Bug#1114557: [regression] 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") causes issue with ID 4c4a:4155 Jieli Technology USB Composite Device

[Staffan Melin <staffan.melin@oscillator.se>]

Thank you for the patches!

Unfortunately I could not apply v3, I got an error message.

While I could apply patch v4 and compile and test it, same result as 
before -- no working touchscreen, and touchscreen not visible on xinput 
--list. This was on 6.16.7.

Best regards,

Staffan


On 2025-09-18 16:05, zhangheng wrote:
> It's interesting that I found another USB device with the same ID, but
> it's a USB headphone, device descriptors in headphone.txt
>
> Microphone.txt is the device descriptor for SMARTLINKTechnology.
>
> I was originally planning to differentiate according to bcdHID, but
> there is hdev ->version=0x100, therefore, I created the v3 patch.
>
> The microphone device is normal, but I'm not sure if your touchscreen
> function is working properly.
>
> [   67.417805] usb 1-3.4.2: new full-speed USB device number 11 using
> xhci_hcd
> [   67.566700] usb 1-3.4.2: New USB device found, idVendor=4c4a,
> idProduct=4155, bcdDevice= 1.00
> [   67.566707] usb 1-3.4.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [   67.566712] usb 1-3.4.2: Product: USB Composite Device
> [   67.566717] usb 1-3.4.2: Manufacturer: SmartlinkTechnology
> [   67.566721] usb 1-3.4.2: SerialNumber: 20201111000001
> [   67.568816] DEBUG: drivers/hid/hid-quirks.c 1227 hid_gets_squirk
> hdev->version = 0x100
> [   67.568827] DEBUG: drivers/hid/hid-quirks.c 1025 hid_ignore
> hdev->version = 0x100
> [   67.568832] DEBUG: drivers/hid/hid-quirks.c 1227 hid_gets_squirk
> hdev->version = 0x100
> [   67.569256] DEBUG: drivers/hid/hid-quirks.c 1227 hid_gets_squirk
> hdev->version = 0x201
>
> [   39.692821] DEBUG: drivers/hid/usbhid/hid-core.c 985 usbhid_parse
> dev->serial = 20201111000001
>
>  Later, I thought of using a serial number, Later, I thought of using
> a serial number, but the headphone serial number was NULL,
>
> and printing it directly would trigger OOPs, at present, I can only
> consider distinguishing between manufacturers, this is v4 patch.
>
> If there are better ideas or patches, they can also be provided. The
> microphone device will arrive in a few days, and I will verify it
> then.
>
> 在 2025/9/16 7:06, Terry Junge 写道:
>
> > On 9/15/25 1:37 AM, zhangheng wrote:
> >
> > > Apply this new patch and test the kernel again. I don't have the
> > > original mic device in my hands, which means I have to wait for a
> > > response for testing now.
> > >
> > > You can test it first, and the other mic device also needs to be
> > > retested
> >
> > Your patch will not work as you expect for two reasons.
> >
> > if (hid_match_id(hdev, hid_ignore_list) ||
> > (hid_match_id(hdev, hid_ignore_mic) && (hdev->version >
> > 1.1)))
> > quirks |= HID_QUIRK_IGNORE;
> >
> > hdev->version is U32 not float. Version (bcdDevice) 1.00 would be
> > 0x0100. The value 1.1 is probably cast to 0x0001.
> >
> > Second, both devices have identical VID, PID, bcdDevice, and Product
> > names.
> >
> > [  563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a,
> > idProduct=4155, bcdDevice= 1.00
> > [  563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1,
> > Product=2, SerialNumber=3
> > [  563.104911] usb 1-1.4.1.2: Product: USB Composite Device
> > [  563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
> > [  563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
> >
> > [   10.451534] usb 3-3: New USB device found, idVendor=4c4a,
> > idProduct=4155, bcdDevice= 1.00
> > [   10.451540] usb 3-3: New USB device strings: Mfr=1, Product=2,
> > SerialNumber=3
> > [   10.451543] usb 3-3: Product: USB Composite Device
> > [   10.451545] usb 3-3: Manufacturer: Jieli Technology
> > [   10.451546] usb 3-3: SerialNumber: FFFFFFFFFFFFFFFF
> >
> > If you could get the descriptors for the microphone device, it would
> > be helpful.
> >
> > Thanks,
> > Terry
> >
> > 在 2025/9/13 21:11, Staffan Melin 写道:
> >
> > Ah, thanks, I get it now :)
> >
> > So I got 6.16.7, and the patch applied without problems.
> >
> > But no luck, the same results as before: touchscreen not working,
> > xinput --list not showing the Jieli touchscreen. dmesg shows the
> > same as before, too.
> >
> > Best regards,
> >
> > Staffan
> >
> > On 2025-09-13 10:55, Salvatore Bonaccorso wrote:
> >
> > Hi Staffan,
> >
> > chiming in hopefully it is of help.
> >
> > Now really with the patch ...
> >
> > On Fri, Sep 12, 2025 at 09:57:04PM +0200, Staffan Melin wrote:
> >
> > Thank you,
> >
> > I tried to apply this patch to 6.12.39, the first problematic
> > kernel, as
> > well as 6.12.41, the first bad I tried, and on both I got an error
> > message:
> >
> > Applying: HID: quirks: Add device descriptor for 4c4a:4155
> > error: patch failed: drivers/hid/hid-quirks.c:1068
> > error: drivers/hid/hid-quirks.c: patch does not apply
> > Patch failed at 0001 HID: quirks: Add device descriptor for
> > 4c4a:4155
> >
> > To which kernel version should I apply the patch?
> >
> > As the deveopment goes from mainline then down to stable series, the
> > fix needs to be developed first for mainline. So the patch is
> > targeted
> > there.
> >
> > But please find attached an updated patch which hopefully should
> > work
> > which resolved the context changes on top of 6.12.47.
> >
> > But ideally you can provide a Tested-by on zhangheng's mainline
> > patch
> > to get things rolling as needed.
> >
> > Regards,
> > Salvatore