[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[RFR] po://release-notes/nl/upgrading.po



Dag iedereen, 


In de git-opslagplaats release-notes werd de vertaling van
nl/upgrading.po bijgewerkt.
In bijlage de bijgewerkte vertaling en een diff-bestand met de wijzigingen
tegenover de vorige versie.

-- 
Met vriendelijke groet,
Frans Spiesschaert
--
Vrije (openbron)software uitgelegd in 3 minuten:
https://media.fsfe.org/w/xs29yhLxSP1uKLYkSeoKKp

diff --git a/nl/upgrading.po b/nl/upgrading.po
index 3fabfc34..75994cc5 100644
--- a/nl/upgrading.po
+++ b/nl/upgrading.po
@@ -1,13 +1,13 @@
 # Dutch translation of the Debian release notes.
 # Copyright (C) 2012 The Debian Project.
 # This file is distributed under the same license as the Debian release notes.
-# Frans Spiesschaert <Frans.Spiesschaert@yucom.be>, 2017, 2019, 2021.
+# Frans Spiesschaert <Frans.Spiesschaert@yucom.be>, 2017, 2019, 2021-2022.
 #
 msgid ""
 msgstr ""
 "Project-Id-Version: release-notes/upgrading\n"
-"POT-Creation-Date: 2021-08-14 23:01+0200\n"
-"PO-Revision-Date: 2021-08-15 22:27+0200\n"
+"POT-Creation-Date: 2022-12-19 18:04+0100\n"
+"PO-Revision-Date: 2022-12-19 21:31+0100\n"
 "Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
 "Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
 "Language: nl\n"
@@ -461,22 +461,42 @@ msgstr ""
 #. type: Content of: <chapter><section><section><section><para>
 #: en/upgrading.dbk:206
 msgid ""
+"Another approach is to enable the systemd <quote>early debug shell</quote> "
+"via the <literal>debug-shell.service</literal>.  On the next boot this "
+"service opens a root login shell on tty9 very early in the boot process.  It "
+"can be enabled with the kernel boot parameter <literal>systemd.debug-"
+"shell=1</literal>, or made persistent with <command>systemctl enable debug-"
+"shell</command> (in which case it should be disabled again when debugging is "
+"completed)."
+msgstr ""
+"Een andere aanpak is de <quote>vroegtijdige debug-shell</quote> van systemd "
+"inschakelen via de <literal>debug-shell.service</literal>. Wanneer dan de "
+"volgende keer opgestart wordt, wordt heel vroeg in het opstartproces een "
+"login-shell voor root geopend op tty9. Dit kan ingeschakeld worden met de "
+"kernel-opstartparameter <literal>systemd.debug-shell=1</literal>, of "
+"blijvend gemaakt worden met <command>systemctl enable debug-shell</command> "
+"(in dat geval moet het weer worden uitgeschakeld wanneer de foutopsporing is "
+"voltooid)."
+#. type: Content of: <chapter><section><section><section><para>
+#: en/upgrading.dbk:214
+msgid ""
 "More information on debugging a broken boot under systemd can be found in "
 "the <ulink url=\"https://freedesktop.org/wiki/Software/systemd/Debugging/\";> "
-"Diagnosing Boot Problems</ulink> article."
+"Freedesktop.org Diagnosing Boot Problems</ulink> article."
 msgstr ""
 "Meer informatie over het onderzoeken en repareren van een defect "
-"opstartproces onder systemd is te vinden in het artikel <ulink url=\"https://";
-"freedesktop.org/wiki/Software/systemd/Debugging/\"> Diagnosing Boot "
-"Problems</ulink>."
+"opstartproces onder systemd is te vinden in het artikel van Freedesktop.org "
+"over <ulink url=\"https://freedesktop.org/wiki/Software/systemd/Debugging/";
+"\"> Diagnosing Boot Problems</ulink>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:215
+#: en/upgrading.dbk:223
 msgid "Prepare a safe environment for the upgrade"
 msgstr "Maak een veilige omgeving klaar voor de opwaardering"
 
 #. type: Content of: <chapter><section><section><important><para>
-#: en/upgrading.dbk:218
+#: en/upgrading.dbk:226
 msgid ""
 "If you are using some VPN services (such as <systemitem role=\"package"
 "\">tinc</systemitem>) consider that they might not be available throughout "
@@ -488,7 +508,7 @@ msgstr ""
 "linkend=\"services-downtime\"/>."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:225
+#: en/upgrading.dbk:233
 msgid ""
 "In order to gain extra safety margin when upgrading remotely, we suggest "
 "that you run upgrade processes in the virtual console provided by the "
@@ -504,7 +524,7 @@ msgstr ""
 "externe verbinding tijdelijk faalt."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:232
+#: en/upgrading.dbk:240
 msgid ""
 "Users of the watchdog daemon provided by the <systemitem role=\"package"
 "\">micro-evtd</systemitem> package should stop the daemon and disable the "
@@ -517,7 +537,7 @@ msgstr ""
 "ongepaste herstart middenin de opwaardering te vermijden:"
 
 #. type: Content of: <chapter><section><section><para><screen>
-#: en/upgrading.dbk:237
+#: en/upgrading.dbk:245
 #, no-wrap
 msgid ""
 "# service micro-evtd stop\n"
@@ -529,12 +549,12 @@ msgstr ""
 "      "
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:247
+#: en/upgrading.dbk:255
 msgid "Start from <quote>pure</quote> Debian"
 msgstr "Beginnen vanuit <quote>zuiver</quote> Debian"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:249
+#: en/upgrading.dbk:257
 msgid ""
 "The upgrade process described in this chapter has been designed for "
 "<quote>pure</quote> Debian stable systems. APT controls what is installed on "
@@ -553,7 +573,7 @@ msgstr ""
 "verloopt."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:258
+#: en/upgrading.dbk:266
 msgid ""
 "The main configuration file that APT uses to decide what sources it should "
 "download packages from is <filename>/etc/apt/sources.list</filename>, but it "
@@ -571,22 +591,21 @@ msgstr ""
 "pakketbronbestanden, moet u ervoor zorgen dat deze consistent blijven."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:269
+#: en/upgrading.dbk:277
 msgid "Upgrade to Debian &oldrelease; (&oldreleasename;)"
 msgstr "Opwaarderen naar Debian &oldrelease; (&oldreleasename;)"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:271
+#: en/upgrading.dbk:279
 msgid ""
-"Direct upgrades from Debian releases older than &oldrelease; "
-"(&oldreleasename;) are not supported.  Display your Debian version with:"
+"Only upgrades from Debian &oldrelease; (&oldreleasename;) are supported.  "
+"Display your Debian version with:"
 msgstr ""
-"Rechtstreekse opwaarderingen vanaf Debian-releases ouder dan &oldrelease; "
-"(&oldreleasename;) worden niet ondersteund. U kunt uw Debian-versie "
-"weergeven met:"
+"Enkel opwaarderingen vanaf Debian &oldrelease; (&oldreleasename;) worden "
+"ondersteund. U kunt uw Debian-versie weergeven met:"
 
 #. type: Content of: <chapter><section><section><para><screen>
-#: en/upgrading.dbk:275
+#: en/upgrading.dbk:282
 #, no-wrap
 msgid ""
 "$ cat /etc/debian_version\n"
@@ -596,23 +615,100 @@ msgstr ""
 "      "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:277
+#: en/upgrading.dbk:284
 msgid ""
 "Please follow the instructions in the <ulink url=\"https://www.debian.org/";
 "releases/&oldreleasename;/releasenotes\">Release Notes for &debian; "
-"&oldrelease;</ulink> to upgrade to &debian; &oldrelease; first."
+"&oldrelease;</ulink> to upgrade to &debian; &oldrelease; first if needed."
 msgstr ""
 "Volg de instructies uit de <ulink url=\"https://www.debian.org/releases/";
 "&oldreleasename;/releasenotes\">Notities bij de uitgave van &debian; "
 "&oldrelease;</ulink> om eerst naar &debian; &oldrelease; op te waarderen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:286
+#: en/upgrading.dbk:292
+msgid "Debian Backports"
+msgstr "Debian Backports"
+#. type: Content of: <chapter><section><section><para>
+#: en/upgrading.dbk:294
+msgid ""
+"<ulink url=\"&url-debian-backports;\">Debian Backports</ulink> allows users "
+"of Debian stable to run more up-to-date versions of packages (with some "
+"tradeoffs in testing and security support).  The Debian Backports Team "
+"maintains a subset of packages from the next Debian release, adjusted and "
+"recompiled for usage on the current Debian stable release."
+msgstr ""
+"<ulink url=\"&url-debian-backports;\">Debian Backports</ulink> stelt "
+"gebruikers van de stabiele uitgave van Debian in staat om actuelere versies "
+"van pakketten te gebruiken (met enkele nadelen op het gebied van testen en "
+"beveiligingsondersteuning). Het Debian Backports Team onderhoudt een "
+"deelverzameling pakketten van de eerstvolgende uitgave van Debian, aangepast "
+"en opnieuw gecompileerd om gebruikt te kunnen worden met de huidige stabiele "
+"uitgave van Debian."
+#. type: Content of: <chapter><section><section><para>
+#: en/upgrading.dbk:302
+msgid ""
+"Packages from &oldreleasename;-backports have version numbers lower than the "
+"version in &releasename;, so they should upgrade normally to &releasename; "
+"in the same way as <quote>pure</quote> &oldreleasename; packages during the "
+"distribution upgrade.  While there are no known potential issues, the "
+"upgrade paths from backports are less tested, and correspondingly incur more "
+"risk."
+msgstr ""
+"Pakketten van &oldreleasename;-backports hebben lagere versienummers dan de "
+"versie in &releasename;, zodat ze tijdens de opwaardering van de distributie "
+"gewoon opgewaardeerd kunnen worden naar &releasename;, op dezelfde wijze als "
+"<quote>zuivere</quote> &oldreleasename; pakketten. Hoewel er geen potentiële "
+"problemen bekend zijn, worden opwaarderingstrajecten vanaf backports minder "
+"getest en lopen deze dienovereenkomstig een groter risico."
+#. type: Content of: <chapter><section><section><caution><para>
+#: en/upgrading.dbk:312
+msgid ""
+"While regular Debian Backports are supported, there is no clean upgrade path "
+"from <ulink url=\"&url-debian-backports;Instructions/#index4h2\">sloppy</"
+"ulink> backports (which use APT source-list entries referencing "
+"&oldreleasename;-backports-sloppy)."
+msgstr ""
+"Terwijl gewone Debian Backports ondersteund worden, bestaat er geen schoon "
+"opwaarderingstraject voor <ulink url=\"&url-debian-backports;Instructions/"
+"#index4h2\">sloppy</ulink> backports (waarvoor in sources-list van APT "
+"vermeldingen gebruikt worden die verwijzen naar &oldreleasename;-backports-"
+"sloppy)."
+#. type: Content of: <chapter><section><section><para>
+#: en/upgrading.dbk:320
+msgid ""
+"As with <xref linkend=\"unofficial-sources\"/>, users are advised to remove "
+"&oldreleasename;-backports entries from their APT source-list files before "
+"the upgrade.  After it is completed, they may consider adding <ulink url="
+"\"&url-debian-backports;Instructions/\">&releasename;-backports</ulink>."
+msgstr ""
+"Zoals dit het geval is voor <xref linkend=\"unofficial-sources\"/>, wordt "
+"gebruikers de raad gegeven om voor de opwaardering vermeldingen van "
+"&oldreleasename;-backports te verwijderen uit hun APT source-list-bestanden. "
+"Nadat de opwaardering voltooid is, kunnen ze in overweging nemen om <ulink "
+"url=\"&url-debian-backports;Instructions/\">&releasename;-backports</ulink> "
+"toe te voegen."
+#. type: Content of: <chapter><section><section><para>
+#: en/upgrading.dbk:327
+msgid ""
+"For more information, consult the <ulink url=\"&url-wiki;Backports"
+"\">Backports Wiki page</ulink>."
+msgstr ""
+"Raadpleeg voor bijkomende informatie de <ulink url=\"&url-wiki;Backports"
+"\">Backports Wiki-pagina</ulink>."
+#. type: Content of: <chapter><section><section><title>
+#: en/upgrading.dbk:333
 msgid "Remove non-Debian packages"
 msgstr "Niet-Debianpakketten verwijderen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:288
+#: en/upgrading.dbk:335
 msgid ""
 "Below there are two methods for finding installed packages that did not come "
 "from Debian, using either <command>aptitude</command> or <command>apt-"
@@ -628,7 +724,7 @@ msgstr ""
 "werden maar nu niet meer, zoals oude kernelpakketten)."
 
 #. type: Content of: <chapter><section><section><para><screen>
-#: en/upgrading.dbk:294
+#: en/upgrading.dbk:341
 #, no-wrap
 msgid ""
 "$ aptitude search '?narrow(?installed, ?not(?origin(Debian)))'\n"
@@ -640,12 +736,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:301
+#: en/upgrading.dbk:348
 msgid "Upgrade to latest point release"
 msgstr "Naar de laatste tussenrelease opwaarderen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:303
+#: en/upgrading.dbk:350
 msgid ""
 "This procedure assumes your system has been updated to the latest point "
 "release of &oldreleasename;.  If you have not done this or are unsure, "
@@ -657,12 +753,12 @@ msgstr ""
 "<xref linkend=\"old-upgrade\"/>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:310
+#: en/upgrading.dbk:357
 msgid "Prepare the package database"
 msgstr "De pakketdatabank voorbereiden"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:312
+#: en/upgrading.dbk:359
 msgid ""
 "You should make sure the package database is ready before proceeding with "
 "the upgrade. If you are a user of another package manager like <systemitem "
@@ -687,12 +783,12 @@ msgstr ""
 "sources\"/>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:326
+#: en/upgrading.dbk:373
 msgid "Remove obsolete packages"
 msgstr "Verouderde pakketten verwijderen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:328
+#: en/upgrading.dbk:375
 msgid ""
 "It is a good idea to <link linkend=\"obsolete\">remove obsolete packages</"
 "link> from your system before upgrading.  They may introduce complications "
@@ -705,12 +801,12 @@ msgstr ""
 "veiligheidsrisico's inhouden omdat ze niet langer onderhouden worden."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:336
+#: en/upgrading.dbk:383
 msgid "Clean up leftover configuration files"
 msgstr "Overgebleven configuratiebestanden opruimen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:338
+#: en/upgrading.dbk:385
 msgid ""
 "A previous upgrade may have left unused copies of configuration files; <link "
 "linkend=\"configuration-changes\">old versions</link> of configuration "
@@ -726,7 +822,7 @@ msgstr ""
 "bestanden met:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:345
+#: en/upgrading.dbk:392
 #, no-wrap
 msgid ""
 "# find /etc -name '*.dpkg-*' -o -name '*.ucf-*' -o -name '*.merge-error'\n"
@@ -736,30 +832,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:350
-msgid "The security section"
-msgstr "De afdeling beveiliging"
-
-#. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:352
-msgid ""
-"For APT source lines referencing the security archive, the format has "
-"changed slightly along with the release name, going from <literal>buster/"
-"updates</literal> to <literal>bullseye-security</literal>; see <xref linkend="
-"\"security-archive\"/>."
-msgstr ""
-"Voor APT-bronregels die verwijzen naar het beveiligingsarchief, is de opmaak "
-"enigszins gewijzigd samen met de releasenaam, gaande van <literal>buster/"
-"updates</literal> naar <literal>bullseye-security</literal>; zie <xref "
-"linkend=\"security-archive\"/>."
-
-#. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:361
+#: en/upgrading.dbk:397
 msgid "The proposed-updates section"
 msgstr "De archiefafdeling proposed-updates"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:363
+#: en/upgrading.dbk:399
 msgid ""
 "If you have listed the <literal>proposed-updates</literal> section in your "
 "APT source-list files, you should remove it before attempting to upgrade "
@@ -771,12 +849,12 @@ msgstr ""
 "voorzorgsmaatregel om de kans op conflicten te verkleinen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:371
+#: en/upgrading.dbk:407
 msgid "Unofficial sources"
 msgstr "Niet-officiële pakketbronnen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:373
+#: en/upgrading.dbk:409
 msgid ""
 "If you have any non-Debian packages on your system, you should be aware that "
 "these may be removed during the upgrade because of conflicting "
@@ -795,7 +873,7 @@ msgstr ""
 "aanpast."
 
 #. type: Content of: <chapter><section><section><para><footnote><para>
-#: en/upgrading.dbk:385
+#: en/upgrading.dbk:421
 msgid ""
 "Debian's package management system normally does not allow a package to "
 "remove or replace a file owned by another package unless it has been defined "
@@ -806,7 +884,7 @@ msgstr ""
 "het bedoeld is om dat pakket te vervangen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:382
+#: en/upgrading.dbk:418
 msgid ""
 "Some users may have <emphasis>unofficial</emphasis> backported <quote>newer</"
 "quote> versions of packages that <emphasis>are</emphasis> in Debian "
@@ -827,12 +905,12 @@ msgstr ""
 "bestandsconflicten kunt omgaan mochten die zich manifesteren."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:395
+#: en/upgrading.dbk:431
 msgid "Disabling APT pinning"
 msgstr "APT-verankering (pinning) uitschakelen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:397
+#: en/upgrading.dbk:433
 msgid ""
 "If you have configured APT to install certain packages from a distribution "
 "other than stable (e.g.  from testing), you may have to change your APT "
@@ -852,12 +930,12 @@ msgstr ""
 "apt_preferences.5.en.html\">apt_preferences(5)</ulink>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:407
+#: en/upgrading.dbk:443
 msgid "Check package status"
 msgstr "De toestand van pakketten controleren"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:409
+#: en/upgrading.dbk:445
 msgid ""
 "Regardless of the method used for upgrading, it is recommended that you "
 "check the status of all packages first, and verify that all packages are in "
@@ -873,7 +951,7 @@ msgstr ""
 "een foutstatus."
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:415
+#: en/upgrading.dbk:451
 #, no-wrap
 msgid ""
 "# dpkg --audit\n"
@@ -883,7 +961,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:418
+#: en/upgrading.dbk:454
 msgid ""
 "You could also inspect the state of all packages on your system using "
 "<command>aptitude</command> or with commands such as"
@@ -892,7 +970,7 @@ msgstr ""
 "<command>aptitude</command> of met commando's zoals"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:423
+#: en/upgrading.dbk:459
 #, no-wrap
 msgid ""
 "# dpkg -l | pager\n"
@@ -902,12 +980,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:426
+#: en/upgrading.dbk:462
 msgid "or"
 msgstr "of"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:429
+#: en/upgrading.dbk:465
 #, no-wrap
 msgid ""
 "# dpkg --get-selections \"*\" &gt; ~/curr-pkgs.txt\n"
@@ -917,7 +995,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:432
+#: en/upgrading.dbk:468
 msgid ""
 "It is desirable to remove any holds before upgrading.  If any package that "
 "is essential for the upgrade is on hold, the upgrade will fail."
@@ -928,7 +1006,7 @@ msgstr ""
 "handhaven gemarkeerd staat, zal de opwaardering mislukken."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:436
+#: en/upgrading.dbk:472
 msgid ""
 "Note that <command>aptitude</command> uses a different method for "
 "registering packages that are on hold than <command>apt</command> and "
@@ -942,7 +1020,7 @@ msgstr ""
 "met"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:442
+#: en/upgrading.dbk:478
 #, no-wrap
 msgid ""
 "# aptitude search \"~ahold\" \n"
@@ -952,7 +1030,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:445
+#: en/upgrading.dbk:481
 msgid ""
 "If you want to check which packages you had on hold for <command>apt</"
 "command>, you should use"
@@ -961,7 +1039,7 @@ msgstr ""
 "ingesteld staan, dan moet u het volgende commando gebruiken"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:449
+#: en/upgrading.dbk:485
 #, no-wrap
 msgid ""
 "# dpkg --get-selections | grep 'hold$'\n"
@@ -971,7 +1049,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:452
+#: en/upgrading.dbk:488
 msgid ""
 "If you changed and recompiled a package locally, and didn't rename it or put "
 "an epoch in the version, you must put it on hold to prevent it from being "
@@ -983,7 +1061,7 @@ msgstr ""
 "wordt."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:457
+#: en/upgrading.dbk:493
 msgid ""
 "The <quote>hold</quote> package state for <command>apt</command> can be "
 "changed using:"
@@ -992,7 +1070,7 @@ msgstr ""
 "handhaven) van een pakket wijzigen met:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:460
+#: en/upgrading.dbk:496
 #, no-wrap
 msgid ""
 "# echo <replaceable>package_name</replaceable> hold | dpkg --set-selections\n"
@@ -1002,7 +1080,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:463
+#: en/upgrading.dbk:499
 msgid ""
 "Replace <literal>hold</literal> with <literal>install</literal> to unset the "
 "<quote>hold</quote> state."
@@ -1011,7 +1089,7 @@ msgstr ""
 "<quote>hold</quote>-status (de 'te handhaven'-status) ongedaan te maken."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:467
+#: en/upgrading.dbk:503
 msgid ""
 "If there is anything you need to fix, it is best to make sure your APT "
 "source-list files still refer to &oldreleasename; as explained in <xref "
@@ -1022,12 +1100,12 @@ msgstr ""
 "zoals uitgelegd werd in <xref linkend=\"old-sources\"/>."
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:476
+#: en/upgrading.dbk:512
 msgid "Preparing APT source-list files"
 msgstr "Pakketbronbestanden voor APT klaarmaken"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:478
+#: en/upgrading.dbk:514
 msgid ""
 "Before starting the upgrade you must reconfigure APT source-list files "
 "(<filename>/etc/apt/sources.list</filename> and files under <filename>/etc/"
@@ -1042,7 +1120,7 @@ msgstr ""
 "<literal>&oldreleasename;</literal> te verwijderen."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:485
+#: en/upgrading.dbk:521
 msgid ""
 "APT will consider all packages that can be found via any configured archive, "
 "and install the package with the highest version number, giving priority to "
@@ -1058,7 +1136,7 @@ msgstr ""
 "dan <acronym>cd</acronym>'s en vervolgens externe spiegelservers."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:493
+#: en/upgrading.dbk:529
 msgid ""
 "A release can often be referred to both by its codename (e.g.  "
 "<literal>&oldreleasename;</literal>, <literal>&releasename;</literal>) and "
@@ -1083,7 +1161,7 @@ msgstr ""
 "voor een massa pakketten updates beschikbaar gekomen zijn."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:505
+#: en/upgrading.dbk:541
 msgid ""
 "Debian provides two announcement mailing lists to help you stay up to date "
 "on relevant information related to Debian releases:"
@@ -1093,7 +1171,7 @@ msgstr ""
 "Debian:"
 
 #. type: Content of: <chapter><section><para><itemizedlist><listitem><para>
-#: en/upgrading.dbk:510
+#: en/upgrading.dbk:546
 msgid ""
 "By <ulink url=\"https://lists.debian.org/debian-announce/\";> subscribing to "
 "the Debian announcement mailing list</ulink>, you will receive a "
@@ -1108,7 +1186,7 @@ msgstr ""
 "overgaat naar <literal>stable</literal>."
 
 #. type: Content of: <chapter><section><para><itemizedlist><listitem><para>
-#: en/upgrading.dbk:520
+#: en/upgrading.dbk:556
 msgid ""
 "By <ulink url=\"https://lists.debian.org/debian-security-announce/\";> "
 "subscribing to the Debian security announcement mailing list</ulink>, you "
@@ -1121,12 +1199,12 @@ msgstr ""
 "publiceert."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:530
+#: en/upgrading.dbk:566
 msgid "Adding APT Internet sources"
 msgstr "Op het internet aanwezige pakketbronnen voor APT toevoegen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:532
+#: en/upgrading.dbk:568
 msgid ""
 "On new installations the default is for APT to be set up to use the &debian; "
 "APT CDN service, which should ensure that packages are automatically "
@@ -1147,7 +1225,7 @@ msgstr ""
 "gebruik van de CDN-dienst in uw configuratie van APT."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:541
+#: en/upgrading.dbk:577
 msgid ""
 "To make use of the CDN service, add a line like this to your APT source "
 "configuration (assuming you are using <literal>main</literal> and "
@@ -1158,13 +1236,13 @@ msgstr ""
 "maakt van <literal>main</literal> en <literal>contrib</literal>):"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:545
+#: en/upgrading.dbk:581
 #, no-wrap
 msgid "deb http://deb.debian.org/debian &releasename; main contrib"
 msgstr "deb http://deb.debian.org/debian &releasename; main contrib"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:547
+#: en/upgrading.dbk:583
 msgid ""
 "After adding your new sources, disable the previously existing "
 "<quote><literal>deb</literal></quote> lines by placing a hash sign "
@@ -1175,7 +1253,7 @@ msgstr ""
 "teken (<literal>#</literal>) voor te plaatsen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:552
+#: en/upgrading.dbk:588
 msgid ""
 "However, if you get better results using a specific mirror that is close to "
 "you in network terms, this option is still available."
@@ -1185,7 +1263,7 @@ msgstr ""
 "steeds die mogelijkheid."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:556
+#: en/upgrading.dbk:592
 msgid ""
 "Debian mirror addresses can be found at <ulink url=\"&url-debian-mirrors;"
 "\"></ulink> (look at the <quote>list of Debian mirrors</quote> section)."
@@ -1195,7 +1273,7 @@ msgstr ""
 "van Debian spiegelservers</quote>)."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:561
+#: en/upgrading.dbk:597
 msgid ""
 "For example, suppose your closest Debian mirror is <literal>&url-debian-"
 "mirror-eg;</literal>.  If you inspect that mirror with a web browser, you "
@@ -1207,7 +1285,7 @@ msgstr ""
 "volgende manier georganiseerd zijn:"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:567
+#: en/upgrading.dbk:603
 #, no-wrap
 msgid ""
 "&url-debian-mirror-eg;/debian/dists/&releasename;/main/binary-&architecture;/...\n"
@@ -1219,7 +1297,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:571
+#: en/upgrading.dbk:607
 msgid ""
 "To configure APT to use a given mirror, add a line like this (again, "
 "assuming you are using <literal>main</literal> and <literal>contrib</"
@@ -1230,13 +1308,13 @@ msgstr ""
 "maakt van <literal>main</literal> en <literal>contrib</literal>):"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:575
+#: en/upgrading.dbk:611
 #, no-wrap
 msgid "deb &url-debian-mirror-eg;/debian &releasename; main contrib"
 msgstr "deb &url-debian-mirror-eg;/debian &releasename; main contrib"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:577 en/upgrading.dbk:607
+#: en/upgrading.dbk:613 en/upgrading.dbk:643
 msgid ""
 "Note that the <quote><literal>dists</literal></quote> is added implicitly, "
 "and the arguments after the release name are used to expand the path into "
@@ -1247,7 +1325,7 @@ msgstr ""
 "pad uit te breiden tot meerdere mappen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:581
+#: en/upgrading.dbk:617
 msgid ""
 "Again, after adding your new sources, disable the previously existing "
 "archive entries."
@@ -1256,12 +1334,12 @@ msgstr ""
 "bestaande archiefregels uitschakelen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:587
+#: en/upgrading.dbk:623
 msgid "Adding APT sources for a local mirror"
 msgstr "APT-pakketbronnen van een lokale spiegelserver toevoegen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:589
+#: en/upgrading.dbk:625
 msgid ""
 "Instead of using remote package mirrors, you may wish to modify the APT "
 "source-list files to use a mirror on a local disk (possibly mounted over "
@@ -1273,7 +1351,7 @@ msgstr ""
 "<acronym>NFS</acronym>)."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:594
+#: en/upgrading.dbk:630
 msgid ""
 "For example, your package mirror may be under <filename>/var/local/debian/</"
 "filename>, and have main directories like this:"
@@ -1282,7 +1360,7 @@ msgstr ""
 "debian/</filename> en heeft de volgende hoofdmappen:"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:598
+#: en/upgrading.dbk:634
 #, no-wrap
 msgid ""
 "/var/local/debian/dists/&releasename;/main/binary-&architecture;/...\n"
@@ -1294,7 +1372,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:602
+#: en/upgrading.dbk:638
 msgid ""
 "To use this with <systemitem role=\"package\">apt</systemitem>, add this "
 "line to your <filename>sources.list</filename> file:"
@@ -1304,13 +1382,13 @@ msgstr ""
 "list</filename>:"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:605
+#: en/upgrading.dbk:641
 #, no-wrap
 msgid "deb file:/var/local/debian &releasename; main contrib"
 msgstr "deb file:/var/local/debian &releasename; main contrib"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:611
+#: en/upgrading.dbk:647
 msgid ""
 "After adding your new sources, disable the previously existing archive "
 "entries in the APT source-list files by placing a hash sign (<literal>#</"
@@ -1321,12 +1399,12 @@ msgstr ""
 "teken (<literal>#</literal>) voor te plaatsen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:618
+#: en/upgrading.dbk:654
 msgid "Adding APT sources from optical media"
 msgstr "APT-pakketbronnen van optische media toevoegen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:620
+#: en/upgrading.dbk:656
 msgid ""
 "If you want to use <emphasis>only</emphasis> DVDs (or CDs or Blu-ray Discs), "
 "comment out the existing entries in all the APT source-list files by placing "
@@ -1337,7 +1415,7 @@ msgstr ""
 "deactiveren door er een hash-teken (<literal>#</literal>) voor te plaatsen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:625
+#: en/upgrading.dbk:661
 msgid ""
 "Make sure there is a line in <filename>/etc/fstab</filename> that enables "
 "mounting your CD-ROM drive at the <filename>/media/cdrom</filename> mount "
@@ -1351,7 +1429,7 @@ msgstr ""
 "bevatten zoals deze:"
 
 #. type: Content of: <chapter><section><section><programlisting>
-#: en/upgrading.dbk:632
+#: en/upgrading.dbk:668
 #, no-wrap
 msgid ""
 "/dev/sr0 /media/cdrom auto noauto,ro 0 0\n"
@@ -1361,7 +1439,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:635
+#: en/upgrading.dbk:671
 msgid ""
 "Note that there must be <emphasis>no spaces</emphasis> between the words "
 "<literal>noauto,ro</literal> in the fourth field."
@@ -1370,14 +1448,14 @@ msgstr ""
 "woorden <literal>noauto,ro</literal> in het vierde veld."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:639
+#: en/upgrading.dbk:675
 msgid "To verify it works, insert a CD and try running"
 msgstr ""
 "Om na te gaan of het werkt, kunt u een cd in het station plaatsen en de "
 "volgende commando's uitvoeren:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:642
+#: en/upgrading.dbk:678
 #, no-wrap
 msgid ""
 "# mount /media/cdrom    # this will mount the CD to the mount point\n"
@@ -1391,12 +1469,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:647
+#: en/upgrading.dbk:683
 msgid "Next, run:"
 msgstr "Voer vervolgens het volgende commando uit:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:650
+#: en/upgrading.dbk:686
 #, no-wrap
 msgid ""
 "# apt-cdrom add\n"
@@ -1406,7 +1484,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:653
+#: en/upgrading.dbk:689
 msgid ""
 "for each Debian Binary CD-ROM you have, to add the data about each CD to "
 "APT's database."
@@ -1415,12 +1493,12 @@ msgstr ""
 "over elke cd toe te voegen aan de databank van APT."
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:661
+#: en/upgrading.dbk:697
 msgid "Upgrading packages"
 msgstr "Pakketten opwaarderen"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:663
+#: en/upgrading.dbk:699
 msgid ""
 "The recommended way to upgrade from previous &debian; releases is to use the "
 "package management tool <command>apt</command>."
@@ -1429,7 +1507,7 @@ msgstr ""
 "is het pakketbeheergereedschap <command>apt</command> gebruiken."
 
 #. type: Content of: <chapter><section><note><para>
-#: en/upgrading.dbk:668
+#: en/upgrading.dbk:704
 msgid ""
 "<command>apt</command> is meant for interactive use, and should not be used "
 "in scripts. In scripts one should use <command>apt-get</command>, which has "
@@ -1441,7 +1519,7 @@ msgstr ""
 "verwerking."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:674
+#: en/upgrading.dbk:710
 msgid ""
 "Don't forget to mount all needed partitions (notably the root and <filename>/"
 "usr</filename> partitions) read-write, with a command like:"
@@ -1451,7 +1529,7 @@ msgstr ""
 "lezen en schrijven met een commando zoals:"
 
 #. type: Content of: <chapter><section><screen>
-#: en/upgrading.dbk:678
+#: en/upgrading.dbk:714
 #, no-wrap
 msgid ""
 "# mount -o remount,rw /<replaceable>mountpoint</replaceable>\n"
@@ -1461,7 +1539,7 @@ msgstr ""
 "  "
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:681
+#: en/upgrading.dbk:717
 msgid ""
 "Next you should double-check that the APT source entries (in <filename>/etc/"
 "apt/sources.list</filename> and files under <filename>/etc/apt/sources.list."
@@ -1477,7 +1555,7 @@ msgstr ""
 "pakketbronvermeldingen mogen verwijzen naar &oldreleasename;."
 
 #. type: Content of: <chapter><section><para><note><para>
-#: en/upgrading.dbk:689
+#: en/upgrading.dbk:725
 msgid ""
 "Source lines for a CD-ROM might sometimes refer to <quote><literal>unstable</"
 "literal></quote>; although this may be confusing, you should <emphasis>not</"
@@ -1488,12 +1566,12 @@ msgstr ""
 "zorgt, mag u deze regel <emphasis>niet</emphasis> aanpassen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:697
+#: en/upgrading.dbk:733
 msgid "Recording the session"
 msgstr "De sessie opnemen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:699
+#: en/upgrading.dbk:735
 msgid ""
 "It is strongly recommended that you use the <command>/usr/bin/script</"
 "command> program to record a transcript of the upgrade session.  Then if a "
@@ -1507,7 +1585,7 @@ msgstr ""
 "geven in een bugrapport. Om het opnemen te starten, typt u:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:705
+#: en/upgrading.dbk:741
 #, no-wrap
 msgid ""
 "# script -t 2&gt;~/upgrade-&releasename;<replaceable>step</replaceable>.time -a ~/upgrade-&releasename;<replaceable>step</replaceable>.script\n"
@@ -1517,7 +1595,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:708
+#: en/upgrading.dbk:744
 msgid ""
 "or similar. If you have to rerun the typescript (e.g. if you have to reboot "
 "the system) use different <replaceable>step</replaceable> values to indicate "
@@ -1536,7 +1614,7 @@ msgstr ""
 "van de computer)."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:716
+#: en/upgrading.dbk:752
 msgid ""
 "The typescript will also allow you to review information that has scrolled "
 "off-screen.  If you are at the system's console, just switch to VT2 (using "
@@ -1552,7 +1630,7 @@ msgstr ""
 "&releasename;.script</literal> gebruiken om het bestand in te kijken."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:724
+#: en/upgrading.dbk:760
 msgid ""
 "After you have completed the upgrade, you can stop <command>script</command> "
 "by typing <literal>exit</literal> at the prompt."
@@ -1562,7 +1640,7 @@ msgstr ""
 "te typen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:729
+#: en/upgrading.dbk:765
 msgid ""
 "<command>apt</command> will also log the changed package states in "
 "<filename>/var/log/apt/history.log</filename> and the terminal output in "
@@ -1581,7 +1659,7 @@ msgstr ""
 "aptitude</filename>."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:738
+#: en/upgrading.dbk:774
 msgid ""
 "If you have used the <emphasis>-t</emphasis> switch for <command>script</"
 "command> you can use the <command>scriptreplay</command> program to replay "
@@ -1593,7 +1671,7 @@ msgstr ""
 "spelen:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:743
+#: en/upgrading.dbk:779
 #, no-wrap
 msgid ""
 "# scriptreplay ~/upgrade-&releasename;<replaceable>step</replaceable>.time ~/upgrade-&releasename;<replaceable>step</replaceable>.script\n"
@@ -1603,12 +1681,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:748
+#: en/upgrading.dbk:784
 msgid "Updating the package list"
 msgstr "De pakketlijst bijwerken"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:750
+#: en/upgrading.dbk:786
 msgid ""
 "First the list of available packages for the new release needs to be "
 "fetched.  This is done by executing:"
@@ -1617,7 +1695,7 @@ msgstr ""
 "opgehaald worden. Dit gebeurt met het volgende commando:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:754
+#: en/upgrading.dbk:790
 #, no-wrap
 msgid ""
 "# apt update\n"
@@ -1627,7 +1705,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><note><para>
-#: en/upgrading.dbk:758
+#: en/upgrading.dbk:794
 msgid ""
 "Users of apt-secure may find issues when using <command>aptitude</command> "
 "or <command>apt-get</command>. For apt-get, you can use <command>apt-get "
@@ -1639,12 +1717,12 @@ msgstr ""
 "gebruiken."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:767
+#: en/upgrading.dbk:803
 msgid "Make sure you have sufficient space for the upgrade"
 msgstr "Zorg voor voldoende vrije schijfruimte voor de opwaardering"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:769
+#: en/upgrading.dbk:805
 msgid ""
 "You have to make sure before upgrading your system that you will have "
 "sufficient hard disk space when you start the full system upgrade described "
@@ -1680,7 +1758,7 @@ msgstr ""
 "systeem dat nog moeilijk te repareren valt."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:785
+#: en/upgrading.dbk:821
 msgid ""
 "<command>apt</command> can show you detailed information about the disk "
 "space needed for the installation.  Before executing the upgrade, you can "
@@ -1691,7 +1769,7 @@ msgstr ""
 "start, kunt u daarvan een schatting krijgen met het commando:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:790
+#: en/upgrading.dbk:826
 #, no-wrap
 msgid ""
 "# apt -o APT::Get::Trivial-Only=true full-upgrade\n"
@@ -1709,7 +1787,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><note><para>
-#: en/upgrading.dbk:798
+#: en/upgrading.dbk:834
 msgid ""
 "Running this command at the beginning of the upgrade process may give an "
 "error, for the reasons described in the next sections.  In that case you "
@@ -1725,7 +1803,7 @@ msgstr ""
 "schijfruimte te laten schatten."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:807
+#: en/upgrading.dbk:843
 msgid ""
 "If you do not have enough space for the upgrade, <command>apt</command> will "
 "warn you with a message like this:"
@@ -1734,7 +1812,7 @@ msgstr ""
 "<command>apt</command> u met een melding zoals deze waarschuwen:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:811
+#: en/upgrading.dbk:847
 #, no-wrap
 msgid ""
 "E: You don't have enough free space in /var/cache/apt/archives/.\n"
@@ -1744,14 +1822,14 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:814
+#: en/upgrading.dbk:850
 msgid "In this situation, make sure you free up space beforehand.  You can:"
 msgstr ""
 "Als die situatie zich voordoet, moet u vooraf voldoende vrije ruimte maken. "
 "U kunt:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:820
+#: en/upgrading.dbk:856
 msgid ""
 "Remove packages that have been previously downloaded for installation (at "
 "<filename>/var/cache/apt/archives</filename>).  Cleaning up the package "
@@ -1764,7 +1842,7 @@ msgstr ""
 "alle eerder gedownloade pakketbestanden verwijderd worden."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:828
+#: en/upgrading.dbk:864
 msgid ""
 "Remove forgotten packages.  If you have used <command>aptitude</command> or "
 "<command>apt</command> to manually install packages in &oldreleasename; it "
@@ -1786,7 +1864,7 @@ msgstr ""
 "verwijderen, geeft u het commando:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><screen>
-#: en/upgrading.dbk:838
+#: en/upgrading.dbk:874
 #, no-wrap
 msgid ""
 "# apt autoremove\n"
@@ -1796,7 +1874,7 @@ msgstr ""
 "        "
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:841
+#: en/upgrading.dbk:877
 msgid ""
 "You can also use <command>deborphan</command>, <command>debfoster</command>, "
 "or <command>cruft</command> to find redundant packages.  Do not blindly "
@@ -1816,7 +1894,7 @@ msgstr ""
 "voorstellen, vooraleer ze daadwerkelijk te verwijderen."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:852
+#: en/upgrading.dbk:888
 msgid ""
 "Remove packages that take up too much space and are not currently needed "
 "(you can always reinstall them after the upgrade).  If you have <systemitem "
@@ -1851,7 +1929,7 @@ msgstr ""
 "een handige manier kunt werken."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:872
+#: en/upgrading.dbk:908
 msgid ""
 "Remove translations and localization files from the system if they are not "
 "needed.  You can install the <systemitem role=\"package\">localepurge</"
@@ -1867,7 +1945,7 @@ msgstr ""
 "wordt, beperken."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:882
+#: en/upgrading.dbk:918
 msgid ""
 "Temporarily move to another system, or permanently remove, system logs "
 "residing under <filename>/var/log/</filename>."
@@ -1876,7 +1954,7 @@ msgstr ""
 "tijdelijk naar een ander systeem of verwijder ze definitief."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:889
+#: en/upgrading.dbk:925
 msgid ""
 "Use a temporary <filename>/var/cache/apt/archives</filename>: You can use a "
 "temporary cache directory from another filesystem (<acronym>USB</acronym> "
@@ -1888,7 +1966,7 @@ msgstr ""
 "bestandssysteem dat al in gebruik is, ...)"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><note><para>
-#: en/upgrading.dbk:896
+#: en/upgrading.dbk:932
 msgid ""
 "Do not use an <acronym>NFS</acronym> mount as the network connection could "
 "be interrupted during the upgrade."
@@ -1898,7 +1976,7 @@ msgstr ""
 "worden."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:901
+#: en/upgrading.dbk:937
 msgid ""
 "For example, if you have a <acronym>USB</acronym> drive mounted on "
 "<filename>/media/usbkey</filename>:"
@@ -1907,7 +1985,7 @@ msgstr ""
 "op <filename>/media/usbkey</filename>:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
-#: en/upgrading.dbk:905
+#: en/upgrading.dbk:941
 msgid ""
 "remove the packages that have been previously downloaded for installation:"
 msgstr ""
@@ -1915,7 +1993,7 @@ msgstr ""
 "installatie:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
-#: en/upgrading.dbk:909
+#: en/upgrading.dbk:945
 #, no-wrap
 msgid ""
 "# apt clean\n"
@@ -1925,7 +2003,7 @@ msgstr ""
 "                "
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
-#: en/upgrading.dbk:915
+#: en/upgrading.dbk:951
 msgid ""
 "copy the directory <filename>/var/cache/apt/archives</filename> to the "
 "<acronym>USB</acronym> drive:"
@@ -1934,7 +2012,7 @@ msgstr ""
 "<acronym>USB</acronym>-schijf:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
-#: en/upgrading.dbk:920
+#: en/upgrading.dbk:956
 #, no-wrap
 msgid ""
 "# cp -ax /var/cache/apt/archives /media/usbkey/\n"
@@ -1944,12 +2022,12 @@ msgstr ""
 "                "
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
-#: en/upgrading.dbk:926
+#: en/upgrading.dbk:962
 msgid "mount the temporary cache directory on the current one:"
 msgstr "koppel de tijdelijke cachemap aan op de huidige:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
-#: en/upgrading.dbk:929
+#: en/upgrading.dbk:965
 #, no-wrap
 msgid ""
 "# mount --bind /media/usbkey/archives /var/cache/apt/archives\n"
@@ -1959,7 +2037,7 @@ msgstr ""
 "                "
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
-#: en/upgrading.dbk:935
+#: en/upgrading.dbk:971
 msgid ""
 "after the upgrade, restore the original <filename>/var/cache/apt/archives</"
 "filename> directory:"
@@ -1968,23 +2046,23 @@ msgstr ""
 "filename>-map:"
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
-#: en/upgrading.dbk:939
+#: en/upgrading.dbk:975
 #, no-wrap
 msgid ""
-"# umount /media/usbkey/archives\n"
+"# umount /var/cache/apt/archives\n"
 "                "
 msgstr ""
-"# umount /media/usbkey/archives\n"
+"# umount /var/cache/apt/archives\n"
 "                "
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
-#: en/upgrading.dbk:945
+#: en/upgrading.dbk:981
 msgid "remove the remaining <filename>/media/usbkey/archives</filename>."
 msgstr ""
 "verwijder de achtergebleven <filename>/media/usbkey/archives</filename>."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:949
+#: en/upgrading.dbk:985
 msgid ""
 "You can create the temporary cache directory on whatever filesystem is "
 "mounted on your system."
@@ -1993,7 +2071,7 @@ msgstr ""
 "dat aan uw systeem aangekoppeld is."
 
 #. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:956
+#: en/upgrading.dbk:992
 msgid ""
 "Do a minimal upgrade of the system (see <xref linkend=\"minimal-upgrade\"/"
 ">)  or partial upgrades of the system followed by a full upgrade.  This will "
@@ -2007,7 +2085,7 @@ msgstr ""
 "opwaardering uit te voeren."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:967
+#: en/upgrading.dbk:1003
 msgid ""
 "Note that in order to safely remove packages, it is advisable to switch your "
 "APT source-list files back to &oldreleasename; as described in <xref linkend="
@@ -2018,21 +2096,12 @@ msgstr ""
 "&oldreleasename;, zoals beschreven wordt in <xref linkend=\"old-sources\"/>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:974
+#: en/upgrading.dbk:1010
 msgid "Minimal system upgrade"
 msgstr "Een minimale opwaardering van het systeem"
 
-#. type: Content of: <chapter><section><section><important><para>
-#: en/upgrading.dbk:978
-msgid ""
-"If you are upgrading remotely, be aware of <xref linkend=\"ssh-not-available"
-"\"/>."
-msgstr ""
-"Als u vanop afstand opwaardeert, houd dan rekening met <xref linked=\"ssh-"
-"not-available\"/>."
-
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:982
+#: en/upgrading.dbk:1012
 msgid ""
 "In some cases, doing the full upgrade (as described below) directly might "
 "remove large numbers of packages that you will want to keep.  We therefore "
@@ -2049,12 +2118,12 @@ msgstr ""
 "beschreven in <xref linkend=\"upgrading-full\"/>."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:989
+#: en/upgrading.dbk:1019
 msgid "To do this, first run:"
 msgstr "Om dit te bereiken geeft u eerst het commando"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:992
+#: en/upgrading.dbk:1022
 #, no-wrap
 msgid ""
 "# apt upgrade --without-new-pkgs\n"
@@ -2064,7 +2133,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:995
+#: en/upgrading.dbk:1025
 msgid ""
 "This has the effect of upgrading those packages which can be upgraded "
 "without requiring any other packages to be removed or installed."
@@ -2074,7 +2143,7 @@ msgstr ""
 "worden."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1000
+#: en/upgrading.dbk:1030
 msgid ""
 "The minimal system upgrade can also be useful when the system is tight on "
 "space and a full upgrade cannot be run due to space constraints."
@@ -2084,7 +2153,7 @@ msgstr ""
 "opwaardering omwille van opslagruimtebeperkingen niet toegepast kan worden."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1005
+#: en/upgrading.dbk:1035
 msgid ""
 "If the <systemitem role=\"package\">apt-listchanges</systemitem> package is "
 "installed, it will (in its default configuration) show important information "
@@ -2099,12 +2168,12 @@ msgstr ""
 "met de opwaardering."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1015
+#: en/upgrading.dbk:1045
 msgid "Upgrading the system"
 msgstr "Het systeem opwaarderen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1017
+#: en/upgrading.dbk:1047
 msgid ""
 "Once you have taken the previous steps, you are now ready to continue with "
 "the main part of the upgrade.  Execute:"
@@ -2114,7 +2183,7 @@ msgstr ""
 "commando uit:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1021
+#: en/upgrading.dbk:1051
 #, no-wrap
 msgid ""
 "# apt full-upgrade\n"
@@ -2124,7 +2193,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1024
+#: en/upgrading.dbk:1054
 msgid ""
 "This will perform a complete upgrade of the system, installing the newest "
 "available versions of all packages, and resolving all possible dependency "
@@ -2140,7 +2209,7 @@ msgstr ""
 "pakketten verwijderen."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1031
+#: en/upgrading.dbk:1061
 msgid ""
 "When upgrading from a set of CDs/DVDs/BDs, you will probably be asked to "
 "insert specific discs at several points during the upgrade.  You might have "
@@ -2155,7 +2224,7 @@ msgstr ""
 "verschillende schijven opgeslagen werden."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1037
+#: en/upgrading.dbk:1067
 msgid ""
 "New versions of currently installed packages that cannot be upgraded without "
 "changing the install status of another package will be left at their current "
@@ -2173,12 +2242,12 @@ msgstr ""
 "install <replaceable>pakket</replaceable></literal> te gebruiken."
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:1049
+#: en/upgrading.dbk:1079
 msgid "Possible issues during upgrade"
 msgstr "Mogelijke problemen tijdens de opwaardering"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1052
+#: en/upgrading.dbk:1082
 msgid ""
 "The following sections describe known issues that might appear during an "
 "upgrade to &releasename;."
@@ -2187,7 +2256,7 @@ msgstr ""
 "eventueel kunnen manifesteren bij een opwaardering naar &releasename;."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1057
+#: en/upgrading.dbk:1087
 msgid ""
 "Dist-upgrade fails with <quote>Could not perform immediate configuration</"
 "quote>"
@@ -2196,7 +2265,7 @@ msgstr ""
 "onmiddellijke configuratie niet uitvoeren</quote>"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1059
+#: en/upgrading.dbk:1089
 msgid ""
 "In some cases the <command>apt full-upgrade</command> step can fail after "
 "downloading packages with:"
@@ -2205,7 +2274,7 @@ msgstr ""
 "downloaden van de pakketten mislukken met:"
 
 #. type: Content of: <chapter><section><section><para><screen>
-#: en/upgrading.dbk:1062
+#: en/upgrading.dbk:1092
 #, no-wrap
 msgid ""
 "E: Could not perform immediate configuration on '<replaceable>package</replaceable>'.  Please see man 5 apt.conf under APT::Immediate-Configure for details.\n"
@@ -2215,7 +2284,7 @@ msgstr ""
 "      "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1066
+#: en/upgrading.dbk:1096
 msgid ""
 "If that happens, running <command>apt full-upgrade -o APT::Immediate-"
 "Configure=0</command> instead should allow the upgrade to proceed."
@@ -2225,7 +2294,7 @@ msgstr ""
 "command> als commando te gebruiken."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1071
+#: en/upgrading.dbk:1101
 msgid ""
 "Another possible workaround for this problem is to temporarily add both "
 "&oldreleasename; and &releasename; sources to your APT source-list files and "
@@ -2237,12 +2306,12 @@ msgstr ""
 "te geven."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1078
+#: en/upgrading.dbk:1108
 msgid "Expected removals"
 msgstr "Te verwachten verwijderingen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1080
+#: en/upgrading.dbk:1110
 msgid ""
 "The upgrade process to &releasename; might ask for the removal of packages "
 "on the system. The precise list of packages will vary depending on the set "
@@ -2262,12 +2331,12 @@ msgstr ""
 "pakketten vindt u in <xref linkend=\"obsolete\"/>."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1092
+#: en/upgrading.dbk:1122
 msgid "Conflicts or Pre-Depends loops"
 msgstr "Vicieuze cirkels van conflicten of voorvereisten"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1095
+#: en/upgrading.dbk:1125
 msgid ""
 "Sometimes it's necessary to enable the <literal>APT::Force-LoopBreak</"
 "literal> option in APT to be able to temporarily remove an essential package "
@@ -2286,7 +2355,7 @@ msgstr ""
 "op te geven."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1103
+#: en/upgrading.dbk:1133
 msgid ""
 "It is possible that a system's dependency structure can be so corrupt as to "
 "require manual intervention.  Usually this means using <command>apt</"
@@ -2297,7 +2366,7 @@ msgstr ""
 "<command>apt</command> gebruikt zal moeten worden of"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1108
+#: en/upgrading.dbk:1138
 #, no-wrap
 msgid ""
 "# dpkg --remove <replaceable>package_name</replaceable>\n"
@@ -2307,13 +2376,13 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1111
+#: en/upgrading.dbk:1141
 msgid "to eliminate some of the offending packages, or"
 msgstr ""
 "om sommige van de voor problemen zorgende pakketten uit de weg ruimen, of"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1114
+#: en/upgrading.dbk:1144
 #, no-wrap
 msgid ""
 "# apt -f install\n"
@@ -2325,7 +2394,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1118
+#: en/upgrading.dbk:1148
 msgid ""
 "In extreme cases you might have to force re-installation with a command like"
 msgstr ""
@@ -2333,7 +2402,7 @@ msgstr ""
 "een commando zoals"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1121
+#: en/upgrading.dbk:1151
 #, no-wrap
 msgid ""
 "# dpkg --install <replaceable>/path/to/package_name.deb</replaceable>\n"
@@ -2343,12 +2412,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1127
+#: en/upgrading.dbk:1157
 msgid "File conflicts"
 msgstr "Bestandsconflicten"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1130
+#: en/upgrading.dbk:1160
 msgid ""
 "File conflicts should not occur if you upgrade from a <quote>pure</quote> "
 "&oldreleasename; system, but can occur if you have unofficial backports "
@@ -2361,7 +2430,7 @@ msgstr ""
 "heeft. Bij een bestandsconflict krijgt u een foutmelding zoals:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1135
+#: en/upgrading.dbk:1165
 #, no-wrap
 msgid ""
 "Unpacking <replaceable>&lt;package-foo&gt;</replaceable> (from <replaceable>&lt;package-foo-file&gt;</replaceable>) ...\n"
@@ -2383,7 +2452,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1144
+#: en/upgrading.dbk:1174
 msgid ""
 "You can try to solve a file conflict by forcibly removing the package "
 "mentioned on the <emphasis>last</emphasis> line of the error message:"
@@ -2393,7 +2462,7 @@ msgstr ""
 "geforceerd te verwijderen:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1148
+#: en/upgrading.dbk:1178
 #, no-wrap
 msgid ""
 "# dpkg -r --force-depends <replaceable>package_name</replaceable>\n"
@@ -2403,7 +2472,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1151
+#: en/upgrading.dbk:1181
 msgid ""
 "After fixing things up, you should be able to resume the upgrade by "
 "repeating the previously described <command>apt</command> commands."
@@ -2413,12 +2482,12 @@ msgstr ""
 "nogmaals uit te voeren."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1158
+#: en/upgrading.dbk:1188
 msgid "Configuration changes"
 msgstr "Configuratiewijzigingen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1161
+#: en/upgrading.dbk:1191
 msgid ""
 "During the upgrade, you will be asked questions regarding the configuration "
 "or re-configuration of several packages.  When you are asked if any file in "
@@ -2438,7 +2507,7 @@ msgstr ""
 "de extensie <literal>.dpkg-old</literal>."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1170
+#: en/upgrading.dbk:1200
 msgid ""
 "If you're not sure what to do, write down the name of the package or file "
 "and sort things out at a later time.  You can search in the typescript file "
@@ -2450,12 +2519,12 @@ msgstr ""
 "verscheen, nog eens nalezen."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1177
+#: en/upgrading.dbk:1207
 msgid "Change of session to console"
 msgstr "Verspringen van de sessie naar een console"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1179
+#: en/upgrading.dbk:1209
 msgid ""
 "If you are running the upgrade using the system's local console you might "
 "find that at some points during the upgrade the console is shifted over to a "
@@ -2471,7 +2540,7 @@ msgstr ""
 "beeldschermbeheerder opnieuw opgestart wordt."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1186
+#: en/upgrading.dbk:1216
 msgid ""
 "To recover the console where the upgrade was running you will have to use "
 "<keycombo action='simul'><keycap>Ctrl</keycap><keycap>Alt</"
@@ -2498,12 +2567,12 @@ msgstr ""
 "tussen de verschillende tekstmodus-terminals."
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:1203
+#: en/upgrading.dbk:1233
 msgid "Upgrading your kernel and related packages"
 msgstr "Uw kernel en aanverwante pakketten opwaarderen"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1205
+#: en/upgrading.dbk:1235
 msgid ""
 "This section explains how to upgrade your kernel and identifies potential "
 "issues related to this upgrade.  You can either install one of the "
@@ -2517,7 +2586,7 @@ msgstr ""
 "compileren uit de broncode."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1211
+#: en/upgrading.dbk:1241
 msgid ""
 "Note that a lot of information in this section is based on the assumption "
 "that you will be using one of the modular Debian kernels, together with "
@@ -2535,12 +2604,12 @@ msgstr ""
 "zijn."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1219
+#: en/upgrading.dbk:1249
 msgid "Installing a kernel metapackage"
 msgstr "Een kernel-metapakket installeren"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1221
+#: en/upgrading.dbk:1251
 msgid ""
 "When you full-upgrade from &oldreleasename; to &releasename;, it is strongly "
 "recommended that you install a linux-image-* metapackage, if you have not "
@@ -2556,7 +2625,7 @@ msgstr ""
 "metapakket geïnstalleerd heeft met het commando"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1228
+#: en/upgrading.dbk:1258
 #, no-wrap
 msgid ""
 "# dpkg -l \"linux-image*\" | grep ^ii | grep -i meta\n"
@@ -2566,7 +2635,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1231
+#: en/upgrading.dbk:1261
 msgid ""
 "If you do not see any output, then you will either need to install a new "
 "linux-image package by hand or install a linux-image metapackage.  To see a "
@@ -2578,7 +2647,7 @@ msgstr ""
 "krijgen, geeft u de opdracht"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1236
+#: en/upgrading.dbk:1266
 #, no-wrap
 msgid ""
 "# apt-cache search linux-image- | grep -i meta | grep -v transition\n"
@@ -2588,7 +2657,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1240
+#: en/upgrading.dbk:1270
 msgid ""
 "If you are unsure about which package to select, run <literal>uname -r</"
 "literal> and look for a package with a similar name.  For example, if you "
@@ -2607,7 +2676,7 @@ msgstr ""
 "het beste pakket uit de beschikbare pakketten. Bijvoorbeeld:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1249
+#: en/upgrading.dbk:1279
 #, no-wrap
 msgid ""
 "# apt show linux-image-amd64\n"
@@ -2617,7 +2686,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1252
+#: en/upgrading.dbk:1282
 msgid ""
 "You should then use <literal>apt install</literal> to install it.  Once this "
 "new kernel is installed you should reboot at the next available opportunity "
@@ -2633,7 +2702,7 @@ msgstr ""
 "opwaardering."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1259
+#: en/upgrading.dbk:1289
 msgid ""
 "For the more adventurous there is an easy way to compile your own custom "
 "kernel on &debian;.  Install the kernel sources, provided in the <systemitem "
@@ -2655,7 +2724,7 @@ msgstr ""
 "<systemitem role=\"package\">debian-kernel-handbook</systemitem>."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1269
+#: en/upgrading.dbk:1299
 msgid ""
 "If possible, it is to your advantage to upgrade the kernel package "
 "separately from the main <literal>full-upgrade</literal> to reduce the "
@@ -2671,12 +2740,12 @@ msgstr ""
 "\"/>."
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:1280
+#: en/upgrading.dbk:1310
 msgid "Preparing for the next release"
 msgstr "Voorbereid zijn op de volgende release"
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1282
+#: en/upgrading.dbk:1312
 msgid ""
 "After the upgrade there are several things you can do to prepare for the "
 "next release."
@@ -2685,7 +2754,7 @@ msgstr ""
 "de volgende release."
 
 #. type: Content of: <chapter><section><itemizedlist><listitem><para>
-#: en/upgrading.dbk:1288
+#: en/upgrading.dbk:1318
 msgid ""
 "Remove newly redundant or obsolete packages as described in <xref linkend="
 "\"sufficient-space\"/> and <xref linkend=\"obsolete\"/>.  You should review "
@@ -2700,12 +2769,12 @@ msgstr ""
 "verwijderd worden. Zie ook <xref linkend=\"purge-removed-packages\" />."
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1298
+#: en/upgrading.dbk:1328
 msgid "Purging removed packages"
 msgstr "Verwijderde pakketten wissen"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1300
+#: en/upgrading.dbk:1330
 msgid ""
 "It is generally advisable to purge removed packages.  This is especially "
 "true if these have been removed in an earlier release upgrade (e.g. from the "
@@ -2720,7 +2789,7 @@ msgstr ""
 "zorgen."
 
 #. type: Content of: <chapter><section><section><caution><para>
-#: en/upgrading.dbk:1308
+#: en/upgrading.dbk:1338
 msgid ""
 "Purging a package will generally also purge its log files, so you might want "
 "to back them up first."
@@ -2729,7 +2798,7 @@ msgstr ""
 "ervan gewist. Misschien wilt u er eerst een reservekopie van maken."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1313
+#: en/upgrading.dbk:1343
 msgid ""
 "The following command displays a list of all removed packages that may have "
 "configuration files left on the system (if any):"
@@ -2739,7 +2808,7 @@ msgstr ""
 "van toepassing):"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1317
+#: en/upgrading.dbk:1347
 #, no-wrap
 msgid ""
 "# dpkg -l | awk '/^rc/ { print $2 }'\n"
@@ -2749,7 +2818,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1320
+#: en/upgrading.dbk:1350
 msgid ""
 "The packages can be removed by using <command>apt purge</command>.  Assuming "
 "you want to purge all of them in one go, you can use the following command:"
@@ -2759,7 +2828,7 @@ msgstr ""
 "kunt u het volgende commando gebruiken:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1325
+#: en/upgrading.dbk:1355
 #, no-wrap
 msgid ""
 "# apt purge $(dpkg -l | awk '/^rc/ { print $2 }')\n"
@@ -2769,7 +2838,7 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1328
+#: en/upgrading.dbk:1358
 msgid ""
 "If you use <systemitem role=\"package\">aptitude</systemitem>, you can also "
 "use the following alternative to the commands above:"
@@ -2778,7 +2847,7 @@ msgstr ""
 "als alternatief voor de bovenstaande commando's ook het volgende gebruiken:"
 
 #. type: Content of: <chapter><section><section><screen>
-#: en/upgrading.dbk:1332
+#: en/upgrading.dbk:1362
 #, no-wrap
 msgid ""
 "# aptitude search '~c'\n"
@@ -2790,12 +2859,12 @@ msgstr ""
 "    "
 
 #. type: Content of: <chapter><section><title>
-#: en/upgrading.dbk:1340
+#: en/upgrading.dbk:1370
 msgid "Obsolete packages"
 msgstr "Verouderde pakketten"
 
 #. type: Content of: <chapter><section><para><footnote><para>
-#: en/upgrading.dbk:1346
+#: en/upgrading.dbk:1376
 msgid ""
 "Or for as long as there is not another release in that time frame.  "
 "Typically only two stable releases are supported at any given time."
@@ -2805,7 +2874,7 @@ msgstr ""
 "ondersteund."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1342
+#: en/upgrading.dbk:1372
 msgid ""
 "Introducing lots of new packages, &releasename; also retires and omits quite "
 "a few old packages that were in &oldreleasename;.  It provides no upgrade "
@@ -2828,7 +2897,7 @@ msgstr ""
 "dergelijk alternatief te vervangen."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1353
+#: en/upgrading.dbk:1383
 msgid ""
 "There are many reasons why packages might have been removed from the "
 "distribution: they are no longer maintained upstream; there is no longer a "
@@ -2847,7 +2916,7 @@ msgstr ""
 "het pakket wel nog aanwezig zijn in de distributie <quote>unstable</quote>."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1361
+#: en/upgrading.dbk:1391
 msgid ""
 "Some package management front-ends provide easy ways of finding installed "
 "packages that are no longer available from any known repository. The "
@@ -2863,7 +2932,7 @@ msgstr ""
 "weergegeven en gewist worden met:"
 
 #. type: Content of: <chapter><section><screen>
-#: en/upgrading.dbk:1368
+#: en/upgrading.dbk:1398
 #, no-wrap
 msgid ""
 "# aptitude search '~o'\n"
@@ -2875,7 +2944,7 @@ msgstr ""
 "  "
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1372
+#: en/upgrading.dbk:1402
 msgid ""
 "The <ulink url=\"&url-bts;\">Debian Bug Tracking System</ulink> often "
 "provides additional information on why the package was removed.  You should "
@@ -2891,7 +2960,7 @@ msgstr ""
 "ulink> erop nakijken."
 
 #. type: Content of: <chapter><section><para>
-#: en/upgrading.dbk:1381
+#: en/upgrading.dbk:1411
 msgid ""
 "For a list of obsolete packages for &Releasename;, please refer to <xref "
 "linkend=\"noteworthy-obsolete-packages\"/>."
@@ -2900,12 +2969,12 @@ msgstr ""
 "linkend=\"noteworthy-obsolete-packages\"/>"
 
 #. type: Content of: <chapter><section><section><title>
-#: en/upgrading.dbk:1386
+#: en/upgrading.dbk:1416
 msgid "Transitional dummy packages"
 msgstr "Dummy overgangspakketten"
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1388
+#: en/upgrading.dbk:1418
 msgid ""
 "Some packages from &oldreleasename; may have been replaced in &releasename; "
 "by transitional dummy packages, which are empty placeholders designed to "
@@ -2925,7 +2994,7 @@ msgstr ""
 "overbodige dummypakket veilig verwijderd worden."
 
 #. type: Content of: <chapter><section><section><para>
-#: en/upgrading.dbk:1397
+#: en/upgrading.dbk:1427
 msgid ""
 "The package descriptions for transitional dummy packages usually indicate "
 "their purpose. However, they are not uniform; in particular, some "
# Dutch translation of the Debian release notes.
# Copyright (C) 2012 The Debian Project.
# This file is distributed under the same license as the Debian release notes.
# Frans Spiesschaert <Frans.Spiesschaert@yucom.be>, 2017, 2019, 2021-2022.
#
msgid ""
msgstr ""
"Project-Id-Version: release-notes/upgrading\n"
"POT-Creation-Date: 2022-12-19 18:04+0100\n"
"PO-Revision-Date: 2022-12-19 21:31+0100\n"
"Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
"Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 2.2.1\n"

#. type: Attribute 'lang' of: <chapter>
#: en/upgrading.dbk:8
msgid "en"
msgstr "nl"

#. type: Content of: <chapter><title>
#: en/upgrading.dbk:9
msgid "Upgrades from Debian &oldrelease; (&oldreleasename;)"
msgstr "Opwaarderen vanuit Debian &oldrelease; (&oldreleasename;)"

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:11
msgid "Preparing for the upgrade"
msgstr "Zich op de opwaardering voorbereiden"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:13
msgid ""
"We suggest that before upgrading you also read the information in <xref "
"linkend=\"ch-information\"/>.  That chapter covers potential issues which "
"are not directly related to the upgrade process but could still be important "
"to know about before you begin."
msgstr ""
"We raden aan dat u voor de opwaardering ook de informatie leest in <xref "
"linkend=\"ch-information\"/>. In dat hoofdstuk worden mogelijke problemen "
"behandeld die niet rechtstreeks in verband staan met het opwaarderingsproces "
"zelf, maar waarvan het toch belangrijk is dat u erover geïnformeerd bent "
"voor u met de opwaardering begint."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:19
msgid "Back up any data or configuration information"
msgstr "Maak een reservekopie van alle gegevens en configuratie-informatie"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:21
msgid ""
"Before upgrading your system, it is strongly recommended that you make a "
"full backup, or at least back up any data or configuration information you "
"can't afford to lose.  The upgrade tools and process are quite reliable, but "
"a hardware failure in the middle of an upgrade could result in a severely "
"damaged system."
msgstr ""
"Het wordt sterk aanbevolen om een volledige back-up te maken voor u het "
"systeem opwaardeert, of dat u minstens een reservekopie maakt van alle "
"gegevens en alle configuratie-informatie die u zeker niet mag verliezen. Het "
"opwaarderingsgereedschap en het opwaarderingsproces zijn behoorlijk "
"betrouwbaar, maar een stoornis van de hardware middenin de opwaardering zou "
"kunnen leiden tot een ernstig beschadigd systeem."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:28
msgid ""
"The main things you'll want to back up are the contents of <filename>/etc</"
"filename>, <filename>/var/lib/dpkg</filename>, <filename>/var/lib/apt/"
"extended_states</filename> and the output of <literal>dpkg --get-selections "
"\"*\"</literal> (the quotes are important).  If you use <command>aptitude</"
"command> to manage packages on your system, you will also want to back up "
"<filename>/var/lib/aptitude/pkgstates</filename>."
msgstr ""
"De belangrijkste zaken waarvan u een reservekopie zou moeten maken, zijn de "
"inhoud van <filename>/etc</filename>, <filename>/var/lib/dpkg</filename> en "
"van <filename>/var/lib/apt/extended_states</filename> en de uitvoer van "
"<literal>dpkg --get-selections \"*\"</literal> (de aanhalingstekens hebben "
"hun belang). Indien u <command>aptitude</command> gebruikt om de pakketten "
"op uw systeem te beheren, neemt u best ook een reservekopie van <filename>/"
"var/lib/aptitude/pkgstates</filename>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:36
msgid ""
"The upgrade process itself does not modify anything in the <filename>/home</"
"filename> directory.  However, some applications (e.g.  parts of the Mozilla "
"suite, and the GNOME and KDE desktop environments) are known to overwrite "
"existing user settings with new defaults when a new version of the "
"application is first started by a user.  As a precaution, you may want to "
"make a backup of the hidden files and directories (<quote>dotfiles</quote>) "
"in users' home directories.  This backup may help to restore or recreate the "
"old settings.  You may also want to inform users about this."
msgstr ""
"Het opwaarderingsproces zelf verandert niets in de map <filename>/home</"
"filename>. Maar het is bekend dat sommige toepassingen (bijv. onderdelen van "
"de Mozilla-suite en de desktopomgevingen GNOME en KDE) bestaande "
"gebruikersinstellingen overschrijven met nieuwe standaardwaarden wanneer de "
"gebruiker voor het eerst een nieuwe versie van de toepassing start. Bij "
"wijze van voorzorg kunt u een reservekopie maken van de verborgen bestanden "
"en mappen (<quote>dotfiles of puntbestanden</quote>) in de persoonlijke "
"mappen van de gebruikers. Een dergelijke back-up kan helpen bij het "
"herstellen of het opnieuw creëren van de vroegere instellingen. Wellicht "
"wilt u uw gebruikers daarover ook inlichten."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:46
msgid ""
"Any package installation operation must be run with superuser privileges, so "
"either log in as <literal>root</literal> or use <command>su</command> or "
"<command>sudo</command> to gain the necessary access rights."
msgstr ""
"Elke pakketinstallatiebewerking moet uitgevoerd worden met de voorrechten "
"van de superuser, dus als systeembeheerder. Daarom moet u zich ofwel "
"aanmelden als gebruiker <literal>root</literal> of het commando <command>su</"
"command> of <command>sudo</command> gebruiken om de vereiste toegangsrechten "
"te verwerven."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:51
msgid ""
"The upgrade has a few preconditions; you should check them before actually "
"executing the upgrade."
msgstr ""
"De opwaardering stelt een aantal voorwaarden, waaraan vooraf voldaan moet "
"worden. Controleer ze vooraleer u de opwaardering daadwerkelijk uitvoert."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:58
msgid "Inform users in advance"
msgstr "Informeer gebruikers vooraf"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:60
msgid ""
"It's wise to inform all users in advance of any upgrades you're planning, "
"although users accessing your system via an <command>ssh</command> "
"connection should notice little during the upgrade, and should be able to "
"continue working."
msgstr ""
"Het is verstandig om alle gebruikers vooraf te informeren over elke "
"opwaardering die u van plan bent uit te voeren, hoewel gebruikers die via "
"een <command>ssh</command>-verbinding op uw systeem werken, weinig zouden "
"mogen merken van de opwaardering en gewoon zouden moeten kunnen voortwerken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:66
msgid ""
"If you wish to take extra precautions, back up or unmount the <filename>/"
"home</filename> partition before upgrading."
msgstr ""
"Wenst u extra voorzorgsmaatregelen te nemen, maak dan voor de opwaardering "
"een reservekopie van de <filename>/home</filename>-partitie of koppel ze af."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:70
msgid ""
"You will have to do a kernel upgrade when upgrading to &releasename;, so a "
"reboot will be necessary.  Typically, this will be done after the upgrade is "
"finished."
msgstr ""
"U zult een opwaardering van de kernel moeten uitvoeren bij het opwaarderen "
"naar &releasename;. Een herstart van het systeem zal dus nodig zijn. "
"Gewoonlijk wordt dit gedaan na het afronden van de opwaardering."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:78
msgid "Prepare for downtime on services"
msgstr ""
"Bereid u voor op het feit dat diensten een tijd onbeschikbaar zullen zijn"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:81
msgid ""
"There might be services that are offered by the system which are associated "
"with packages that will be included in the upgrade. If this is the case, "
"please note that, during the upgrade, these services will be stopped while "
"their associated packages are being replaced and configured. During this "
"time, these services will not be available."
msgstr ""
"Mogelijk levert uw systeem diensten die gekoppeld zijn aan pakketten die bij "
"de opwaardering betrokken zijn. Is dit het geval, houd er dan rekening mee "
"dat deze diensten tijdens de opwaardering gestopt zullen worden terwijl de "
"betreffende pakketten vervangen en geconfigureerd worden. Gedurende die tijd "
"zullen die diensten niet beschikbaar zijn."

#. type: Content of: <chapter><section><section><para><footnote><para>
#: en/upgrading.dbk:94
msgid ""
"If the debconf priority is set to a very high level you might prevent "
"configuration prompts, but services that rely on default answers that are "
"not applicable to your system will fail to start."
msgstr ""
"Indien de debconf-prioriteit ingesteld staat op een erg hoog niveau, "
"onderdrukt u mogelijk configuratievragen. Echter, diensten die terugvallen "
"op standaardantwoorden die op uw systeem niet toepasbaar zijn, zullen dan "
"niet kunnen starten."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:89
msgid ""
"The precise downtime for these services will vary depending on the number of "
"packages being upgraded in the system, and it also includes the time the "
"system administrator spends answering any configuration questions from "
"package upgrades.  Notice that if the upgrade process is left unattended and "
"the system requests input during the upgrade there is a high possibility of "
"services being unavailable<placeholder type=\"footnote\" id=\"0\"/> for a "
"significant period of time."
msgstr ""
"De exacte duur van onbeschikbaarheid van deze diensten kan variëren, "
"afhankelijk van het aantal pakketten dat op het systeem opgewaardeerd wordt. "
"Ook de tijd die de systeembeheerder nodig heeft voor het beantwoorden van "
"eventuele configuratievragen die gepaard gaan met de opwaardering van de "
"pakketten, speelt daarin mee. Noteer dat als het opwaarderingsproces zonder "
"toezicht verloopt en het systeem om invoer vraagt tijdens de opwaardering, "
"er een grote kans bestaat dat diensten gedurende een significante periode "
"onbeschikbaar<placeholder type=\"footnote\" id=\"0\"/> zullen blijven."

#. type: Content of: <chapter><section><section><para><footnote><para>
#: en/upgrading.dbk:102
msgid ""
"For example: DNS or DHCP services, especially when there is no redundancy or "
"failover. In the DHCP case end-users might be disconnected from the network "
"if the lease time is lower than the time it takes for the upgrade process to "
"complete."
msgstr ""
"Voorbeelden zijn DNS- en DHCP-diensten, in het bijzonder wanneer er geen "
"redundantie of automatische doorschakeling voorzien is. In het geval van "
"DHCP kunnen gebruikers afgekoppeld worden van het netwerk als de "
"leasetermijn korter is dan de tijd die nodig is om het opwaarderingsproces "
"te voltooien."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:101
msgid ""
"If the system being upgraded provides critical services for your users or "
"the network<placeholder type=\"footnote\" id=\"0\"/>, you can reduce the "
"downtime if you do a minimal system upgrade, as described in <xref linkend="
"\"minimal-upgrade\"/>, followed by a kernel upgrade and reboot, and then "
"upgrade the packages associated with your critical services. Upgrade these "
"packages prior to doing the full upgrade described in <xref linkend="
"\"upgrading-full\"/>.  This way you can ensure that these critical services "
"are running and available through the full upgrade process, and their "
"downtime is reduced."
msgstr ""
"Indien het systeem dat opgewaardeerd wordt, cruciale diensten levert voor uw "
"gebruikers of voor het netwerk<placeholder type=\"footnote\" id=\"0\"/>, "
"kunt u de periode van onbeschikbaarheid verkleinen door een minimale "
"opwaardering van het systeem uit te voeren, zoals beschreven wordt in <xref "
"linkend=\"minimal-upgrade\"/>, daarna een opwaardering van de kernel uit te "
"voeren, het systeem vervolgens opnieuw te starten en pas nadien de pakketten "
"die verband houden met die cruciale diensten op te waarderen. Waardeer deze "
"pakketten in een dergelijk geval op vooraleer u een \"full upgrade\", een "
"volledige opwaardering, uitvoert zoals beschreven in <xref linkend="
"\"upgrading-full\"/>. Op die manier kunt u ervoor zorgen dat deze cruciale "
"diensten actief en beschikbaar zijn gedurende het proces van volledige "
"opwaardering, zodat de tijd waarin ze onbeschikbaar zijn, beperkt gehouden "
"wordt."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:118
msgid "Prepare for recovery"
msgstr "Tref voorbereidingen om een hersteloperatie te kunnen uitvoeren"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:120
msgid ""
"Although Debian tries to ensure that your system stays bootable at all "
"times, there is always a chance that you may experience problems rebooting "
"your system after the upgrade.  Known potential issues are documented in "
"this and the next chapters of these Release Notes."
msgstr ""
"Hoewel Debian er tracht voor te zorgen dat uw systeem op elk moment tot "
"opstarten in staat blijft, blijft er altijd een kans bestaan dat u na de "
"opwaardering problemen ervaart bij het herstarten van het systeem. Mogelijke "
"problemen die bekend zijn, worden in dit en de volgende hoofdstukken van "
"deze notities bij de release behandeld."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:126
msgid ""
"For this reason it makes sense to ensure that you will be able to recover if "
"your system should fail to reboot or, for remotely managed systems, fail to "
"bring up networking."
msgstr ""
"Om die reden heeft het zin dat u voorbereidingen treft om in staat te zijn "
"aan de situatie te verhelpen, mocht blijken dat het heropstarten van het "
"systeem mislukt, of het herstellen van de netwerkfunctionaliteit bij vanop "
"afstand beheerde systemen niet succesvol is."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:132
msgid ""
"If you are upgrading remotely via an <command>ssh</command> link it is "
"recommended that you take the necessary precautions to be able to access the "
"server through a remote serial terminal.  There is a chance that, after "
"upgrading the kernel and rebooting, you will have to fix the system "
"configuration through a local console.  Also, if the system is rebooted "
"accidentally in the middle of an upgrade there is a chance you will need to "
"recover using a local console."
msgstr ""
"Indien u de opwaardering via een <command>ssh</command>-verbinding vanop "
"afstand uitvoert, is het aangeraden om de nodige voorzorgen te treffen, "
"zodat u in staat bent toegang te hebben tot de server via een externe "
"seriële terminal. De mogelijkheid bestaat dat u na het opwaarderen van de "
"kernel en het herstarten van het systeem, via een lokale console de "
"systeemconfiguratie zult moeten repareren. Ook is het mogelijk dat wanneer "
"het systeem middenin de opwaardering per ongeluk herstart wordt, u via een "
"lokale console herstelwerkzaamheden zult moeten uitvoeren."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:142
msgid ""
"For emergency recovery we generally recommend using the <emphasis>rescue "
"mode</emphasis> of the &releasename; Debian Installer.  The advantage of "
"using the installer is that you can choose between its many methods to find "
"one that best suits your situation.  For more information, please consult "
"the section <quote>Recovering a Broken System</quote> in chapter 8 of the "
"<ulink url=\"&url-install-manual;\">Installation Guide</ulink> and the "
"<ulink url=\"&url-wiki;DebianInstaller/FAQ\">Debian Installer FAQ</ulink>."
msgstr ""
"Voor noodherstel bevelen we over het algemeen het gebruik aan van de "
"<emphasis>reparatiemodus</emphasis> van de Debian Installer van "
"&releasename;. Het voordeel van het gebruik van het installatiesysteem is "
"dat u de keuze heeft uit zijn talrijke methodes om er die uit te kiezen die "
"het beste aansluit bij uw situatie. Voor bijkomende informatie kunt u de "
"paragraaf <quote>Een defect systeem herstellen</quote> uit hoofdstuk 8 van "
"de <ulink url=\"&url-install-manual;\">Installatiehandleiding</ulink> "
"raadplegen en ook de <ulink url=\"&url-wiki;DebianInstaller/FAQ\">Debian "
"Installer FAQ</ulink>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:153
msgid ""
"If that fails, you will need an alternative way to boot your system so you "
"can access and repair it.  One option is to use a special rescue or <ulink "
"url=\"https://www.debian.org/CD/live/\";>live install</ulink> image.  After "
"booting from that, you should be able to mount your root file system and "
"<command>chroot</command> into it to investigate and fix the problem."
msgstr ""
"Indien dat mislukt zult u een andere manier moeten vinden om uw systeem op "
"te starten, zodat u er toegang toe krijgt en het kunt herstellen. Een "
"mogelijkheid is een speciaal reparatie-image gebruiken of een <ulink url="
"\"https://www.debian.org/CD/live/\";>live installatie-image</ulink>. Nadat u "
"daarmee het systeem opgestart heeft, zou u in staat moeten zijn het "
"basisbestandssysteem ervan aan te koppelen en die omgeving terug binnen te "
"gaan met het commando <literal>chroot</literal> om het probleem te "
"onderzoeken en te repareren."

#. type: Content of: <chapter><section><section><section><title>
#: en/upgrading.dbk:161
msgid "Debug shell during boot using initrd"
msgstr "Een debug-shell tijdens het opstarten met initrd"

#. type: Content of: <chapter><section><section><section><para><footnote><para>
#: en/upgrading.dbk:164
msgid ""
"This feature can be disabled by adding the parameter <literal>panic=0</"
"literal> to your boot parameters."
msgstr ""
"Deze functionaliteit kan uitgezet worden door de parameter <literal>panic=0</"
"literal> toe te voegen aan de opstartparameters."

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:163
msgid ""
"The <systemitem role=\"package\">initramfs-tools</systemitem> package "
"includes a debug shell<placeholder type=\"footnote\" id=\"0\"/> in the "
"initrds it generates.  If for example the initrd is unable to mount your "
"root file system, you will be dropped into this debug shell which has basic "
"commands available to help trace the problem and possibly fix it."
msgstr ""
"Het pakket <systemitem role=\"package\">initramfs-tools</systemitem> voegt "
"een debug-shell<placeholder type=\"footnote\" id=\"0\"/> toe aan het initrds "
"dat het genereert. Indien bijvoorbeeld het initrd er niet in slaagt om uw "
"basisbestandssysteem aan te koppelen, zult u terechtkomen in die debug-shell "
"waarin basiscommando's ter beschikking staan die u kunnen helpen om het "
"probleem op te sporen en te onderzoeken en het eventueel te repareren."

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:171
msgid ""
"Basic things to check are: presence of correct device files in <filename>/"
"dev</filename>; what modules are loaded (<literal>cat /proc/modules</"
"literal>); output of <command>dmesg</command> for errors loading drivers.  "
"The output of <command>dmesg</command> will also show what device files have "
"been assigned to which disks; you should check that against the output of "
"<literal>echo $ROOT</literal> to make sure that the root file system is on "
"the expected device."
msgstr ""
"Basisgegevens die u moet controleren zijn: de aanwezigheid van correcte "
"apparaatbestanden in <filename>/dev</filename>; welke modules geladen zijn "
"(<literal>cat /proc/modules</literal>); de uitvoer van <command>dmesg</"
"command> op foutmeldingen over het laden van stuurprogramma's. De uitvoer "
"van <command>dmesg</command> zal ook laten zien welk apparaatbestand "
"toegewezen werd aan welke schijf; u moet dit toetsen aan de uitvoer van "
"<literal>echo $ROOT</literal> om er zeker van te zijn dat het "
"basisbestandssysteem zich op het verwachte apparaat bevindt."

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:180
msgid ""
"If you do manage to fix the problem, typing <literal>exit</literal> will "
"quit the debug shell and continue the boot process at the point it failed.  "
"Of course you will also need to fix the underlying problem and regenerate "
"the initrd so the next boot won't fail again."
msgstr ""
"Indien u er in slaagt het probleem te verhelpen, kunt u de debug-shell "
"verlaten door <literal>exit</literal> te typen en vervolgens zal het "
"opstartproces verdergaan op het punt waarop het mislukte. Natuurlijk zult u "
"ook het onderliggende probleem moeten repareren en het initrd opnieuw moeten "
"genereren, zodat de volgende herstart niet opnieuw mislukt."

#. type: Content of: <chapter><section><section><section><title>
#: en/upgrading.dbk:187
msgid "Debug shell during boot using systemd"
msgstr "Een debug-shell tijdens het opstarten met systemd"

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:189
msgid ""
"If the boot fails under systemd, it is possible to obtain a debug root shell "
"by changing the kernel command line.  If the basic boot succeeds, but some "
"services fail to start, it may be useful to add <literal>systemd.unit=rescue."
"target</literal> to the kernel parameters."
msgstr ""
"Indien onder systemd het opstarten mislukt, kunt u een debug-shell voor root "
"krijgen door de commandoregel voor de kernel aan te passen. Indien basaal "
"opstarten wel lukt, maar sommige diensten niet willen starten, kan het "
"nuttig zijn om <literal>systemd.unit=rescue.target</literal> toe te voegen "
"aan de parameters voor de kernel."

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:196
msgid ""
"Otherwise, the kernel parameter <literal>systemd.unit=emergency.target</"
"literal> will provide you with a root shell at the earliest possible point.  "
"However, this is done before mounting the root file system with read-write "
"permissions.  You will have to do that manually with:"
msgstr ""
"Anders zal de kernelparameter <literal>systemd.unit=emergency.target</"
"literal> u zo vroeg mogelijk een root-shell leveren. Dit gebeurt echter "
"voordat het basisbestandssysteem aangekoppeld wordt met lees- en "
"schrijfrechten. U zult dit handmatig moeten doen met:"

#. type: Content of: <chapter><section><section><section><screen>
#: en/upgrading.dbk:203
#, no-wrap
msgid ""
"# mount -o remount,rw /\n"
"      "
msgstr ""
"# mount -o remount,rw /\n"
"      "

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:206
msgid ""
"Another approach is to enable the systemd <quote>early debug shell</quote> "
"via the <literal>debug-shell.service</literal>.  On the next boot this "
"service opens a root login shell on tty9 very early in the boot process.  It "
"can be enabled with the kernel boot parameter <literal>systemd.debug-"
"shell=1</literal>, or made persistent with <command>systemctl enable debug-"
"shell</command> (in which case it should be disabled again when debugging is "
"completed)."
msgstr ""
"Een andere aanpak is de <quote>vroegtijdige debug-shell</quote> van systemd "
"inschakelen via de <literal>debug-shell.service</literal>. Wanneer dan de "
"volgende keer opgestart wordt, wordt heel vroeg in het opstartproces een "
"login-shell voor root geopend op tty9. Dit kan ingeschakeld worden met de "
"kernel-opstartparameter <literal>systemd.debug-shell=1</literal>, of "
"blijvend gemaakt worden met <command>systemctl enable debug-shell</command> "
"(in dat geval moet het weer worden uitgeschakeld wanneer de foutopsporing is "
"voltooid)."

#. type: Content of: <chapter><section><section><section><para>
#: en/upgrading.dbk:214
msgid ""
"More information on debugging a broken boot under systemd can be found in "
"the <ulink url=\"https://freedesktop.org/wiki/Software/systemd/Debugging/\";> "
"Freedesktop.org Diagnosing Boot Problems</ulink> article."
msgstr ""
"Meer informatie over het onderzoeken en repareren van een defect "
"opstartproces onder systemd is te vinden in het artikel van Freedesktop.org "
"over <ulink url=\"https://freedesktop.org/wiki/Software/systemd/Debugging/";
"\"> Diagnosing Boot Problems</ulink>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:223
msgid "Prepare a safe environment for the upgrade"
msgstr "Maak een veilige omgeving klaar voor de opwaardering"

#. type: Content of: <chapter><section><section><important><para>
#: en/upgrading.dbk:226
msgid ""
"If you are using some VPN services (such as <systemitem role=\"package"
"\">tinc</systemitem>) consider that they might not be available throughout "
"the upgrade process. Please see <xref linkend=\"services-downtime\"/>."
msgstr ""
"Indien u bepaalde VPN-diensten (zoals <systemitem role=\"package\">tinc</"
"systemitem>) gebruikt, hou er dan rekening mee dat die mogelijk niet "
"beschikbaar zijn gedurende het opwaarderingsproces. Zie in dat verband <xref "
"linkend=\"services-downtime\"/>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:233
msgid ""
"In order to gain extra safety margin when upgrading remotely, we suggest "
"that you run upgrade processes in the virtual console provided by the "
"<command>screen</command> program, which enables safe reconnection and "
"ensures the upgrade process is not interrupted even if the remote connection "
"process temporarily fails."
msgstr ""
"Om bij het vanop afstand opwaarderen een extra veiligheidsmarge in te "
"bouwen, suggereren we dat u de opwaarderingsprocessen uitvoert in de "
"virtuele console die door het programma <command>screen</command> geleverd "
"wordt. Dit laat toe om op een veilige manier opnieuw verbinding te maken en "
"garandeert dat het opwaarderingsproces niet onderbroken wordt, zelfs als de "
"externe verbinding tijdelijk faalt."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:240
msgid ""
"Users of the watchdog daemon provided by the <systemitem role=\"package"
"\">micro-evtd</systemitem> package should stop the daemon and disable the "
"watchdog timer before the upgrade, to avoid a spurious reboot in the middle "
"of the upgrade process:"
msgstr ""
"Gebruikers van de achtergronddienst watchdog uit het pakket <systemitem role="
"\"package\">micro-evtd</systemitem> moeten voor de opwaardering de "
"achtergronddienst stoppen en de timer van watchdog uitschakelen om een "
"ongepaste herstart middenin de opwaardering te vermijden:"

#. type: Content of: <chapter><section><section><para><screen>
#: en/upgrading.dbk:245
#, no-wrap
msgid ""
"# service micro-evtd stop\n"
"# /usr/sbin/microapl -a system_set_watchdog off\n"
"      "
msgstr ""
"# service micro-evtd stop\n"
"# /usr/sbin/microapl -a system_set_watchdog off\n"
"      "

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:255
msgid "Start from <quote>pure</quote> Debian"
msgstr "Beginnen vanuit <quote>zuiver</quote> Debian"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:257
msgid ""
"The upgrade process described in this chapter has been designed for "
"<quote>pure</quote> Debian stable systems. APT controls what is installed on "
"your system. If your APT configuration mentions additional sources besides "
"&oldreleasename;, or if you have installed packages from other releases or "
"from third parties, then to ensure a reliable upgrade process you may wish "
"to begin by removing these complicating factors."
msgstr ""
"Het opwaarderingsproces dat in dit hoofdstuk beschreven wordt, is "
"uitgetekend voor systemen met een <quote>zuivere</quote> versie van Debian "
"stable. APT stuurt wat er op uw systeem wordt geïnstalleerd. Indien uw "
"configuratie van APT naast &oldreleasename; nog andere pakketbronnen bevat, "
"of indien u pakketten geïnstalleerd heeft van andere releases of van derden, "
"dan zou u kunnen beginnen met het verwijderen van die complicerende factoren "
"om er zeker van te zijn dat het opwaarderingsproces op een betrouwbare wijze "
"verloopt."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:266
msgid ""
"The main configuration file that APT uses to decide what sources it should "
"download packages from is <filename>/etc/apt/sources.list</filename>, but it "
"can also use files in the <filename>/etc/apt/sources.list.d/</filename> "
"directory - for details see <ulink url=\"&url-man;/&releasename;/apt/sources."
"list.5.html\">sources.list(5)</ulink>.  If your system is using multiple "
"source-list files then you will need to ensure they stay consistent."
msgstr ""
"Het primaire configuratiebestand dat gebruikt wordt door APT om uit te maken "
"vanaf welke pakketbronnen pakketten gedownload moeten worden, is <filename>/"
"etc/apt/sources.list</filename>, maar het kan ook gebruik maken van "
"bestanden uit de map <filename>/etc/apt/sources.list.d/</filename>. Zie "
"<ulink url=\"&url-man;/&releasename;/apt/sources.list.5.html\">sources."
"list(5)</ulink> voor details. Indien uw systeem gebruik maakt van meerdere "
"pakketbronbestanden, moet u ervoor zorgen dat deze consistent blijven."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:277
msgid "Upgrade to Debian &oldrelease; (&oldreleasename;)"
msgstr "Opwaarderen naar Debian &oldrelease; (&oldreleasename;)"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:279
msgid ""
"Only upgrades from Debian &oldrelease; (&oldreleasename;) are supported.  "
"Display your Debian version with:"
msgstr ""
"Enkel opwaarderingen vanaf Debian &oldrelease; (&oldreleasename;) worden "
"ondersteund. U kunt uw Debian-versie weergeven met:"

#. type: Content of: <chapter><section><section><para><screen>
#: en/upgrading.dbk:282
#, no-wrap
msgid ""
"$ cat /etc/debian_version\n"
"      "
msgstr ""
"$ cat /etc/debian_version\n"
"      "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:284
msgid ""
"Please follow the instructions in the <ulink url=\"https://www.debian.org/";
"releases/&oldreleasename;/releasenotes\">Release Notes for &debian; "
"&oldrelease;</ulink> to upgrade to &debian; &oldrelease; first if needed."
msgstr ""
"Volg de instructies uit de <ulink url=\"https://www.debian.org/releases/";
"&oldreleasename;/releasenotes\">Notities bij de uitgave van &debian; "
"&oldrelease;</ulink> om eerst naar &debian; &oldrelease; op te waarderen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:292
msgid "Debian Backports"
msgstr "Debian Backports"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:294
msgid ""
"<ulink url=\"&url-debian-backports;\">Debian Backports</ulink> allows users "
"of Debian stable to run more up-to-date versions of packages (with some "
"tradeoffs in testing and security support).  The Debian Backports Team "
"maintains a subset of packages from the next Debian release, adjusted and "
"recompiled for usage on the current Debian stable release."
msgstr ""
"<ulink url=\"&url-debian-backports;\">Debian Backports</ulink> stelt "
"gebruikers van de stabiele uitgave van Debian in staat om actuelere versies "
"van pakketten te gebruiken (met enkele nadelen op het gebied van testen en "
"beveiligingsondersteuning). Het Debian Backports Team onderhoudt een "
"deelverzameling pakketten van de eerstvolgende uitgave van Debian, aangepast "
"en opnieuw gecompileerd om gebruikt te kunnen worden met de huidige stabiele "
"uitgave van Debian."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:302
msgid ""
"Packages from &oldreleasename;-backports have version numbers lower than the "
"version in &releasename;, so they should upgrade normally to &releasename; "
"in the same way as <quote>pure</quote> &oldreleasename; packages during the "
"distribution upgrade.  While there are no known potential issues, the "
"upgrade paths from backports are less tested, and correspondingly incur more "
"risk."
msgstr ""
"Pakketten van &oldreleasename;-backports hebben lagere versienummers dan de "
"versie in &releasename;, zodat ze tijdens de opwaardering van de distributie "
"gewoon opgewaardeerd kunnen worden naar &releasename;, op dezelfde wijze als "
"<quote>zuivere</quote> &oldreleasename; pakketten. Hoewel er geen potentiële "
"problemen bekend zijn, worden opwaarderingstrajecten vanaf backports minder "
"getest en lopen deze dienovereenkomstig een groter risico."

#. type: Content of: <chapter><section><section><caution><para>
#: en/upgrading.dbk:312
msgid ""
"While regular Debian Backports are supported, there is no clean upgrade path "
"from <ulink url=\"&url-debian-backports;Instructions/#index4h2\">sloppy</"
"ulink> backports (which use APT source-list entries referencing "
"&oldreleasename;-backports-sloppy)."
msgstr ""
"Terwijl gewone Debian Backports ondersteund worden, bestaat er geen schoon "
"opwaarderingstraject voor <ulink url=\"&url-debian-backports;Instructions/"
"#index4h2\">sloppy</ulink> backports (waarvoor in sources-list van APT "
"vermeldingen gebruikt worden die verwijzen naar &oldreleasename;-backports-"
"sloppy)."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:320
msgid ""
"As with <xref linkend=\"unofficial-sources\"/>, users are advised to remove "
"&oldreleasename;-backports entries from their APT source-list files before "
"the upgrade.  After it is completed, they may consider adding <ulink url="
"\"&url-debian-backports;Instructions/\">&releasename;-backports</ulink>."
msgstr ""
"Zoals dit het geval is voor <xref linkend=\"unofficial-sources\"/>, wordt "
"gebruikers de raad gegeven om voor de opwaardering vermeldingen van "
"&oldreleasename;-backports te verwijderen uit hun APT source-list-bestanden. "
"Nadat de opwaardering voltooid is, kunnen ze in overweging nemen om <ulink "
"url=\"&url-debian-backports;Instructions/\">&releasename;-backports</ulink> "
"toe te voegen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:327
msgid ""
"For more information, consult the <ulink url=\"&url-wiki;Backports"
"\">Backports Wiki page</ulink>."
msgstr ""
"Raadpleeg voor bijkomende informatie de <ulink url=\"&url-wiki;Backports"
"\">Backports Wiki-pagina</ulink>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:333
msgid "Remove non-Debian packages"
msgstr "Niet-Debianpakketten verwijderen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:335
msgid ""
"Below there are two methods for finding installed packages that did not come "
"from Debian, using either <command>aptitude</command> or <command>apt-"
"forktracer</command>.  Please note that neither of them are 100% accurate (e."
"g. the aptitude example will list packages that were once provided by Debian "
"but no longer are, such as old kernel packages)."
msgstr ""
"Hieronder worden twee methodes aangereikt om geïnstalleerde pakketten te "
"vinden die niet van Debian afkomstig zijn. De ene met <command>aptitude</"
"command> en de andere met <command>apt-forktracer</command>. Houd er "
"rekening mee dat geen van beide 100% accuraat werkt (het voorbeeld met "
"aptitude levert bijvoorbeeld ook pakketten op die ooit door Debian geleverd "
"werden maar nu niet meer, zoals oude kernelpakketten)."

#. type: Content of: <chapter><section><section><para><screen>
#: en/upgrading.dbk:341
#, no-wrap
msgid ""
"$ aptitude search '?narrow(?installed, ?not(?origin(Debian)))'\n"
"$ apt-forktracer | sort\n"
"    "
msgstr ""
"$ aptitude search '?narrow(?installed, ?not(?origin(Debian)))'\n"
"$ apt-forktracer | sort\n"
"    "

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:348
msgid "Upgrade to latest point release"
msgstr "Naar de laatste tussenrelease opwaarderen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:350
msgid ""
"This procedure assumes your system has been updated to the latest point "
"release of &oldreleasename;.  If you have not done this or are unsure, "
"follow the instructions in <xref linkend=\"old-upgrade\"/>."
msgstr ""
"Deze werkwijze veronderstelt dat uw systeem reeds opgewaardeerd is naar de "
"recentste onderversie of tussenrelease (point release) van &oldreleasename;. "
"Is dat nog niet gebeurd of weet u het niet, volg dan de instructies uit "
"<xref linkend=\"old-upgrade\"/>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:357
msgid "Prepare the package database"
msgstr "De pakketdatabank voorbereiden"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:359
msgid ""
"You should make sure the package database is ready before proceeding with "
"the upgrade. If you are a user of another package manager like <systemitem "
"role=\"package\">aptitude</systemitem> or <systemitem role=\"package"
"\">synaptic</systemitem>, review any pending actions. A package scheduled "
"for installation or removal might interfere with the upgrade procedure. Note "
"that correcting this is only possible if your APT source-list files still "
"point to <emphasis>&oldreleasename;</emphasis> and not to <emphasis>stable</"
"emphasis> or <emphasis>&releasename;</emphasis>; see <xref linkend=\"old-"
"sources\"/>."
msgstr ""
"U moet er voor zorgen dat de pakketdatabank klaar is voor u doorgaat met de "
"opwaardering. Indien u een ander programma voor pakketbeheer gebruikt, zoals "
"<systemitem role=\"package\">aptitude</systemitem> of <systemitem role="
"\"package\">synaptic</systemitem>, moet u nakijken of er mogelijk acties in "
"de wachtrij staan. Indien er in het programma voor pakketbeheer ingepland "
"staat dat een pakket geïnstalleerd of verwijderd moet worden, kan dit "
"interfereren met de opwaarderingsprocedure. Merk op dat u dit enkel kunt "
"corrigeren als uw pakketbronbestanden voor APT nog steeds verwijzen naar "
"<emphasis>&oldreleasename;</emphasis> en niet naar <emphasis>stable</"
"emphasis> of <emphasis>&releasename;</emphasis>; zie <xref linkend=\"old-"
"sources\"/>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:373
msgid "Remove obsolete packages"
msgstr "Verouderde pakketten verwijderen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:375
msgid ""
"It is a good idea to <link linkend=\"obsolete\">remove obsolete packages</"
"link> from your system before upgrading.  They may introduce complications "
"during the upgrade process, and can present security risks as they are no "
"longer maintained."
msgstr ""
"Het is een goede praktijk om voor de opwaardering <link linkend=\"obsolete"
"\">verouderde pakketten te verwijderen</link> van uw systeem. Ze kunnen "
"complicaties veroorzaken tijdens het opwaarderingsproces en ze kunnen "
"veiligheidsrisico's inhouden omdat ze niet langer onderhouden worden."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:383
msgid "Clean up leftover configuration files"
msgstr "Overgebleven configuratiebestanden opruimen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:385
msgid ""
"A previous upgrade may have left unused copies of configuration files; <link "
"linkend=\"configuration-changes\">old versions</link> of configuration "
"files, versions supplied by the package maintainers, etc.  Removing leftover "
"files from previous upgrades can avoid confusion.  Find such leftover files "
"with:"
msgstr ""
"Een eerdere upgrade heeft mogelijk ongebruikte kopieën van "
"configuratiebestanden achtergelaten; <link linkend=\"configuration-changes"
"\">oude versies</link> van configuratiebestanden, versies geleverd door de "
"pakketbeheerders, enz. Het verwijderen van overgebleven bestanden van "
"eerdere upgrades kan verwarring voorkomen. Zoek dergelijke overgebleven "
"bestanden met:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:392
#, no-wrap
msgid ""
"# find /etc -name '*.dpkg-*' -o -name '*.ucf-*' -o -name '*.merge-error'\n"
"    "
msgstr ""
"# find /etc -name '*.dpkg-*' -o -name '*.ucf-*' -o -name '*.merge-error'\n"
"    "

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:397
msgid "The proposed-updates section"
msgstr "De archiefafdeling proposed-updates"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:399
msgid ""
"If you have listed the <literal>proposed-updates</literal> section in your "
"APT source-list files, you should remove it before attempting to upgrade "
"your system.  This is a precaution to reduce the likelihood of conflicts."
msgstr ""
"Indien u in uw pakketbronbestanden voor APT de archiefafdeling "
"<literal>proposed-updates</literal> opgenomen heeft, moet u die vermelding "
"verwijderen vooraleer u uw systeem probeert op te waarderen. Dit is een "
"voorzorgsmaatregel om de kans op conflicten te verkleinen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:407
msgid "Unofficial sources"
msgstr "Niet-officiële pakketbronnen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:409
msgid ""
"If you have any non-Debian packages on your system, you should be aware that "
"these may be removed during the upgrade because of conflicting "
"dependencies.  If these packages were installed by adding an extra package "
"archive in your APT source-list files, you should check if that archive also "
"offers packages compiled for &releasename; and change the source item "
"accordingly at the same time as your source items for Debian packages."
msgstr ""
"Als u op uw systeem pakketten heeft die niet van Debian afkomstig zijn, moet "
"u weten dat deze tijdens de opwaardering eventueel verwijderd kunnen worden "
"wegens tegenstrijdige vereisten. Indien deze pakketten geïnstalleerd werden "
"via het toevoegen van een extra pakketarchief in uw pakketbronbestanden voor "
"APT, ga dan na of dat archief ook pakketten aanbiedt die gecompileerd werden "
"voor &releasename; en pas die pakketbronregel dienovereenkomstig aan op "
"hetzelfde moment waarop u de pakketbronregels voor de pakketten van Debian "
"aanpast."

#. type: Content of: <chapter><section><section><para><footnote><para>
#: en/upgrading.dbk:421
msgid ""
"Debian's package management system normally does not allow a package to "
"remove or replace a file owned by another package unless it has been defined "
"to replace that package."
msgstr ""
"Het pakketbeheersysteem van Debian laat normaal niet toe dat een pakket een "
"bestand verwijdert of vervangt dat eigendom is van een ander pakket, tenzij "
"het bedoeld is om dat pakket te vervangen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:418
msgid ""
"Some users may have <emphasis>unofficial</emphasis> backported <quote>newer</"
"quote> versions of packages that <emphasis>are</emphasis> in Debian "
"installed on their &oldreleasename; system.  Such packages are most likely "
"to cause problems during an upgrade as they may result in file "
"conflicts<placeholder type=\"footnote\" id=\"0\"/>.  <xref linkend=\"trouble"
"\"/> has some information on how to deal with file conflicts if they should "
"occur."
msgstr ""
"Het is mogelijk dat sommige gebruikers op hun &oldreleasename;-systeem "
"<quote>recentere</quote> versies hebben, afkomstig van <emphasis>niet-"
"officiële</emphasis> backports (voor de stabiele release geschikt gemaakte "
"recentere softwareversies), van pakketten die <emphasis>wel degelijk</"
"emphasis> in Debian aanwezig zijn. Dergelijke pakketten hebben een grote "
"kans om tijdens de opwaardering voor problemen te zorgen, vermits ze kunnen "
"leiden tot bestandsconflicten<placeholder type=\"footnote\" id=\"0\"/>.  "
"<xref linkend=\"trouble\"/> bevat enig informatie over hoe u met "
"bestandsconflicten kunt omgaan mochten die zich manifesteren."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:431
msgid "Disabling APT pinning"
msgstr "APT-verankering (pinning) uitschakelen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:433
msgid ""
"If you have configured APT to install certain packages from a distribution "
"other than stable (e.g.  from testing), you may have to change your APT "
"pinning configuration (stored in <filename>/etc/apt/preferences</filename> "
"and <filename>/etc/apt/preferences.d/</filename>) to allow the upgrade of "
"packages to the versions in the new stable release.  Further information on "
"APT pinning can be found in <ulink url=\"&url-man;/&releasename;/apt/"
"apt_preferences.5.en.html\">apt_preferences(5)</ulink>."
msgstr ""
"Indien u APT geconfigureerd heeft om bepaalde pakketten te installeren uit "
"een andere distributie dan uit stable (bijvoorbeeld uit testing), zult u de "
"configuratie voor APT pinning (opgeslagen in <filename>/etc/apt/preferences</"
"filename> en <filename>/etc/apt/preferences.d/</filename>) moeten wijzigen "
"om de opwaardering van pakketten naar versies uit de nieuwe stabiele release "
"mogelijk te maken. Bijkomende informatie over APT-verankering (pinning) is "
"te vinden in de man-pagina <ulink url=\"&url-man;/&releasename;/apt/"
"apt_preferences.5.en.html\">apt_preferences(5)</ulink>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:443
msgid "Check package status"
msgstr "De toestand van pakketten controleren"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:445
msgid ""
"Regardless of the method used for upgrading, it is recommended that you "
"check the status of all packages first, and verify that all packages are in "
"an upgradable state.  The following command will show any packages which "
"have a status of Half-Installed or Failed-Config, and those with any error "
"status."
msgstr ""
"Ongeacht de gebruikte methode van opwaarderen is het aanbevolen om eerst de "
"toestand van alle pakketten te controleren en na te gaan of alle pakketten "
"zich in een opwaardeerbare toestand bevinden. Het volgende commando toont "
"pakketten die een status hebben van Half-Installed (gedeeltelijk "
"geïnstalleerd) of Failed-Config (mislukte configuratie) en de pakketten met "
"een foutstatus."

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:451
#, no-wrap
msgid ""
"# dpkg --audit\n"
"    "
msgstr ""
"# dpkg --audit\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:454
msgid ""
"You could also inspect the state of all packages on your system using "
"<command>aptitude</command> or with commands such as"
msgstr ""
"U kunt de toestand van alle pakketten op uw systeem ook controleren met "
"<command>aptitude</command> of met commando's zoals"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:459
#, no-wrap
msgid ""
"# dpkg -l | pager\n"
"    "
msgstr ""
"# dpkg -l | pager\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:462
msgid "or"
msgstr "of"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:465
#, no-wrap
msgid ""
"# dpkg --get-selections \"*\" &gt; ~/curr-pkgs.txt\n"
"    "
msgstr ""
"# dpkg --get-selections \"*\" &gt; ~/curr-pkgs.txt\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:468
msgid ""
"It is desirable to remove any holds before upgrading.  If any package that "
"is essential for the upgrade is on hold, the upgrade will fail."
msgstr ""
"Het is wenselijk om eventuele 'hold'-markeringen (pakketten die gemarkeerd "
"staan als te handhaven in de huidige versie) voor de opwaardering te "
"verwijderen. Indien een pakket dat essentieel is voor de opwaardering als te "
"handhaven gemarkeerd staat, zal de opwaardering mislukken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:472
msgid ""
"Note that <command>aptitude</command> uses a different method for "
"registering packages that are on hold than <command>apt</command> and "
"<command>dselect</command>.  You can identify packages on hold for "
"<command>aptitude</command> with"
msgstr ""
"Merk op dat <command>aptitude</command> een andere methode gebruikt dan "
"<command>apt</command> en <command>dselect</command> om te registreren dat "
"een pakket op de huidige versie gehandhaafd moet worden. U kunt de pakketten "
"die voor <command>aptitude</command> als te handhaven geboekt staan, vinden "
"met"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:478
#, no-wrap
msgid ""
"# aptitude search \"~ahold\" \n"
"    "
msgstr ""
"# aptitude search \"~ahold\" \n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:481
msgid ""
"If you want to check which packages you had on hold for <command>apt</"
"command>, you should use"
msgstr ""
"Wilt u nagaan welke pakketten voor <command>apt</command> als te handhaven "
"ingesteld staan, dan moet u het volgende commando gebruiken"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:485
#, no-wrap
msgid ""
"# dpkg --get-selections | grep 'hold$'\n"
"    "
msgstr ""
"# dpkg --get-selections | grep 'hold$'\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:488
msgid ""
"If you changed and recompiled a package locally, and didn't rename it or put "
"an epoch in the version, you must put it on hold to prevent it from being "
"upgraded."
msgstr ""
"Indien u lokaal een pakket aanpaste en opnieuw compileerde, maar het geen "
"andere naam gaf of geen epoch in het versienummer opnam, dan moet u het "
"markeren als te handhaven (on hold) om te voorkomen dat het opgewaardeerd "
"wordt."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:493
msgid ""
"The <quote>hold</quote> package state for <command>apt</command> can be "
"changed using:"
msgstr ""
"U kunt voor <command>apt</command> de <quote>hold</quote>-status (te "
"handhaven) van een pakket wijzigen met:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:496
#, no-wrap
msgid ""
"# echo <replaceable>package_name</replaceable> hold | dpkg --set-selections\n"
"    "
msgstr ""
"# echo <replaceable>package_name</replaceable> hold | dpkg --set-selections\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:499
msgid ""
"Replace <literal>hold</literal> with <literal>install</literal> to unset the "
"<quote>hold</quote> state."
msgstr ""
"Vervang <literal>hold</literal> door <literal>install</literal> om de "
"<quote>hold</quote>-status (de 'te handhaven'-status) ongedaan te maken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:503
msgid ""
"If there is anything you need to fix, it is best to make sure your APT "
"source-list files still refer to &oldreleasename; as explained in <xref "
"linkend=\"old-sources\"/>."
msgstr ""
"Als er nog iets is dat u moet repareren, is het best om ervoor te zorgen dat "
"uw pakketbronbestanden voor APT nog blijven verwijzen naar &oldreleasename;, "
"zoals uitgelegd werd in <xref linkend=\"old-sources\"/>."

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:512
msgid "Preparing APT source-list files"
msgstr "Pakketbronbestanden voor APT klaarmaken"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:514
msgid ""
"Before starting the upgrade you must reconfigure APT source-list files "
"(<filename>/etc/apt/sources.list</filename> and files under <filename>/etc/"
"apt/sources.list.d/</filename>) to add sources for <literal>&releasename;</"
"literal> and typically to remove sources for <literal>&oldreleasename;</"
"literal>."
msgstr ""
"Voor u met opwaarderen begint moet u de pakketbronbestanden voor APT "
"(<filename>/etc/apt/sources.list</filename> en bestanden onder <filename>/"
"etc/apt/sources.list.d/</filename>) opnieuw configureren om bronnen toe te "
"voegen voor <literal>&releasename;</literal> en normaal ook om bronnen voor "
"<literal>&oldreleasename;</literal> te verwijderen."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:521
msgid ""
"APT will consider all packages that can be found via any configured archive, "
"and install the package with the highest version number, giving priority to "
"the first entry in the files. Thus, if you have multiple mirror locations, "
"list first the ones on local hard disks, then <acronym>CD-ROM</acronym>s, "
"and then remote mirrors."
msgstr ""
"APT houdt rekening met alle pakketten die via een van de geconfigureerde "
"archieven te vinden zijn en installeert het pakket met het hoogste "
"versienummer. Daarbij geeft het voorrang aan het eerste item in de "
"bestanden. Dus indien u gebruik maakt van verschillende "
"spiegelserverlocaties, moet u eerst deze op lokale harde schijven vermelden, "
"dan <acronym>cd</acronym>'s en vervolgens externe spiegelservers."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:529
msgid ""
"A release can often be referred to both by its codename (e.g.  "
"<literal>&oldreleasename;</literal>, <literal>&releasename;</literal>) and "
"by its status name (i.e. <literal>oldstable</literal>, <literal>stable</"
"literal>, <literal>testing</literal>, <literal>unstable</literal>).  "
"Referring to a release by its codename has the advantage that you will never "
"be surprised by a new release and for this reason is the approach taken "
"here.  It does of course mean that you will have to watch out for release "
"announcements yourself.  If you use the status name instead, you will just "
"see loads of updates for packages available as soon as a release has "
"happened."
msgstr ""
"Dikwijls kan naar een uitgave verwezen worden met zijn codenaam (bijv. "
"<literal>&oldreleasename;</literal>, <literal>&releasename;</literal>) en "
"met zijn statusnaam (d.w.z. <literal>oldstable</literal>, <literal>stable</"
"literal>, <literal>testing</literal>, <literal>unstable</literal>). Naar een "
"uitgave verwijzen met de codenaam ervan heeft het voordeel dat u nooit "
"verrast zult worden door een nieuwe uitgave. Om die reden gebruiken we hier "
"deze benadering. Dit betekent natuurlijk dat u zelf zult moeten uitkijken "
"naar de aankondiging van een nieuwe uitgave. Maakt u daarentegen gebruik van "
"de statusnaam, dan zult u van zodra een release plaats vond, merken dat er "
"voor een massa pakketten updates beschikbaar gekomen zijn."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:541
msgid ""
"Debian provides two announcement mailing lists to help you stay up to date "
"on relevant information related to Debian releases:"
msgstr ""
"Debian gebruikt twee mailinglijsten voor het doen van aankondigingen, zodat "
"u op de hoogte kunt blijven van relevante informatie over de releases van "
"Debian:"

#. type: Content of: <chapter><section><para><itemizedlist><listitem><para>
#: en/upgrading.dbk:546
msgid ""
"By <ulink url=\"https://lists.debian.org/debian-announce/\";> subscribing to "
"the Debian announcement mailing list</ulink>, you will receive a "
"notification every time Debian makes a new release.  Such as when "
"<literal>&releasename;</literal> changes from e.g. <literal>testing</"
"literal> to <literal>stable</literal>."
msgstr ""
"Door <ulink url=\"https://lists.debian.org/debian-announce/\";> in te tekenen "
"op de Debian mailinglijst voor aankondigingen</ulink> krijgt u een "
"kennisgeving telkens Debian een nieuwe uitgave brengt. Bijvoorbeeld op het "
"moment dat <literal>&releasename;</literal> van <literal>testing</literal> "
"overgaat naar <literal>stable</literal>."

#. type: Content of: <chapter><section><para><itemizedlist><listitem><para>
#: en/upgrading.dbk:556
msgid ""
"By <ulink url=\"https://lists.debian.org/debian-security-announce/\";> "
"subscribing to the Debian security announcement mailing list</ulink>, you "
"will receive a notification every time Debian publishes a security "
"announcement."
msgstr ""
"Door <ulink url=\"https://lists.debian.org/debian-security-announce/\";> in "
"te tekenen op de Debian mailinglijst voor beveiligingsaankondigingen</ulink> "
"ontvangt u een kennisgeving telkens Debian een beveiligingsaankondiging "
"publiceert."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:566
msgid "Adding APT Internet sources"
msgstr "Op het internet aanwezige pakketbronnen voor APT toevoegen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:568
msgid ""
"On new installations the default is for APT to be set up to use the &debian; "
"APT CDN service, which should ensure that packages are automatically "
"downloaded from a server near you in network terms. As this is a relatively "
"new service, older installations may have configuration that still points to "
"one of the main &debian; Internet servers or one of the mirrors. If you "
"haven't done so yet, it is recommended to switch over to the use of the CDN "
"service in your APT configuration."
msgstr ""
"Op nieuwe installatie is de standaardinstelling dat APT gebruik maakt van de "
"CDN-dienst van &debian;, hetgeen er moet voor zorgen dat pakketten "
"automatisch gedownload worden van een spiegelserver die zich in "
"netwerktermen dicht in de buurt bevindt. Vermits het een relatief recente "
"dienst betreft, is het mogelijk dat in de configuratie van oudere "
"installaties nog steeds verwezen wordt naar een van de centrale "
"internetservers van &debian; of naar een van de spiegelservers. Indien u dit "
"nog niet gedaan heeft, wordt u aangeraden om over te schakelen op het "
"gebruik van de CDN-dienst in uw configuratie van APT."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:577
msgid ""
"To make use of the CDN service, add a line like this to your APT source "
"configuration (assuming you are using <literal>main</literal> and "
"<literal>contrib</literal>):"
msgstr ""
"Om gebruik te maken van de CDN-dienst, moet u een regel zoals deze toevoegen "
"aan uw pakketbronconfiguratie van APT (in de veronderstelling dat u gebruik "
"maakt van <literal>main</literal> en <literal>contrib</literal>):"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:581
#, no-wrap
msgid "deb http://deb.debian.org/debian &releasename; main contrib"
msgstr "deb http://deb.debian.org/debian &releasename; main contrib"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:583
msgid ""
"After adding your new sources, disable the previously existing "
"<quote><literal>deb</literal></quote> lines by placing a hash sign "
"(<literal>#</literal>) in front of them."
msgstr ""
"Nadat u de nieuwe pakketbronnen toegevoegd heeft, moet u de eerdere "
"<quote><literal>deb</literal></quote>-regels deactiveren door er een hash-"
"teken (<literal>#</literal>) voor te plaatsen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:588
msgid ""
"However, if you get better results using a specific mirror that is close to "
"you in network terms, this option is still available."
msgstr ""
"Indien u echter betere resultaten bekomt door een specifieke spiegelserver "
"te gebruiken die in netwerktermen dicht bij u in de buurt is, heeft u nog "
"steeds die mogelijkheid."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:592
msgid ""
"Debian mirror addresses can be found at <ulink url=\"&url-debian-mirrors;"
"\"></ulink> (look at the <quote>list of Debian mirrors</quote> section)."
msgstr ""
"De adressen van Debian spiegelservers zijn te vinden op <ulink url=\"&url-"
"debian-mirrors;\"></ulink> (kijk bij de paragraaf met als titel <quote>Lijst "
"van Debian spiegelservers</quote>)."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:597
msgid ""
"For example, suppose your closest Debian mirror is <literal>&url-debian-"
"mirror-eg;</literal>.  If you inspect that mirror with a web browser, you "
"will notice that the main directories are organized like this:"
msgstr ""
"Bijvoorbeeld, veronderstel dat de dichtstbijzijnde Debian spiegelserver "
"<literal>&url-debian-mirror-eg;</literal> is. Als u op deze spiegelserver "
"met een webbrowser gaat kijken, dan zult u merken dat de hoofdmappen op de "
"volgende manier georganiseerd zijn:"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:603
#, no-wrap
msgid ""
"&url-debian-mirror-eg;/debian/dists/&releasename;/main/binary-&architecture;/...\n"
"&url-debian-mirror-eg;/debian/dists/&releasename;/contrib/binary-&architecture;/...\n"
"    "
msgstr ""
"&url-debian-mirror-eg;/debian/dists/&releasename;/main/binary-&architecture;/...\n"
"&url-debian-mirror-eg;/debian/dists/&releasename;/contrib/binary-&architecture;/...\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:607
msgid ""
"To configure APT to use a given mirror, add a line like this (again, "
"assuming you are using <literal>main</literal> and <literal>contrib</"
"literal>):"
msgstr ""
"Om APT in te stellen op het gebruik van een specifieke spiegelserver, moet u "
"een regel als deze toevoegen (opnieuw in de veronderstelling dat u gebruik "
"maakt van <literal>main</literal> en <literal>contrib</literal>):"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:611
#, no-wrap
msgid "deb &url-debian-mirror-eg;/debian &releasename; main contrib"
msgstr "deb &url-debian-mirror-eg;/debian &releasename; main contrib"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:613 en/upgrading.dbk:643
msgid ""
"Note that the <quote><literal>dists</literal></quote> is added implicitly, "
"and the arguments after the release name are used to expand the path into "
"multiple directories."
msgstr ""
"Merk op dat <quote><literal>dists</literal></quote> impliciet toegevoegd "
"wordt en dat de argumenten na de naam van de release gebruikt worden om het "
"pad uit te breiden tot meerdere mappen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:617
msgid ""
"Again, after adding your new sources, disable the previously existing "
"archive entries."
msgstr ""
"Opnieuw moet u na het toevoegen van de nieuwe pakketbronnen de voorheen "
"bestaande archiefregels uitschakelen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:623
msgid "Adding APT sources for a local mirror"
msgstr "APT-pakketbronnen van een lokale spiegelserver toevoegen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:625
msgid ""
"Instead of using remote package mirrors, you may wish to modify the APT "
"source-list files to use a mirror on a local disk (possibly mounted over "
"<acronym>NFS</acronym>)."
msgstr ""
"In plaats van externe pakketspiegelservers te gebruiken, kunt u de "
"pakketbronbestanden voor APT ook instellen om gebruik te maken van een "
"spiegelserver op een lokale harde schijf (mogelijk aangekoppeld over "
"<acronym>NFS</acronym>)."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:630
msgid ""
"For example, your package mirror may be under <filename>/var/local/debian/</"
"filename>, and have main directories like this:"
msgstr ""
"Bijvoorbeeld, uw pakketspiegelserver bevindt zich onder <filename>/var/local/"
"debian/</filename> en heeft de volgende hoofdmappen:"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:634
#, no-wrap
msgid ""
"/var/local/debian/dists/&releasename;/main/binary-&architecture;/...\n"
"/var/local/debian/dists/&releasename;/contrib/binary-&architecture;/...\n"
"    "
msgstr ""
"/var/local/debian/dists/&releasename;/main/binary-&architecture;/...\n"
"/var/local/debian/dists/&releasename;/contrib/binary-&architecture;/...\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:638
msgid ""
"To use this with <systemitem role=\"package\">apt</systemitem>, add this "
"line to your <filename>sources.list</filename> file:"
msgstr ""
"Om met <systemitem role=\"package\">apt</systemitem> van deze spiegelserver "
"gebruik te maken, voegt u deze regel toe aan het bestand <filename>sources."
"list</filename>:"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:641
#, no-wrap
msgid "deb file:/var/local/debian &releasename; main contrib"
msgstr "deb file:/var/local/debian &releasename; main contrib"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:647
msgid ""
"After adding your new sources, disable the previously existing archive "
"entries in the APT source-list files by placing a hash sign (<literal>#</"
"literal>) in front of them."
msgstr ""
"Nadat u de nieuwe pakketbronnen toegevoegd heeft, moet u de eerder bestaande "
"archiefitems in de pakketbronbestanden voor APT deactiveren door er een hash-"
"teken (<literal>#</literal>) voor te plaatsen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:654
msgid "Adding APT sources from optical media"
msgstr "APT-pakketbronnen van optische media toevoegen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:656
msgid ""
"If you want to use <emphasis>only</emphasis> DVDs (or CDs or Blu-ray Discs), "
"comment out the existing entries in all the APT source-list files by placing "
"a hash sign (<literal>#</literal>) in front of them."
msgstr ""
"Indien u <emphasis>enkel</emphasis> dvd's (of cd's of blu-raydiscs) wenst te "
"gebruiken, moet u de bestaande items in alle pakketbronbestanden voor APT "
"deactiveren door er een hash-teken (<literal>#</literal>) voor te plaatsen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:661
msgid ""
"Make sure there is a line in <filename>/etc/fstab</filename> that enables "
"mounting your CD-ROM drive at the <filename>/media/cdrom</filename> mount "
"point.  For example, if <filename>/dev/sr0</filename> is your CD-ROM drive, "
"<filename>/etc/fstab</filename> should contain a line like:"
msgstr ""
"Controleer of <filename>/etc/fstab</filename> een regel bevat die het "
"mogelijk maakt om uw cd-station aan te koppelen aan het aankoppelpunt "
"<filename>/media/cdrom</filename>. Indien bijvoorbeeld <filename>/dev/sr0</"
"filename> uw cd-station is, moet <filename>/etc/fstab</filename> een regel "
"bevatten zoals deze:"

#. type: Content of: <chapter><section><section><programlisting>
#: en/upgrading.dbk:668
#, no-wrap
msgid ""
"/dev/sr0 /media/cdrom auto noauto,ro 0 0\n"
"    "
msgstr ""
"/dev/sr0 /media/cdrom auto noauto,ro 0 0\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:671
msgid ""
"Note that there must be <emphasis>no spaces</emphasis> between the words "
"<literal>noauto,ro</literal> in the fourth field."
msgstr ""
"Merk op dat er <emphasis>geen spaties</emphasis> mogen staan tussen de "
"woorden <literal>noauto,ro</literal> in het vierde veld."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:675
msgid "To verify it works, insert a CD and try running"
msgstr ""
"Om na te gaan of het werkt, kunt u een cd in het station plaatsen en de "
"volgende commando's uitvoeren:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:678
#, no-wrap
msgid ""
"# mount /media/cdrom    # this will mount the CD to the mount point\n"
"# ls -alF /media/cdrom  # this should show the CD's root directory\n"
"# umount /media/cdrom   # this will unmount the CD\n"
"    "
msgstr ""
"# mount /media/cdrom    # hiermee koppelt u de cd aan het aankoppelpunt aan\n"
"# ls -alF /media/cdrom  # dit moet de inhoud tonen van de basismap van de cd\n"
"# umount /media/cdrom   # hiermee ontkoppelt u de cd opnieuw\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:683
msgid "Next, run:"
msgstr "Voer vervolgens het volgende commando uit:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:686
#, no-wrap
msgid ""
"# apt-cdrom add\n"
"    "
msgstr ""
"# apt-cdrom add\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:689
msgid ""
"for each Debian Binary CD-ROM you have, to add the data about each CD to "
"APT's database."
msgstr ""
"voor elke cd met Debian-pakketten waarover u beschikt, om zo de gegevens "
"over elke cd toe te voegen aan de databank van APT."

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:697
msgid "Upgrading packages"
msgstr "Pakketten opwaarderen"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:699
msgid ""
"The recommended way to upgrade from previous &debian; releases is to use the "
"package management tool <command>apt</command>."
msgstr ""
"De aanbevolen wijze om op te waarderen vanaf eerdere releases van &debian;, "
"is het pakketbeheergereedschap <command>apt</command> gebruiken."

#. type: Content of: <chapter><section><note><para>
#: en/upgrading.dbk:704
msgid ""
"<command>apt</command> is meant for interactive use, and should not be used "
"in scripts. In scripts one should use <command>apt-get</command>, which has "
"a stable output better suitable for parsing."
msgstr ""
"<command>apt</command> is bedoeld voor interactief gebruik en zou niet mogen "
"gebruikt worden in scripts. In scripts moet men <command>apt-get</command> "
"gebruiken, dat een stabiele uitvoer heeft welke beter geschikt is voor "
"verwerking."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:710
msgid ""
"Don't forget to mount all needed partitions (notably the root and <filename>/"
"usr</filename> partitions) read-write, with a command like:"
msgstr ""
"Vergeet niet alle partities die nodig zijn (in het bijzonder de root-"
"partitie en de <filename>/usr</filename>-partitie), aan te koppelen voor "
"lezen en schrijven met een commando zoals:"

#. type: Content of: <chapter><section><screen>
#: en/upgrading.dbk:714
#, no-wrap
msgid ""
"# mount -o remount,rw /<replaceable>mountpoint</replaceable>\n"
"  "
msgstr ""
"# mount -o remount,rw /<replaceable>aankoppelpunt</replaceable>\n"
"  "

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:717
msgid ""
"Next you should double-check that the APT source entries (in <filename>/etc/"
"apt/sources.list</filename> and files under <filename>/etc/apt/sources.list."
"d/</filename>) refer either to <quote><literal>&releasename;</literal></"
"quote> or to <quote><literal>stable</literal></quote>.  There should not be "
"any sources entries pointing to &oldreleasename;."
msgstr ""
"Nadien moet u zeker nog eens controleren of de vermeldingen van de "
"pakketbronnen voor APT (in <filename>/etc/apt/sources.list</filename> en in "
"de bestanden in <filename>/etc/apt/sources.list.d/</filename>) ofwel "
"verwijzen naar <quote><literal>&releasename;</literal></quote> of naar "
"<quote><literal>stable</literal></quote>. Er zouden geen "
"pakketbronvermeldingen mogen verwijzen naar &oldreleasename;."

#. type: Content of: <chapter><section><para><note><para>
#: en/upgrading.dbk:725
msgid ""
"Source lines for a CD-ROM might sometimes refer to <quote><literal>unstable</"
"literal></quote>; although this may be confusing, you should <emphasis>not</"
"emphasis> change it."
msgstr ""
"Regels waarin een cd als pakketbron functioneert, verwijzen soms naar "
"<quote><literal>unstable</literal></quote>. Hoewel dit voor verwarring "
"zorgt, mag u deze regel <emphasis>niet</emphasis> aanpassen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:733
msgid "Recording the session"
msgstr "De sessie opnemen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:735
msgid ""
"It is strongly recommended that you use the <command>/usr/bin/script</"
"command> program to record a transcript of the upgrade session.  Then if a "
"problem occurs, you will have a log of what happened, and if needed, can "
"provide exact information in a bug report.  To start the recording, type:"
msgstr ""
"Het wordt sterk aanbevolen dat u het programma <command>/usr/bin/script</"
"command> gebruikt om een transcriptie te maken van de opwaarderingssessie. "
"Als er zich dan een probleem voordoet, zult u een logboekbestand hebben met "
"een beschrijving van wat er gebeurde en kunt u zo nodig exacte informatie "
"geven in een bugrapport. Om het opnemen te starten, typt u:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:741
#, no-wrap
msgid ""
"# script -t 2&gt;~/upgrade-&releasename;<replaceable>step</replaceable>.time -a ~/upgrade-&releasename;<replaceable>step</replaceable>.script\n"
"    "
msgstr ""
"# script -t 2&gt;~/upgrade-&releasename;<replaceable>stap</replaceable>.time -a ~/upgrade-&releasename;<replaceable>stap</replaceable>.script\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:744
msgid ""
"or similar. If you have to rerun the typescript (e.g. if you have to reboot "
"the system) use different <replaceable>step</replaceable> values to indicate "
"which step of the upgrade you are logging. Do not put the typescript file in "
"a temporary directory such as <filename>/tmp</filename> or <filename>/var/"
"tmp</filename> (files in those directories may be deleted during the upgrade "
"or during any restart)."
msgstr ""
"of iets dergelijks. Indien u het script opnieuw moet starten (bijv. als u "
"het systeem moet herstarten), gebruik dan andere waarden voor "
"<replaceable>stap</replaceable> om een aanduiding te hebben over voor welke "
"stap in het opwaarderingsproces u een logboekbestand aanmaakt. Laat het "
"script zijn logboekbestand niet in een tijdelijke map, zoals <filename>/tmp</"
"filename> of <filename>/var/tmp</filename> plaatsen (bestanden in deze "
"mappen kunnen verwijderd worden tijdens de opwaardering of bij een herstart "
"van de computer)."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:752
msgid ""
"The typescript will also allow you to review information that has scrolled "
"off-screen.  If you are at the system's console, just switch to VT2 (using "
"<keycombo action='simul'><keycap>Alt</keycap><keycap>F2</keycap></"
"keycombo>)  and, after logging in, use <literal>less -R ~root/upgrade-"
"&releasename;.script</literal> to view the file."
msgstr ""
"De transcriptie zal u ook de mogelijkheid bieden om informatie na te kijken "
"die tijdens de opwaardering over het scherm wegscrolde. Als u zich aan de "
"console van het systeem bevindt, moet u gewoon overschakelen naar VT2 (met "
"<keycombo action='simul'><keycap>Alt</keycap><keycap>F2</keycap></keycombo>) "
"en nadat u aangemeld bent, het commando <literal>less -R ~root/upgrade-"
"&releasename;.script</literal> gebruiken om het bestand in te kijken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:760
msgid ""
"After you have completed the upgrade, you can stop <command>script</command> "
"by typing <literal>exit</literal> at the prompt."
msgstr ""
"Nadat u de opwaardering afgerond heeft, kunt u het programma "
"<command>script</command> stoppen door aan de prompt <literal>exit</literal> "
"te typen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:765
msgid ""
"<command>apt</command> will also log the changed package states in "
"<filename>/var/log/apt/history.log</filename> and the terminal output in "
"<filename>/var/log/apt/term.log</filename>. <command>dpkg</command> will, in "
"addition, log all package state changes in <filename>/var/log/dpkg.log</"
"filename>. If you use <command>aptitude</command>, it will also log state "
"changes in <filename>/var/log/aptitude</filename>."
msgstr ""
"<command>apt</command> zal ook een logboek bijhouden van de gewijzigde "
"toestand van pakketten in <filename>/var/log/apt/history.log</filename> en "
"van de uitvoer naar de terminal in <filename>/var/log/apt/term.log</"
"filename>. <command>dpkg</command> zal daarenboven een logboek van alle "
"wijzigingen aan de toestand van pakketten bijhouden in <filename>/var/log/"
"dpkg.log</filename>. Indien u <command>aptitude</command> gebruikt, zal ook "
"dit programma een logboek van de wijzigingen bijhouden in <filename>/var/log/"
"aptitude</filename>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:774
msgid ""
"If you have used the <emphasis>-t</emphasis> switch for <command>script</"
"command> you can use the <command>scriptreplay</command> program to replay "
"the whole session:"
msgstr ""
"Indien u het programma <command>script</command> met de schakeloptie "
"<emphasis>-t</emphasis> gebruikte, kunt u het programma "
"<command>scriptreplay</command> gebruiken om de hele sessie opnieuw af te "
"spelen:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:779
#, no-wrap
msgid ""
"# scriptreplay ~/upgrade-&releasename;<replaceable>step</replaceable>.time ~/upgrade-&releasename;<replaceable>step</replaceable>.script\n"
"    "
msgstr ""
"# scriptreplay ~/upgrade-&releasename;<replaceable>step</replaceable>.time ~/upgrade-&releasename;<replaceable>step</replaceable>.script\n"
"    "

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:784
msgid "Updating the package list"
msgstr "De pakketlijst bijwerken"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:786
msgid ""
"First the list of available packages for the new release needs to be "
"fetched.  This is done by executing:"
msgstr ""
"Eerst moet de lijst met beschikbare pakketten uit de nieuwe uitgave "
"opgehaald worden. Dit gebeurt met het volgende commando:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:790
#, no-wrap
msgid ""
"# apt update\n"
"    "
msgstr ""
"# apt update\n"
"    "

#. type: Content of: <chapter><section><section><note><para>
#: en/upgrading.dbk:794
msgid ""
"Users of apt-secure may find issues when using <command>aptitude</command> "
"or <command>apt-get</command>. For apt-get, you can use <command>apt-get "
"update --allow-releaseinfo-change</command>."
msgstr ""
"Gebruikers van apt-secure kunnen problemen ondervinden wanneer ze "
"<command>aptitude</command> of <command>apt-get</command> gebruiken. Voor "
"apt-get kunt u <command>apt-get update --allow-releaseinfo-change</command> "
"gebruiken."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:803
msgid "Make sure you have sufficient space for the upgrade"
msgstr "Zorg voor voldoende vrije schijfruimte voor de opwaardering"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:805
msgid ""
"You have to make sure before upgrading your system that you will have "
"sufficient hard disk space when you start the full system upgrade described "
"in <xref linkend=\"upgrading-full\"/>.  First, any package needed for "
"installation that is fetched from the network is stored in <filename>/var/"
"cache/apt/archives</filename> (and the <filename>partial/</filename> "
"subdirectory, during download), so you must make sure you have enough space "
"on the file system partition that holds <filename>/var/</filename> to "
"temporarily download the packages that will be installed in your system.  "
"After the download, you will probably need more space in other file system "
"partitions in order to both install upgraded packages (which might contain "
"bigger binaries or more data) and new packages that will be pulled in for "
"the upgrade.  If your system does not have sufficient space you might end up "
"with an incomplete upgrade that is difficult to recover from."
msgstr ""
"Vooraleer u uw systeem opwaardeert moet u ervoor zorgen dat u voldoende "
"vrije schijfruimte zult hebben als u begint aan de fase van volledige "
"opwaardering van het systeem, welke beschreven wordt in <xref linkend="
"\"upgrading-full\"/>. Eerst worden alle pakketten die geïnstalleerd moeten "
"worden en die over het netwerk opgehaald moeten worden, opgeslagen in "
"<filename>/var/cache/apt/archives</filename> (en, tijdens het downloaden, in "
"de onderliggende map <filename>partial/</filename>). Daarom moet u de "
"zekerheid hebben dat u op de bestandssysteempartitie waarop <filename>/var/</"
"filename> zich bevindt, voldoende ruimte beschikbaar heeft om tijdelijk de "
"pakketten die op uw systeem geïnstalleerd zullen worden, ernaartoe te "
"downloaden. Nadat het downloaden afgelopen is, zult u vermoedelijk ook op "
"andere bestandssysteempartities extra ruimte nodig hebben, niet enkel om de "
"pakketten die opgewaardeerd worden te installeren (waarvan de uitvoerbare "
"bestanden of de bestanden met data mogelijk groter zijn), maar ook voor het "
"installeren van nieuwe pakketten die ten gevolge van de opwaardering "
"noodzakelijk geworden zijn. Als uw systeem niet voldoende schijfruimte "
"beschikbaar heeft, kunt u eindigen met een niet volledig opgewaardeerd "
"systeem dat nog moeilijk te repareren valt."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:821
msgid ""
"<command>apt</command> can show you detailed information about the disk "
"space needed for the installation.  Before executing the upgrade, you can "
"see this estimate by running:"
msgstr ""
"<command>apt</command> kan u gedetailleerde informatie geven over de "
"schijfruimte die voor de installatie vereist is. Voor u met de opwaardering "
"start, kunt u daarvan een schatting krijgen met het commando:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:826
#, no-wrap
msgid ""
"# apt -o APT::Get::Trivial-Only=true full-upgrade\n"
"[ ... ]\n"
"XXX upgraded, XXX newly installed, XXX to remove and XXX not upgraded.\n"
"Need to get xx.xMB of archives. \n"
"After this operation, AAAMB of additional disk space will be used.\n"
"    "
msgstr ""
"# apt -o APT::Get::Trivial-Only=true full-upgrade\n"
"[ ... ]\n"
"XXX opgewaardeerd, XXX nieuw geïnstalleerd, XXX te verwijderen en XXX niet opgewaardeerd.\n"
"Moet xx.xMB archieven ophalen. \n"
"Na deze operatie zal AAAMB bijkomende schijfruimte gebruikt worden.\n"
"    "

#. type: Content of: <chapter><section><section><note><para>
#: en/upgrading.dbk:834
msgid ""
"Running this command at the beginning of the upgrade process may give an "
"error, for the reasons described in the next sections.  In that case you "
"will need to wait until you've done the minimal system upgrade as in <xref "
"linkend=\"minimal-upgrade\"/> before running this command to estimate the "
"disk space."
msgstr ""
"Als u dit commando uitvoert bij de aanvang van het opwaarderingsproces, kunt "
"u een foutmelding krijgen omwille van de redenen die in de paragrafen hierna "
"beschreven worden. In een dergelijk geval zult u moeten wachten tot na de "
"minimale opwaardering van het systeem, zoals beschreven in <xref linkend="
"\"minimal-upgrade\"/>, om dit commando uit te voeren en het de vereiste "
"schijfruimte te laten schatten."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:843
msgid ""
"If you do not have enough space for the upgrade, <command>apt</command> will "
"warn you with a message like this:"
msgstr ""
"Indien u onvoldoende vrije ruimte voor de opwaardering heeft, zal "
"<command>apt</command> u met een melding zoals deze waarschuwen:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:847
#, no-wrap
msgid ""
"E: You don't have enough free space in /var/cache/apt/archives/.\n"
"    "
msgstr ""
"E: U heeft onvoldoende vrije ruimte in /var/cache/apt/archives/.\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:850
msgid "In this situation, make sure you free up space beforehand.  You can:"
msgstr ""
"Als die situatie zich voordoet, moet u vooraf voldoende vrije ruimte maken. "
"U kunt:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:856
msgid ""
"Remove packages that have been previously downloaded for installation (at "
"<filename>/var/cache/apt/archives</filename>).  Cleaning up the package "
"cache by running <command>apt clean</command> will remove all previously "
"downloaded package files."
msgstr ""
"Pakketten verwijderen die vroeger werden gedownload om geïnstalleerd te "
"worden (in <filename>/var/cache/apt/archives</filename>). Als u de "
"pakketcache opruimt met het commando <command>apt clean</command>, zullen "
"alle eerder gedownloade pakketbestanden verwijderd worden."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:864
msgid ""
"Remove forgotten packages.  If you have used <command>aptitude</command> or "
"<command>apt</command> to manually install packages in &oldreleasename; it "
"will have kept track of those packages you manually installed, and will be "
"able to mark as redundant those packages pulled in by dependencies alone "
"which are no longer needed due to a package being removed. They will not "
"mark for removal packages that you manually installed. To remove "
"automatically installed packages that are no longer used, run:"
msgstr ""
"Vergeten pakketten verwijderen. Indien u <command>aptitude</command> of "
"<command>apt</command> gebruikte om in &oldreleasename; handmatig pakketten "
"te installeren, zullen die gereedschappen bijgehouden hebben dat u die "
"pakketten handmatig installeerde. Deze programma's voor pakketbeheer zijn in "
"staat om pakketten, die enkel geïnstalleerd werden omdat ze door andere "
"pakketten vereist werden, als overbodig te markeren, wanneer de pakketten "
"die aan hen behoefte hadden, zelf verwijderd werden. Maar pakketten die u "
"handmatig installeerde, zullen zij nooit als te verwijderen markeren. Om "
"automatisch geïnstalleerde pakketten die niet langer gebruikt worden te "
"verwijderen, geeft u het commando:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><screen>
#: en/upgrading.dbk:874
#, no-wrap
msgid ""
"# apt autoremove\n"
"        "
msgstr ""
"# apt autoremove\n"
"        "

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:877
msgid ""
"You can also use <command>deborphan</command>, <command>debfoster</command>, "
"or <command>cruft</command> to find redundant packages.  Do not blindly "
"remove the packages these tools present, especially if you are using "
"aggressive non-default options that are prone to false positives.  It is "
"highly recommended that you manually review the packages suggested for "
"removal (i.e.  their contents, sizes, and descriptions)  before you remove "
"them."
msgstr ""
"U kunt ook <command>deborphan</command>, <command>debfoster</command> of "
"<command>cruft</command> gebruiken om overbodige pakketten op te sporen. "
"Verwijder niet blindweg alle pakketten die door deze programma's voorgesteld "
"worden, zeker als u ze gebruikt met opties die niet standaard zijn en "
"agressief zijn en die de kans op valse positieven vergroten. Het wordt sterk "
"aangeraden om handmatig de pakketten te onderzoeken (d.w.z. hun inhoud, "
"grootte en beschrijving) waarvan deze programma's de verwijdering "
"voorstellen, vooraleer ze daadwerkelijk te verwijderen."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:888
msgid ""
"Remove packages that take up too much space and are not currently needed "
"(you can always reinstall them after the upgrade).  If you have <systemitem "
"role=\"package\">popularity-contest</systemitem> installed, you can use "
"<command>popcon-largest-unused</command> to list the packages you do not use "
"that occupy the most space.  You can find the packages that just take up the "
"most disk space with <command>dpigs</command> (available in the <systemitem "
"role=\"package\">debian-goodies</systemitem> package) or with "
"<command>wajig</command> (running <literal>wajig size</literal>).  They can "
"also be found with <systemitem role=\"package\">aptitude</systemitem>.  "
"Start <command>aptitude</command> in full-terminal mode, select "
"<menuchoice><guimenu>Views</guimenu><guimenuitem>New Flat Package List</"
"guimenuitem></menuchoice>, press <keycap>l</keycap> and enter <literal>~i</"
"literal>, then press <keycap>S</keycap> and enter <literal>~installsize</"
"literal>.  This will give you a handy list to work with."
msgstr ""
"Verwijder pakketten die teveel ruimte in beslag nemen en die momenteel niet "
"nodig zijn (u kunt ze altijd opnieuw installeren na de opwaardering). Indien "
"u <systemitem role=\"package\">popularity-contest</systemitem> installeerde, "
"kunt u het commando <command>popcon-largest-unused</command> gebruiken voor "
"een lijst van niet gebruikte pakketten die de meeste ruimte in beslag nemen. "
"Om gewoon te weten welke pakketten de meeste schijfruimte in beslag nemen, "
"kunt u het commando <command>dpigs</command> (uit het pakket <systemitem "
"role=\"package\">debian-goodies</systemitem>) gebruiken of <command>wajig</"
"command> (met het commando <literal>wajig size</literal>). Ook met "
"<systemitem role=\"package\">aptitude</systemitem> kunt u ze vinden. Start "
"<command>aptitude</command> in volledige-terminalmodus, selecteer "
"<menuchoice><guimenu>Weergaven</guimenu><guimenuitem>Nieuwe Vlakke "
"Pakketlijst</guimenuitem></menuchoice>, druk op <keycap>l</keycap> en voer "
"<literal>~i</literal> in, druk daarna op <keycap>S</keycap> en voer "
"<literal>~installsize</literal> in. Dit zal u een lijst geven waarmee u op "
"een handige manier kunt werken."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:908
msgid ""
"Remove translations and localization files from the system if they are not "
"needed.  You can install the <systemitem role=\"package\">localepurge</"
"systemitem> package and configure it so that only a few selected locales are "
"kept in the system. This will reduce the disk space consumed at <filename>/"
"usr/share/locale</filename>."
msgstr ""
"Verwijder vertalingen en taaldefinitiebestanden van het systeem als ze niet "
"nodig zijn. U kunt het pakket <systemitem role=\"package\">localepurge</"
"systemitem> installeren en het zo configureren dat enkel een paar "
"geselecteerde taaldefinities behouden worden op het systeem. Hierdoor zult u "
"de schijfruimte die door <filename>/usr/share/locale</filename> gebruikt "
"wordt, beperken."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:918
msgid ""
"Temporarily move to another system, or permanently remove, system logs "
"residing under <filename>/var/log/</filename>."
msgstr ""
"Verplaats de systeemlogboekbestanden onder <filename>/var/log/</filename> "
"tijdelijk naar een ander systeem of verwijder ze definitief."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:925
msgid ""
"Use a temporary <filename>/var/cache/apt/archives</filename>: You can use a "
"temporary cache directory from another filesystem (<acronym>USB</acronym> "
"storage device, temporary hard disk, filesystem already in use, ...)."
msgstr ""
"Gebruik een tijdelijke <filename>/var/cache/apt/archives</filename>: u kunt "
"een tijdelijke cachemap gebruiken op een ander bestandssysteem "
"(<acronym>USB</acronym>-opslagapparaat, een tijdelijke harde schijf, een "
"bestandssysteem dat al in gebruik is, ...)"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><note><para>
#: en/upgrading.dbk:932
msgid ""
"Do not use an <acronym>NFS</acronym> mount as the network connection could "
"be interrupted during the upgrade."
msgstr ""
"Gebruik geen bestandssysteem dat via <acronym>NFS</acronym> aangekoppeld is, "
"aangezien de netwerkverbinding tijdens de opwaardering onderbroken kan "
"worden."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:937
msgid ""
"For example, if you have a <acronym>USB</acronym> drive mounted on "
"<filename>/media/usbkey</filename>:"
msgstr ""
"Indien u bijvoorbeeld een <acronym>USB</acronym>-schijf aangekoppeld heeft "
"op <filename>/media/usbkey</filename>:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
#: en/upgrading.dbk:941
msgid ""
"remove the packages that have been previously downloaded for installation:"
msgstr ""
"verwijder de pakketten die eerder gedownload werden met het oog op "
"installatie:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
#: en/upgrading.dbk:945
#, no-wrap
msgid ""
"# apt clean\n"
"                "
msgstr ""
"# apt clean\n"
"                "

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
#: en/upgrading.dbk:951
msgid ""
"copy the directory <filename>/var/cache/apt/archives</filename> to the "
"<acronym>USB</acronym> drive:"
msgstr ""
"kopieer de map <filename>/var/cache/apt/archives</filename> naar de "
"<acronym>USB</acronym>-schijf:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
#: en/upgrading.dbk:956
#, no-wrap
msgid ""
"# cp -ax /var/cache/apt/archives /media/usbkey/\n"
"                "
msgstr ""
"# cp -ax /var/cache/apt/archives /media/usbkey/\n"
"                "

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
#: en/upgrading.dbk:962
msgid "mount the temporary cache directory on the current one:"
msgstr "koppel de tijdelijke cachemap aan op de huidige:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
#: en/upgrading.dbk:965
#, no-wrap
msgid ""
"# mount --bind /media/usbkey/archives /var/cache/apt/archives\n"
"                "
msgstr ""
"# mount --bind /media/usbkey/archives /var/cache/apt/archives\n"
"                "

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
#: en/upgrading.dbk:971
msgid ""
"after the upgrade, restore the original <filename>/var/cache/apt/archives</"
"filename> directory:"
msgstr ""
"herstel na de opwaardering de originele <filename>/var/cache/apt/archives</"
"filename>-map:"

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para><screen>
#: en/upgrading.dbk:975
#, no-wrap
msgid ""
"# umount /var/cache/apt/archives\n"
"                "
msgstr ""
"# umount /var/cache/apt/archives\n"
"                "

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para><orderedlist><listitem><para>
#: en/upgrading.dbk:981
msgid "remove the remaining <filename>/media/usbkey/archives</filename>."
msgstr ""
"verwijder de achtergebleven <filename>/media/usbkey/archives</filename>."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:985
msgid ""
"You can create the temporary cache directory on whatever filesystem is "
"mounted on your system."
msgstr ""
"U kunt de tijdelijke cachemap aanmaken op om het even welk bestandssysteem "
"dat aan uw systeem aangekoppeld is."

#. type: Content of: <chapter><section><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:992
msgid ""
"Do a minimal upgrade of the system (see <xref linkend=\"minimal-upgrade\"/"
">)  or partial upgrades of the system followed by a full upgrade.  This will "
"make it possible to upgrade the system partially, and allow you to clean the "
"package cache before the full upgrade."
msgstr ""
"Voer een minimale opwaardering van het systeem uit (zie <xref linkend="
"\"minimal-upgrade\"/>) of partiële opwaarderingen gevolgd door een volledige "
"opwaardering. Dit maakt het mogelijk om het systeem gedeeltelijk op te "
"waarderen en de pakketcache leeg te maken vooraleer de volledige "
"opwaardering uit te voeren."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1003
msgid ""
"Note that in order to safely remove packages, it is advisable to switch your "
"APT source-list files back to &oldreleasename; as described in <xref linkend="
"\"old-sources\"/>."
msgstr ""
"Merk op dat om het verwijderen van pakketten veilig te laten verlopen, het "
"aangeraden is om uw pakketbronbestanden voor APT terug in te stellen op "
"&oldreleasename;, zoals beschreven wordt in <xref linkend=\"old-sources\"/>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1010
msgid "Minimal system upgrade"
msgstr "Een minimale opwaardering van het systeem"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1012
msgid ""
"In some cases, doing the full upgrade (as described below) directly might "
"remove large numbers of packages that you will want to keep.  We therefore "
"recommend a two-part upgrade process: first a minimal upgrade to overcome "
"these conflicts, then a full upgrade as described in <xref linkend="
"\"upgrading-full\"/>."
msgstr ""
"In sommige gevallen kan het onmiddellijk uitvoeren van een volledige "
"opwaardering (zoals die hieronder beschreven wordt) leiden tot het "
"verwijderen van een groot aantal pakketten die u wenst te behouden. Daarom "
"bevelen we u een opwaardering in twee fases aan: eerst een minimale "
"opwaardering uitvoeren om de conflicten uit te schakelen die aanleiding "
"geven tot dat fenomeen en daarna een volledige opwaardering uitvoeren, zoals "
"beschreven in <xref linkend=\"upgrading-full\"/>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1019
msgid "To do this, first run:"
msgstr "Om dit te bereiken geeft u eerst het commando"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1022
#, no-wrap
msgid ""
"# apt upgrade --without-new-pkgs\n"
"    "
msgstr ""
"# apt upgrade --without-new-pkgs\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1025
msgid ""
"This has the effect of upgrading those packages which can be upgraded "
"without requiring any other packages to be removed or installed."
msgstr ""
"Dit heeft de opwaardering tot gevolg van die pakketten die opgewaardeerd "
"kunnen worden zonder dat andere pakketten verwijderd of geïnstalleerd moeten "
"worden."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1030
msgid ""
"The minimal system upgrade can also be useful when the system is tight on "
"space and a full upgrade cannot be run due to space constraints."
msgstr ""
"Een minimale opwaardering van het systeem kan ook nuttig zijn als het "
"systeem slechts over beperkte opslagruimte beschikt en een volledige "
"opwaardering omwille van opslagruimtebeperkingen niet toegepast kan worden."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1035
msgid ""
"If the <systemitem role=\"package\">apt-listchanges</systemitem> package is "
"installed, it will (in its default configuration) show important information "
"about upgraded packages in a pager after downloading the packages. Press "
"<keycap>q</keycap> after reading to exit the pager and continue the upgrade."
msgstr ""
"Indien het pakket <systemitem role=\"package\">apt-listchanges</systemitem> "
"geïnstalleerd is, zal het (bij zijn standaardconfiguratie) paginagewijs "
"belangrijke informatie over opgewaardeerde pakketten laten zien na het "
"downloaden van de pakketten. Druk na het lezen van de informatie op "
"<keycap>q</keycap> om de paginagewijze weergave te verlaten en voort te gaan "
"met de opwaardering."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1045
msgid "Upgrading the system"
msgstr "Het systeem opwaarderen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1047
msgid ""
"Once you have taken the previous steps, you are now ready to continue with "
"the main part of the upgrade.  Execute:"
msgstr ""
"Nadat u de voorgaande stappen gezet heeft, bent u nu klaar om voort te gaan "
"met het belangrijkste onderdeel van de opwaardering. Voer het volgende "
"commando uit:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1051
#, no-wrap
msgid ""
"# apt full-upgrade\n"
"    "
msgstr ""
"# apt full-upgrade\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1054
msgid ""
"This will perform a complete upgrade of the system, installing the newest "
"available versions of all packages, and resolving all possible dependency "
"changes between packages in different releases.  If necessary, it will "
"install some new packages (usually new library versions, or renamed "
"packages), and remove any conflicting obsoleted packages."
msgstr ""
"Dit zal een volledige opwaardering van het systeem uitvoeren, de meest "
"recente beschikbare versies van alle pakketten installeren, een oplossing "
"bieden voor alle mogelijke gewijzigde vereisten (meestal nieuwe "
"bibliotheekversies of hernoemde pakketten), welke pakketten hebben "
"vergeleken bij de vorige uitgave, en alle in de weg zittende verouderde "
"pakketten verwijderen."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1061
msgid ""
"When upgrading from a set of CDs/DVDs/BDs, you will probably be asked to "
"insert specific discs at several points during the upgrade.  You might have "
"to insert the same disc multiple times; this is due to inter-related "
"packages that have been spread out over the discs."
msgstr ""
"Indien u de opwaardering uitvoert met een set cd's/dvd's/BD's, zult u "
"wellicht op verschillende momenten tijdens de opwaardering gevraagd worden "
"een specifieke schijf in het station te plaatsen. Het is mogelijk dat u "
"verschillende malen dezelfde schijf in het station moet plaatsen. Dit heeft "
"te maken met pakketten die met elkaar verband houden en verspreid over de "
"verschillende schijven opgeslagen werden."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1067
msgid ""
"New versions of currently installed packages that cannot be upgraded without "
"changing the install status of another package will be left at their current "
"version (displayed as <quote>held back</quote>).  This can be resolved by "
"either using <command>aptitude</command> to choose these packages for "
"installation or by trying <literal>apt install <replaceable>package</"
"replaceable></literal>."
msgstr ""
"Momenteel geïnstalleerde pakketten die niet opgewaardeerd kunnen worden naar "
"een recentere versie zonder de installatiestatus van een ander geïnstalleerd "
"pakket te wijzigen, zullen op hun huidige versie behouden blijven (dit wordt "
"als <quote>gehandhaafd</quote> weergegeven). Dit kan opgelost worden door "
"ofwel <command>aptitude</command> te gebruiken om deze pakketten te "
"selecteren als te installeren pakketten of door het commando <literal>apt "
"install <replaceable>pakket</replaceable></literal> te gebruiken."

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:1079
msgid "Possible issues during upgrade"
msgstr "Mogelijke problemen tijdens de opwaardering"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1082
msgid ""
"The following sections describe known issues that might appear during an "
"upgrade to &releasename;."
msgstr ""
"In de volgende paragrafen worden bekende problemen beschreven die zich "
"eventueel kunnen manifesteren bij een opwaardering naar &releasename;."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1087
msgid ""
"Dist-upgrade fails with <quote>Could not perform immediate configuration</"
"quote>"
msgstr ""
"De opdracht dist-upgrade mislukt met de foutmelding <quote>Kon de "
"onmiddellijke configuratie niet uitvoeren</quote>"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1089
msgid ""
"In some cases the <command>apt full-upgrade</command> step can fail after "
"downloading packages with:"
msgstr ""
"In sommige gevallen kan de stap <command>apt full-upgrade</command> na het "
"downloaden van de pakketten mislukken met:"

#. type: Content of: <chapter><section><section><para><screen>
#: en/upgrading.dbk:1092
#, no-wrap
msgid ""
"E: Could not perform immediate configuration on '<replaceable>package</replaceable>'.  Please see man 5 apt.conf under APT::Immediate-Configure for details.\n"
"      "
msgstr ""
"E: Kon de onmiddellijke configuratie voor '<replaceable>pakket</replaceable>' niet uitvoeren. Raadpleeg man 5 apt.conf onder APT::Immediate-Configure voor bijzonderheden.\n"
"      "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1096
msgid ""
"If that happens, running <command>apt full-upgrade -o APT::Immediate-"
"Configure=0</command> instead should allow the upgrade to proceed."
msgstr ""
"Als dit zich voordoet, zou het mogelijk moeten zijn om de opwaardering voort "
"te zetten door <command>apt full-upgrade -o APT::Immediate-Configure=0</"
"command> als commando te gebruiken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1101
msgid ""
"Another possible workaround for this problem is to temporarily add both "
"&oldreleasename; and &releasename; sources to your APT source-list files and "
"run <command>apt update</command>."
msgstr ""
"Een andere mogelijke oplossing voor dit probleem is om tijdelijk zowel de "
"pakketbronnen voor &oldreleasename; als voor &releasename; op te nemen in uw "
"pakketbronbestanden voor APT en het commando <command>apt update</command> "
"te geven."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1108
msgid "Expected removals"
msgstr "Te verwachten verwijderingen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1110
msgid ""
"The upgrade process to &releasename; might ask for the removal of packages "
"on the system. The precise list of packages will vary depending on the set "
"of packages that you have installed.  These release notes give general "
"advice on these removals, but if in doubt, it is recommended that you "
"examine the package removals proposed by each method before proceeding.  For "
"more information about packages obsoleted in &releasename;, see <xref "
"linkend=\"obsolete\"/>."
msgstr ""
"Het proces van opwaarderen naar &releasename; kan om het verwijderen van "
"pakketten vragen. De exacte lijst van pakketten kan verschillen, afhankelijk "
"van welke pakketten op uw systeem geïnstalleerd zijn. In deze notities bij "
"de release worden algemene adviezen in verband met deze verwijderingen "
"gegeven, maar bij twijfel is het aangeraden om bij elke gebruikte "
"opwaarderingsmethode de voorgestelde pakketverwijderingen te onderzoeken "
"vooraleer verder te gaan. Meer informatie over in &releasename; verouderde "
"pakketten vindt u in <xref linkend=\"obsolete\"/>."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1122
msgid "Conflicts or Pre-Depends loops"
msgstr "Vicieuze cirkels van conflicten of voorvereisten"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1125
msgid ""
"Sometimes it's necessary to enable the <literal>APT::Force-LoopBreak</"
"literal> option in APT to be able to temporarily remove an essential package "
"due to a Conflicts/Pre-Depends loop.  <command>apt</command> will alert you "
"of this and abort the upgrade.  You can work around this by specifying the "
"option <literal>-o APT::Force-LoopBreak=1</literal> on the <command>apt</"
"command> command line."
msgstr ""
"Soms is het noodzakelijk om in APT de optie <literal>APT::Force-LoopBreak</"
"literal> te activeren om in staat te zijn om tijdelijk een essentieel pakket "
"te verwijderen omwille van een vicieuze cirkel van het type 'Conflicts/Pre-"
"Depends' ('Is tegenstrijdig met/Heeft als voorvereiste'). <command>apt</"
"command> zal u over een dergelijk probleem waarschuwen en de opwaardering "
"afbreken. U kunt dit probleem omzeilen door aan de commandoregel van "
"<command>apt</command> de optie <literal>-o APT::Force-LoopBreak=1</literal> "
"op te geven."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1133
msgid ""
"It is possible that a system's dependency structure can be so corrupt as to "
"require manual intervention.  Usually this means using <command>apt</"
"command> or"
msgstr ""
"Het is mogelijk dat de vereistenstructuur van een systeem dermate defect is "
"dat een manuele interventie noodzakelijk is. Gewoonlijk betekent dit dat "
"<command>apt</command> gebruikt zal moeten worden of"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1138
#, no-wrap
msgid ""
"# dpkg --remove <replaceable>package_name</replaceable>\n"
"    "
msgstr ""
"# dpkg --remove <replaceable>pakket_naam</replaceable>\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1141
msgid "to eliminate some of the offending packages, or"
msgstr ""
"om sommige van de voor problemen zorgende pakketten uit de weg ruimen, of"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1144
#, no-wrap
msgid ""
"# apt -f install\n"
"# dpkg --configure --pending\n"
"    "
msgstr ""
"# apt -f install\n"
"# dpkg --configure --pending\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1148
msgid ""
"In extreme cases you might have to force re-installation with a command like"
msgstr ""
"In extreme gevallen kan het gebeuren dat u herinstallatie moet forceren met "
"een commando zoals"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1151
#, no-wrap
msgid ""
"# dpkg --install <replaceable>/path/to/package_name.deb</replaceable>\n"
"    "
msgstr ""
"# dpkg --install <replaceable>/pad/naar/pakket_naam.deb</replaceable>\n"
"    "

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1157
msgid "File conflicts"
msgstr "Bestandsconflicten"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1160
msgid ""
"File conflicts should not occur if you upgrade from a <quote>pure</quote> "
"&oldreleasename; system, but can occur if you have unofficial backports "
"installed.  A file conflict will result in an error like:"
msgstr ""
"Bestandsconflicten zouden zich niet mogen voordoen als u een <quote>zuiver</"
"quote> &oldreleasename;-systeem opwaardeert, maar ze kunnen wel optreden als "
"u niet-officiële backports (een na een release verschenen recentere "
"pakketversie die voor die release geschikt gemaakt werd) geïnstalleerd "
"heeft. Bij een bestandsconflict krijgt u een foutmelding zoals:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1165
#, no-wrap
msgid ""
"Unpacking <replaceable>&lt;package-foo&gt;</replaceable> (from <replaceable>&lt;package-foo-file&gt;</replaceable>) ...\n"
"dpkg: error processing <replaceable>&lt;package-foo&gt;</replaceable> (--install):\n"
"trying to overwrite `<replaceable>&lt;some-file-name&gt;</replaceable>',\n"
"which is also in package <replaceable>&lt;package-bar&gt;</replaceable>\n"
"dpkg-deb: subprocess paste killed by signal (Broken pipe)\n"
"Errors were encountered while processing:\n"
"<replaceable>&lt;package-foo&gt;</replaceable>\n"
"    "
msgstr ""
"Uitpakken van <replaceable>&lt;pakket-foo&gt;</replaceable> (uit <replaceable>&lt;pakket-foo-bestand&gt;</replaceable>) ...\n"
"dpkg: fout bij het verwerken van <replaceable>&lt;pakket-foo&gt;</replaceable> (--install):\n"
" poging tot overschrijven van `<replaceable>&lt;een-bestands-naam&gt;</replaceable>',\n"
" ook aanwezig in pakket <replaceable>&lt;pakket-bar&gt;</replaceable>\n"
"dpkg-deb: subproces plakken gedood door signaal (Defecte pijp)\n"
"Er deden zich fouten voor bij het verwerken van:\n"
"<replaceable>&lt;pakket-foo&gt;</replaceable>\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1174
msgid ""
"You can try to solve a file conflict by forcibly removing the package "
"mentioned on the <emphasis>last</emphasis> line of the error message:"
msgstr ""
"U kunt een bestandsconflict proberen op te lossen door het pakket dat op de "
"<emphasis>laatste</emphasis> regel van de foutmelding vermeld wordt, "
"geforceerd te verwijderen:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1178
#, no-wrap
msgid ""
"# dpkg -r --force-depends <replaceable>package_name</replaceable>\n"
"    "
msgstr ""
"# dpkg -r --force-depends <replaceable>pakket_naam</replaceable>\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1181
msgid ""
"After fixing things up, you should be able to resume the upgrade by "
"repeating the previously described <command>apt</command> commands."
msgstr ""
"Nadat u dit gerepareerd heeft, zou u in staat moeten zijn om de opwaardering "
"te hervatten door de eerder beschreven <command>apt</command>-commando's "
"nogmaals uit te voeren."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1188
msgid "Configuration changes"
msgstr "Configuratiewijzigingen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1191
msgid ""
"During the upgrade, you will be asked questions regarding the configuration "
"or re-configuration of several packages.  When you are asked if any file in "
"the <filename>/etc/init.d</filename> directory, or the <filename>/etc/"
"manpath.config</filename> file should be replaced by the package "
"maintainer's version, it's usually necessary to answer <quote>yes</quote> to "
"ensure system consistency.  You can always revert to the old versions, since "
"they will be saved with a <literal>.dpkg-old</literal> extension."
msgstr ""
"Tijdens de opwaardering zult u vragen krijgen in verband met de configuratie "
"of de herconfiguratie van verschillende pakketten. Wanneer u gevraagd wordt "
"of een bestand in de map <filename>/etc/init.d</filename> of het bestand "
"<filename>/etc/manpath.config</filename> moet vervangen worden door de "
"versie van de pakketonderhouder, is het meestal nodig om te antwoorden met "
"<quote>yes</quote> om de consistentie van het systeem te verzekeren. U kunt "
"steeds terugkeren naar de oudere versie, vermits die bewaard zal worden met "
"de extensie <literal>.dpkg-old</literal>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1200
msgid ""
"If you're not sure what to do, write down the name of the package or file "
"and sort things out at a later time.  You can search in the typescript file "
"to review the information that was on the screen during the upgrade."
msgstr ""
"Indien u twijfelt wat u moet doen, kunt u de naam van het pakket of het "
"bestand noteren en de zaak uitzoeken op een later moment. U kunt in het "
"transcriptiebestand de informatie die tijdens de opwaardering op het scherm "
"verscheen, nog eens nalezen."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1207
msgid "Change of session to console"
msgstr "Verspringen van de sessie naar een console"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1209
msgid ""
"If you are running the upgrade using the system's local console you might "
"find that at some points during the upgrade the console is shifted over to a "
"different view and you lose visibility of the upgrade process.  For example, "
"this may happen in systems with a graphical interface when the display "
"manager is restarted."
msgstr ""
"Indien u de lokale console van het systeem gebruikt om de opwaardering uit "
"te voeren, kunt u ondervinden dat u op sommige momenten tijdens de "
"opwaardering plots een ander scherm te zien krijgt en het zicht op het "
"verloop van het opwaarderingsproces verloren bent. Dit kan bijvoorbeeld "
"gebeuren op systemen met een grafische interface wanneer de "
"beeldschermbeheerder opnieuw opgestart wordt."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1216
msgid ""
"To recover the console where the upgrade was running you will have to use "
"<keycombo action='simul'><keycap>Ctrl</keycap><keycap>Alt</"
"keycap><keycap>F1</keycap></keycombo> (if in the graphical startup screen) "
"or <keycombo action='simul'><keycap>Alt</keycap><keycap>F1</keycap></"
"keycombo> (if in the local text-mode console) to switch back to the virtual "
"terminal 1.  Replace F1 with the function key with the same number as the "
"virtual terminal the upgrade was running in. You can also use <keycombo "
"action='simul'><keycap>Alt</keycap><keycap>Left Arrow</keycap></keycombo> or "
"<keycombo action='simul'><keycap>Alt</keycap><keycap>Right Arrow</keycap></"
"keycombo> to switch between the different text-mode terminals."
msgstr ""
"Om de console te herstellen waarop de opwaardering liep, zult u de "
"toetsencombinatie <keycombo action='simul'><keycap>Ctrl</keycap><keycap>Alt</"
"keycap><keycap>F1</keycap></keycombo> (als u zich in het grafische "
"opstartscherm bevindt) of <keycombo action='simul'><keycap>Alt</"
"keycap><keycap>F1</keycap></keycombo> (als u zich in de lokale tekstmodus-"
"console bevindt) moeten gebruiken om terug te keren naar de virtuele "
"terminal 1. Vervang F1 door de functietoets die hetzelfde cijfer heeft als "
"het cijfer van de virtuele terminal waarin de opwaardering uitgevoerd werd. "
"U kunt ook <keycombo action='simul'><keycap>Alt</keycap><keycap>Pijl Links</"
"keycap></keycombo> of <keycombo action='simul'><keycap>Alt</"
"keycap><keycap>Pijl Rechts</keycap></keycombo> gebruiken om te wisselen "
"tussen de verschillende tekstmodus-terminals."

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:1233
msgid "Upgrading your kernel and related packages"
msgstr "Uw kernel en aanverwante pakketten opwaarderen"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1235
msgid ""
"This section explains how to upgrade your kernel and identifies potential "
"issues related to this upgrade.  You can either install one of the "
"<systemitem role=\"package\">linux-image-*</systemitem> packages provided by "
"Debian, or compile a customized kernel from source."
msgstr ""
"In deze paragraaf wordt uitgelegd hoe u uw kernel opwaardeert en worden "
"mogelijke problemen behandeld die met deze opwaardering verband houden. U "
"kunt ofwel een van de door Debian aangeboden <systemitem role=\"package"
"\">linux-image-*</systemitem>-pakketten installeren of een aangepaste kernel "
"compileren uit de broncode."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1241
msgid ""
"Note that a lot of information in this section is based on the assumption "
"that you will be using one of the modular Debian kernels, together with "
"<systemitem role=\"package\">initramfs-tools</systemitem> and <systemitem "
"role=\"package\">udev</systemitem>.  If you choose to use a custom kernel "
"that does not require an initrd or if you use a different initrd generator, "
"some of the information may not be relevant for you."
msgstr ""
"Merk op dat veel van de informatie uit deze paragraaf uitgaat van de aanname "
"dat u een van de modulaire kernels van Debian gebruikt samen met<systemitem "
"role=\"package\">initramfs-tools</systemitem> en <systemitem role=\"package"
"\">udev</systemitem>. Indien u ervoor kiest om een aangepaste kernel te "
"gebruiken die geen initrd nodig heeft of indien u een andere initrd-"
"generator gebruikt, zal bepaalde informatie voor u mogelijk niet relevant "
"zijn."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1249
msgid "Installing a kernel metapackage"
msgstr "Een kernel-metapakket installeren"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1251
msgid ""
"When you full-upgrade from &oldreleasename; to &releasename;, it is strongly "
"recommended that you install a linux-image-* metapackage, if you have not "
"done so before.  These metapackages will automatically pull in a newer "
"version of the kernel during upgrades.  You can verify whether you have one "
"installed by running:"
msgstr ""
"Wanneer u met het commando full-upgrade de stap zet van volledige "
"opwaardering van &oldreleasename; naar &releasename;, wordt het sterk "
"aanbevolen een linux-image-*-metapakket te installeren als u dit voordien "
"nog niet deed. Deze metapakketten installeren tijdens opwaarderingen "
"automatisch recentere versies van de kernel. U kunt nagaan of u een "
"metapakket geïnstalleerd heeft met het commando"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1258
#, no-wrap
msgid ""
"# dpkg -l \"linux-image*\" | grep ^ii | grep -i meta\n"
"    "
msgstr ""
"# dpkg -l \"linux-image*\" | grep ^ii | grep -i meta\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1261
msgid ""
"If you do not see any output, then you will either need to install a new "
"linux-image package by hand or install a linux-image metapackage.  To see a "
"list of available linux-image metapackages, run:"
msgstr ""
"Indien u geen uitvoer te zien krijgt, zult u ofwel zelf handmatig het pakket "
"met een recentere kernelversie moeten installeren ofwel een linux-image-"
"metapakket. Om de lijst met beschikbare linux-image-metapakketten te "
"krijgen, geeft u de opdracht"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1266
#, no-wrap
msgid ""
"# apt-cache search linux-image- | grep -i meta | grep -v transition\n"
"    "
msgstr ""
"# apt-cache search linux-image- | grep -i meta | grep -v transition\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1270
msgid ""
"If you are unsure about which package to select, run <literal>uname -r</"
"literal> and look for a package with a similar name.  For example, if you "
"see <quote><literal>4.9.0-8-amd64</literal></quote>, it is recommended that "
"you install <systemitem role=\"package\">linux-image-amd64</systemitem>.  "
"You may also use <command>apt</command> to see a long description of each "
"package in order to help choose the best one available.  For example:"
msgstr ""
"Indien u twijfelt over welk pakket u moet selecteren, moet u de opdracht "
"<literal>uname -r</literal> gebruiken en zoeken naar een pakket met een "
"soortgelijke naam. Indien u bijvoorbeeld <quote><literal>4.9.0-8-amd64</"
"literal></quote> te zien krijgt, is het aangeraden om <systemitem role="
"\"package\">linux-image-amd64</systemitem> te installeren. U kunt ook "
"gebruik maken van <command>apt-cache</command> om een uitgebreide "
"beschrijving van elk pakket te zien, hetgeen u kan helpen bij het kiezen van "
"het beste pakket uit de beschikbare pakketten. Bijvoorbeeld:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1279
#, no-wrap
msgid ""
"# apt show linux-image-amd64\n"
"    "
msgstr ""
"# apt show linux-image-amd64\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1282
msgid ""
"You should then use <literal>apt install</literal> to install it.  Once this "
"new kernel is installed you should reboot at the next available opportunity "
"to get the benefits provided by the new kernel version.  However, please "
"have a look at <xref linkend=\"before-first-reboot\" /> before performing "
"the first reboot after the upgrade."
msgstr ""
"U moet dan <literal>apt install</literal> gebruiken om het te installeren. "
"Nadat deze nieuwe kernel geïnstalleerd is, moet u bij de eerst mogelijke "
"gelegenheid het systeem herstarten om te kunnen genieten van de voordelen "
"die de nieuwe kernelversie biedt. Lees echter zeker eerst <xref linkend="
"\"before-first-reboot\" /> voor u de computer voor het eerst herstart na de "
"opwaardering."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1289
msgid ""
"For the more adventurous there is an easy way to compile your own custom "
"kernel on &debian;.  Install the kernel sources, provided in the <systemitem "
"role=\"package\">linux-source</systemitem> package.  You can make use of the "
"<literal>deb-pkg</literal> target available in the sources' makefile for "
"building a binary package.  More information can be found in the <ulink url="
"\"https://kernel-team.pages.debian.net/kernel-handbook/\";>Debian Linux "
"Kernel Handbook</ulink>, which can also be found as the <systemitem role="
"\"package\">debian-kernel-handbook</systemitem> package."
msgstr ""
"Voor de meer avontuurlijk aangelegde personen staat er in &debian; een "
"gemakkelijke methode ter beschikking om een eigen aangepaste kernel te "
"compileren. Installeer de broncode van de kernel die in het pakket "
"<systemitem role=\"package\">linux-source</systemitem> te vinden is. U kunt "
"het <literal>deb-pkg</literal>-target uit de makefile van de broncode "
"gebruiken om een binair pakket te bouwen. Meer informatie is te vinden in "
"het <ulink url=\"https://kernel-handbook.alioth.debian.org/\";>Debian Linux "
"Kernel Handbook</ulink>, dat ook beschikbaar is onder de vorm van het pakket "
"<systemitem role=\"package\">debian-kernel-handbook</systemitem>."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1299
msgid ""
"If possible, it is to your advantage to upgrade the kernel package "
"separately from the main <literal>full-upgrade</literal> to reduce the "
"chances of a temporarily non-bootable system.  Note that this should only be "
"done after the minimal upgrade process described in <xref linkend=\"minimal-"
"upgrade\"/>."
msgstr ""
"Als dit mogelijk is, heeft u er voordeel bij om het kernelpakket "
"afzonderlijk en los van de algemene <literal>full-upgrade</literal> op te "
"waarderen om de kansen te verkleinen dat het systeem zich tijdelijk in een "
"niet-opstartbare toestand bevindt. Merk op dat u dit pas mag doen na het "
"minimale opwaarderingsproces, beschreven in <xref linkend=\"minimal-upgrade"
"\"/>."

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:1310
msgid "Preparing for the next release"
msgstr "Voorbereid zijn op de volgende release"

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1312
msgid ""
"After the upgrade there are several things you can do to prepare for the "
"next release."
msgstr ""
"Na de opwaardering kunt u verschillende zaken doen om voorbereid te zijn op "
"de volgende release."

#. type: Content of: <chapter><section><itemizedlist><listitem><para>
#: en/upgrading.dbk:1318
msgid ""
"Remove newly redundant or obsolete packages as described in <xref linkend="
"\"sufficient-space\"/> and <xref linkend=\"obsolete\"/>.  You should review "
"which configuration files they use and consider purging the packages to "
"remove their configuration files.  See also <xref linkend=\"purge-removed-"
"packages\" />."
msgstr ""
"Verwijder pakketten als ze overbodig of verouderd geworden zijn, zoals "
"beschreven is in <xref linkend=\"sufficient-space\"/> en in <xref linkend="
"\"obsolete\"/>. U moet nakijken welke configuratiebestanden zij gebruiken en "
"erover denken om de pakketten te wissen zodat ook hun configuratiebestanden "
"verwijderd worden. Zie ook <xref linkend=\"purge-removed-packages\" />."

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1328
msgid "Purging removed packages"
msgstr "Verwijderde pakketten wissen"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1330
msgid ""
"It is generally advisable to purge removed packages.  This is especially "
"true if these have been removed in an earlier release upgrade (e.g. from the "
"upgrade to &oldreleasename;) or they were provided by third-party vendors.  "
"In particular, old init.d scripts have been known to cause issues."
msgstr ""
"Over het algemeen is het aanbevolen om verwijderde pakketten te wissen (met "
"het commando purge van APT). Dit is in het bijzonder het geval als ze bij "
"een eerdere release-upgrade verwijderd werden (bijvoorbeeld bij de "
"opwaardering naar &oldreleasename;) of als ze door een derde geleverd waren. "
"In het bijzonder van init.d-scripts is bekend dat deze voor problemen kunnen "
"zorgen."

#. type: Content of: <chapter><section><section><caution><para>
#: en/upgrading.dbk:1338
msgid ""
"Purging a package will generally also purge its log files, so you might want "
"to back them up first."
msgstr ""
"Door een pakket te wissen worden over het algemeen ook de logboekbestanden "
"ervan gewist. Misschien wilt u er eerst een reservekopie van maken."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1343
msgid ""
"The following command displays a list of all removed packages that may have "
"configuration files left on the system (if any):"
msgstr ""
"Het volgende commando toont een lijst van alle verwijderde pakketten waarvan "
"er mogelijk configuratiebestanden achtergebleven zijn op het systeem (indien "
"van toepassing):"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1347
#, no-wrap
msgid ""
"# dpkg -l | awk '/^rc/ { print $2 }'\n"
"    "
msgstr ""
"# dpkg -l | awk '/^rc/ { print $2 }'\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1350
msgid ""
"The packages can be removed by using <command>apt purge</command>.  Assuming "
"you want to purge all of them in one go, you can use the following command:"
msgstr ""
"De pakketten kunnen gewist worden met het commando <command>apt purge</"
"command>. In de veronderstelling dat u ze allemaal tegelijk wilt wissen, "
"kunt u het volgende commando gebruiken:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1355
#, no-wrap
msgid ""
"# apt purge $(dpkg -l | awk '/^rc/ { print $2 }')\n"
"    "
msgstr ""
"# apt purge $(dpkg -l | awk '/^rc/ { print $2 }')\n"
"    "

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1358
msgid ""
"If you use <systemitem role=\"package\">aptitude</systemitem>, you can also "
"use the following alternative to the commands above:"
msgstr ""
"Indien u <systemitem role=\"package\">aptitude</systemitem> gebruikt, kunt u "
"als alternatief voor de bovenstaande commando's ook het volgende gebruiken:"

#. type: Content of: <chapter><section><section><screen>
#: en/upgrading.dbk:1362
#, no-wrap
msgid ""
"# aptitude search '~c'\n"
"# aptitude purge '~c'\n"
"    "
msgstr ""
"# aptitude search '~c'\n"
"# aptitude purge '~c'\n"
"    "

#. type: Content of: <chapter><section><title>
#: en/upgrading.dbk:1370
msgid "Obsolete packages"
msgstr "Verouderde pakketten"

#. type: Content of: <chapter><section><para><footnote><para>
#: en/upgrading.dbk:1376
msgid ""
"Or for as long as there is not another release in that time frame.  "
"Typically only two stable releases are supported at any given time."
msgstr ""
"Of voor zover er binnen die tijdspanne geen andere release heeft "
"plaatsgevonden. Normaal worden niet meer dan twee stabiele releases tegelijk "
"ondersteund."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1372
msgid ""
"Introducing lots of new packages, &releasename; also retires and omits quite "
"a few old packages that were in &oldreleasename;.  It provides no upgrade "
"path for these obsolete packages.  While nothing prevents you from "
"continuing to use an obsolete package where desired, the Debian project will "
"usually discontinue security support for it a year after &releasename;'s "
"release<placeholder type=\"footnote\" id=\"0\"/>, and will not normally "
"provide other support in the meantime.  Replacing them with available "
"alternatives, if any, is recommended."
msgstr ""
"Worden er met &releasename; veel nieuwe pakketten geïntroduceerd, dan worden "
"er ook heel wat oude pakketten die in &oldreleasename; zaten met pensioen "
"gestuurd of weggelaten. Voor deze verouderde pakketten is geen opwaardering "
"meer voorzien. Hoewel niets u belet om desgewenst een verouderd pakket te "
"blijven gebruiken, zal het Debian-project gewoonlijk een jaar na de uitgave "
"van &releasename;<placeholder type=\"footnote\" id=\"0\"/> de "
"beveiligingsondersteuning ervan stopzetten en in die tussentijd gewoonlijk "
"ook geen andere ondersteuning meer bieden. Als er alternatieven voor de "
"verouderde pakketten beschikbaar zijn, is het aangeraden om ze door een "
"dergelijk alternatief te vervangen."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1383
msgid ""
"There are many reasons why packages might have been removed from the "
"distribution: they are no longer maintained upstream; there is no longer a "
"Debian Developer interested in maintaining the packages; the functionality "
"they provide has been superseded by different software (or a new version); "
"or they are no longer considered suitable for &releasename; due to bugs in "
"them.  In the latter case, packages might still be present in the "
"<quote>unstable</quote> distribution."
msgstr ""
"Er kunnen veel redenen zijn waarom een pakket verwijderd werd uit de "
"distributie: zij worden door de toeleveraar niet langer onderhouden; er is "
"niet langer een ontwikkelaar van Debian geïnteresseerd in het onderhoud van "
"het pakket; de geboden functionaliteit werd door andere software (of door "
"een nieuwere versie) overgenomen; of omdat ze bugs bevatten worden zij niet "
"langer als geschikt beschouwd voor &releasename;. In dit laatste geval kan "
"het pakket wel nog aanwezig zijn in de distributie <quote>unstable</quote>."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1391
msgid ""
"Some package management front-ends provide easy ways of finding installed "
"packages that are no longer available from any known repository. The "
"<command>aptitude</command> textual user interface lists them in the "
"category <quote>Obsolete and Locally Created Packages</quote>, and they can "
"be listed and purged from the commandline with:"
msgstr ""
"Sommige frontends voor pakketbeheer bieden een gemakkelijke manier om "
"geïnstalleerde pakketten te vinden die op geen enkele gekende pakketbron "
"meer beschikbaar zijn. De tekstuele gebruikersinterface van "
"<command>aptitude</command> vermeldt ze onder de categorie <quote>Verouderde "
"en lokaal gecreëerde pakketten</quote> en ze kunnen aan de commandoregel "
"weergegeven en gewist worden met:"

#. type: Content of: <chapter><section><screen>
#: en/upgrading.dbk:1398
#, no-wrap
msgid ""
"# aptitude search '~o'\n"
"# aptitude purge '~o'\n"
"  "
msgstr ""
"# aptitude search '~o'\n"
"# aptitude purge '~o'\n"
"  "

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1402
msgid ""
"The <ulink url=\"&url-bts;\">Debian Bug Tracking System</ulink> often "
"provides additional information on why the package was removed.  You should "
"review both the archived bug reports for the package itself and the archived "
"bug reports for the <ulink url=\"&url-bts;cgi-bin/pkgreport.cgi?pkg=ftp."
"debian.org&amp;archive=yes\">ftp.debian.org pseudo-package</ulink>."
msgstr ""
"Het <ulink url=\"&url-bts;\">Bugopvolgingssysteem van Debian</ulink> "
"verschaft dikwijls bijkomende informatie over de redenen voor het "
"verwijderen van een pakket. U moet zowel de bugrapporten voor het pakket "
"zelf als de bugrapporten voor het <ulink url=\"&url-bts;cgi-bin/pkgreport."
"cgi?pkg=ftp.debian.org&amp;archive=yes\">pseudo-pakket ftp.debian.org</"
"ulink> erop nakijken."

#. type: Content of: <chapter><section><para>
#: en/upgrading.dbk:1411
msgid ""
"For a list of obsolete packages for &Releasename;, please refer to <xref "
"linkend=\"noteworthy-obsolete-packages\"/>."
msgstr ""
"Raadpleeg voor een lijst van voor &Releasename; verouderde pakketten <xref "
"linkend=\"noteworthy-obsolete-packages\"/>"

#. type: Content of: <chapter><section><section><title>
#: en/upgrading.dbk:1416
msgid "Transitional dummy packages"
msgstr "Dummy overgangspakketten"

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1418
msgid ""
"Some packages from &oldreleasename; may have been replaced in &releasename; "
"by transitional dummy packages, which are empty placeholders designed to "
"simplify upgrades. If for instance an application that was formerly a single "
"package has been split into several, a transitional package may be provided "
"with the same name as the old package and with appropriate dependencies to "
"cause the new ones to be installed. After this has happened the redundant "
"dummy package can be safely removed."
msgstr ""
"Sommige pakketten uit &oldreleasename; kunnen in &releasename; vervangen "
"zijn door dummy overgangspakketten, welke tijdelijke plaatsbekleders zijn, "
"bedoeld om opwaarderingen te vereenvoudigen. Indien bijvoorbeeld een "
"toepassing die vroeger uit een enkel pakket bestond, opgesplitst werd in "
"verschillende pakketten, kan voorzien worden in een overgangspakket met "
"dezelfde naam als het oude pakket en met passende vereisten die tot de "
"installatie van de nieuwe pakketten leiden. Nadat dit gebeurd is, kan het "
"overbodige dummypakket veilig verwijderd worden."

#. type: Content of: <chapter><section><section><para>
#: en/upgrading.dbk:1427
msgid ""
"The package descriptions for transitional dummy packages usually indicate "
"their purpose. However, they are not uniform; in particular, some "
"<quote>dummy</quote> packages are designed to be kept installed, in order to "
"pull in a full software suite, or track the current latest version of some "
"program. You might also find <command>deborphan</command> with the "
"<literal>--guess-<replaceable>*</replaceable></literal> options (e.g.  "
"<literal>--guess-dummy</literal>) useful to detect transitional dummy "
"packages on your system."
msgstr ""
"De pakketbeschrijving van dummy overgangspakketten vermeldt gewoonlijk welk "
"doel deze hebben. Deze zijn echter niet uniform; in het bijzonder zijn "
"sommige <quote>dummy</quote>-pakketten bedoeld om geïnstalleerd te blijven, "
"met als doel om een volledige softwaresuite binnen te trekken of om doorheen "
"de tijd zicht te blijven houden op de meest recente beschikbare versie van "
"een programma. Wellicht vindt u ook <command>deborphan</command> met een van "
"de opties van het type <literal>--guess-<replaceable>*</replaceable></"
"literal> (bijv. <literal>--guess-dummy</literal>), nuttig om dummy "
"overgangspakketten op uw systeem te detecteren."

Reply to: