grub2 1.98+20100804-10: Please update debconf PO translation for the package grub2
WARNING: 4 days deadline!
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been changed, and now some messages
are marked "fuzzy" in your translation or are missing.
I would be grateful if you could take the time and update it.
Please submit the updated file as a wishlist bug against grub2.
The deadline for receiving the updated translation is
Sun, 12 Dec 2010 18:44:11 -0400.
Thanks in advance,
Regards
David
# Danish translation grub2.
# Copyright (C) 2010 grub2 & nedenstående oversættere.
# This file is distributed under the same license as the grub2 package.
# Joe Hansen <joedalton2@yahoo.dk>, 2010.
# Korrekturlæst Kenneth Nielsen.
#
# Chain loading -> Chain loading is a method used by computer programs
# to replace the currently executing program with a new program,
# using a common data area (a so-called core common area) to pass
# information from the current program to the new program. It occurs
# in several areas of computing. Et dansk navn?
# man kunne måske med nogen rimelighed kalde det for kædeindlæsning, men
# egentlig er det her jo et af de ord som jeg ikke mener at behøver at
# oversætte. Dem der har brug for at vide hvad det er, kender kun det
# engelsk ord og det danske vil måske endda forvirre mere end det vil
# gøre gavn. I hvert fald, hvis du vil oversætte vil jeg anbefale at
# sætte chainloade i parentes der hvor du kan. Beholdt uoversat.
#
msgid ""
msgstr ""
"Project-Id-Version: grub2\n"
"Report-Msgid-Bugs-To: grub2@packages.debian.org\n"
"POT-Creation-Date: 2010-12-08 18:02-0400\n"
"PO-Revision-Date: 2010-08-01 17:30+01:00\n"
"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
"Language-Team: Danish <debian-l10n-danish@lists.debian.org> \n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "Chainload fra menu.lst?"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr ""
"Opgraderingsskripterne til GRUB har fundet en GRUB Legacy-opsætning i /boot/"
"grub."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
#, fuzzy
#| msgid ""
#| "In order to replace the Legacy version of GRUB in your system, it is "
#| "recommended that /boot/grub/menu.lst is adjusted to chainload GRUB 2 from "
#| "your existing GRUB Legacy setup. This step may be automaticaly performed "
#| "now."
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image "
"from your existing GRUB Legacy setup. This step can be automatically "
"performed now."
msgstr ""
"For at erstatte GRUB-versionen Legacy på dit system, anbefales det at /boot/"
"grub/menu.lst justeres til at chainloade GRUB 2 fra din eksisterende GRUB "
"Legacy-opsætning. Dette trin kan udføres automatisk nu."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
#, fuzzy
#| msgid ""
#| "It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
#| "verify that your new GRUB 2 setup is functional for you, before you "
#| "install it directly to your MBR (Master Boot Record)."
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that the new GRUB 2 setup works before it is written to the MBR "
"(Master Boot Record)."
msgstr ""
"Det anbefales, at du accepter at chainloade GRUB 2 fra menu.lst, og "
"verificerer at din nye GRUB 2-opsætning virker for dig, før du installerer "
"den direkte til din MBR (Master Boot Record)."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"Whatever your decision, you can replace the old MBR image with GRUB 2 later "
"by issuing the following command as root:"
msgstr ""
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
#, fuzzy
#| msgid "GRUB failed to install to the following devices:"
msgid "GRUB install devices:"
msgstr "Kunne ikke installere GRUB til de følgende enheder:"
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"The grub-pc package is being upgraded. This menu allows you to select which "
"devices you'd like grub-install to be automatically run for, if any."
msgstr ""
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"Running grub-install automatically is recommended in most situations, to "
"prevent the installed GRUB core image from getting out of sync with GRUB "
"modules or grub.cfg."
msgstr ""
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"If you're unsure which drive is designated as boot drive by your BIOS, it is "
"often a good idea to install GRUB to all of them."
msgstr ""
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"Note: it is possible to install GRUB to partition boot records as well, and "
"some appropriate partitions are offered here. However, this forces GRUB to "
"use the blocklist mechanism, which makes it less reliable, and therefore is "
"not recommended."
msgstr ""
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:4001
msgid ""
"The GRUB boot loader was previously installed to a disk that is no longer "
"present, or whose unique identifier has changed for some reason. It is "
"important to make sure that the installed GRUB core image stays in sync with "
"GRUB modules and grub.cfg. Please check again to make sure that GRUB is "
"written to the appropriate boot devices."
msgstr ""
#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB, ${MODEL})"
msgstr "${DEVICE} (${SIZE} MB, ${MODEL})"
#. Type: text
#. Description
#. The "-" is used to indicate indentation. Leading spaces may not work.
#: ../grub-pc.templates.in:6001
#, fuzzy
#| msgid "${DEVICE} (${SIZE} MB, ${MODEL})"
msgid "- ${DEVICE} (${SIZE} MB, ${PATH})"
msgstr "${DEVICE} (${SIZE} MB, ${MODEL})"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "Writing GRUB to boot device failed - continue?"
msgstr ""
#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr "Kunne ikke installere GRUB til de følgende enheder:"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway? If you do, your computer may not start up "
"properly."
msgstr ""
"Ønsker du at fortsætte alligevel? Hvis du fortsætter, kan din computer måske "
"ikke starte korrekt op."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
#, fuzzy
#| msgid "GRUB installation failed. Try again?"
msgid "Writing GRUB to boot device failed - try again?"
msgstr "GRUB-installation mislykkedes. Forsøg igen?"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device. Otherwise, the upgrade "
"from GRUB Legacy will be canceled."
msgstr ""
"Du kan måske installere GRUB til en anden enhed, selvom du skal tjekke at "
"dit system kan/vil opstarte fra denne enhed. Ellers vil opgraderingen fra "
"GRUB Legacy blive afbrudt."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr "Fortsæt uden at installere GRUB?"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
#, fuzzy
#| msgid ""
#| "You chose not to install GRUB to any devices. If you continue, the boot "
#| "loader may not be properly configured, and when your computer next starts "
#| "up it will use whatever was previously in the boot sector. If there is an "
#| "earlier version of GRUB 2 in the boot sector, it may be unable to load "
#| "modules or handle the current configuration file."
msgid ""
"You chose not to install GRUB to any devices. If you continue, the boot "
"loader may not be properly configured, and when this computer next starts up "
"it will use whatever was previously in the boot sector. If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""
"Du har valgt ikke at installere GRUB på nogen enhed. Hvis du fortsætter, vil "
"opstarteren (boot loader) måske ikke være korrekt konfigureret, og når din "
"computer starter op næste gang, vil den bruge det tidligere indhold i din "
"opstartssektor (boot sector). Hvis der er en tidligere version af GRUB 2 i "
"opstartsektoren, vil den måske ikke være i stand til at indlæse moduler "
"eller håndtere den aktuelle konfigurationsfil."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
#, fuzzy
#| msgid ""
#| "If you are already running a different boot loader and want to carry on "
#| "doing so, or if this is a special environment where you do not need a "
#| "boot loader, then you should continue anyway. Otherwise, you should "
#| "install GRUB somewhere."
msgid ""
"If you are already using a different boot loader and want to carry on doing "
"so, or if this is a special environment where you do not need a boot loader, "
"then you should continue anyway. Otherwise, you should install GRUB "
"somewhere."
msgstr ""
"Hvis du allerede kører en anden opstarter (boot loader) og ønsker at "
"fortsætte med dette, eller hvis dette er et specielt miljø, hvor du ikke har "
"brug for en opstarter, så skal du fortsætte alligevel. Ellers skal du "
"installere GRUB et eller andet sted."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Remove GRUB 2 from /boot/grub?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Do you want to have all GRUB 2 files removed from /boot/grub?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid ""
"This will make the system unbootable unless another boot loader is installed."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr "Afslut konvertering til GRUB 2 nu?"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""
"Dette system har stadig filer fra GRUB Legacy-opstarteren installeret, men "
"systemet har nu også GRUB 2 opstartsposter installeret på disse diske:"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""
"Det virker sandsynligt at GRUB Legacy ikke længere er i brug, og at du i "
"steden fir skal opgradere GRUB 2-billederne på disse diske og afslutte "
"konverteringen til GRUB 2 ved af fjerne ældre GRUB Legacy-filer. Hvis du "
"ikke opgraderer disse GRUB 2-billeder, så er de måske ikke kompatible med de "
"nye pakker og får dit system til at holde op med at starte korrekt op."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""
"Du bør generelt afslutte konverteringen til GRUB 2 medmindre disse "
"opstartsposter blev oprettet af en GRUB 2-installation på et andet "
"operativsystem."
#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Kommandolinje til Linux:"
#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"Den følgende kommandolinje i Linux blev udtrukket fra /etc/default/grub "
"eller parameteren `kopt' i GRUB Legacys menu.lst. Verificer venligst at den "
"er korrekt, og ændre den om nødvendigt."
#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Standardkommandolinje i Linux:"
#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr ""
"Den følgende streng vil blive brugt som Linuxparametre for "
"standardmenupunktet men ikke for gendannelsestilstanden."
#. Type: string
#. Description
#: ../templates.in:3001
msgid "kFreeBSD command line:"
msgstr "Kommandolinje for kFreeBSD:"
#. Type: string
#. Description
#: ../templates.in:3001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"Den følgende kommandolinje i kFreeBSD blev udtrukket fra /etc/default/grub "
"eller fra parameteren `kopt' i GRUB Legacys menu.lst. Verificer venligst at "
"den er korrekt, og ændre den om nødvendigt."
#. Type: string
#. Description
#: ../templates.in:4001
msgid "kFreeBSD default command line:"
msgstr "Standardkommandolinje i kFreeBSD:"
#. Type: string
#. Description
#: ../templates.in:4001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr ""
"Den følgende streng vil blive brugt som kFreeBSD-parametre for "
"standardmenupunktet men ikke for gendannelsestilstanden."
#. Type: note
#. Description
#: ../templates.in:5001
msgid "/boot/grub/device.map has been regenerated"
msgstr "/boot/grub/device.map er blevet gendannet"
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"The file /boot/grub/device.map has been rewritten to use stable device "
"names. In most cases, this should significantly reduce the need to change it "
"in future, and boot menu entries generated by GRUB should not be affected."
msgstr ""
"Filen /boot/grub/device.map er blevet genskrevet til at bruge stabile "
"enhedsnavne. I de fleste tilfælde vil dette markant reducere behovet for at "
"ændre filen fremover, og opstartsmenupunkter oprettet af GRUB vil ikke blive "
"påvirket."
#. Type: note
#. Description
#: ../templates.in:5001
#, fuzzy
#| msgid ""
#| "However, since you have more than one disk in your system, it is possible "
#| "that you were depending on the old device map. Please check whether you "
#| "have any custom boot menu entries that rely on GRUB's (hdN) drive "
#| "numbering, and update them if necessary."
msgid ""
"However, since more than one disk is present in the system, it is possible "
"that the system is depending on the old device map. Please check whether "
"there are any custom boot menu entries that rely on GRUB's (hdN) drive "
"numbering, and update them if necessary."
msgstr ""
"Da du har mere end en disk i dit sytem, er det dog muligt, at du har en "
"afhængighed af det gamle enhedskort. Tjek venligst om du har nogle "
"tilpassede opstartsmenupunkter som afhænger af GRUB's (hdn) drevnummerering, "
"og opdater dem om nødvendigt."
#. Type: note
#. Description
#: ../templates.in:5001
#, fuzzy
#| msgid ""
#| "If you do not understand this message, or if you do not have any custom "
#| "boot menu entries, you can ignore this message."
msgid ""
"If you do not understand this message, or if there are no custom boot menu "
"entries, you can ignore this message."
msgstr ""
"Hvis du ikke forstår denne besked, eller du ikke har nogen tilpasset "
"opstartsmenupunkter, kan du ignorere denne besked."
#~ msgid ""
#~ "In either case, whenever you want GRUB 2 to be loaded directly from MBR, "
#~ "you can do so by issuing (as root) the following command:"
#~ msgstr ""
#~ "Uanset hvad, når du ønsker at GRUB 2 skal indlæses direkte fra MBR, kan "
#~ "du gøre det ved at udstede (som root) den følgende kommando:"
#~ msgid "GRUB installation failed. Continue?"
#~ msgstr "GRUB-installation mislykkedes. Fortsæt?"
Reply to: