[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[LCFC] po-debconf://freeswan (Re: [RFR] po-debconf://freeswan (50 strings))



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAs35y5UTeB5t8Mo0RAuh7AJ4+JwrqiV1zjdYGMC2y9IBgrs+5HACgiJOv
AlPRGmdcVbtqFlHqB8Wzztw=
=N+i3
-----END PGP SIGNATURE-----
#
#    Translators, if you are not familiar with the PO format, gettext
#    documentation is worth reading, especially sections dedicated to
#    this format, e.g. by running:
#         info -n '(gettext)PO Files'
#         info -n '(gettext)Header Entry'
#
#    Some information specific to po-debconf are available at
#            /usr/share/doc/po-debconf/README-trans
#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
#
#    Developers do not need to manually edit POT or PO files.
#
msgid ""
msgstr ""
"Project-Id-Version: freeswan 2.04-9\n"
"POT-Creation-Date: 2004-03-22 10:30+0100\n"
"PO-Revision-Date: 2004-05-25 19:11+0100\n"
"Last-Translator: Luk Claes <luk.claes@ugent.be>\n"
"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: select
#. Choices
#: ../freeswan.templates.master:3
msgid "earliest, \"after NFS\", \"after PCMCIA\""
msgstr "\"zo vroeg mogelijk\", \"na NFS\", \"na PCMCIA\""

#. Type: select
#. Description
#: ../freeswan.templates.master:5
msgid "At which level do you wish to start FreeS/WAN ?"
msgstr "Op welk niveau wilt u FreeS/WAN starten?"

#. Type: select
#. Description
#: ../freeswan.templates.master:5
msgid "With the current Debian startup levels (nearly everything starting in level 20), it is impossible for FreeS/WAN to always start at the correct time. There are three possibilities when FreeS/WAN can start: before or after the NFS services and after the PCMCIA services. The correct answer depends on your specific setup."
msgstr "Met de huidige Debian-startniveaus (bijna alles start op niveau 20), is het onmogelijk voor FreeS/WAN om altijd op de correcte tijd te starten. Er zijn drie mogelijkheden waar FreeS/WAN kan starten: vóór of na de NFS-diensten en na de PCMCIA-diensten. Het correcte antwoord hangt af van uw specifieke configuratie."

#. Type: select
#. Description
#: ../freeswan.templates.master:5
msgid "If you do not have your /usr tree mounted via NFS (either you only mount other, less vital trees via NFS or don't use NFS mounted trees at all) and don't use a PCMCIA network card, then it is the best to start FreeS/WAN at the earliest possible time, thus allowing the NFS mounts  to be secured by IPSec. In this case (or if you don't understand or care  about this issue), answer \"earliest\" to this question (the default)."
msgstr "Als u uw /usr-boom niet via NFS heeft aangekoppeld (u koppelt enkel andere, minder vitale bomen via NFS of u gebruikt NFS helemaal niet om bomen aan te koppelen) en u gebruikt geen PCMCIA-netwerkkaart, dan is het best om FreeS/WAN zo vroeg mogelijk te starten, dus toe te staan van de NFS-aankoppelingen te beveiligen door IPSec. In dit geval (of als u deze zaak niet verstaat of het u niet uitmaakt), antwoord dan \"zo vroeg mogelijk\" op deze vraag (de standaard)."

#. Type: select
#. Description
#: ../freeswan.templates.master:5
msgid "If you have your /usr tree mounted via NFS and don't use a PCMCIA network card, then you will need to start FreeS/WAN after NFS so that all necessary files are available. In this case, answer \"after NFS\" to this question. Please note that the NFS mount of /usr can  not be secured by IPSec in this case."
msgstr "Als u uw /usr-boom via NFS heeft aangekoppeld en u gebruikt geen PCMCIA-netwerkkaart, dan zult u FreeS/WAN moeten starten na NFS zodat alle nodige bestanden aanwezig zijn. In dit geval, antwoord \"na NFS\" op deze vraag. Merk op dat in dit geval de NFS-aankoppeling van /usr niet beveiligd kan worden door IPSec."

#. Type: select
#. Description
#: ../freeswan.templates.master:5
msgid "If you use a PCMCIA network card for your IPSec connections, then you only have to choice to start it after the PCMCIA services. Answer \"after PCMCIA\" in this case. This is also the correct answer if you want to fetch keys from a locally running DNS server with DNSSec support."
msgstr "Als u een PCMCIA-netwerkkaart gebruikt voor uw IPSec-verbindingen, dan hebt u enkel de keuze om te starten na de PCMCIA-diensten. Antwoord in dit geval \"na PCMCIA\". Dit is ook het correcte antwoord als u sleutels wilt afhalen van een lokaal draaiende DNS-server met DNSSec-ondersteuning."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:33
msgid "Do you wish to restart FreeS/WAN?"
msgstr "Wilt u FreeS/WAN herstarten?"

#. Type: boolean
#. Description
#: ../freeswan.templates.master:33
msgid "Restarting FreeS/WAN is a good idea, since if there is a security fix, it will not be fixed until the daemon restarts. Most people expect the daemon to restart, so this is generally a good idea. However this might take down existing connections and then bring them back up."
msgstr "FreeS/WAN herstarten is een goed idee omdat als er een veiligheidsherstelling is, het pas echt hersteld zal zijn vanaf dat de achtergronddienst is herstart. De meeste mensen verwachten dat de achtergronddienst herstart, dus dit is meestal een goed idee. Hoewel, dit kan bestaande verbindingen verbreken en ze dan opnieuw herstellen."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:42
msgid "Do you want to create a RSA public/private keypair for this host ?"
msgstr "Wilt u een publiek/privaat RSA-sleutelpaar aanmaken voor deze host?"

#. Type: boolean
#. Description
#: ../freeswan.templates.master:42
msgid "This installer can automatically create a RSA public/private keypair for this host. This keypair can be used to authenticate IPSec connections to other hosts and is the preferred way for building up secure IPSec connections. The other possibility would be to use shared secrets (passwords that are the same on both sides of the tunnel) for authenticating an connection, but for a larger number of connections RSA authentication is easier to administrate and more secure."
msgstr "Deze installatie kan automatisch een publiek/privaat RSA-sleutelpaar aanmaken voor deze host. Dit sleutelpaar kan gebruikt worden om IPSec-verbinden naar andere hosts te authenticeren en is de aanbevolen manier om veilige IPSec-verbindingen op te zetten. De andere mogelijkheid zou zij om gedeelde geheimen (wachtwoorden die aan beide kanten van de tunnel hetzelfde zijn) te gebruiken voor het authenticeren van een verbinding, maar voor een groter aantal verbindingen is RSA-authenticatie gemakkelijker te beheren en veiliger."

#. Type: select
#. Choices
#: ../freeswan.templates.master:53
msgid "x509, plain"
msgstr "x509, gewoon"

#. Type: select
#. Description
#: ../freeswan.templates.master:55
msgid "Which type of RSA keypair do you want to create ?"
msgstr "Welk type RSA-sleutelpaar wilt u aanmaken?"

#. Type: select
#. Description
#: ../freeswan.templates.master:55
msgid "It is possible to create a plain RSA public/private keypair for the use with FreeS/WAN or to create a X509 certificate file which contains the RSA public key and additionally store the corresponding private key."
msgstr "Het is mogelijk om een gewoon publiek/privaat RSA-sleutelpaar aan te maken om te gebruiken met FreeS/WAN of om een X509-certificaatbestand aan te maken die de publieke RSA-sleutel bevat en de corresponderende private sleutel te bewaren."

#. Type: select
#. Description
#: ../freeswan.templates.master:55
msgid "If you only want to build up IPSec connections to hosts also running FreeS/WAN, it might be a bit easier using plain RSA keypairs. But if you want to connect to other IPSec implementations, you will need a X509 certificate. It is also possible to create a X509 certificate here and extract the RSA public key in plain format if the other side runs FreeS/WAN without X509 certificate support."
msgstr "Als u enkel IPSec-verbindingen wilt opzetten naar hosts die ook FreeS/WAN draaien, dan is het misschien een beetje gemakkelijker om gewone RSA-sleutelparen te gebruiken. Maar als u verbindingen wilt leggen met andere IPSec-implementaties, dan zult u een X509-certificaat nodig hebben. Het is ook mogelijk om hier een X509-certificaat aan te maken en de publieke RSA-sleutel te extraheren in een gewoon formaat als de andere kant FreeS/WAN draait zonder X509-certificaatondersteuning."

#. Type: select
#. Description
#: ../freeswan.templates.master:55
msgid "Therefore a X509 certificate is recommended since it is more flexible and this installer should be able to hide the complex creation of the X509 certificate and its use in FreeS/WAN anyway."
msgstr "Daarom wordt een X509-certificaat aanbevolen omdat het flexibeler is en deze installatie moet de complexe creatie van een X509-certificaat kunnen verbergen en het toch in FreeS/WAN kunnen gebruiken."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:74
msgid "Do you have an existing X509 certificate file that you want to use for FreeS/WAN ?"
msgstr "Hebt u een bestaand X509-certificaatbestand dat u voor FreeS/WAN wilt gebruiken?"

#. Type: boolean
#. Description
#: ../freeswan.templates.master:74
msgid "This installer can automatically extract the needed information from an existing X509 certificate with a matching RSA private key. Both parts can be in one file, if it is in PEM format. Do you have such an existing certificate and key file and want to use it for authenticating IPSec connections ?"
msgstr "Deze installatie kan de benodigde informatie automatisch extraheren van een bestaand X509-certificaat met een bijhorende private RSA-sleutel. Beide delen kunnen in één bestand zijn, als het in PEM-formaat is. Hebt u zo'n bestaand certificaat en een sleutelbestand; en wilt u het voor de authenticatie van IPSec-verbindingen gebruiken?"

#. Type: string
#. Description
#: ../freeswan.templates.master:83
msgid "Please enter the location of your X509 certificate in PEM format."
msgstr "Geef de locatie van uw X509-certificaat in PEM-formaat."

#. Type: string
#. Description
#: ../freeswan.templates.master:83
msgid "Please enter the location of the file containing your X509 certificate in PEM format."
msgstr "Geef de locatie van het bestand dat uw X509-certificaat in PEM-formaat bevat."

#. Type: string
#. Description
#: ../freeswan.templates.master:89
msgid "Please enter the location of your X509 private key in PEM format."
msgstr "Geef de locatie van uw private X509-sleutel in PEM-formaat."

#. Type: string
#. Description
#: ../freeswan.templates.master:89
msgid "Please enter the location of the file containing the private RSA key matching your X509 certificate in PEM format. This can be the same file that contains the X509 certificate."
msgstr "Geef de locatie van het bestand dat uw private RSA-sleutel bevat die behoort bij uw X509-certificaat in PEM-formaat. Dit kan hetzelfde bestand zijn als dat wat uw X509-certificaat bevat."

#. Type: string
#. Description
#: ../freeswan.templates.master:97
msgid "Which length should the created RSA key have ?"
msgstr "Welke lengte moet de aangemaakte RSA-sleutel hebben?"

#. Type: string
#. Description
#: ../freeswan.templates.master:97
msgid "Please enter the length of the created RSA key. it should not be less than 1024 bits because this should be considered unsecure and you will probably not need anything more than 2048 bits because it only slows the authentication process down and is not needed at the moment."
msgstr "Geef de lengte van de aangemaakte RSA-sleutel. Het mag niet minder dan 1024 bits zijn omdat dit als onveilig wordt beschouwd en u zult waarschijnlijk niet meer dan 2048 bits nodig hebben omdat het enkel het authenticatieproces vertraagt en op dit moment niet nodig is."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:106
msgid "Do you want to create a self-signed X509 certificate ?"
msgstr "Wilt u een door uzelf getekend X509-certificaat?"

#. Type: boolean
#. Description
#: ../freeswan.templates.master:106
msgid "This installer can only create self-signed X509 certificates automatically, because otherwise a certificate authority is needed to sign the certificate request. If you want to create a self-signed certificate, you can use it immediately to connect to other IPSec hosts that support X509 certificate for authentication of IPSec connections. However, if you want to use the new PKI features of FreeS/WAN >= 1.91, you will need to have all X509 certificates signed by a single certificate authority to create a trust path."
msgstr "Deze installatie kan automatisch een door uzelf getekend X509-certificaat aanmaken omdat anders een certificaatautoriteit nodig is om de certificaataanvraag te tekenen. Als u een door uzelf getekend certificaat wilt aanmaken, dan kunt u het onmiddellijk gebruiken om een verbinding te leggen met andere IPSec-hosts die X509-certificaten ondersteunen voor IPSec-verbindingen. Hoewel, als u de nieuwe PKI-mogelijkheden wilt gebruiken of als FreeS/WAN >= 1.91, dan zult u alle X509-certificaten moeten laten tekenen door één enkele certificaatautoriteit om een vertrouwenspad aan te maken."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:106
msgid "If you do not want to create a self-signed certificate, then this installer will only create the RSA private key and the certificate request and you will have to sign the certificate request with your certificate authority."
msgstr "Als u geen door uzelf getekend certificaat wilt aanmaken, dan zal deze installatie enkel de private RSA-sleutel en de certificaataanvraag aanmaken en u zult de certificaataanvraag moeten laten tekenen door uw certificaatautoriteit."

#. Type: string
#. Description
#: ../freeswan.templates.master:124
msgid "Please enter the country code for the X509 certificate request."
msgstr "Geef de landcode van de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:124
msgid "Please enter the 2 letter country code for your country. This code will be placed in the certificate request."
msgstr "Geef de 2-letterige landcode voor uw land. Deze code zal in de certificaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:124
msgid "You really need to enter a valid country code here, because openssl will refuse to generate certificates without one. An empty field is allowed for any other field of the X.509 certificate, but not for this one."
msgstr "U moet hier wel een geldige landcode opgeven omdat openssl anders zal weigeren om een certificaat aan te maken. Er is voor elke veld van het X509-certificaat een leeg veld toegestaan, maar niet voor dit veld."

#. Type: string
#. Description
#: ../freeswan.templates.master:124
msgid "Example: AT"
msgstr "Voorbeeld: BE"

#. Type: string
#. Description
#: ../freeswan.templates.master:137
msgid "Please enter the state or province name for the X509 certificate request."
msgstr "Geef de staat of provincie voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:137
msgid "Please enter the full name of the state or province you live in. This name will be placed in the certificate request."
msgstr "Geef de volledige naam van de staat of provincie waarin u woont. Deze naam zal in de certificaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:137
msgid "Example: Upper Austria"
msgstr "Voorbeeld: Limburg"

#. Type: string
#. Description
#: ../freeswan.templates.master:146
msgid "Please enter the locality name for the X509 certificate request."
msgstr "Geef de plaatsnaam voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:146
msgid "Please enter the locality (e.g. city) where you live. This name will be placed in the certificate request."
msgstr "Geef de plaatsnaam (v.b. stad) waar u woont. Deze naam zal in de certificaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:146
msgid "Example: Vienna"
msgstr "Voorbeeld: Genk"

#. Type: string
#. Description
#: ../freeswan.templates.master:155
msgid "Please enter the organization name for the X509 certificate request."
msgstr "Geef de naam van de organisatie voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:155
msgid "Please enter the organization (e.g. company) that the X509 certificate should be created for. This name will be placed in the certificate request."
msgstr "Geef de organisatie (v.b. bedrijf) waarvoor het X509-certificaat wordt aangemaakt. Deze naam zal in de certicicaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:155
msgid "Example: Debian"
msgstr "Voorbeeld: Debian"

#. Type: string
#. Description
#: ../freeswan.templates.master:165
msgid "Please enter the organizational unit for the X509 certificate request."
msgstr "Geef de organisatie-eenheid voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:165
msgid "Please enter the organizational unit (e.g. section) that the X509 certificate should be created for. This name will be placed in the certificate request."
msgstr "Geef de organisatie-eenheid (v.b. dienst) waarvoor het X509-certificaat wordt aangemaakt. Deze naam zal in de certificaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:165
msgid "Example: security group"
msgstr "Voorbeeld: dienst veiligheid"

#. Type: string
#. Description
#: ../freeswan.templates.master:175
msgid "Please enter the common name for the X509 certificate request."
msgstr "Geef de naam voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:175
msgid "Please enter the common name (e.g. the host name of this machine) for which the X509 certificate should be created for. This name will be placed in the certificate request."
msgstr "Geef de naam (v.b. computernaam van deze machine) waarvoor het X509-certificaat wordt aangemaakt. Deze naam zal in de certificaataanvraag worden geplaatst."

#. Type: string
#. Description
#: ../freeswan.templates.master:175
msgid "Example: gateway.debian.org"
msgstr "Voorbeeld: gateway.debian.org"

#. Type: string
#. Description
#: ../freeswan.templates.master:185
msgid "Please enter the email address for the X509 certificate request."
msgstr "Geef het e-mailadres voor de X509-certificaataanvraag."

#. Type: string
#. Description
#: ../freeswan.templates.master:185
msgid "Please enter the email address of the person or organization who is responsible for the X509 certificate, This address will be placed in the certificate request."
msgstr "Geef het e-mailadres van de persoon of organisatie die verantwoordelijk is voor het X509-certificaat. Dit adres zal in de certificaataanvraag worden geplaatst."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:193
msgid "Do you wish to enable opportunistic encryption in FreeS/WAN?"
msgstr "Wilt u opportunistische encryptie aanschakelen in FreeS/WAN?"

#. Type: boolean
#. Description
#: ../freeswan.templates.master:193
msgid "FreeS/WAN comes with support for opportunistic encryption (OE), which stores IPSec authentication information (i.e. RSA public keys) in (preferrably secure) DNS records. Until this is widely deployed, activating it will cause a significant slow-down for every new, outgoing connection. Since version 2.0, FreeS/WAN upstream comes with OE enabled by default and is thus likely to break you existing connection to the Internet (i.e. your default route) as soon as pluto (the FreeS/WAN keying daemon) is started."
msgstr "FreeS/WAN heeft ondersteuning voor opportunistische encryptie (OE) die IPSec-authenticatie-informatie (v.b. publieke RSA-sleutels) bewaart in (liefst veilige) DNS-records. Totdat dit veelvuldig wordt toegepast zal dit activeren, een significate vertraging veroorzaken voor elke nieuwe uitgaande verbinding. Omdat versie 2.0 van FreeS/WAN standaard OE heeft aangeschakeld, wordt dus waarschijnlijk uw bestaande verbinding met het Internet (v.b. uw standaard route) verbroken vanaf dat pluto (de FreeS/WAN-sleutelringachtergronddienst) wordt gestart."

#. Type: boolean
#. Description
#: ../freeswan.templates.master:193
msgid "Please choose whether you want to enable support for OE. If unsure, do not enable it."
msgstr "Kiest of u OE-ondersteuning wilt aanschakelen. Indien onzeker, schakel het dan niet aan."


Reply to: