usb card not working
Hi, I've just installed a new USB2.0 card in my system
(it has a USB1.1 interface on the mb)
and my external USB2.0 hard disk does not work any longer.
I've googled for the error (see /var/log/syslog snippet at the end of this message)
but found no solution...
Anyone has some clue?
Here follows the content of /proc/bus/usb/devices, just in case...
Ah, knoppix 3.7 dist-upgraded ;)
Thanx
Bye
---------/proc/bus/usb/devices---------------
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-2-686 ehci_hcd
S: Product=VIA Technologies, Inc. USB 2.0
S: SerialNumber=0000:02:0a.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-2-686 uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S: SerialNumber=0000:02:0a.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-2-686 uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
S: SerialNumber=0000:02:0a.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-2-686 uhci_hcd
S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 0.02
S: Manufacturer=Genesyslogic
S: Product=USB Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05a9 ProdID=0511 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 992 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 993 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl=1ms
I: If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms
I: If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl=1ms
I: If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl=1ms
I: If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
---------------/var/log/syslog-----------------
Mar 1 19:09:06 dvd kernel: usb 4-1: new high speed USB device using address 4
Mar 1 19:09:11 dvd kernel: usb 4-1: control timeout on ep0out
Mar 1 19:09:16 dvd kernel: usb 4-1: control timeout on ep0out
Mar 1 19:09:17 dvd kernel: usb 4-1: device not accepting address 4, error -110
Mar 1 19:09:17 dvd kernel: usb 4-1: new high speed USB device using address 5
Mar 1 19:09:22 dvd kernel: usb 4-1: control timeout on ep0out
Mar 1 19:09:27 dvd kernel: usb 4-1: control timeout on ep0out
Mar 1 19:09:27 dvd kernel: usb 4-1: device not accepting address 5, error -110
Mar 1 19:10:01 dvd /USR/SBIN/CRON[4643]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
Mar 1 19:14:21 dvd anacron[4042]: Job `cron.weekly' started
Mar 1 19:14:21 dvd anacron[4939]: Updated timestamp for job `cron.weekly' to 2005-03-01
Mar 1 19:14:29 dvd syslogd 1.4.1#16: restart.
Mar 1 19:14:29 dvd anacron[4042]: Job `cron.weekly' terminated
Mar 1 19:17:01 dvd /USR/SBIN/CRON[5224]: (root) CMD ( run-parts --report /etc/cron.hourly)
Mar 1 19:17:26 dvd kernel: usb 2-1: new full speed USB device using address 2
Mar 1 19:17:31 dvd kernel: usb 2-1: control timeout on ep0out
Mar 1 19:17:36 dvd kernel: usb 2-1: control timeout on ep0out
Mar 1 19:17:36 dvd kernel: usb 2-1: device not accepting address 2, error -110
Mar 1 19:17:36 dvd kernel: usb 2-1: new full speed USB device using address 3
Mar 1 19:17:41 dvd kernel: usb 2-1: control timeout on ep0out
Mar 1 19:17:47 dvd kernel: usb 2-1: control timeout on ep0out
Mar 1 19:17:47 dvd kernel: usb 2-1: device not accepting address 3, error -110
Mar 1 19:19:22 dvd anacron[4042]: Job `cron.monthly' started
Mar 1 19:19:23 dvd anacron[5377]: Updated timestamp for job `cron.monthly' to 2005-03-01
Mar 1 19:19:46 dvd anacron[4042]: Job `cron.monthly' terminated
Mar 1 19:19:46 dvd anacron[4042]: Normal exit (2 jobs run)
Mar 1 19:20:01 dvd /USR/SBIN/CRON[5568]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
--
Donna da' alla luce un bambino: l'ENEL ringrazia.
----------------------------------------------------------------------------------------------
Andrea Trentini - D.I.Co - Universita' di Milano - http://www.sl-lab.it - http://www.atrent.it
----------------------------------------------------------------------------------------------
No proprietary format attachments: http://www.gnu.org/philosophy/no-word-attachments.html
----------------------------------------------------------------------------------------------
E'nato MotoCivismo! http://www.motocivismo.it | "NO!" to sw patents! http://www.eff.org/patent
----------------------------------------------------------------------------------------------
Reply to: