Bug#1122154: UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.9/drivers/gpu/drm/radeon/
Package: src:linux
Version: 6.17.9-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Booting up in forky
* What exactly did you do (or not do) that was effective (or
ineffective)?
Start the machine with forky
* What was the outcome of this action?
The following traces showed up in the log. No associated malfunction detected :
[ 2.569196] ------------[ cut here ]------------
[ 2.569197] UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.9/drivers/gpu/drm/radeon/radeon_atombios.c:2720
:34
[ 2.569204] index 18 is out of range for type 'UCHAR [*]'
[ 2.569208] CPU: 0 UID: 0 PID: 249 Comm: kworker/0:3 Not tainted 6.17.9+deb14-amd64 #1 PREEMPT(lazy) Debian 6.17.9-1
[ 2.569211] Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A99X EVO R2.0, BIOS 2501 04/03/2014
[ 2.569212] Workqueue: events work_for_cpu_fn
[ 2.569217] Call Trace:
[ 2.569220] <TASK>
[ 2.569221] dump_stack_lvl+0x5d/0x80[ 2.569225] ubsan_epilogue+0x5/0x2b
[ 2.569229] __ubsan_handle_out_of_bounds.cold+0x54/0x59[ 2.569232] radeon_atombios_get_power_modes+0x8d6/0x900 [radeon]
[ 2.569310] radeon_pm_init+0x142/0x760 [radeon]
[ 2.569396] cik_init+0x21d/0x550 [radeon]
[ 2.569485] radeon_device_init+0x563/0xba0 [radeon][ 2.569552] ? pci_find_capability+0x79/0xb0
[ 2.569556] radeon_driver_load_kms+0xa1/0x260 [radeon]
[ 2.569624] radeon_pci_probe+0x177/0x230 [radeon]
[ 2.569691] local_pci_probe+0x42/0x90[ 2.569695] work_for_cpu_fn+0x1a/0x30
[ 2.569697] process_one_work+0x192/0x350
[ 2.569701] worker_thread+0x25a/0x3a0
[ 2.569703] ? __pfx_worker_thread+0x10/0x10
[ 2.569705] kthread+0xfc/0x240
[ 2.569707] ? __pfx_kthread+0x10/0x10
[ 2.569708] ? __pfx_kthread+0x10/0x10
[ 2.569709] ret_from_fork+0x197/0x1c0
[ 2.569712] ? __pfx_kthread+0x10/0x10
[ 2.569714] ret_from_fork_asm+0x1a/0x30
[ 2.569717] </TASK>
[ 2.569718] ---[ end trace ]---
[ 2.569764] ------------[ cut here ]------------
[ 2.569766] UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.9/drivers/gpu/drm/radeon/ci_dpm.c:5569:32
[ 2.569771] index 9 is out of range for type 'UCHAR [*]'
[ 2.569774] CPU: 0 UID: 0 PID: 249 Comm: kworker/0:3 Not tainted 6.17.9+deb14-amd64 #1 PREEMPT(lazy) Debian 6.17.9-1
[ 2.569776] Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A99X EVO R2.0, BIOS 2501 04/03/2014
[ 2.569777] Workqueue: events work_for_cpu_fn
[ 2.569780] Call Trace:
[ 2.569781] <TASK>
[ 2.569781] dump_stack_lvl+0x5d/0x80
[ 2.569784] ubsan_epilogue+0x5/0x2b
[ 2.569786] __ubsan_handle_out_of_bounds.cold+0x54/0x59
[ 2.569789] ci_dpm_init+0x19f3/0x1ad0 [radeon]
[ 2.569870] radeon_pm_init+0x53c/0x760 [radeon]
[ 2.569956] cik_init+0x21d/0x550 [radeon]
[ 2.570045] radeon_device_init+0x563/0xba0 [radeon]
[ 2.570112] ? pci_find_capability+0x79/0xb0
[ 2.570115] radeon_driver_load_kms+0xa1/0x260 [radeon]
[ 2.570183] radeon_pci_probe+0x177/0x230 [radeon]
[ 2.570249] local_pci_probe+0x42/0x90
[ 2.570252] work_for_cpu_fn+0x1a/0x30
[ 2.570254] process_one_work+0x192/0x350
[ 2.570257] worker_thread+0x25a/0x3a0
[ 2.570259] ? __pfx_worker_thread+0x10/0x10
[ 2.570261] kthread+0xfc/0x240
[ 2.570262] ? __pfx_kthread+0x10/0x10
[ 2.570263] ? __pfx_kthread+0x10/0x10
[ 2.570265] ret_from_fork+0x197/0x1c0
[ 2.570267] ? __pfx_kthread+0x10/0x10
[ 2.570268] ret_from_fork_asm+0x1a/0x30
[ 2.570271] </TASK>
[ 2.570272] ---[ end trace ]---
* What outcome did you expect instead?
No UBSAN traces.
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.17.9+deb14-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-15 (Debian 15.2.0-9) 15.2.0, GNU ld (GNU Binutils for Debian) 2.45) #1 SMP PREEMPT_DYNAMIC Debian 6.17.9-1 (2025-11-26)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.17.9+deb14-amd64 root=UUID=2b3b6888-53fe-4618-a096-5ac8a0714864 ro quiet
** Not tainted
** Kernel log:
[ 9.616312] systemd[1]: Starting console-setup.service - Set console font and keymap...
[ 9.617403] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
[ 9.623208] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
[ 9.628059] systemd[1]: Started systemd-timesyncd.service - Network Time Synchronization.
[ 9.628212] systemd[1]: Reached target time-set.target - System Time Set.
[ 9.630163] systemd[1]: Finished console-setup.service - Set console font and keymap.
[ 9.633585] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 390 (systemd-binfmt)
[ 9.642243] systemd[1]: Received SIGRTMIN+20 from PID 292 (plymouthd).
[ 9.643654] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
[ 9.664023] systemd[1]: Started systemd-journald.service - Journal Service.
[ 9.671281] audit: type=1400 audit(1765115707.619:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=400 comm="apparmor_parser"
[ 9.671404] audit: type=1400 audit(1765115707.619:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=404 comm="apparmor_parser"
[ 9.671591] audit: type=1400 audit(1765115707.619:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=406 comm="apparmor_parser"
[ 9.671997] audit: type=1400 audit(1765115707.619:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=405 comm="apparmor_parser"
[ 9.672001] audit: type=1400 audit(1765115707.619:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=402 comm="apparmor_parser"
[ 9.672147] audit: type=1400 audit(1765115707.623:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=399 comm="apparmor_parser"
[ 9.672899] audit: type=1400 audit(1765115707.623:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=401 comm="apparmor_parser"
[ 9.674550] audit: type=1400 audit(1765115707.623:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=419 comm="apparmor_parser"
[ 9.674578] audit: type=1400 audit(1765115707.623:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=421 comm="apparmor_parser"
[ 9.674758] audit: type=1400 audit(1765115707.623:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=423 comm="apparmor_parser"
[ 9.701130] systemd-journald[355]: Received client request to flush runtime journal.
[ 10.027883] random: crng init done
[ 10.159714] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 10.176980] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 10.189925] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 10.399935] at24 0-0050: supply vcc not found, using dummy regulator
[ 10.413664] at24 0-0050: 256 byte spd EEPROM, read-only
[ 10.413709] at24 0-0051: supply vcc not found, using dummy regulator
[ 10.413748] acpi_cpufreq: overriding BIOS provided _PSD data
[ 10.414928] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.423890] at24 0-0051: 256 byte spd EEPROM, read-only
[ 10.423991] at24 0-0052: supply vcc not found, using dummy regulator
[ 10.436833] at24 0-0052: 256 byte spd EEPROM, read-only
[ 10.439093] at24 0-0053: supply vcc not found, using dummy regulator
[ 10.467956] at24 0-0053: 256 byte spd EEPROM, read-only
[ 10.472689] mc: Linux media interface: v0.10
[ 10.530336] Bluetooth: Core ver 2.22
[ 10.530363] NET: Registered PF_BLUETOOTH protocol family
[ 10.530365] Bluetooth: HCI device and connection manager initialized
[ 10.530369] Bluetooth: HCI socket layer initialized
[ 10.530373] Bluetooth: L2CAP socket layer initialized
[ 10.530381] Bluetooth: SCO socket layer initialized
[ 10.552189] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 10.558748] asus_wmi: ASUS WMI generic driver loaded
[ 10.572597] asus_wmi: failed to register LPS0 sleep handler in asus-wmi
[ 10.572668] asus_wmi: Initialization: 0x0
[ 10.572696] asus_wmi: BIOS WMI version: 0.9
[ 10.572741] asus_wmi: SFUN value: 0x0
[ 10.572745] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 10.574457] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 10.597986] videodev: Linux video capture interface: v2.00
[ 10.620683] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon])
[ 10.632124] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 10.637976] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 10.673358] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 10.685650] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 10.686669] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 10.686742] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 10.724381] usbcore: registered new interface driver btusb
[ 10.725189] snd_hda_codec_alc662 hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 10.725195] snd_hda_codec_alc662 hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.725198] snd_hda_codec_alc662 hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 10.725201] snd_hda_codec_alc662 hdaudioC0D0: mono: mono_out=0x0
[ 10.725202] snd_hda_codec_alc662 hdaudioC0D0: dig-out=0x11/0x1e
[ 10.725204] snd_hda_codec_alc662 hdaudioC0D0: inputs:
[ 10.725206] snd_hda_codec_alc662 hdaudioC0D0: Rear Mic=0x18
[ 10.725207] snd_hda_codec_alc662 hdaudioC0D0: Front Mic=0x19
[ 10.725209] snd_hda_codec_alc662 hdaudioC0D0: Line=0x1a
[ 10.743260] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 10.743333] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 10.743400] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 10.743471] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 10.743539] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 10.743619] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 10.743692] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 10.743770] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 10.757261] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb
[ 10.757267] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10
[ 10.779271] usbcore: registered new interface driver snd-usb-audio
[ 10.781178] usb 2-3: Found UVC 1.00 device Microsoft\xc2\xae LifeCam HD-5000 (045e:076d)
[ 10.836124] usbcore: registered new interface driver uvcvideo
[ 10.847926] kvm_amd: TSC scaling supported
[ 10.847930] kvm_amd: Nested Virtualization enabled
[ 10.847933] kvm_amd: Nested Paging enabled
[ 10.847935] kvm_amd: LBR virtualization supported
[ 10.866964] MCE: In-kernel MCE decoding enabled.
[ 11.251198] NET: Registered PF_QIPCRTR protocol family
[ 11.284957] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.295543] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 11.295774] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 11.296025] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.296252] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 11.369156] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 11.522684] r8169 0000:02:00.0 enp2s0: Link is Down
[ 14.296151] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.021297] kauditd_printk_skb: 110 callbacks suppressed
[ 18.021302] audit: type=1400 audit(1765115715.971:122): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1056 comm="apparmor_parser"
[ 18.098582] evm: overlay not supported
[ 18.455983] Initializing XFRM netlink socket
[ 18.509916] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2501
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A99X EVO R2.0
board_version: Rev 1.xx
** Configuration for modprobe:
blacklist microcode
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
** Loaded modules:
tls
xt_conntrack
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
bridge
stp
llc
xfrm_user
xfrm_algo
xt_addrtype
nft_compat
x_tables
nf_tables
overlay
qrtr
cfg80211
nls_ascii
nls_cp437
vfat
fat
edac_mce_amd
kvm_amd
binfmt_misc
uvcvideo
ccp
videobuf2_vmalloc
btusb
snd_hda_codec_alc662
uvc
kvm
videobuf2_memops
snd_hda_codec_atihdmi
btrtl
videobuf2_v4l2
snd_usb_audio
snd_hda_codec_realtek_lib
snd_hda_codec_hdmi
snd_hda_codec_generic
btintel
videodev
eeepc_wmi
snd_usbmidi_lib
btbcm
asus_wmi
snd_hda_intel
irqbypass
btmtk
snd_rawmidi
sparse_keymap
ghash_clmulni_intel
snd_hda_codec
videobuf2_common
snd_seq_device
platform_profile
bluetooth
battery
mc
aesni_intel
snd_hda_core
wmi_bmof
snd_intel_dspcfg
snd_intel_sdw_acpi
snd_hwdep
acpi_cpufreq
pcspkr
ecdh_generic
at24
snd_pcm
k10temp
fam15h_power
snd_timer
rfkill
snd
joydev
soundcore
evdev
sg
lp
ppdev
parport_pc
parport
efi_pstore
configfs
nfnetlink
autofs4
ext4
mbcache
jbd2
crc32c_cryptoapi
amdgpu
amdxcp
gpu_sched
drm_panel_backlight_quirks
drm_buddy
crc16
radeon
hid_generic
usbhid
drm_ttm_helper
hid
ttm
sr_mod
cdrom
drm_exec
sd_mod
i2c_algo_bit
drm_suballoc_helper
drm_display_helper
cec
rc_core
ahci
xhci_pci
drm_client_lib
ohci_pci
drm_kms_helper
r8169
libahci
ehci_pci
mxm_wmi
realtek
xhci_hcd
ehci_hcd
libata
sp5100_tco
drm
mdio_devres
ohci_hcd
watchdog
e100
libphy
usbcore
mii
scsi_mod
video
i2c_piix4
mdio_bus
wmi
button
i2c_smbus
usb_common
scsi_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16] (prog-if 00 [Normal decode])
DeviceName: Onboard IGD
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: fea00000-feafffff [size=1M] [32-bit]
Prefetchable memory behind bridge: c0000000-d07fffff [size=264M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18] (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: d0a00000-d0afffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) [1002:5a19] (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe900000-fe9fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2) [1002:5a1a] (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: c000-cfff [size=4K] [16-bit]
Memory behind bridge: fe800000-fe8fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3) [1002:5a1b] (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:5a14]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe700000-fe7fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M5A99X EVO (R1.0) SB950 [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
NUMA node: 0
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) (prog-if 00 [HDA compatible])
Subsystem: ASUSTeK Computer Inc. Device [1043:84fb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: b000-bfff [size=4K] [16-bit]
Memory behind bridge: fe500000-fe6fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: d0900000-d09fffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
NUMA node: 0
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290/390] [1002:67b1] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:e285]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
NUMA node: 0
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at fea00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] [1002:aac8] (prog-if 00 [HDA compatible])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aac8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 56
NUMA node: 0
Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
NUMA node: 0
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0a04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0a00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
NUMA node: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
NUMA node: 0
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
NUMA node: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
06:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 04)
Subsystem: Intel Corporation 82558B PRO/100+ PCI (TP) [8086:0009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at d0900000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=32]
Region 2: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe500000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 045e:076d Microsoft Corp. LifeCam HD-5000
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 145f:026e Trust GXT 133 Gaming Mouse
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c328 Logitech, Inc. Corded Keyboard K280e
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: forky/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 6.17.9+deb14-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.17.9+deb14-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.150
ii kmod 34.2-2
ii linux-base 4.14
Versions of packages linux-image-6.17.9+deb14-amd64 recommends:
ii apparmor 4.1.0-1+b1
Versions of packages linux-image-6.17.9+deb14-amd64 suggests:
pn debian-kernel-handbook <none>
pn firmware-linux-free <none>
ii grub-pc 2.14~git20250718.0e36779-2
pn linux-doc-6.17 <none>
Versions of packages linux-image-6.17.9+deb14-amd64 is related to:
ii firmware-amd-graphics 20251111-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
pn firmware-intel-graphics <none>
ii firmware-intel-misc 20251111-1
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
pn firmware-mediatek <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
pn firmware-nvidia-graphics <none>
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
ii firmware-realtek 20251111-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: