard _Description: Type of ITE8705/12 CIR port to support: Please choose the supported ITE8705/12 CIR port chip: . Standard: Standard setup chip; DigiMatrix: Setup for Asus DigiMatrix onboard chip. Template: lirc-modules-source/serial_type Type: select #flag:translate:3 __Choices: ANIMAX, IRDEO, Other Default: Other _Description: Serial device to support: Please choose the supported serial device type: . ANIMAX: Anir Multimedia Magic; IRDEO: IRdeo; Other: Any other supported device. Template: lirc-modules-source/serial_transmitter Type: boolean Default: true _Description: Is the serial IR device a transmitter? Template: lirc-modules-source/serial_softcarrier Type: boolean Default: false _Description: Should the carrier signal be generated by software? Template: lirc-modules-source/serial_port Type: string Default: 0x2f8 _Description: IR serial device I/O port: Template: lirc-modules-source/serial_irq Type: string Default: 3 _Description: IR serial device IRQ: Template: lirc-modules-source/sir_type Type: select #flag:translate:3 __Choices: ACTISYS_ACT200L, TEKRAM, Other Default: Other _Description: Type of supported SIR device: Please choose the supported SIR device type: . ACTISYS_ACT200L: Actisys Act200L dongle; TEKRAM: Tekram Irmate 210 (16x50 UART compatible serial port); Other: Any other supported device. Template: lirc-modules-source/sir_port Type: string Default: 0x2f8 _Description: SIR device I/O port: Template: lirc-modules-source/sir_irq Type: string Default: 3 _Description: SIR device IRQ: Template: lirc-modules-source/parallel_port Type: string Default: 0x378 _Description: Parallel IR device I/O port: Template: lirc-modules-source/parallel_irq Type: string Default: 7 _Description: Parallel IR device IRQ: Template: lirc-modules-source/parallel_timer Type: string Default: 65536 _Description: Parallel IR device timer: Template: lirc-modules-source/do-build Type: boolean Default: false _Description: Automatically build the modules? New LIRC kernel modules can be built and installed if the source and build environment for the current kernel are present locally. . Even if you choose this option, you should build and install a binary 'kernel modules' package so that the package manager can keep track of the files. Template: lirc-modules-source/kernel-source Type: string Default: /usr/src/linux/ _Description: Kernel source location: Please enter the location of the kernel source tree, to build the lirc kernel modules. Template: lirc-modules-source/kernel-source-not-found Type: error _Description: ${ksrc}: invalid kernel source tree
Template: lirc/install_devices Type: boolean Default: true _Description: Create LIRC device nodes if they are not there? LIRC needs the /dev/lirc, /dev/lircd and /dev/lircm files in /dev. . Template: lirc/reconfigure Type: boolean Default: false _Description: Do you want to reconfigure LIRC? LIRC is already configured, reconfiguring it may overwrite the existing configuration in /etc/lirc/hardware.conf. . However, comments, LIRC_ARGS and other unknown code will be preserved. Template: lirc/take_care_of_old_config Type: note _Description: Old configuration files found Previous versions of this package didn't include any configuration file and expected users to create their own /etc/lircd.conf and /etc/lircmd.conf. . The new location for these files is /etc/lirc/. . File locations will be corrected but you should check that none of LIRC configuration files are left directly under /etc/. Template: lirc/driver Type: string Description: Driver name for lircd: for internal use only Template: lirc/modules Type: string Description: Needed kernel modules for LIRC to work: for internal use only Template: lirc/device Type: string Description: Device node for lircd: for internal use only Template: lirc/lircd_conf Type: string Description: Recommended configuration file for lircd: for internal use only Template: lirc/lircmd_conf Type: string Description: Recommended configuration file for lircmd: for internal use only Template: lirc/port Type: string Description: Hint for lirc-modules-source: for internal use only Template: lirc/irq Type: string Description: Hint for lirc-modules-source: for internal use only Template: lirc/timer Type: string Description: Hint for lirc-modules-source: for internal use only Template: lirc/cflags Type: string Description: Hint for lirc-modules-source: for internal use only Template: lirc/should-use-IntelliMouse Type: note _Description: IntelliMouse protocol preferred over IMPS/2 You are currently using lircmd with the IMPS/2 protocol. This is not compatible with the method lircmd uses to simulate a mouse, so IntelliMouse support has been added and is now the preferred protocol. . You should update /etc/lirc/lircmd.conf and the configuration of any program which uses lircmd as a mouse to use the IntelliMouse protocol instead. . NOTE: gpm will refuse to use lircmd as a mouse with IMPS/2 protocol. Template: lirc/remove_var-log-lircd Type: boolean Default: true _Description: Delete /var/log/lircd? LIRC now uses syslog as a logging mechanism, so /var/log/lircd is no longer relevant.
Source: lirc Section: utils Priority: extra Maintainer: lirc Maintainer Team <pkg-lirc-maint@lists.alioth.debian.org> Build-Depends: debhelper (>= 5), libusb-dev [!hurd-i386], libasound2-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libice-dev, libsm-dev, libx11-dev, libsvga1-dev [i386 amd64], libirman-dev, autotools-dev, devscripts, dpatch, libxt-dev, po-debconf Standards-Version: 3.7.2 Uploaders: Hector Garcia <hector@debian.org>, Julien Danjou <acid@debian.org>, Aurelien Jarno <aurel32@debian.org>, Amaya Rodrigo Sastre <amaya@debian.org>, Loic Minier <lool@dooz.org> Package: lirc Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Pre-Depends: dialog Suggests: lirc-modules-source, lirc-x, lirc-svga Description: infra-red remote control support for Linux LIRC stands for 'Linux Infra-red Remote Control'. . This package provides the daemons and some utilities to support infra-red remote controls under Linux. Package: lirc-x Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, lirc (= ${binary:Version}) Replaces: lirc (<< 0.6.4-8) Recommends: xfonts-75dpi Description: infra-red remote control support for Linux - X utilities LIRC stands for 'Linux Infra-red Remote Control'. . This package provides X utilities for LIRC: irxevent: allows controlling X applications with a remote control; xmode2 : shows the IR waveform of the remote controller without an oscilloscope. Unneeded for TV cards or the Irman. Package: lirc-svga Architecture: amd64 i386 Depends: ${shlibs:Depends}, ${misc:Depends}, lirc (= ${binary:Version}) Replaces: lirc (<< 0.6.4-8) Description: infra-red remote control support for Linux - SVGAlib utilities LIRC stands for 'Linux Infra-red Remote Control'. . This package provides SVGAlib utilities for LIRC: smode2: shows the IR waveform of the remote controller without an oscilloscope. Unneeded for TV cards or the Irman. Package: lirc-modules-source Architecture: all Depends: ${misc:Depends}, debianutils (>= 1.7), debhelper (>= 4), ucf Recommends: make, dpkg-dev (>= 1.13), gcc | c-compiler, kernel-package Suggests: kernel-source Conflicts: lirc (<<0.6.3-1) Description: infra-red remote control support for Linux - kernel modules LIRC stands for 'Linux Infra-red Remote Control'. . This package provides the source for the kernel modules to support infra-red remote controls under Linux. . The kernel sources must be installed to compile these modules. Package: liblircclient-dev Architecture: any Section: libdevel Depends: ${misc:Depends}, liblircclient0 (= ${binary:Version}), libc6-dev Description: infra-red remote control support for Linux - client library development files LIRC stands for 'Linux Infra-red Remote Control'. . This package contains the static library and headers for the LIRC client library. Package: liblircclient0 Priority: optional Architecture: any Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: lirc Description: infra-red remote control support for Linux - client library LIRC stands for 'Linux Infra-red Remote Control'. . This package provides a library with functions to support remote controls via LIRC in programs such as xawtv.
Attachment:
signature.asc
Description: Digital signature