[debian-knoppix] Firewire help?
I have a Vaio GRX600. I have attached to it via the 1394 port a IDE hard
drive inside a drive enclosure. Knoppix recognizes the 4 internal NTFS
partitions on the Sony, but does not seem to recognize the external drive
which is FAT32.
What can I do to help Knoppix recognize the external drive?
Thx,
tomber
************************
LCPI.txt & dmesg.txt below
LCPI
¬ \@¬ \@compatible controller: ATI Technologies Inc Radeon Mobility M7 LW
(prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency
66, IRQ 9
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at [disabled] [size=128K]
Capabilities:
02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168, IRQ 3
Memory at e8202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001
02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168
Memory at e8203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00004c00-00004cff
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 64
Memory at e8201000 (32-bit, non-prefetchable) [size=2K]
Capabilities:
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet
Controller (rev 42)
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 66, IRQ 9
Memory at e8200000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 4000 [size=64]
Capabilities:
DMESG
Linux version 2.4.19-xfs (knoppix@Knoppix) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 SMP Son Okt 6 20:14:17 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 130944
zone(0): 4096 pages.
zone(1): 126848 pages.
zone(2): 0 pages.
Sony Vaio laptop detected.
Kernel command line: lang=us ramdisk_size=100000 init=/etc/init noapic
apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi
hdh=scsi vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=knoppix
BOOT_IMAGE=vmlinuz
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1789.689 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3565.15 BogoMIPS
Memory: 514888k/523776k available (1257k kernel code, 8432k reserved, 487k
data, 124k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: bfebf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: bfebf9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU: Common caps: bfebf9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: bfebf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: bfebf9ff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU: Common caps: bfebf9ff 00000000 00000000 00000000
CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
per-CPU timeslice cutoff: 1462.79 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd9ca, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xf0000000, mapped to 0xe080d000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:54db
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller on PCI bus 00 dev f9
PCI: No IRQ known for interrupt pin A of device 00:1f.1. Please try using
pci=biosirq.
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23EA-60, ATA DISK drive
hdc: SONY CD-RW/DVD-ROM CRX820E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 117210240 sectors (60012 MB) w/2048KiB Cache, CHS=7296/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX820E Rev: 1.5k
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 474k freed
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.66
cloop: /cdrom/KNOPPIX/KNOPPIX: 28499 blocks, 65536 bytes/block, largest
block is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 124k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 3 for device 02:05.0
PCI: No IRQ known for interrupt pin B of device 02:05.1. Please try using
pci=biosirq.
Yenta IRQ list 0cb0, PCI irq3
Socket status: 30000006
Yenta IRQ list 0cb0, PCI irq0
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0816-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3f8-0x3ff
0x4d0-0x4d7
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 20:27:15 Oct 6 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:1d.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin C of device 00:1d.2. Please try using
pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x529/0x422) is not claimed by any active
driver.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ohci1394: $Rev: 530 $ Ben Collins <bcollins@debian.org>
PCI: No IRQ known for interrupt pin C of device 02:05.2. Please try using
pci=biosirq.
ohci1394: Failed to allocate shared interrupt 0
ohci1394: pci_module_init failed
i810_rng hardware driver 0.9.8 loaded
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
PCI: Found IRQ 9 for device 02:08.0
eth0: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller,
08:00:46:7A:48:D3, IRQ 9.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Intel 810 + AC97 Audio, version 0.21, 20:26:45 Oct 6 2002
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x18c0 and 0x1c00, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x594d:0x4803 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
ac97_codec: AC97 Modem codec, id: 0x4358:0x5421 (Unknown)
i810_audio: timed out waiting for codec 1 analog ready.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xec000000
eth0: 0 multicast blocks dropped.
[drm] AGP 0.99 on Intel i845 @ 0xec000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
cloop: error -3 uncompressing block 4114 65536/65536/22749/0
88941667-88964416
end_request: I/O error, dev f0:00 (cloop), sector 526704
cloop: error -3 uncompressing block 4114 65536/65536/22749/0
88941667-88964416
end_request: I/O error, dev f0:00 (cloop), sector 526704
cloop: error -3 uncompressing block 4114 65536/65536/22749/0
88941667-88964416
end_request: I/O error, dev f0:00 (cloop), sector 526704
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526208
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526212
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526216
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526220
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526224
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526228
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526232
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526236
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526240
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526244
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526240
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526244
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526240
cloop: error -3 uncompressing block 4111 65536/65536/23214/0
88868895-88892109
end_request: I/O error, dev f0:00 (cloop), sector 526244
_______________________________________________
debian-knoppix mailing list
debian-knoppix@linuxtag.org
http://mailman.linuxtag.org/mailman/listinfo/debian-knoppix
Reply to: