Re: [debian-knoppix] Gnome 2.2 on KNOPPIX, please
Am Sonntag, 23. Februar 2003 19:29 schrieb Kai Lahmann:
> Mantas K. schrieb:
> > All hardware supported in 3.3.6 is also supported in 4.2.1
> > except for Mach8 and some old Mach32 chips.
> >
> >If you don't understand: this means, that xserver-mach64 is unneeded !!!!
>
> read the words after "except".
apt-cache search xserver | grep mach
xserver-mach32 - X server for ATI Mach32-based graphics cards
xserver-mach64 - X server for ATI Mach64-based graphics cards
xserver-mach8 - X server for ATI Mach8-based graphics cards
Ok, "except for Mach8 and some old Mach32 chips." means IMHO that
xserver-mach32 and xserver-mach8 are necessary, but xserver-mach64, and thats
what he said is not ...
Please inform yourself :-)
>
> > All hardware supported in 3.3.6 is also supported in 4.2.1
> > except for the 911, 924, 801, 805, 928, 864, and 868, and versions of the
> > 964 and 968 that do not use the RAMDAC chips listed above. The
> > SuperSavage chipset is supported only in 4.2.1.
> >
> >If you don't understand: this means, that xserver-s3v is unneeded !!!!
>
> same here.
no ... :-)
apt-cache search xserver | grep s3
xserver-s3 - X server for S3 chipset-based graphics cards
xserver-s3v - X server for S3 ViRGE and ViRGE/VX-based graphics cards
All Virge-Chipsets are supported that means xserver-s3v can go, but xserver-s3
needs to be kept.
>
> > All cards supported by 3.3.6 are also supported by 4.2.1
> > except for the old ET3000.
> >
> >If you don't understand: this means, that xserver-w32 is unneeded !!!!
>
> and here
no, xserver-w32 - X server for Tseng ET4000/W32 and ET6000-based graphics
cards
so ET3000 is not supported in xserver-w32 either ... but it is from svga afair
cu
Fabian
_______________________________________________
debian-knoppix mailing list
debian-knoppix@linuxtag.org
http://mailman.linuxtag.org/mailman/listinfo/debian-knoppix
Reply to: