[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Auto detecting FireWire Drives and Knoppix 5.1



I've got a problem with 5.01 (CD) and my firewire external drive, and
wondered if this could be fixed for the Knoppix 5.1 (whenever that my
be, although Klaus did mention it in passing on 2006-09-12.) and/or what
I could do now.

With Knoppix 4.02, my firewire drive is correctly loaded, and desktop
icons appear.  
With Knoppix 5.01, recognition takes place and then there's an error -
from dmesg: ohci1394: fw-host0: SelfID received, but NodeID invalid
(probably new bus reset occurred): 0000FFC0

Two text files are attached - one for 4.02 and the other for 5.01.  Both
contain the results of dmesg, lspci and fdisk.

Regards
Christopher

Christopher MC CARTHY
Integration Tester
CertEx
GL TRADE Headquarters
42 Rue Notre Dame des Victoires
F-75002 Paris
+33 1 53 40 00 00 (switchboard)
+33 1 53 40 01 16 (direct line)
www.gltrade.com
=========
contents
=========
- dmesg
- lspci
- lspci -v
- sudo fdisk -l /dev/sda
=========


Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug
 9 23:20:52 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000eb400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
 BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
 BIOS-e820: 00000000fffeb400 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32752
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 28656 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6f60
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x07ffbbb4
ACPI: FADT (v001 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x07fffb8c
ACPI: DSDT (v001    PTL    BX-TJ 0x06040000 MSFT 0x0100000c) @ 0x00000000
ACPI: BIOS age (1999) fails cutoff (2002), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 08000000 (gap: 08000000:f7feb400)
Built 1 zonelists
Kernel command line: ### isk_size=100000 init=/etc/init lang=us apm=power-off vga=791 ini
trd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01201000)
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Detected 330.955 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 123736k/131008k available (1882k kernel code, 6580k reserved, 999k data, 296k ini
t, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 649.21 BogoMIPS (lpj=324608)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000
00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 0
0000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 0000000
0
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel Mobile Pentium II stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000001
  groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 845k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6fd0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa67, dseg 0x400
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:07.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:09.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0c.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:01:00.0
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0x1000-0x103f has been reserved
pnp: 00:00: ioport range 0x1040-0x104f has been reserved
pnp: 00:00: ioport range 0x1050-0x1050 has been reserved
pnp: 00:01: ioport range 0x3810-0x381f has been reserved
pnp: 00:01: ioport range 0x3830-0x383f has been reserved
audit: initializing netlink socket (disabled)
audit(1159678053.780:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfd000000, mapped to 0xc8880000, using 3072k, total 8128k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:4dc2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard on isa0060/serio0
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
PCI: IRQ 0 for device 0000:00:07.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: setting IRQ 9 as level-triggered
PCI: Assigned IRQ 9 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fcc0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 30344 blocks, 65536 bytes/block, largest block is 65552 by
tes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20050921-1517
Freeing unused kernel memory: 296k freed
Real Time Clock Driver v1.12
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:0c.0 [1250:6000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0xcba92543, devctl 0x66
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000020
PCI: Found IRQ 9 for device 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:0c.1 [1250:6000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.1, mfunc 0xcba92543, devctl 0x66
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000020
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:00.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[8804000-88047ff]  Max Packet=[204
8]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009007010100000f]
spurious 8259A interrupt: IRQ7.
ieee1394: Node added: ID:BUS[0-01:1023]  GUID[0030e07fe0ffffff]
ieee1394: The root node is not cycle master capable; selecting a new root node and resett
ing...
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x1f0-0x1f7 0x2f8-0x2ff 0x378-0x37f
0x3f0-0x3ff
cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x1f0-0x1f7 0x2f8-0x2ff 0x378-0x37f
0x3f0-0x3ff
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
  Vendor: SAMSUNG   Model: SP1614N           Rev: TM10
  Type:   Direct-Access                      ANSI SCSI revision: 06
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
 sda: sda1 < sda5 > sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: RealTek RTL8139 at 0xc8d12000, 00:50:22:00:52:87, IRQ 9
eth1:  Identified 8139 chip type 'RTL-8139C'
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport0: Printer, Hewlett-Packard HP LaserJet 6L
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
PCI: Enabling device 0000:00:09.0 (0000 -> 0001)
PCI: IRQ 0 for device 0000:00:09.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: setting IRQ 5 as level-triggered
PCI: Assigned IRQ 5 for device 0000:00:09.0
maestro: Configuring ESS Maestro 2E found at IO 0xF800 IRQ 5
maestro:  subvendor id: 0x06651558
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x414b4d00 caps: 0x0 pwr: 0xf
maestro: 1 channels configured.
maestro: version 0.15 time 22:38:56 Aug  9 2005
Linux agpgart interface v0.101 (c) Dave Jones
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
Adding 265064k swap on /dev/sda3.  Priority:-1 extents:1
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
NET: Registered protocol family 17
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000

knoppix@0[knoppix]$ lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
0000:00:0c.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
0000:00:0c.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev                                   dc)
0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (                                  rev 10)

knoppix@0[knoppix]$ lspci -v
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 128
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fd000000-fedfffff

0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at fcf0 [size=16]

0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at fcc0 [size=32]

0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9

0000:00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at f800 [size=256]
        Capabilities: <available only to root>

0000:00:0c.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 08000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 08400000-087ff000 (prefetchable)
        Memory window 1: 08800000-08bff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        16-bit legacy interface ports at 0001

0000:00:0c.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 08001000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 08c00000-08fff000 (prefetchable)
        Memory window 1: 09000000-093ff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        16-bit legacy interface ports at 0001

0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) (prog-if 00 [VGA])
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at e800 [size=256]
        Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI])
        Subsystem: Texas Instruments: Unknown device 8010
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at 08804000 (32-bit, non-prefetchable) [size=2K]
        Memory at 08800000 (32-bit, non-prefetchable) [size=16K]
        Memory at 08804800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <available only to root>

0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at 4800 [size=256]
        Memory at 09000000 (32-bit, non-prefetchable) [size=512]
        Capabilities: <available only to root>

knoppix@0[knoppix]$ fdisk -l
knoppix@0[knoppix]$ fdisk -l /dev/sda
Cannot open /dev/sda
knoppix@0[knoppix]$ sudo fdisk -l /dev/sda

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            6490       19457   104165460    f  W95 Ext'd (LBA)
/dev/sda2   *           1        3115    25021206   83  Linux
/dev/sda3            3116        3148      265072+  82  Linux swap / Solaris
/dev/sda4            3149        6489    26836582+  83  Linux
/dev/sda5            6490       19457   104165428+  83  Linux

Partition table entries are not in disk order
knoppix@0[knoppix]$
=========
contents
=========
- dmesg
- lspci
- lspci -v
- sudo fdisk -l /dev/sda
- lsmod
=========



Linux version 2.6.17 (root@Knoppix) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000eb400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
 BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
 BIOS-e820: 00000000fffeb400 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32752
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 28656 pages, LIFO batch:7
DMI 2.1 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6f60
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x07ffbbb4
ACPI: FADT (v001 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x07fffb8c
ACPI: DSDT (v001    PTL    BX-TJ 0x06040000 MSFT 0x0100000c) @ 0x00000000
ACPI: BIOS age (1999) fails cutoff (2002), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 08000000:f7feb400)
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01109000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 330.920 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124888k/131008k available (2225k kernel code, 5592k reserved, 807k data, 324k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 663.13 BogoMIPS (lpj=1326277)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: Intel Mobile Pentium II stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 729k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6fd0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa67, dseg 0x400
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PIIX4 devres E PIO at 0378-037f
Boot video device is 0000:01:00.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:01:00.0
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0x1000-0x103f has been reserved
pnp: 00:00: ioport range 0x1040-0x104f has been reserved
pnp: 00:00: ioport range 0x1050-0x1050 has been reserved
pnp: 00:01: ioport range 0x3810-0x381f has been reserved
pnp: 00:01: ioport range 0x3830-0x383f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: fd000000-fedfffff
  PREFETCH window: 18000000-180fffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0c.1
  IO window: 00001c00-00001cff
  IO window: 00002000-000020ff
  PREFETCH window: 14000000-15ffffff
  MEM window: 16000000-17ffffff
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Found IRQ 9 for device 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:0c.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 49152 bytes)
TCP bind hash table entries: 2048 (order: 2, 24576 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1159680290.720:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfd000000, mapped to 0xc8880000, using 3072k, total 8128k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:4dc2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
input: AT Translated Set 2 keyboard as /class/input/input0
VFS: Mounted root (ext2 filesystem).
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
PCI: setting IRQ 9 as level-triggered
PCI: Assigned IRQ 9 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fcc0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.04
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 31120 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20060221-0341
Freeing unused kernel memory: 324k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:0c.0 [1250:6000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0xcba92543, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000020
PCI: Found IRQ 9 for device 0000:00:0c.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:0c.1 [1250:6000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.1, mfunc 0xcba92543, devctl 0x66
Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
Socket status: 30000020
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:00.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[12004000-120047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
pccard: CardBus card inserted into slot 1
ohci1394: fw-host0: SelfID received, but NodeID invalid (probably new bus reset occurred): 0000FFC0
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x1f0-0x1f7 0x2f8-0x2ff 0x378-0x37f 0x3f0-0x3ff
cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x1f0-0x1f7 0x2f8-0x2ff 0x378-0x37f 0x3f0-0x3ff
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
NET: Registered protocol family 23
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: RealTek RTL8139 at 0xc8c7a000, 00:50:22:00:52:87, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport0: Printer, Hewlett-Packard HP LaserJet 6L
PCI: Enabling device 0000:00:09.0 (0000 -> 0001)
PCI: setting IRQ 5 as level-triggered
PCI: Assigned IRQ 5 for device 0000:00:09.0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
es1968: clocking to 48000
Linux video capture interface: v1.00
ts: Compaq touchscreen protocol output
fuse init (API version 7.6)
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present

knoppix@1[knoppix]$ lspci
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
0000:00:0c.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
0000:00:0c.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc)
0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

knoppix@1[knoppix]$ lspci -v
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 128
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fd000000-fedfffff
        Prefetchable memory behind bridge: 18000000-180fffff

0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at fcf0 [size=16]

0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at fcc0 [size=32]

0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9

0000:00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at f800 [size=256]
        Capabilities: <available only to root>

0000:00:0c.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 18100000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10000000-11fff000 (prefetchable)
        Memory window 1: 12000000-13fff000
        I/O window 0: 00001400-000014ff
        I/O window 1: 00001800-000018ff
        16-bit legacy interface ports at 0001

0000:00:0c.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 18101000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 14000000-15fff000 (prefetchable)
        Memory window 1: 16000000-17fff000
        I/O window 0: 00001c00-00001cff
        I/O window 1: 00002000-000020ff
        16-bit legacy interface ports at 0001

0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) (prog-if 00 [VGA])
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at e800 [size=256]
        Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 18000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI])
        Subsystem: Texas Instruments: Unknown device 8010
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at 12004000 (32-bit, non-prefetchable) [size=2K]
        Memory at 12000000 (32-bit, non-prefetchable) [size=16K]
        Memory at 12004800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <available only to root>

0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at 1c00 [size=256]
        Memory at 16000000 (32-bit, non-prefetchable) [size=512]
        Capabilities: <available only to root>

knoppix@1[knoppix]$ sudo lspci -v
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0

0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 128
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fd000000-fedfffff
        Prefetchable memory behind bridge: 18000000-180fffff

0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at fcf0 [size=16]

0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at fcc0 [size=32]

0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9

0000:00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at f800 [size=256]
        Capabilities: [c0] Power Management version 2

0000:00:0c.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 18100000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10000000-11fff000 (prefetchable)
        Memory window 1: 12000000-13fff000
        I/O window 0: 00001400-000014ff
        I/O window 1: 00001800-000018ff
        16-bit legacy interface ports at 0001

0000:00:0c.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
        Subsystem: Hitachi Microcomputer System Ltd: Unknown device 6000
        Flags: bus master, medium devsel, latency 168, IRQ 9
        Memory at 18101000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 14000000-15fff000 (prefetchable)
        Memory window 1: 16000000-17fff000
        I/O window 0: 00001c00-00001cff
        I/O window 1: 00002000-000020ff
        16-bit legacy interface ports at 0001

0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) (prog-if 00 [VGA])
        Subsystem: CLEVO/KAPOK Computer: Unknown device 0665
        Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at e800 [size=256]
        Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 18000000 [disabled] [size=128K]
        Capabilities: [50] AGP version 1.0
        Capabilities: [5c] Power Management version 1

0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller (prog-if 10 [OHCI])
        Subsystem: Texas Instruments: Unknown device 8010
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at 12004000 (32-bit, non-prefetchable) [size=2K]
        Memory at 12000000 (32-bit, non-prefetchable) [size=16K]
        Memory at 12004800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [44] Power Management version 1

0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at 1c00 [size=256]
        Memory at 16000000 (32-bit, non-prefetchable) [size=512]
        Capabilities: [50] Power Management version 2

knoppix@1[knoppix]$ sudo fdisk -l /dev/sda

knoppix@1[knoppix]$ lsmod
Module                  Size  Used by
ipv6                  238336  10
sworks_agp             11040  0
nvidia_agp              9756  0
ati_agp                10636  0
amd_k7_agp             10380  0
ali_agp                 9344  0
af_packet              23816  0
dm_mod                 48404  0
fuse                   34952  0
tsdev                   9920  0
radio_maestro           9600  0
compat_ioctl32          5120  1 radio_maestro
videodev               11136  1 radio_maestro
8250_pnp               12288  0
8250                   24320  1 8250_pnp
snd_es1968             27008  1
irtty_sir               8960  0
serial_core            20480  1 8250
parport_pc             38512  0
parport                33992  1 parport_pc
gameport               14728  1 snd_es1968
sir_dev                16844  1 irtty_sir
i2c_piix4              11664  0
8139too                25728  0
snd_ac97_codec         88352  1 snd_es1968
snd_ac97_bus            6016  1 snd_ac97_codec
snd_pcm_oss            38176  0
snd_mixer_oss          17536  1 snd_pcm_oss
snd_pcm                73220  3 snd_es1968,snd_ac97_codec,snd_pcm_oss
snd_timer              22148  1 snd_pcm
snd_page_alloc         11272  2 snd_es1968,snd_pcm
snd_mpu401_uart         9984  1 snd_es1968
snd_rawmidi            22560  1 snd_mpu401_uart
snd_seq_device         10252  1 snd_rawmidi
snd                    44768  11 snd_es1968,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
irda                  116152  1 sir_dev
crc_ccitt               5888  1 irda
mii                     8448  1 8139too
soundcore              11104  1 snd
i2c_core               20480  1 i2c_piix4
shpchp                 37032  0
pci_hotplug            28612  1 shpchp
intel_agp              22684  1
agpgart                29156  6 sworks_agp,nvidia_agp,ati_agp,amd_k7_agp,ali_agp,intel_agp
evdev                  11648  1
usbhid                 50144  0
pcmcia                 33324  4
firmware_class         11648  1 pcmcia
yenta_socket           25612  6
rsrc_nonstatic         14080  1 yenta_socket
pcmcia_core            35992  3 pcmcia,yenta_socket,rsrc_nonstatic
apm                    21612  1
unionfs                61728  1
cloop                  20608  1
sbp2                   22788  0
ohci1394               33200  0
ieee1394              285784  2 sbp2,ohci1394
usb_storage            76480  0
ohci_hcd               21636  0
uhci_hcd               23308  0
ehci_hcd               32008  0
usbcore               109084  6 usbhid,usb_storage,ohci_hcd,uhci_hcd,ehci_hcd
knoppix@1[knoppix]$

Reply to: