Bug#1116251: linux-image-6.12.48+deb13-rpi: Raspberry Pi Zero W does not boot
Package: src:linux
Version: 6.12.48-1
Severity: normal
X-Debbugs-Cc: bdrung@debian.org
Hi,
I have three Raspberry Pi Zero W running trixie headless. All stopped
working after upgrading to linux-image-6.12.48+deb13-rpi. Since they are
headless, I removed the SD card and checked the logs on there. The last
logs where from upgrading to linux-image-6.12.48+deb13-rpi and the
shutdown (from the reboot). There were no logs from the
linux-image-6.12.48+deb13-rpi boot. So it probably failed to boot in the
kernel or initrd (before switching to the root fs).
I changed the kernel+initrd in /boot/firmware/config.txt from
6.12.48+deb13-rpi to 6.12.43+deb13-rpi and then the system worked again.
I checked that content of the initrd looks okay (only the kernel module
versions differ).
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
Hardware : BCM2835
Revision : 0000
Device Tree model: Raspberry Pi Zero W Rev 1.1
** Configuration for modprobe:
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
options dma dmachans=0x7ff5
options bcm2708 boardrev=0x9000c1
options bcm2708 serial=0x8bb1238
options bcm2708 uart_clock=48000000
options bcm2708 disk_led_gpio=47
options smsc95xx macaddr=B8:27:EB:BB:12:38
options vc_mem mem_base=0x1ec00000
options vc_mem mem_size=0x20000000
options fsck repair=yes
options net ifnames=0
** Network interface configuration:
*** /etc/network/interfaces:
source-directory /etc/network/interfaces.d
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid Skynet
wpa-psk **********************
** PCI devices:
not available
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 13.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500,
'stable')
Architecture: armel (armv6l)
Kernel: Linux 6.12.43+deb13-rpi (UP)
Kernel taint flags: TAINT_CRAP
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE
not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.12.48+deb13-rpi depends on:
ii initramfs-tools [linux-initramfs-tool] 0.148.3
ii kmod 34.2-2
ii linux-base 4.12
Versions of packages linux-image-6.12.48+deb13-rpi recommends:
ii apparmor 4.1.0-1
Versions of packages linux-image-6.12.48+deb13-rpi suggests:
pn debian-kernel-handbook <none>
ii firmware-linux-free 20241210-2
pn linux-doc-6.12 <none>
Versions of packages linux-image-6.12.48+deb13-rpi is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20250410-2
pn firmware-cavium <none>
pn firmware-cirrus <none>
pn firmware-intel-graphics <none>
pn firmware-intel-misc <none>
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
pn firmware-mediatek <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
pn firmware-nvidia-graphics <none>
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
Benjamin Drung
Debian & Ubuntu Developer
Reply to: