Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu

To: Joe Knowbody <joe2014knowbody@gmail.com>, 1107299@bugs.debian.org, 1107299-done@bugs.debian.org
Subject: Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu
From: Salvatore Bonaccorso <carnil@debian.org>
Date: Sun, 15 Jun 2025 14:37:57 +0200
Message-id: <[🔎] aE6-pUBhXEwzhiI_@eldamar.lan>
Reply-to: Salvatore Bonaccorso <carnil@debian.org>, 1107299@bugs.debian.org
In-reply-to: <faca8949-7123-484d-b45f-d24e1d21666c@gmail.com>
References: <[🔎] 174909048295.3568.17537354064606541420.reportbug@white.joes.domain.org> <[🔎] aEtCKd6M2Iyc5Y7V@eldamar.lan> <6438794c-cf5e-4342-9f01-8260103c8911@gmail.com> <aExcbfSUY54zZ3xb@eldamar.lan> <faca8949-7123-484d-b45f-d24e1d21666c@gmail.com> <[🔎] 174909048295.3568.17537354064606541420.reportbug@white.joes.domain.org>
Source: linux
Source-Version: 6.12.30-1

Control: tags -1 - moreinfo

Hi Joe,

On Sun, Jun 15, 2025 at 10:33:13AM +1000, Joe Knowbody wrote:
> Hello Salvatore,
> 
>    I installed kernel 6.12.30-amd64 and tested it and it works flawlessly on
> my Hp Elitebook 6930p.
> 
> I tried to replicate previous issues. I had Thunderbird running as well as
> goodvibes and I would close lid
> 
> leave it a while, reopen it and this time no hangups or crashes. It would
> resume straight away without
> 
> any complications. I've allowed it to suspend automatically after 15min and
> again resumed and same
> 
> results. I've repeated this a good number of times, I can say that whatever
> caused the issue previously has
> 
> been resolved.
> 
> I'm happy to install this version of Debian Trixie on my Hp Elitebook 8460p
> (my production machine) and
> 
>  report. Also if you wish I can test the kernel 6.12.32-1 on my 6930p. I'm
> happy to help anyway I can, just
> 
> let me know.
> 
> --------------------------------------------------------------------------------------------------------------
> 
> 
> $sudo inxi -e
> 
> System: Host: blue Kernel: 6.12.30-amd64 arch: x86_64 bits: 64 Desktop:
> GNOME v: 48.1 Distro: Debian GNU/Linux 13 (trixie) Machine: Type: Laptop
> System: Hewlett-Packard product: HP EliteBook 6930p v: F.16 serial:
> SGH008RJP0 Mobo: Hewlett-Packard model: 30DB v: KBC Version 87.2A serial:
> SGH008RJP0 BIOS: Hewlett-Packard v: 68PCU Ver. F.16 date: 12/08/2009
> Battery: ID-1: BAT0 charge: 16.7 Wh (100.0%) condition: 16.7/56.2 Wh (29.7%)
> CPU: Info: dual core model: Intel Core2 Duo P8600 bits: 64 type: MCP cache:
> L2: 3 MiB Speed (MHz): avg: 800 min/max: 800/2401 cores: 1: 800 2: 800
> Graphics: Device-1: Intel Mobile 4 Series Integrated Graphics driver: i915
> v: kernel Device-2: Chicony CKA7216 driver: uvcvideo type: USB Display:
> unspecified server: X.Org v: 24.1.6 with: Xwayland v: 24.1.6 driver: dri:
> crocus gpu: i915 resolution: 1280x800~60Hz API: EGL v: 1.5 drivers:
> crocus,swrast platforms: gbm,x11,surfaceless,device API: OpenGL v: 4.5
> compat-v: 2.1 vendor: intel mesa v: 25.0.5-2 renderer: Mesa Mobile Intel
> GM45 Express (CTG) Info: Tools: api: eglinfo,glxinfo x11: xdriinfo,
> xdpyinfo, xprop, xrandr Audio: Device-1: Intel 82801I HD Audio driver:
> snd_hda_intel API: ALSA v: k6.12.30-amd64 status: kernel-api Network:
> Device-1: Intel 82567LM Gigabit Network driver: e1000e IF: enp0s25 state:
> down mac: d8:d3:85:99:70:a7 Device-2: Intel Ultimate N WiFi Link 5300
> driver: iwlwifi IF: wls1 state: up mac: 00:21:6a:a9:a0:d2 Bluetooth:
> Device-1: HP Bluetooth 2.0 Interface [Broadcom BCM2045] driver: btusb type:
> USB Report: hciconfig ID: hci0 state: up address: 00:27:13:70:A6:DF bt-v:
> 2.0 Drives: Local Storage: total: 149.05 GiB used: 8.74 GiB (5.9%) ID-1:
> /dev/sda vendor: Seagate model: ST9160412AS size: 149.05 GiB Partition:
> ID-1: / size: 141.87 GiB used: 8.74 GiB (6.2%) fs: ext4 dev: /dev/sda1 Swap:
> ID-1: swap-1 type: partition size: 3.84 GiB used: 0 KiB (0.0%) dev:
> /dev/sda5 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A Fan Speeds
> (rpm): N/A Info: Memory: total: 4 GiB available: 3.67 GiB used: 1.58 GiB
> (43.0%) igpu: 64 MiB Processes: 205 Uptime: 1h 23m Shell: Sudo inxi: 3.3.38
> 
> --------------------------------------------------------------------------------------------------------------------
> 
> 
> $sudo dmesg
> 
> [ 0.017325] ACPI: Reserving TCPA table memory at [mem 0xb9ff7000-0xb9ff7031]
> [ 0.017326] ACPI: Reserving SSDT table memory at [mem 0xb9fda000-0xb9fda2dc]
> [ 0.017327] ACPI: Reserving SLIC table memory at [mem 0xb9fd8000-0xb9fd8175]
> [ 0.017328] ACPI: Reserving DMAR table memory at [mem 0xb9fd7000-0xb9fd70bf]
> [ 0.017330] ACPI: Reserving ASF! table memory at [mem 0xb9ff8000-0xb9ff8094]
> [ 0.017331] ACPI: Reserving SSDT table memory at [mem 0xb9fd6000-0xb9fd666b]
> [ 0.017332] ACPI: Reserving SSDT table memory at [mem 0xb9fd5000-0xb9fd5287]
> [ 0.017334] ACPI: Reserving SSDT table memory at [mem 0xb9fd4000-0xb9fd4224]
> [ 0.017506] No NUMA configuration found [ 0.017508] Faking a node at [mem
> 0x0000000000000000-0x000000013bffffff] [ 0.017523] NODE_DATA(0) allocated
> [mem 0x13bfd5680-0x13bffffff] [ 0.017966] Zone ranges: [ 0.017967] DMA [mem
> 0x0000000000001000-0x0000000000ffffff] [ 0.017969] DMA32 [mem
> 0x0000000001000000-0x00000000ffffffff] [ 0.017972] Normal [mem
> 0x0000000100000000-0x000000013bffffff] [ 0.017974] Device empty [ 0.017975]
> Movable zone start for each node [ 0.017978] Early memory node ranges [
> 0.017979] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.017981]
> node 0: [mem 0x0000000000100000-0x00000000b4f2efff] [ 0.017983] node 0: [mem
> 0x00000000b4f31000-0x00000000b5d6ffff] [ 0.017985] node 0: [mem
> 0x00000000b5d80000-0x00000000b84b8fff] [ 0.017986] node 0: [mem
> 0x00000000b86b9000-0x00000000b9e92fff] [ 0.017987] node 0: [mem
> 0x00000000b9e9b000-0x00000000b9ebefff] [ 0.017989] node 0: [mem
> 0x00000000b9fff000-0x00000000b9ffffff] [ 0.017990] node 0: [mem
> 0x0000000100000000-0x000000013bffffff] [ 0.017993] Initmem setup node 0 [mem
> 0x0000000000001000-0x000000013bffffff] [ 0.018001] On node 0, zone DMA: 1
> pages in unavailable ranges [ 0.018058] On node 0, zone DMA: 97 pages in
> unavailable ranges [ 0.039049] On node 0, zone DMA32: 2 pages in unavailable
> ranges [ 0.039342] On node 0, zone DMA32: 16 pages in unavailable ranges [
> 0.039541] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.039545]
> On node 0, zone DMA32: 8 pages in unavailable ranges [ 0.039556] On node 0,
> zone DMA32: 320 pages in unavailable ranges [ 0.041273] On node 0, zone
> Normal: 24576 pages in unavailable ranges [ 0.041740] On node 0, zone
> Normal: 16384 pages in unavailable ranges [ 0.041751] Reserving Intel
> graphics memory at [mem 0xbc000000-0xbfffffff] [ 0.042098] ACPI: PM-Timer IO
> Port: 0x408 [ 0.042112] CPU topo: Ignoring hot-pluggable APIC ID 0 in
> present package. [ 0.042115] ACPI: LAPIC_NMI (acpi_id[0x00] high edge
> lint[0x1]) [ 0.042118] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [
> 0.042119] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.042120]
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.042136] IOAPIC[0]:
> apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.042140] ACPI:
> INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.042143] ACPI:
> INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.042149] ACPI:
> Using ACPI (MADT) for SMP configuration information [ 0.042151] ACPI: HPET
> id: 0x8086a201 base: 0xfed00000 [ 0.042166] CPU topo: Max. logical packages:
> 1 [ 0.042168] CPU topo: Max. logical dies: 1 [ 0.042169] CPU topo: Max. dies
> per package: 1 [ 0.042175] CPU topo: Max. threads per core: 1 [ 0.042177]
> CPU topo: Num. cores per package: 2 [ 0.042177] CPU topo: Num. threads per
> package: 2 [ 0.042178] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
> [ 0.042179] CPU topo: Rejected CPUs 2 [ 0.042213] PM: hibernation:
> Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.042216] PM:
> hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [
> 0.042219] PM: hibernation: Registered nosave memory: [mem
> 0xb4f2f000-0xb4f30fff] [ 0.042221] PM: hibernation: Registered nosave
> memory: [mem 0xb5d70000-0xb5d7ffff] [ 0.042224] PM: hibernation: Registered
> nosave memory: [mem 0xb84b9000-0xb86b8fff] [ 0.042226] PM: hibernation:
> Registered nosave memory: [mem 0xb9e93000-0xb9e9afff] [ 0.042229] PM:
> hibernation: Registered nosave memory: [mem 0xb9ebf000-0xb9ffefff] [
> 0.042232] PM: hibernation: Registered nosave memory: [mem
> 0xba000000-0xffffffff] [ 0.042234] [mem 0xc0000000-0xdfffffff] available for
> PCI devices [ 0.042236] Booting paravirtualized kernel on bare hardware [
> 0.042241] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.052700] setup_percpu:
> NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.053628]
> percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u1048576 [ 0.053639]
> pcpu-alloc: s233472 r8192 d28672 u1048576 alloc=1*2097152 [ 0.053643]
> pcpu-alloc: [0] 0 1 [ 0.053673] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-6.12.30-amd64
> root=UUID=4b1378ff-7e5c-4646-8564-22b0c96fd3f8 ro quiet [ 0.053748] Unknown
> kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.30-amd64",
> will be passed to user space. [ 0.055400] Dentry cache hash table entries:
> 524288 (order: 10, 4194304 bytes, linear) [ 0.056373] Inode-cache hash table
> entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.056460] Fallback order
> for Node 0: 0 [ 0.056469] Built 1 zonelists, mobility grouping on. Total
> pages: 1006660 [ 0.056471] Policy zone: Normal [ 0.056487] mem auto-init:
> stack:all(zero), heap alloc:on, heap free:off [ 0.056501] DMAR: [Firmware
> Bug]: Your BIOS is broken; DMAR reported at address 0! BIOS vendor:
> Hewlett-Packard; Ver: 68PCU Ver. F.16; Product Version: F.16 [ 0.056506]
> software IO TLB: area num 2. [ 0.154890] SLUB: HWalign=64, Order=0-3,
> MinObjects=0, CPUs=2, Nodes=1 [ 0.155063] Kernel/User page tables isolation:
> enabled [ 0.155197] ftrace: allocating 45689 entries in 179 pages [
> 0.166091] ftrace: allocated 179 pages with 5 groups [ 0.167241] Dynamic
> Preempt: voluntary [ 0.167401] rcu: Preemptible hierarchical RCU
> implementation. [ 0.167403] rcu: RCU restricting CPUs from NR_CPUS=8192 to
> nr_cpu_ids=2. [ 0.167405] Trampoline variant of Tasks RCU enabled. [
> 0.167406] Rude variant of Tasks RCU enabled. [ 0.167406] Tracing variant of
> Tasks RCU enabled. [ 0.167408] rcu: RCU calculated value of
> scheduler-enlistment delay is 25 jiffies. [ 0.167409] rcu: Adjusting
> geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.167418] RCU Tasks: Setting
> shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.167421]
> RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1
> rcu_task_cpu_ids=2. [ 0.167423] RCU Tasks Trace: Setting shift to 1 and lim
> to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.175799] NR_IRQS: 524544,
> nr_irqs: 440, preallocated irqs: 16 [ 0.176048] rcu: srcu_init: Setting
> srcu_struct sizes based on contention. [ 0.178069] Console: colour VGA+
> 80x25 [ 0.178073] printk: legacy console [tty0] enabled [ 0.178350] ACPI:
> Core revision 20240827 [ 0.178608] clocksource: hpet: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.178627] APIC:
> Switch to symmetric I/O mode setup [ 0.178631] DMAR: Host address width 36 [
> 0.178633] DMAR: DRHD base: 0x00000000000000 flags: 0x1 [ 0.178636] DMAR:
> Parse DMAR table failure. [ 0.179070] ..TIMER: vector=0x30 apic1=0 pin1=2
> apic2=-1 pin2=-1 [ 0.198626] clocksource: tsc-early: mask:
> 0xffffffffffffffff max_cycles: 0x228200ac089, max_idle_ns: 440795246694 ns [
> 0.198636] Calibrating delay loop (skipped), value calculated using timer
> frequency.. 4787.96 BogoMIPS (lpj=9575920) [ 0.198652] Disabled fast string
> operations [ 0.198659] x86/cpu: VMX (outside TXT) disabled by BIOS [
> 0.198742] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.198745] Last
> level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.198750] process: using
> mwait in idle threads [ 0.198753] Spectre V1 : Mitigation: usercopy/swapgs
> barriers and __user pointer sanitization [ 0.198756] Spectre V2 :
> Mitigation: Retpolines [ 0.198758] Spectre V2 : Spectre v2 / SpectreRSB:
> Filling RSB on context switch and VMEXIT [ 0.198760] Speculative Store
> Bypass: Vulnerable [ 0.198763] MDS: Vulnerable: Clear CPU buffers attempted,
> no microcode [ 0.198764] MMIO Stale Data: Unknown: No mitigations [
> 0.198770] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
> registers' [ 0.198772] x86/fpu: Supporting XSAVE feature 0x002: 'SSE
> registers' [ 0.198775] x86/fpu: Enabled xstate features 0x3, context size is
> 576 bytes, using 'standard' format. [ 0.225081] Freeing SMP alternatives
> memory: 40K [ 0.225093] pid_max: default: 32768 minimum: 301 [ 0.225985]
> LSM: initializing
> lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [
> 0.226387] landlock: Up and running. [ 0.226389] Yama: disabled by default;
> enable with sysctl kernel.yama.* [ 0.226534] AppArmor: AppArmor initialized
> [ 0.226567] TOMOYO Linux initialized [ 0.226895] LSM support for eBPF active
> [ 0.227278] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes,
> linear) [ 0.227299] Mountpoint-cache hash table entries: 8192 (order: 4,
> 65536 bytes, linear) [ 0.340111] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU
> P8600 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.340629]
> Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
> [ 0.340652] ... version: 2 [ 0.340654] ... bit width: 40 [ 0.340656] ...
> generic registers: 2 [ 0.340657] ... value mask: 000000ffffffffff [
> 0.340659] ... max period: 000000007fffffff [ 0.340660] ... fixed-purpose
> events: 3 [ 0.340661] ... event mask: 0000000700000003 [ 0.340817] signal:
> max sigframe size: 1520 [ 0.343182] rcu: Hierarchical SRCU implementation. [
> 0.343188] rcu: Max phase no-delay instances is 1000. [ 0.343286] Timer
> migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [
> 0.343839] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [
> 0.343909] smp: Bringing up secondary CPUs ... [ 0.344155] smpboot: x86:
> Booting SMP configuration: [ 0.344157] .... node #0, CPUs: #1 [ 0.350744]
> smp: Brought up 1 node, 2 CPUs [ 0.350744] smpboot: Total of 2 processors
> activated (9575.92 BogoMIPS) [ 0.357866] node 0 deferred pages initialised
> in 8ms [ 0.359455] Memory: 3767584K/4026640K available (16384K kernel code,
> 2486K rwdata, 11780K rodata, 4148K init, 4956K bss, 254908K reserved, 0K
> cma-reserved) [ 0.359455] devtmpfs: initialized [ 0.359455] x86/mm: Memory
> block size: 128MB [ 0.359804] ACPI: PM: Registering ACPI NVS region [mem
> 0xb5d70000-0xb5d7ffff] (65536 bytes) [ 0.359816] ACPI: PM: Registering ACPI
> NVS region [mem 0xb84b9000-0xb86b8fff] (2097152 bytes) [ 0.359873] ACPI: PM:
> Registering ACPI NVS region [mem 0xb9ecf000-0xb9fcefff] (1048576 bytes) [
> 0.359977] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
> max_idle_ns: 7645041785100000 ns [ 0.359998] futex hash table entries: 512
> (order: 3, 32768 bytes, linear) [ 0.360551] pinctrl core: initialized
> pinctrl subsystem [ 0.364250] NET: Registered PF_NETLINK/PF_ROUTE protocol
> family [ 0.364671] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic
> allocations [ 0.364902] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool
> for atomic allocations [ 0.365126] DMA: preallocated 512 KiB
> GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.365158] audit:
> initializing netlink subsys (disabled) [ 0.365204] audit: type=2000
> audit(1749942201.184:1): state=initialized audit_enabled=0 res=1 [ 0.365204]
> thermal_sys: Registered thermal governor 'fair_share' [ 0.365204]
> thermal_sys: Registered thermal governor 'bang_bang' [ 0.365204]
> thermal_sys: Registered thermal governor 'step_wise' [ 0.365204]
> thermal_sys: Registered thermal governor 'user_space' [ 0.365204]
> thermal_sys: Registered thermal governor 'power_allocator' [ 0.365204]
> cpuidle: using governor ladder [ 0.365204] cpuidle: using governor menu [
> 0.365204] ACPI FADT declares the system doesn't support PCIe ASPM, so
> disable it [ 0.365204] acpiphp: ACPI Hot Plug PCI Controller Driver version:
> 0.5 [ 0.365204] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for
> domain 0000 [bus 00-ff] [ 0.365204] PCI: ECAM [mem 0xe0000000-0xefffffff]
> reserved as E820 entry [ 0.365204] PCI: Using configuration type 1 for base
> access [ 0.365204] mtrr: your CPUs had inconsistent variable MTRR settings [
> 0.365204] mtrr: probably your BIOS does not setup all CPUs. [ 0.365204]
> mtrr: corrected configuration. [ 0.365204] kprobes: kprobe jump-optimization
> is enabled. All kprobes are optimized if possible. [ 0.392286] HugeTLB:
> registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392292] HugeTLB: 28
> KiB vmemmap can be freed for a 2.00 MiB page [ 0.395152] ACPI: Added
> _OSI(Module Device) [ 0.395154] ACPI: Added _OSI(Processor Device) [
> 0.395156] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.395158] ACPI: Added
> _OSI(Processor Aggregator Device) [ 0.402956] ACPI: 5 ACPI AML tables
> successfully acquired and loaded [ 0.403698] ACPI: [Firmware Bug]: BIOS
> _OSI(Linux) query ignored [ 0.411622] ACPI: Dynamic OEM Table Load: [
> 0.411632] ACPI: SSDT 0xFFFF913980ABAC00 000275 (v01 PmRef Cpu0Ist 00003000
> INTL 20060912) [ 0.412249] ACPI: Dynamic OEM Table Load: [ 0.412257] ACPI:
> SSDT 0xFFFF913980B13800 00057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [
> 0.412972] ACPI: Dynamic OEM Table Load: [ 0.412980] ACPI: SSDT
> 0xFFFF913980A81400 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912) [
> 0.413514] ACPI: Dynamic OEM Table Load: [ 0.413521] ACPI: SSDT
> 0xFFFF9139B4105A80 00008D (v01 PmRef ApCst 00003000 INTL 20060912) [
> 0.414329] ACPI: EC: EC started [ 0.414331] ACPI: EC: interrupt blocked [
> 0.638120] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.638124] ACPI:
> \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.638127]
> ACPI: Interpreter enabled [ 0.638149] ACPI: PM: (supports S0 S3 S4 S5) [
> 0.638151] ACPI: Using IOAPIC for interrupt routing [ 0.638193] PCI: Using
> host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a
> bug [ 0.638195] PCI: Using E820 reservations for host bridge windows [
> 0.638475] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.640153] ACPI:
> \_SB_.PCI0.HDEF.APPR: New power resource [ 0.646672] ACPI:
> \_SB_.PCI0.LPCB.SIO_.COM1.COMP: New power resource [ 0.647384] ACPI:
> \_SB_.PCI0.LPCB.SIO_.LPT0.LPP_: New power resource [ 0.649340] ACPI: PCI
> Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.649349] acpi PNP0A08:00:
> _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [
> 0.649740] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
> [ 0.650828] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
> PCIeCapability] [ 0.650831] acpi PNP0A08:00: FADT indicates ASPM is
> unsupported, using BIOS configuration [ 0.651520] PCI host bridge to bus
> 0000:00 [ 0.651525] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
> window] [ 0.651529] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
> window] [ 0.651531] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff window] [ 0.651534] pci_bus 0000:00: root bus resource
> [mem 0xc0000000-0xdfffffff window] [ 0.651536] pci_bus 0000:00: root bus
> resource [mem 0xf0000000-0xfedfffff window] [ 0.651538] pci_bus 0000:00:
> root bus resource [mem 0xfee01000-0xffffffff window] [ 0.651541] pci_bus
> 0000:00: root bus resource [bus 00-ff] [ 0.651563] pci 0000:00:00.0:
> [8086:2a40] type 00 class 0x060000 conventional PCI endpoint [ 0.651594] pci
> 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.651596]
> pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.651708]
> pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 conventional PCI
> endpoint [ 0.651719] pci 0000:00:02.0: BAR 0 [mem 0xd0000000-0xd03fffff
> 64bit] [ 0.651727] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xcfffffff 64bit
> pref] [ 0.651732] pci 0000:00:02.0: BAR 4 [io 0x7138-0x713f] [ 0.651753] pci
> 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 0.651862] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
> conventional PCI endpoint [ 0.651873] pci 0000:00:02.1: BAR 0 [mem
> 0xd0400000-0xd04fffff 64bit] [ 0.651972] pci 0000:00:03.0: [8086:2a44] type
> 00 class 0x078000 conventional PCI endpoint [ 0.651986] pci 0000:00:03.0:
> BAR 0 [mem 0xd8827000-0xd882700f 64bit] [ 0.652040] pci 0000:00:03.0: PME#
> supported from D0 D3hot D3cold [ 0.652114] pci 0000:00:03.2: [8086:2a46]
> type 00 class 0x010185 conventional PCI endpoint [ 0.652126] pci
> 0000:00:03.2: BAR 0 [io 0x7130-0x7137] [ 0.652132] pci 0000:00:03.2: BAR 1
> [io 0x714c-0x714f] [ 0.652137] pci 0000:00:03.2: BAR 2 [io 0x7128-0x712f] [
> 0.652142] pci 0000:00:03.2: BAR 3 [io 0x7148-0x714b] [ 0.652148] pci
> 0000:00:03.2: BAR 4 [io 0x7100-0x710f] [ 0.652242] pci 0000:00:03.3:
> [8086:2a47] type 00 class 0x070002 conventional PCI endpoint [ 0.652254] pci
> 0000:00:03.3: BAR 0 [io 0x7120-0x7127] [ 0.652262] pci 0000:00:03.3: BAR 1
> [mem 0xd8825000-0xd8825fff] [ 0.652423] pci 0000:00:19.0: [8086:10f5] type
> 00 class 0x020000 conventional PCI endpoint [ 0.652444] pci 0000:00:19.0:
> BAR 0 [mem 0xd8800000-0xd881ffff] [ 0.652455] pci 0000:00:19.0: BAR 1 [mem
> 0xd8824000-0xd8824fff] [ 0.652466] pci 0000:00:19.0: BAR 2 [io
> 0x70e0-0x70ff] [ 0.652556] pci 0000:00:19.0: PME# supported from D0 D3hot
> D3cold [ 0.652670] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
> conventional PCI endpoint [ 0.652725] pci 0000:00:1a.0: BAR 4 [io
> 0x70c0-0x70df] [ 0.652905] pci 0000:00:1a.1: [8086:2938] type 00 class
> 0x0c0300 conventional PCI endpoint [ 0.652960] pci 0000:00:1a.1: BAR 4 [io
> 0x70a0-0x70bf] [ 0.653132] pci 0000:00:1a.2: [8086:2939] type 00 class
> 0x0c0300 conventional PCI endpoint [ 0.653187] pci 0000:00:1a.2: BAR 4 [io
> 0x7080-0x709f] [ 0.653362] pci 0000:00:1a.7: [8086:293c] type 00 class
> 0x0c0320 conventional PCI endpoint [ 0.653382] pci 0000:00:1a.7: BAR 0 [mem
> 0xd8826c00-0xd8826fff] [ 0.653491] pci 0000:00:1a.7: PME# supported from D0
> D3hot D3cold [ 0.653623] pci 0000:00:1b.0: [8086:293e] type 00 class
> 0x040300 PCIe Root Complex Integrated Endpoint [ 0.653649] pci 0000:00:1b.0:
> BAR 0 [mem 0xd8820000-0xd8823fff 64bit] [ 0.653767] pci 0000:00:1b.0: PME#
> supported from D0 D3hot D3cold [ 0.653918] pci 0000:00:1c.0: [8086:2940]
> type 01 class 0x060400 PCIe Root Port [ 0.653957] pci 0000:00:1c.0: PCI
> bridge to [bus 01] [ 0.653966] pci 0000:00:1c.0: bridge window [mem
> 0xd8700000-0xd87fffff] [ 0.654070] pci 0000:00:1c.0: PME# supported from D0
> D3hot D3cold [ 0.654222] pci 0000:00:1c.1: [8086:2942] type 01 class
> 0x060400 PCIe Root Port [ 0.654261] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.654270] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff] [
> 0.654373] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.654527]
> pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 PCIe Root Port [
> 0.654566] pci 0000:00:1c.2: PCI bridge to [bus 03-43] [ 0.654572] pci
> 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.654577] pci 0000:00:1c.2:
> bridge window [mem 0xd4600000-0xd85fffff] [ 0.654684] pci 0000:00:1c.2: PME#
> supported from D0 D3hot D3cold [ 0.654852] pci 0000:00:1c.4: [8086:2948]
> type 01 class 0x060400 PCIe Root Port [ 0.654891] pci 0000:00:1c.4: PCI
> bridge to [bus 44-84] [ 0.654898] pci 0000:00:1c.4: bridge window [io
> 0x3000-0x4fff] [ 0.654903] pci 0000:00:1c.4: bridge window [mem
> 0xd0600000-0xd45fffff] [ 0.655005] pci 0000:00:1c.4: PME# supported from D0
> D3hot D3cold [ 0.655181] pci 0000:00:1d.0: [8086:2934] type 00 class
> 0x0c0300 conventional PCI endpoint [ 0.655236] pci 0000:00:1d.0: BAR 4 [io
> 0x7060-0x707f] [ 0.655397] pci 0000:00:1d.1: [8086:2935] type 00 class
> 0x0c0300 conventional PCI endpoint [ 0.655452] pci 0000:00:1d.1: BAR 4 [io
> 0x7040-0x705f] [ 0.655612] pci 0000:00:1d.2: [8086:2936] type 00 class
> 0x0c0300 conventional PCI endpoint [ 0.655668] pci 0000:00:1d.2: BAR 4 [io
> 0x7020-0x703f] [ 0.655843] pci 0000:00:1d.7: [8086:293a] type 00 class
> 0x0c0320 conventional PCI endpoint [ 0.655864] pci 0000:00:1d.7: BAR 0 [mem
> 0xd8826800-0xd8826bff] [ 0.655972] pci 0000:00:1d.7: PME# supported from D0
> D3hot D3cold [ 0.656095] pci 0000:00:1e.0: [8086:2448] type 01 class
> 0x060401 conventional PCI bridge [ 0.656133] pci 0000:00:1e.0: PCI bridge to
> [bus 85-86] (subtractive decode) [ 0.656139] pci 0000:00:1e.0: bridge window
> [io 0x2000-0x2fff] [ 0.656144] pci 0000:00:1e.0: bridge window [mem
> 0xd0500000-0xd05fffff] [ 0.656319] pci 0000:00:1f.0: [8086:2917] type 00
> class 0x060100 conventional PCI endpoint [ 0.656630] pci 0000:00:1f.2:
> [8086:2929] type 00 class 0x010601 conventional PCI endpoint [ 0.656650] pci
> 0000:00:1f.2: BAR 0 [io 0x7118-0x711f] [ 0.656662] pci 0000:00:1f.2: BAR 1
> [io 0x7144-0x7147] [ 0.656673] pci 0000:00:1f.2: BAR 2 [io 0x7110-0x7117] [
> 0.656684] pci 0000:00:1f.2: BAR 3 [io 0x7140-0x7143] [ 0.656695] pci
> 0000:00:1f.2: BAR 4 [io 0x7000-0x701f] [ 0.656705] pci 0000:00:1f.2: BAR 5
> [mem 0xd8826000-0xd88267ff] [ 0.656775] pci 0000:00:1f.2: PME# supported
> from D3hot [ 0.656936] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.657092]
> pci 0000:02:00.0: [8086:4236] type 00 class 0x028000 PCIe Endpoint [
> 0.657160] pci 0000:02:00.0: BAR 0 [mem 0xd8600000-0xd8601fff 64bit] [
> 0.657441] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.657801]
> pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.657934] pci 0000:00:1c.2: PCI
> bridge to [bus 03-43] [ 0.658068] pci 0000:00:1c.4: PCI bridge to [bus
> 44-84] [ 0.658106] pci_bus 0000:85: extended config space not accessible [
> 0.658169] pci 0000:85:09.0: proprietary Ricoh MMC controller disabled (via
> FireWire function) [ 0.658172] pci 0000:85:09.0: MMC cards are now supported
> by standard SDHCI controller [ 0.658174] pci 0000:85:09.0: [1180:0832] type
> 00 class 0x0c0010 conventional PCI endpoint [ 0.658200] pci 0000:85:09.0:
> BAR 0 [mem 0xd0501000-0xd05017ff] [ 0.658326] pci 0000:85:09.0: supports D1
> D2 [ 0.658328] pci 0000:85:09.0: PME# supported from D0 D1 D2 D3hot D3cold [
> 0.658408] pci 0000:85:09.1: [1180:0822] type 00 class 0x080500 conventional
> PCI endpoint [ 0.658435] pci 0000:85:09.1: BAR 0 [mem 0xd0501900-0xd05019ff]
> [ 0.658560] pci 0000:85:09.1: supports D1 D2 [ 0.658562] pci 0000:85:09.1:
> PME# supported from D0 D1 D2 D3hot D3cold [ 0.658641] pci 0000:85:09.2:
> [1180:0476] type 02 class 0x060700 CardBus bridge [ 0.658667] pci
> 0000:85:09.2: BAR 1 [mem 0xd0500000-0xd0500fff] [ 0.658721] pci
> 0000:85:09.2: supports D1 D2 [ 0.658723] pci 0000:85:09.2: PME# supported
> from D0 D1 D2 D3hot D3cold [ 0.658841] pci 0000:00:1e.0: PCI bridge to [bus
> 85-86] (subtractive decode) [ 0.658855] pci 0000:00:1e.0: bridge window [io
> 0x0000-0x0cf7 window] (subtractive decode) [ 0.658859] pci 0000:00:1e.0:
> bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.658867] pci
> 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive
> decode) [ 0.658869] pci 0000:00:1e.0: bridge window [mem
> 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.658872] pci
> 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff window] (subtractive
> decode) [ 0.658874] pci 0000:00:1e.0: bridge window [mem
> 0xfee01000-0xffffffff window] (subtractive decode) [ 0.658912] pci_bus
> 0000:86: extended config space not accessible [ 0.658937] pci_bus 0000:86:
> busn_res: [bus 86] end can not be updated to 89 [ 0.658946] pci
> 0000:00:1e.0: bridge has subordinate 86 but max busn 89 [ 0.659547] ACPI:
> PCI: Interrupt link LNKA configured for IRQ 10 [ 0.659602] ACPI: PCI:
> Interrupt link LNKB configured for IRQ 10 [ 0.659654] ACPI: PCI: Interrupt
> link LNKC configured for IRQ 11 [ 0.659706] ACPI: PCI: Interrupt link LNKD
> configured for IRQ 10 [ 0.659758] ACPI: PCI: Interrupt link LNKE configured
> for IRQ 10 [ 0.659810] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
> [ 0.659861] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 [ 0.659913]
> ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.659915] ACPI: PCI:
> Interrupt link LNKH disabled [ 0.661201] ACPI: EC: interrupt unblocked [
> 0.661204] ACPI: EC: event unblocked [ 0.661207] ACPI: EC: EC_CMD/EC_SC=0x66,
> EC_DATA=0x62 [ 0.661209] ACPI: EC: GPE=0x16 [ 0.661211] ACPI:
> \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.661214] ACPI:
> \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.661305]
> iommu: Default domain type: Translated [ 0.661305] iommu: DMA domain TLB
> invalidation policy: lazy mode [ 0.661305] pps_core: LinuxPPS API ver. 1
> registered [ 0.661305] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti@linux.it> [ 0.661305] PTP clock support
> registered [ 0.661305] EDAC MC: Ver: 3.0.0 [ 0.661305] NetLabel:
> Initializing [ 0.661305] NetLabel: domain hash size = 128 [ 0.661305]
> NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.661305] NetLabel:
> unlabeled traffic allowed by default [ 0.661305] PCI: Using ACPI for IRQ
> routing [ 0.670144] PCI: pci_cache_line_size set to 64 bytes [ 0.670274]
> e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.670277] e820:
> reserve RAM buffer [mem 0xb4f2f000-0xb7ffffff] [ 0.670279] e820: reserve RAM
> buffer [mem 0xb5d70000-0xb7ffffff] [ 0.670280] e820: reserve RAM buffer [mem
> 0xb84b9000-0xbbffffff] [ 0.670283] e820: reserve RAM buffer [mem
> 0xb9e93000-0xbbffffff] [ 0.670284] e820: reserve RAM buffer [mem
> 0xb9ebf000-0xbbffffff] [ 0.670286] e820: reserve RAM buffer [mem
> 0xba000000-0xbbffffff] [ 0.670672] pci 0000:00:02.0: vgaarb: setting as boot
> VGA device [ 0.670672] pci 0000:00:02.0: vgaarb: bridge control possible [
> 0.670672] pci 0000:00:02.0: vgaarb: VGA device added:
> decodes=io+mem,owns=io+mem,locks=none [ 0.670672] vgaarb: loaded [ 0.670699]
> hpet: 4 channels of 0 reserved for per-cpu timers [ 0.670703] hpet0: at MMIO
> 0xfed00000, IRQs 2, 8, 0, 0 [ 0.670710] hpet0: 4 comparators, 64-bit
> 14.318180 MHz counter [ 0.671665] clocksource: Switched to clocksource
> tsc-early [ 0.673260] VFS: Disk quotas dquot_6.6.0 [ 0.673301] VFS:
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.673536]
> AppArmor: AppArmor Filesystem Enabled [ 0.673571] pnp: PnP ACPI init [
> 0.673787] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [
> 0.673792] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [
> 0.673795] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [
> 0.673799] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [
> 0.673802] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [
> 0.673805] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [
> 0.673808] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [
> 0.673810] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [
> 0.673810] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [
> 0.673810] system 00:03: [io 0x0200-0x027f] has been reserved [ 0.673810]
> system 00:03: [io 0x1000-0x1003] has been reserved [ 0.673810] system 00:03:
> [io 0x1010-0x101f] has been reserved [ 0.673810] system 00:03: [io 0xffff]
> has been reserved [ 0.673810] system 00:03: [io 0x0400-0x047f] has been
> reserved [ 0.673810] system 00:03: [io 0x0500-0x057f] has been reserved [
> 0.673810] system 00:03: [io 0xef80-0xef9f] has been reserved [ 0.673879] pnp
> 00:05: [dma 0 disabled] [ 0.674175] pnp: PnP ACPI: found 8 devices [
> 0.681356] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
> max_idle_ns: 2085701024 ns [ 0.681584] NET: Registered PF_INET protocol
> family [ 0.681807] IP idents hash table entries: 65536 (order: 7, 524288
> bytes, linear) [ 0.699630] tcp_listen_portaddr_hash hash table entries: 2048
> (order: 3, 32768 bytes, linear) [ 0.699708] Table-perturb hash table
> entries: 65536 (order: 6, 262144 bytes, linear) [ 0.699774] TCP established
> hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.700068] TCP
> bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.700228]
> TCP: Hash tables configured (established 32768 bind 32768) [ 0.700424] MPTCP
> token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.700500]
> UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.700532]
> UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [
> 0.700629] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.700640] NET:
> Registered PF_XDP protocol family [ 0.700658] pci 0000:00:1c.0: bridge
> window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.700664] pci
> 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
> 01] add_size 200000 add_align 100000 [ 0.700669] pci 0000:00:1c.1: bridge
> window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.700672] pci
> 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
> 02] add_size 200000 add_align 100000 [ 0.700676] pci 0000:00:1c.2: bridge
> window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
> add_align 100000 [ 0.700680] pci 0000:00:1c.4: bridge window [mem
> 0x00100000-0x000fffff 64bit pref] to [bus 44-84] add_size 200000 add_align
> 100000 [ 0.700712] pci 0000:00:1c.0: bridge window [mem
> 0xd8900000-0xd8afffff 64bit pref]: assigned [ 0.700717] pci 0000:00:1c.1:
> bridge window [mem 0xd8b00000-0xd8cfffff 64bit pref]: assigned [ 0.700721]
> pci 0000:00:1c.2: bridge window [mem 0xd8d00000-0xd8efffff 64bit pref]:
> assigned [ 0.700724] pci 0000:00:1c.4: bridge window [mem
> 0xd8f00000-0xd90fffff 64bit pref]: assigned [ 0.700729] pci 0000:00:1c.0:
> bridge window [io 0x8000-0x8fff]: assigned [ 0.700733] pci 0000:00:1c.1:
> bridge window [io 0x9000-0x9fff]: assigned [ 0.700738] pci 0000:00:1c.0: PCI
> bridge to [bus 01] [ 0.700742] pci 0000:00:1c.0: bridge window [io
> 0x8000-0x8fff] [ 0.700748] pci 0000:00:1c.0: bridge window [mem
> 0xd8700000-0xd87fffff] [ 0.700753] pci 0000:00:1c.0: bridge window [mem
> 0xd8900000-0xd8afffff 64bit pref] [ 0.700761] pci 0000:00:1c.1: PCI bridge
> to [bus 02] [ 0.700764] pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff] [
> 0.700770] pci 0000:00:1c.1: bridge window [mem 0xd8600000-0xd86fffff] [
> 0.700775] pci 0000:00:1c.1: bridge window [mem 0xd8b00000-0xd8cfffff 64bit
> pref] [ 0.700782] pci 0000:00:1c.2: PCI bridge to [bus 03-43] [ 0.700786]
> pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.700819] pci
> 0000:00:1c.2: bridge window [mem 0xd4600000-0xd85fffff] [ 0.700824] pci
> 0000:00:1c.2: bridge window [mem 0xd8d00000-0xd8efffff 64bit pref] [
> 0.700831] pci 0000:00:1c.4: PCI bridge to [bus 44-84] [ 0.700835] pci
> 0000:00:1c.4: bridge window [io 0x3000-0x4fff] [ 0.700841] pci 0000:00:1c.4:
> bridge window [mem 0xd0600000-0xd45fffff] [ 0.700845] pci 0000:00:1c.4:
> bridge window [mem 0xd8f00000-0xd90fffff 64bit pref] [ 0.700876] pci
> 0000:85:09.2: CardBus bridge window 1 [mem 0xdc000000-0xdfffffff pref]:
> assigned [ 0.700880] pci 0000:85:09.2: unknown [mem 0xf0000000-0xf3ffffff]:
> assigned [ 0.700883] pci 0000:85:09.2: CardBus bridge window 1 [io
> 0x2000-0x20ff]: assigned [ 0.700885] pci 0000:85:09.2: CardBus bridge window
> 0 [io 0x2400-0x24ff]: assigned [ 0.700889] pci 0000:85:09.2: CardBus bridge
> to [bus 86] [ 0.700891] pci 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 0.700897] pci 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 0.700903] pci
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 0.700909] pci
> 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.700915] pci
> 0000:00:1e.0: PCI bridge to [bus 85-86] [ 0.700919] pci 0000:00:1e.0: bridge
> window [io 0x2000-0x2fff] [ 0.700925] pci 0000:00:1e.0: bridge window [mem
> 0xd0500000-0xd05fffff] [ 0.700938] pci_bus 0000:00: resource 4 [io
> 0x0000-0x0cf7 window] [ 0.700941] pci_bus 0000:00: resource 5 [io
> 0x0d00-0xffff window] [ 0.700943] pci_bus 0000:00: resource 6 [mem
> 0x000a0000-0x000bffff window] [ 0.700946] pci_bus 0000:00: resource 7 [mem
> 0xc0000000-0xdfffffff window] [ 0.700948] pci_bus 0000:00: resource 8 [mem
> 0xf0000000-0xfedfffff window] [ 0.700950] pci_bus 0000:00: resource 9 [mem
> 0xfee01000-0xffffffff window] [ 0.700953] pci_bus 0000:01: resource 0 [io
> 0x8000-0x8fff] [ 0.700956] pci_bus 0000:01: resource 1 [mem
> 0xd8700000-0xd87fffff] [ 0.700958] pci_bus 0000:01: resource 2 [mem
> 0xd8900000-0xd8afffff 64bit pref] [ 0.700961] pci_bus 0000:02: resource 0
> [io 0x9000-0x9fff] [ 0.700963] pci_bus 0000:02: resource 1 [mem
> 0xd8600000-0xd86fffff] [ 0.700965] pci_bus 0000:02: resource 2 [mem
> 0xd8b00000-0xd8cfffff 64bit pref] [ 0.700968] pci_bus 0000:03: resource 0
> [io 0x5000-0x6fff] [ 0.700970] pci_bus 0000:03: resource 1 [mem
> 0xd4600000-0xd85fffff] [ 0.700973] pci_bus 0000:03: resource 2 [mem
> 0xd8d00000-0xd8efffff 64bit pref] [ 0.700975] pci_bus 0000:44: resource 0
> [io 0x3000-0x4fff] [ 0.700977] pci_bus 0000:44: resource 1 [mem
> 0xd0600000-0xd45fffff] [ 0.700979] pci_bus 0000:44: resource 2 [mem
> 0xd8f00000-0xd90fffff 64bit pref] [ 0.700982] pci_bus 0000:85: resource 0
> [io 0x2000-0x2fff] [ 0.700984] pci_bus 0000:85: resource 1 [mem
> 0xd0500000-0xd05fffff] [ 0.700986] pci_bus 0000:85: resource 4 [io
> 0x0000-0x0cf7 window] [ 0.700988] pci_bus 0000:85: resource 5 [io
> 0x0d00-0xffff window] [ 0.700990] pci_bus 0000:85: resource 6 [mem
> 0x000a0000-0x000bffff window] [ 0.700992] pci_bus 0000:85: resource 7 [mem
> 0xc0000000-0xdfffffff window] [ 0.700995] pci_bus 0000:85: resource 8 [mem
> 0xf0000000-0xfedfffff window] [ 0.700997] pci_bus 0000:85: resource 9 [mem
> 0xfee01000-0xffffffff window] [ 0.700999] pci_bus 0000:86: resource 0 [io
> 0x2000-0x20ff] [ 0.701001] pci_bus 0000:86: resource 1 [io 0x2400-0x24ff] [
> 0.701003] pci_bus 0000:86: resource 2 [mem 0xdc000000-0xdfffffff pref] [
> 0.701006] pci_bus 0000:86: resource 3 [mem 0xf0000000-0xf3ffffff] [
> 0.703165] PCI: CLS 64 bytes, default 64 [ 0.703185] PCI-DMA: Using software
> bounce buffering for IO (SWIOTLB) [ 0.703187] software IO TLB: mapped [mem
> 0x00000000b0f2f000-0x00000000b4f2f000] (64MB) [ 0.703303] Trying to unpack
> rootfs image as initramfs... [ 0.705477] Initialise system trusted keyrings
> [ 0.705507] Key type blacklist registered [ 0.705656] workingset:
> timestamp_bits=36 max_order=20 bucket_order=0 [ 0.705672] zbud: loaded [
> 0.706136] fuse: init (API version 7.41) [ 0.706454] integrity: Platform
> Keyring initialized [ 0.706467] integrity: Machine keyring initialized [
> 0.736532] Key type asymmetric registered [ 0.736541] Asymmetric key parser
> 'x509' registered [ 1.073534] Freeing initrd memory: 70432K [ 1.081539]
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [
> 1.081610] io scheduler mq-deadline registered [ 1.084450] ledtrig-cpu:
> registered to indicate activity on CPUs [ 1.084857] pcieport 0000:00:1c.0:
> PME: Signaling with IRQ 24 [ 1.084902] pcieport 0000:00:1c.0: pciehp: Slot
> #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock-
> NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 1.085304] pcieport
> 0000:00:1c.1: PME: Signaling with IRQ 25 [ 1.085343] pcieport 0000:00:1c.1:
> pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [
> 1.085737] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26 [ 1.085778]
> pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd-
> PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with
> Cmd Compl erratum) [ 1.086127] pcieport 0000:00:1c.4: PME: Signaling with
> IRQ 27 [ 1.086168] pcieport 0000:00:1c.4: pciehp: Slot #4 AttnBtn- PwrCtrl-
> MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis-
> LLActRep+ (with Cmd Compl erratum) [ 1.086391] shpchp: Standard Hot Plug PCI
> Controller Driver version: 0.4 [ 1.086499] Monitor-Mwait will be used to
> enter C-1 state [ 1.086508] Monitor-Mwait will be used to enter C-2 state [
> 1.086784] tsc: Marking TSC unstable due to TSC halts in idle [ 1.087000]
> clocksource: Switched to clocksource hpet [ 1.091168] thermal LNXTHERM:00:
> registered as thermal_zone0 [ 1.091172] ACPI: thermal: Thermal Zone [DTSZ]
> (19 C) [ 1.106315] thermal LNXTHERM:01: registered as thermal_zone1 [
> 1.106321] ACPI: thermal: Thermal Zone [BATZ] (25 C) [ 1.109542] thermal
> LNXTHERM:02: registered as thermal_zone2 [ 1.109546] ACPI: thermal: Thermal
> Zone [CPUZ] (26 C) [ 1.112757] thermal LNXTHERM:03: registered as
> thermal_zone3 [ 1.112760] ACPI: thermal: Thermal Zone [LOCZ] (16 C) [
> 1.116010] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.116013] ACPI:
> thermal: Thermal Zone [SKNZ] (16 C) [ 1.116282] Serial: 8250/16550 driver, 4
> ports, IRQ sharing enabled [ 1.117568] 0000:00:03.3: ttyS0 at I/O 0x7120
> (irq = 17, base_baud = 115200) is a 16550A [ 1.117972] Linux agpgart
> interface v0.103 [ 1.121506] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id
> 16) [ 1.126488] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A
> 750->750000us B 2000->2000000us C 750->750000us D 750->750000us [ 1.135476]
> tpm tpm0: Operation Timed out [ 1.141777] tpm tpm0: Adjusting TPM timeout
> parameters. [ 2.012248] i8042: PNP: PS/2 Controller
> [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.013806] i8042:
> Detected active multiplexing controller, rev 1.1 [ 2.014519] serio: i8042
> KBD port at 0x60,0x64 irq 1 [ 2.014527] serio: i8042 AUX0 port at 0x60,0x64
> irq 12 [ 2.014594] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.014598]
> serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.014600] serio: i8042 AUX3
> port at 0x60,0x64 irq 12 [ 2.014744] mousedev: PS/2 mouse device common for
> all mice [ 2.014780] rtc_cmos 00:04: RTC can wake from S4 [ 2.015182]
> rtc_cmos 00:04: registered as rtc0 [ 2.015222] rtc_cmos 00:04: setting
> system clock to 2025-06-14T23:03:23 UTC (1749942203) [ 2.015270] rtc_cmos
> 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.015285]
> intel_pstate: CPU model not supported [ 2.015769] NET: Registered PF_INET6
> protocol family [ 2.016706] random: crng init done [ 2.023470] Segment
> Routing with IPv6 [ 2.023499] In-situ OAM (IOAM) with IPv6 [ 2.023536] mip6:
> Mobile IPv6 [ 2.023545] NET: Registered PF_PACKET protocol family [
> 2.023614] mpls_gso: MPLS GSO support [ 2.023844] microcode: Current
> revision: 0x00000a0b [ 2.023847] microcode: Updated early from: 0x00000a07 [
> 2.023937] IPI shorthand broadcast: enabled [ 2.027135] registered taskstats
> version 1 [ 2.027268] Loading compiled-in X.509 certificates [ 2.040619]
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input2 [ 2.063579] Loaded X.509 cert
> 'Build time autogenerated kernel key:
> 9d293d8af98f23c96fa00be8164c417c049a1a83' [ 2.066513] Demotion targets for
> Node 0: null [ 2.066617] Key type .fscrypt registered [ 2.066619] Key type
> fscrypt-provisioning registered [ 2.097790] Key type encrypted registered [
> 2.097799] AppArmor: AppArmor sha256 policy hashing enabled [ 2.097818] ima:
> Allocated hash algorithm: sha256 [ 2.144286] ima: No architecture policies
> found [ 2.144315] evm: Initialising EVM extended attributes: [ 2.144317]
> evm: security.selinux [ 2.144319] evm: security.SMACK64 (disabled) [
> 2.144322] evm: security.SMACK64EXEC (disabled) [ 2.144324] evm:
> security.SMACK64TRANSMUTE (disabled) [ 2.144326] evm: security.SMACK64MMAP
> (disabled) [ 2.144328] evm: security.apparmor [ 2.144330] evm: security.ima
> [ 2.144331] evm: security.capability [ 2.144333] evm: HMAC attrs: 0x1 [
> 2.147725] RAS: Correctable Errors collector initialized. [ 2.172787]
> Unstable clock detected, switching default tracing clock to "global" If you
> want to keep using the local clock, then add: "trace_clock=local" on the
> kernel command line [ 2.172849] clk: Disabling unused clocks [ 2.172852] PM:
> genpd: Disabling unused power domains [ 2.183824] Freeing unused decrypted
> memory: 2028K [ 2.186217] Freeing unused kernel image (initmem) memory:
> 4148K [ 2.186386] Write protecting the kernel read-only data: 28672k [
> 2.194385] Freeing unused kernel image (rodata/data gap) memory: 508K [
> 2.252855] x86/mm: Checked W+X mappings: passed, no W+X pages found. [
> 2.254132] x86/mm: Checking user space page tables [ 2.310521] x86/mm:
> Checked W+X mappings: passed, no W+X pages found. [ 2.310535] Run /init as
> init process [ 2.310537] with arguments: [ 2.310539] /init [ 2.310541] with
> environment: [ 2.310542] HOME=/ [ 2.310543] TERM=linux [ 2.310545]
> BOOT_IMAGE=/boot/vmlinuz-6.12.30-amd64 [ 2.523847] input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7 [ 2.523899] ACPI:
> button: Sleep Button [SLPB] [ 2.523978] input: Lid Switch as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8 [ 2.524011] ACPI:
> button: Lid Switch [LID] [ 2.524066] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 [ 2.529575] wmi_bus
> wmi_bus-PNP0C14:00: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A
> has zero instances [ 2.529583] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]:
> 8F1F6435-9F42-42C8-BADC-0E9424F20C9A has zero instances [ 2.540897] ACPI:
> button: Power Button [PWRF] [ 2.554390] ACPI: battery: Slot [BAT1] (battery
> absent) [ 2.607988] ACPI: battery: Slot [BAT0] (battery present) [ 2.636250]
> ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts
> with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO)
> (20240827/utaddress-204) [ 2.636263] ACPI: OSL: Resource conflict; ACPI
> support missing from driver? [ 2.636267] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x000000000000053B (\GPIO) (20240827/utaddress-204) [
> 2.636272] ACPI: OSL: Resource conflict; ACPI support missing from driver? [
> 2.636273] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F
> conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO)
> (20240827/utaddress-204) [ 2.636278] ACPI: OSL: Resource conflict; ACPI
> support missing from driver? [ 2.636279] lpc_ich: Resource conflict(s) found
> affecting gpio_ich [ 2.810111] iTCO_vendor_support: vendor-support=0 [
> 2.818113] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9M-E TCO device (Version=2,
> TCOBASE=0x0460) [ 2.818361] iTCO_wdt iTCO_wdt.1.auto: initialized.
> heartbeat=30 sec (nowayout=0) [ 2.820026] ACPI: bus type drm_connector
> registered [ 2.826733] SCSI subsystem initialized [ 2.832215] sdhci: Secure
> Digital Host Controller Interface driver [ 2.832222] sdhci: Copyright(c)
> Pierre Ossman [ 2.835094] ACPI: bus type USB registered [ 2.835150] usbcore:
> registered new interface driver usbfs [ 2.835165] usbcore: registered new
> interface driver hub [ 2.835590] e1000e: Intel(R) PRO/1000 Network Driver [
> 2.835593] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.835913]
> e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic
> conservative mode [ 2.836386] usbcore: registered new device driver usb [
> 2.884616] sdhci-pci 0000:85:09.1: SDHCI controller found [1180:0822] (rev
> 25) [ 2.884825] sdhci-pci 0000:85:09.1: Will use DMA mode even though HW
> doesn't fully claim to support it. [ 2.884903] mmc0 bounce up to 128
> segments into one, max segment size 65536 bytes [ 2.884994] sdhci-pci
> 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim to
> support it. [ 2.887253] ehci-pci 0000:00:1a.7: EHCI Host Controller [
> 2.887264] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number
> 1 [ 2.887279] ehci-pci 0000:00:1a.7: debug port 1 [ 2.891224] ehci-pci
> 0000:00:1a.7: irq 19, io mem 0xd8826c00 [ 2.898893] firewire_ohci
> 0000:85:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts,
> quirks 0x11 [ 2.902593] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [
> 2.902697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
> bcdDevice= 6.12 [ 2.902702] usb usb1: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1 [ 2.902704] usb usb1: Product: EHCI Host
> Controller [ 2.902706] usb usb1: Manufacturer: Linux 6.12.30-amd64 ehci_hcd
> [ 2.902708] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.902955] hub 1-0:1.0:
> USB hub found [ 2.902970] hub 1-0:1.0: 6 ports detected [ 2.903584] ehci-pci
> 0000:00:1d.7: EHCI Host Controller [ 2.903593] ehci-pci 0000:00:1d.7: new
> USB bus registered, assigned bus number 2 [ 2.903608] ehci-pci 0000:00:1d.7:
> debug port 1 [ 2.907577] ehci-pci 0000:00:1d.7: irq 20, io mem 0xd8826800 [
> 2.918216] libata version 3.00 loaded. [ 2.918578] ehci-pci 0000:00:1d.7: USB
> 2.0 started, EHCI 1.00 [ 2.918667] usb usb2: New USB device found,
> idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.918671] usb usb2: New USB
> device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.918674] usb usb2:
> Product: EHCI Host Controller [ 2.918676] usb usb2: Manufacturer: Linux
> 6.12.30-amd64 ehci_hcd [ 2.918678] usb usb2: SerialNumber: 0000:00:1d.7 [
> 2.918889] hub 2-0:1.0: USB hub found [ 2.918902] hub 2-0:1.0: 6 ports
> detected [ 2.922808] mmc0: SDHCI controller on PCI [0000:85:09.1] using DMA
> [ 2.922828] sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't
> fully claim to support it. [ 2.946126] ahci 0000:00:1f.2: version 3.0 [
> 2.946454] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [
> 2.946491] ahci 0000:00:1f.2: AHCI vers 0001.0200, 32 command slots, 3 Gbps,
> SATA mode [ 2.946496] ahci 0000:00:1f.2: 3/4 ports implemented (port mask
> 0x23) [ 2.946499] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
> pio slum part ccc ems sxs [ 2.948680] uhci_hcd 0000:00:1a.0: UHCI Host
> Controller [ 2.948692] uhci_hcd 0000:00:1a.0: new USB bus registered,
> assigned bus number 3 [ 2.948702] uhci_hcd 0000:00:1a.0: detected 2 ports [
> 2.948741] uhci_hcd 0000:00:1a.0: irq 16, io port 0x000070c0 [ 2.948836] usb
> usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [
> 2.948841] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.948843] usb usb3: Product: UHCI Host Controller [ 2.948846] usb usb3:
> Manufacturer: Linux 6.12.30-amd64 uhci_hcd [ 2.948848] usb usb3:
> SerialNumber: 0000:00:1a.0 [ 2.949126] hub 3-0:1.0: USB hub found [
> 2.949139] hub 3-0:1.0: 2 ports detected [ 2.949827] uhci_hcd 0000:00:1a.1:
> UHCI Host Controller [ 2.949834] uhci_hcd 0000:00:1a.1: new USB bus
> registered, assigned bus number 4 [ 2.949852] uhci_hcd 0000:00:1a.1:
> detected 2 ports [ 2.949882] uhci_hcd 0000:00:1a.1: irq 17, io port
> 0x000070a0 [ 2.950018] usb usb4: New USB device found, idVendor=1d6b,
> idProduct=0001, bcdDevice= 6.12 [ 2.950022] usb usb4: New USB device
> strings: Mfr=3, Product=2, SerialNumber=1 [ 2.950025] usb usb4: Product:
> UHCI Host Controller [ 2.950027] usb usb4: Manufacturer: Linux 6.12.30-amd64
> uhci_hcd [ 2.950029] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.950306] hub
> 4-0:1.0: USB hub found [ 2.950318] hub 4-0:1.0: 2 ports detected [ 2.950927]
> uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.950935] uhci_hcd
> 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.950944]
> uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.950976] uhci_hcd 0000:00:1a.2:
> irq 18, io port 0x00007080 [ 2.951112] usb usb5: New USB device found,
> idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.951116] usb usb5: New USB
> device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.951119] usb usb5:
> Product: UHCI Host Controller [ 2.951121] usb usb5: Manufacturer: Linux
> 6.12.30-amd64 uhci_hcd [ 2.951123] usb usb5: SerialNumber: 0000:00:1a.2 [
> 2.951409] hub 5-0:1.0: USB hub found [ 2.951427] hub 5-0:1.0: 2 ports
> detected [ 2.951858] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.951865]
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [
> 2.951872] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.951894] uhci_hcd
> 0000:00:1d.0: irq 20, io port 0x00007060 [ 2.952132] usb usb6: New USB
> device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.952136] usb
> usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.952139]
> usb usb6: Product: UHCI Host Controller [ 2.952141] usb usb6: Manufacturer:
> Linux 6.12.30-amd64 uhci_hcd [ 2.952143] usb usb6: SerialNumber:
> 0000:00:1d.0 [ 2.952423] hub 6-0:1.0: USB hub found [ 2.952435] hub 6-0:1.0:
> 2 ports detected [ 2.952751] uhci_hcd 0000:00:1d.1: UHCI Host Controller [
> 2.952758] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number
> 7 [ 2.952766] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.952787] uhci_hcd
> 0000:00:1d.1: irq 22, io port 0x00007040 [ 2.953063] usb usb7: New USB
> device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.953067] usb
> usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.953070]
> usb usb7: Product: UHCI Host Controller [ 2.953072] usb usb7: Manufacturer:
> Linux 6.12.30-amd64 uhci_hcd [ 2.953074] usb usb7: SerialNumber:
> 0000:00:1d.1 [ 2.953359] hub 7-0:1.0: USB hub found [ 2.953377] hub 7-0:1.0:
> 2 ports detected [ 2.953738] uhci_hcd 0000:00:1d.2: UHCI Host Controller [
> 2.953747] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number
> 8 [ 2.953755] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.953775] uhci_hcd
> 0000:00:1d.2: irq 18, io port 0x00007020 [ 2.954054] usb usb8: New USB
> device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.954058] usb
> usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.954061]
> usb usb8: Product: UHCI Host Controller [ 2.954063] usb usb8: Manufacturer:
> Linux 6.12.30-amd64 uhci_hcd [ 2.954065] usb usb8: SerialNumber:
> 0000:00:1d.2 [ 2.954340] hub 8-0:1.0: USB hub found [ 2.954352] hub 8-0:1.0:
> 2 ports detected [ 2.970635] scsi host0: ahci [ 2.970914] scsi host1: ahci [
> 2.971098] scsi host2: ahci [ 2.972004] scsi host3: ahci [ 2.972986] scsi
> host4: ahci [ 2.973167] scsi host5: ahci [ 2.973248] ata1: SATA max UDMA/133
> abar m2048@0xd8826000 port 0xd8826100 irq 29 lpm-pol 3 [ 2.973252] ata2:
> SATA max UDMA/133 abar m2048@0xd8826000 port 0xd8826180 irq 29 lpm-pol 3 [
> 2.973255] ata3: DUMMY [ 2.973256] ata4: DUMMY [ 2.973258] ata5: DUMMY [
> 2.973260] ata6: SATA max UDMA/133 abar m2048@0xd8826000 port 0xd8826380 irq
> 29 lpm-pol 0 [ 3.041013] e1000e 0000:00:19.0 eth0: (PCI
> Express:2.5GT/s:Width x1) d8:d3:85:99:70:a7 [ 3.041023] e1000e 0000:00:19.0
> eth0: Intel(R) PRO/1000 Network Connection [ 3.041055] e1000e 0000:00:19.0
> eth0: MAC: 7, PHY: 8, PBA No: 1052FF-0FF [ 3.278625] ata1: SATA link up 3.0
> Gbps (SStatus 123 SControl 300) [ 3.279512] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 3.279522] ata1.00: ATA-8:
> ST9160412AS, 0006HPM1, max UDMA/100 [ 3.279724] ata1.00: 312581808 sectors,
> multi 16: LBA48 NCQ (depth 32), AA [ 3.280671] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 3.280865] ata1.00:
> configured for UDMA/100 [ 3.291311] scsi 0:0:0:0: Direct-Access ATA
> ST9160412AS HPM1 PQ: 0 ANSI: 5 [ 3.346724] usb 3-1: new full-speed USB
> device number 2 using uhci_hcd [ 3.414937] firewire_core 0000:85:09.0:
> created device fw0: GUID 5566778811223344, S400 [ 3.516267] psmouse serio4:
> synaptics: queried max coordinates: x [..5694], y [..5048] [ 3.524835] usb
> 3-1: New USB device found, idVendor=03f0, idProduct=171d, bcdDevice= 1.00 [
> 3.524841] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.524845] usb 3-1: Product: HP Integrated Module [ 3.524848] usb 3-1:
> Manufacturer: Broadcom Corp [ 3.548771] psmouse serio4: synaptics: Touchpad
> model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000/0x0, board
> id: 0, fw id: 504136 [ 3.548786] psmouse serio4: synaptics: serio: Synaptics
> pass-through port at isa0060/serio4/input0 [ 3.590226] input: SynPS/2
> Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [
> 3.603772] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.623079]
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [
> 3.623088] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100 [ 3.642353]
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [
> 3.642359] ata2.00: configured for UDMA/100 [ 3.657796] scsi 1:0:0:0: CD-ROM
> hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5 [ 4.007492] ata6: SATA link down
> (SStatus 0 SControl 300) [ 4.012941] e1000e 0000:00:19.0 enp0s25: renamed
> from eth0 [ 4.045411] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks:
> (160 GB/149 GiB) [ 4.045432] sd 0:0:0:0: [sda] Write Protect is off [
> 4.045436] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.045457] sd 0:0:0:0:
> [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 4.045493] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [
> 4.146562] sda: sda1 sda2 < sda5 > [ 4.146850] sd 0:0:0:0: [sda] Attached
> SCSI disk [ 4.187627] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
> dvd-ram cd/rw xa/form2 cdda tray [ 4.187639] cdrom: Uniform CD-ROM driver
> Revision: 3.20 [ 4.224871] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.312110]
> usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 5.067656] i915
> 0000:00:02.0: [drm] Found GM45 (device ID 2a42) display version 4.00
> stepping N/A [ 5.068036] pci 0000:00:00.0: Intel GM45 Chipset [ 5.068057]
> pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [
> 5.068483] pci 0000:00:00.0: detected 65536K stolen memory [ 5.068620] i915
> 0000:00:02.0: vgaarb: deactivate vga console [ 5.069195] Console: switching
> to colour dummy device 80x25 [ 5.070433] i915 0000:00:02.0: vgaarb: VGA
> decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.099258]
> i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 5.100172]
> [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 5.100641] ACPI
> BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of
> object (length 0x5) (20240827/exoparg2-393) [ 5.100657] ACPI Error: Aborting
> method \_SB.PCI0.GFX0._DOD due to previous error (AE_AML_PACKAGE_LIMIT)
> (20240827/psparse-529) [ 5.100669] ACPI: \_SB_.PCI0.GFX0: _DOD evaluation
> failed: AE_AML_PACKAGE_LIMIT [ 5.100772] ACPI: video: Video Device [GFX0]
> (multi-head: yes rom: no post: no) [ 5.102092] input: Video Bus as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 [
> 5.115066] acpi device:03: registered as cooling_device2 [ 5.165643] usb 4-1:
> New USB device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03 [
> 5.165649] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 5.165652] usb 4-1: Product: Fingerprint Sensor [ 5.301230] fbcon:
> i915drmfb (fb0) is primary device [ 5.378742] usb 1-5: new high-speed USB
> device number 4 using ehci-pci [ 5.570017] usb 1-5: New USB device found,
> idVendor=04f2, idProduct=b053, bcdDevice=32.18 [ 5.570023] usb 1-5: New USB
> device strings: Mfr=2, Product=1, SerialNumber=3 [ 5.570026] usb 1-5:
> Product: CKA7216 [ 5.570029] usb 1-5: Manufacturer: Chicony Electronics Co.,
> Ltd. [ 5.570031] usb 1-5: SerialNumber: SN0001 [ 5.619657] input: PS/2
> Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input14 [
> 6.422334] Console: switching to colour frame buffer device 160x50 [
> 6.441018] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [
> 7.079906] PM: Image not found (code -22) [ 7.720982] EXT4-fs (sda1): orphan
> cleanup on readonly fs [ 7.721612] EXT4-fs (sda1): mounted filesystem
> 4b1378ff-7e5c-4646-8564-22b0c96fd3f8 ro with ordered data mode. Quota mode:
> none. [ 8.059634] Not activating Mandatory Access Control as
> /sbin/tomoyo-init does not exist. [ 9.317383] systemd[1]: Inserted module
> 'autofs4' [ 9.582677] systemd[1]: systemd 257.6-1 running in system mode
> (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS
> +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD
> +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT
> +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON
> -UTMP +SYSVINIT +LIBARCHIVE) [ 9.582691] systemd[1]: Detected architecture
> x86-64. [ 9.648183] systemd[1]: Hostname set to <blue>. [ 10.005910]
> systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 12.146680]
> systemd[1]: Queued start job for default target graphical.target. [
> 12.208954] systemd[1]: Created slice system-getty.slice - Slice
> /system/getty. [ 12.209606] systemd[1]: Created slice system-modprobe.slice
> - Slice /system/modprobe. [ 12.210041] systemd[1]: Created slice user.slice
> - User and Session Slice. [ 12.210157] systemd[1]: Started
> systemd-ask-password-wall.path - Forward Password Requests to Wall Directory
> Watch. [ 12.210454] systemd[1]: Set up automount
> proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File
> System Automount Point. [ 12.210504] systemd[1]: Expecting device
> dev-disk-by\x2duuid-3f5e2c99\x2d2a46\x2d4d6b\x2d8754\x2d8c41219ad8df.device
> - /dev/disk/by-uuid/3f5e2c99-2a46-4d6b-8754-8c41219ad8df... [ 12.210639]
> systemd[1]: Reached target nss-user-lookup.target - User and Group Name
> Lookups. [ 12.210686] systemd[1]: Reached target remote-fs.target - Remote
> File Systems. [ 12.210724] systemd[1]: Reached target slices.target - Slice
> Units. [ 12.212475] systemd[1]: Listening on systemd-creds.socket -
> Credential Encryption/Decryption. [ 12.212608] systemd[1]: Listening on
> systemd-initctl.socket - initctl Compatibility Named Pipe. [ 12.212766]
> systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket
> (/dev/log). [ 12.212928] systemd[1]: Listening on systemd-journald.socket -
> Journal Sockets. [ 12.212978] systemd[1]: systemd-pcrextend.socket - TPM PCR
> Measurements was skipped because of an unmet condition check
> (ConditionSecurity=measured-uki). [ 12.213013] systemd[1]:
> systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet
> condition check (ConditionSecurity=measured-uki). [ 12.213147] systemd[1]:
> Listening on systemd-udevd-control.socket - udev Control Socket. [
> 12.213251] systemd[1]: Listening on systemd-udevd-kernel.socket - udev
> Kernel Socket. [ 12.236223] systemd[1]: Mounting dev-hugepages.mount - Huge
> Pages File System... [ 12.237642] systemd[1]: Mounting dev-mqueue.mount -
> POSIX Message Queue File System... [ 12.245299] systemd[1]: Mounting
> run-lock.mount - Legacy Locks Directory /run/lock... [ 12.250867]
> systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [
> 12.253225] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File
> System... [ 12.262926] systemd[1]: Starting keyboard-setup.service - Set the
> console keyboard layout... [ 12.267027] systemd[1]: Starting
> kmod-static-nodes.service - Create List of Static Device Nodes... [
> 12.274913] systemd[1]: Starting modprobe@configfs.service - Load Kernel
> Module configfs... [ 12.279413] systemd[1]: Starting modprobe@drm.service -
> Load Kernel Module drm... [ 12.302829] systemd[1]: Starting
> modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 12.306884]
> systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [
> 12.307051] systemd[1]: systemd-fsck-root.service - File System Check on Root
> Device was skipped because of an unmet condition check
> (ConditionPathExists=!/run/initramfs/fsck-root). [ 12.307112] systemd[1]:
> systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was
> skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
> [ 12.314975] systemd[1]: Starting systemd-journald.service - Journal
> Service... [ 12.503064] systemd[1]: Starting systemd-modules-load.service -
> Load Kernel Modules... [ 12.503112] systemd[1]: systemd-pcrmachine.service -
> TPM PCR Machine ID Measurement was skipped because of an unmet condition
> check (ConditionSecurity=measured-uki). [ 12.504524] systemd[1]: Starting
> systemd-remount-fs.service - Remount Root and Kernel File Systems... [
> 12.504613] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK
> Setup was skipped because of an unmet condition check
> (ConditionSecurity=measured-uki). [ 12.512473] systemd[1]: Starting
> systemd-udev-load-credentials.service - Load udev Rules from Credentials...
> [ 12.541501] systemd[1]: Starting systemd-udev-trigger.service - Coldplug
> All udev Devices... [ 12.545757] systemd[1]: Finished
> kmod-static-nodes.service - Create List of Static Device Nodes. [ 12.546629]
> systemd[1]: modprobe@configfs.service: Deactivated successfully. [
> 12.547023] systemd[1]: Finished modprobe@configfs.service - Load Kernel
> Module configfs. [ 12.547601] systemd[1]: modprobe@drm.service: Deactivated
> successfully. [ 12.547974] systemd[1]: Finished modprobe@drm.service - Load
> Kernel Module drm. [ 12.548522] systemd[1]: modprobe@efi_pstore.service:
> Deactivated successfully. [ 12.548878] systemd[1]: Finished
> modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 12.551089]
> systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 12.551514]
> systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [
> 12.554901] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control
> File System... [ 12.558805] systemd[1]: Mounting sys-kernel-config.mount -
> Kernel Configuration File System... [ 12.563130] systemd[1]: Starting
> systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in
> /dev gracefully... [ 12.761463] systemd[1]: Mounted dev-hugepages.mount -
> Huge Pages File System. [ 12.761699] systemd[1]: Mounted dev-mqueue.mount -
> POSIX Message Queue File System. [ 12.761897] systemd[1]: Mounted
> run-lock.mount - Legacy Locks Directory /run/lock. [ 12.762081] systemd[1]:
> Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 12.762261]
> systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [
> 12.762439] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control
> File System. [ 12.762674] systemd[1]: Mounted sys-kernel-config.mount -
> Kernel Configuration File System. [ 12.873275] EXT4-fs (sda1): re-mounted
> 4b1378ff-7e5c-4646-8564-22b0c96fd3f8 r/w. Quota mode: none. [ 12.875025]
> systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel
> File Systems. [ 12.876668] systemd[1]: systemd-hwdb-update.service - Rebuild
> Hardware Database was skipped because of an unmet condition check
> (ConditionNeedsUpdate=/etc). [ 12.876753] systemd[1]: systemd-pstore.service
> - Platform Persistent Storage Archival was skipped because of an unmet
> condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 12.878242]
> systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random
> Seed... [ 12.878289] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup
> was skipped because of an unmet condition check
> (ConditionSecurity=measured-uki). [ 12.894068] systemd-journald[306]:
> Collecting audit messages is disabled. [ 12.908437] systemd[1]: Finished
> systemd-udev-load-credentials.service - Load udev Rules from Credentials. [
> 12.930596] lp: driver loaded but no devices found [ 12.955211] ppdev:
> user-space parallel port driver [ 12.977655] parport_pc 00:05: reported by
> Plug and Play ACPI [ 12.977744] parport0: PC-style at 0x378 (0x778), irq 5
> [PCSPP,TRISTATE,EPP] [ 13.074765] systemd[1]: Started
> systemd-journald.service - Journal Service. [ 13.082624] lp0: using parport0
> (interrupt-driven). [ 13.391038] systemd-journald[306]: Received client
> request to flush runtime journal. [ 18.341602] ACPI: AC: AC Adapter [AC]
> (on-line) [ 18.435960] sd 0:0:0:0: Attached scsi generic sg0 type 0 [
> 18.436029] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 18.507832]
> hp_accel: hardware type NC693xx found [ 18.508461] lis3lv02d: 8 bits sensor
> found [ 18.542818] input: ST LIS3LV02DL Accelerometer as
> /devices/platform/lis3lv02d/input/input16 [ 18.980945] input: PC Speaker as
> /devices/platform/pcspkr/input/input17 [ 19.143065] input: HP WMI hotkeys as
> /devices/virtual/input/input18 [ 19.158692] cfg80211: Loading compiled-in
> X.509 certificates for regulatory database [ 19.167968] Loaded X.509 cert
> 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 19.168324]
> Loaded X.509 cert 'romain.perier@gmail.com:
> 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 19.168670] Loaded X.509 cert
> 'sforshee: 00b28ddf47aef9cea7' [ 19.169013] Loaded X.509 cert 'wens:
> 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 19.185985] yenta_cardbus
> 0000:85:09.2: CardBus bridge found [103c:30db] [ 19.319320] yenta_cardbus
> 0000:85:09.2: ISA IRQ mask 0x0498, PCI irq 22 [ 19.319334] yenta_cardbus
> 0000:85:09.2: Socket status: 30000810 [ 19.319343] yenta_cardbus
> 0000:85:09.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff] [
> 19.319349] yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window:
> [mem 0xd0500000-0xd05fffff] [ 19.319353] pcmcia_socket pcmcia_socket0: cs:
> memory probe 0xd0500000-0xd05fffff: [ 19.319361] excluding
> 0xd0500000-0xd050ffff [ 19.601409] intel_powerclamp: No package C-state
> available [ 19.620428] Intel(R) Wireless WiFi driver for Linux [ 19.620692]
> iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [
> 19.621649] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id
> 0xa5a5a5a1 wfpm id 0xa5a5a5a1 [ 19.621682] iwlwifi 0000:02:00.0: PCI dev
> 4236/1011, rev=0x24, rfid=0xd55555d5 [ 19.621688] iwlwifi 0000:02:00.0:
> Detected Intel(R) Ultimate N WiFi Link 5300 AGN [ 19.672232] iwlwifi
> 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode
> op_mode iwldvm [ 19.752596] Bluetooth: Core ver 2.22 [ 19.752652] NET:
> Registered PF_BLUETOOTH protocol family [ 19.752654] Bluetooth: HCI device
> and connection manager initialized [ 19.752814] Bluetooth: HCI socket layer
> initialized [ 19.752819] Bluetooth: L2CAP socket layer initialized [
> 19.752830] Bluetooth: SCO socket layer initialized [ 20.024927] usbcore:
> registered new interface driver btusb [ 20.222585] pcmcia_socket
> pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 [ 20.222600]
> pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0510000-0xd05fffff: [
> 20.222846] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
> [ 20.222862] excluding 0xc0000-0xfffff [ 20.222943] pcmcia_socket
> pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 20.222956]
> excluding 0xa0000000-0xa0ffffff [ 20.223000] pcmcia_socket pcmcia_socket0:
> cs: memory probe 0x60000000-0x60ffffff: [ 20.223012] excluding
> 0x60000000-0x60ffffff [ 20.227846] excluding 0xd05fe000-0xd060bfff [
> 20.228004] pcmcia (null): pcmcia: registering new device pcmcia(null) (IRQ:
> 22) [ 20.346846] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984A:
> line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 20.346856]
> snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [
> 20.346860] snd_hda_codec_analog hdaudioC0D0: hp_outs=1
> (0x11/0x0/0x0/0x0/0x0) [ 20.346862] snd_hda_codec_analog hdaudioC0D0: mono:
> mono_out=0x0 [ 20.346864] snd_hda_codec_analog hdaudioC0D0: inputs: [
> 20.346867] snd_hda_codec_analog hdaudioC0D0: Mic=0x14 [ 20.346869]
> snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15 [ 20.346871]
> snd_hda_codec_analog hdaudioC0D0: Line=0x1c [ 20.376890] mc: Linux media
> interface: v0.10 [ 20.413159] scsi host6: pata_pcmcia [ 20.413512] ata7:
> PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22 lpm-pol 0 [ 20.437780] iwlwifi
> 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 20.437789] iwlwifi
> 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 20.437791] iwlwifi
> 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 20.437794] iwlwifi
> 0000:02:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 [
> 20.496124] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [
> 20.570594] ata7: found unknown device (class 0) [ 20.570617] ata7: found
> unknown device (class 0) [ 20.574697] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 20.574786] input: HDA
> Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [
> 20.575763] input: HDA Intel Line as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 20.575906] input: HDA
> Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [
> 20.577861] input: HDA Intel Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 20.599983] iwlwifi
> 0000:02:00.0 wls1: renamed from wlan0 [ 20.652675] videodev: Linux video
> capture interface: v2.00 [ 20.774338] usb 1-5: Found UVC 1.00 device CKA7216
> (04f2:b053) [ 21.399261] Adding 4025340k swap on /dev/sda5. Priority:-2
> extents:1 across:4025340k [ 22.344340] audit: type=1400
> audit(1749942223.824:2): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name="Discord" pid=553 comm="apparmor_parser" [
> 22.354533] audit: type=1400 audit(1749942223.828:3): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="1password" pid=552
> comm="apparmor_parser" [ 22.354541] audit: type=1400
> audit(1749942223.832:4): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=554
> comm="apparmor_parser" [ 22.382138] audit: type=1400
> audit(1749942223.860:5): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name="QtWebEngineProcess" pid=555
> comm="apparmor_parser" [ 22.573229] audit: type=1400
> audit(1749942224.052:6): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name="balena-etcher" pid=563 comm="apparmor_parser" [
> 22.621576] audit: type=1400 audit(1749942224.100:7): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="brave" pid=566
> comm="apparmor_parser" [ 22.670126] audit: type=1400
> audit(1749942224.148:8): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name="buildah" pid=567 comm="apparmor_parser" [
> 22.695815] audit: type=1400 audit(1749942224.176:9): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="busybox" pid=569
> comm="apparmor_parser" [ 22.696047] audit: type=1400
> audit(1749942224.176:10): apparmor="STATUS" operation="profile_load"
> profile="unconfined" name="Xorg" pid=556 comm="apparmor_parser" [ 22.701311]
> audit: type=1400 audit(1749942224.180:11): apparmor="STATUS"
> operation="profile_load" profile="unconfined" name="cam" pid=570
> comm="apparmor_parser" [ 24.919089] input: CKA7216: HP Webcam [2 MP] as
> /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input24 [ 24.919342]
> usbcore: registered new interface driver uvcvideo [ 26.268705] Bluetooth:
> BNEP (Ethernet Emulation) ver 1.3 [ 26.268723] Bluetooth: BNEP filters:
> protocol multicast [ 26.268737] Bluetooth: BNEP socket layer initialized [
> 26.277106] Bluetooth: MGMT ver 1.23 [ 27.531315] Bluetooth: RFCOMM TTY layer
> initialized [ 27.531336] Bluetooth: RFCOMM socket layer initialized [
> 27.531349] Bluetooth: RFCOMM ver 1.11 [ 30.463711] NET: Registered
> PF_QIPCRTR protocol family [ 31.202113] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 31.357098] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [
> 31.423315] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 31.577689] iwlwifi
> 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 32.367851] kauditd_printk_skb: 111
> callbacks suppressed [ 32.367864] audit: type=1400
> audit(1749942233.848:123): apparmor="DENIED" operation="open" class="file"
> profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=932 comm="cupsd"
> requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 32.925713] audit:
> type=1400 audit(1749942234.404:124): apparmor="DENIED" operation="capable"
> class="cap" profile="/usr/sbin/cupsd" pid=932 comm="cupsd" capability=12
> capname="net_admin" [ 35.932419] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 36.085286] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [
> 36.182130] wls1: authenticate with d8:32:14:64:a6:4d (local
> address=00:21:6a:a9:a0:d2) [ 36.182139] wls1: send auth to d8:32:14:64:a6:4d
> (try 1/3) [ 36.184479] wls1: authenticated [ 36.186607] wls1: associate with
> d8:32:14:64:a6:4d (try 1/3) [ 36.190223] wls1: RX AssocResp from
> d8:32:14:64:a6:4d (capab=0x411 status=0 aid=3) [ 36.209029] wls1: associated
> [ 46.015272] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 56.611867] [UFW BLOCK]
> IN=wls1 OUT= MAC= SRC=192.168.1.3 DST=239.255.255.250 LEN=635 TOS=0x00
> PREC=0x00 TTL=1 ID=2249 DF PROTO=UDP SPT=45571 DPT=3702 LEN=615 [ 56.612209]
> [UFW BLOCK] IN=wls1 OUT= MAC= SRC=fe80:0000:0000:0000:0221:6aff:fea9:a0d2
> DST=ff02:0000:0000:0000:0000:0000:0000:000c LEN=655 TC=0 HOPLIMIT=1
> FLOWLBL=935880 PROTO=UDP SPT=43822 DPT=3702 LEN=615 [ 56.753472] [UFW BLOCK]
> IN=wls1 OUT= MAC= SRC=192.168.1.3 DST=239.255.255.250 LEN=635 TOS=0x00
> PREC=0x00 TTL=1 ID=2263 DF PROTO=UDP SPT=45571 DPT=3702 LEN=615 [ 56.789706]
> [UFW BLOCK] IN=wls1 OUT= MAC= SRC=fe80:0000:0000:0000:0221:6aff:fea9:a0d2
> DST=ff02:0000:0000:0000:0000:0000:0000:000c LEN=655 TC=0 HOPLIMIT=1
> FLOWLBL=935880 PROTO=UDP SPT=43822 DPT=3702 LEN=615 [ 57.003085] [UFW BLOCK]
> IN=wls1 OUT= MAC= SRC=192.168.1.3 DST=239.255.255.250 LEN=635 TOS=0x00
> PREC=0x00 TTL=1 ID=2316 DF PROTO=UDP SPT=45571 DPT=3702 LEN=615 [ 57.008278]
> [UFW BLOCK] IN=wls1 OUT= MAC= SRC=fe80:0000:0000:0000:0221:6aff:fea9:a0d2
> DST=ff02:0000:0000:0000:0000:0000:0000:000c LEN=655 TC=0 HOPLIMIT=1
> FLOWLBL=935880 PROTO=UDP SPT=43822 DPT=3702 LEN=615 [ 57.445162] rfkill:
> input handler disabled [ 76.112206] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 106.174669] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 110.489802]
> rfkill: input handler enabled [ 115.564674] rfkill: input handler disabled [
> 126.358596] i915 0000:00:02.0: [drm] HPD interrupt storm detected on
> connector DP-2: switching from hotplug detection to polling [ 136.256050]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 166.342403] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 196.434978] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 226.521425]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 256.605499] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 286.688952] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 316.771603]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 346.854198] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 376.937097] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 407.019494]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 437.102322] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 467.184700] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 473.658616]
> i915 0000:00:02.0: [drm] HPD interrupt storm detected on connector DP-2:
> switching from hotplug detection to polling [ 497.267359] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 527.350209]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 557.430691] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 587.510078] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 596.470624]
> i915 0000:00:02.0: [drm] HPD interrupt storm detected on connector DP-2:
> switching from hotplug detection to polling [ 617.590041] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 647.670531]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 677.751305] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 707.832386] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 737.913701]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 767.995523] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 798.076884] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 828.158674]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 858.240610] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 888.322451] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 918.404449]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 948.486501] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 978.568559] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1008.650632]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1038.732741] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1068.812439] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1098.889817]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1128.967317] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1159.045481] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1189.123975]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1214.343841] perf: interrupt took too long (2538 > 2500), lowering
> kernel.perf_event_max_sample_rate to 78750 [ 1219.202873] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1249.281883]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1279.361323] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1309.440995] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1339.520946]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1369.599754] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1399.680234] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1429.761757]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1459.842090] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1489.922952] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1520.003497]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1550.084521] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1560.577728] wls1:
> deauthenticating from d8:32:14:64:a6:4d by local choice (Reason:
> 3=DEAUTH_LEAVING) [ 1560.714388] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 1560.868846] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
> [ 1561.114831] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 1561.268758]
> iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 1561.380583] PM: suspend
> entry (deep) [ 1561.727346] Filesystems sync: 0.346 seconds [ 1561.734913]
> Freezing user space processes [ 1561.736732] Freezing user space processes
> completed (elapsed 0.001 seconds) [ 1561.736740] OOM killer disabled. [
> 1561.736742] Freezing remaining freezable tasks [ 1561.738011] Freezing
> remaining freezable tasks completed (elapsed 0.001 seconds) [ 1561.739235]
> printk: Suspending console(s) (use no_console_suspend to debug) [
> 1561.918624] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1561.920904]
> ata1.00: Entering standby power mode [ 1561.948048] parport_pc 00:05:
> disabled [ 1561.998497] e1000e: EEE TX LPI TIMER: 00000000 [ 1562.934048]
> ACPI: EC: interrupt blocked [ 1562.946632] ACPI: PM: Preparing to enter
> system sleep state S3 [ 1562.948507] ACPI: EC: event blocked [ 1562.948508]
> ACPI: EC: EC stopped [ 1562.948509] ACPI: PM: Saving platform NVS memory [
> 1562.957578] Disabling non-boot CPUs ... [ 1562.959252] smpboot: CPU 1 is
> now offline [ 1562.963224] ACPI: PM: Low-level resume complete [
> 1562.963224] ACPI: EC: EC started [ 1562.963224] ACPI: PM: Restoring
> platform NVS memory [ 1562.963224] Enabling non-boot CPUs ... [ 1562.963224]
> smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1562.966826] Disabled fast
> string operations [ 1562.969562] CPU1 is up [ 1562.972484] ACPI: PM: Waking
> up from system sleep state S3 [ 1562.989565] ACPI: EC: interrupt unblocked [
> 1562.990363] firewire_ohci 0000:85:09.0: proprietary Ricoh MMC controller
> disabled (via FireWire function) [ 1562.990367] firewire_ohci 0000:85:09.0:
> MMC cards are now supported by standard SDHCI controller [ 1563.719561]
> ACPI: EC: event unblocked [ 1563.719982] usb usb3: root hub lost power or
> was reset [ 1563.720076] usb usb4: root hub lost power or was reset [
> 1563.720165] usb usb5: root hub lost power or was reset [ 1563.722388] usb
> usb7: root hub lost power or was reset [ 1563.722479] usb usb8: root hub
> lost power or was reset [ 1563.723231] usb usb6: root hub lost power or was
> reset [ 1563.723272] sdhci-pci 0000:85:09.1: Will use DMA mode even though
> HW doesn't fully claim to support it. [ 1563.723283] sdhci-pci 0000:85:09.1:
> Will use DMA mode even though HW doesn't fully claim to support it. [
> 1563.754580] i915 0000:00:02.0: [drm] HPD interrupt storm detected on
> connector DP-2: switching from hotplug detection to polling [ 1563.994622]
> usb 3-1: reset full-speed USB device number 2 using uhci_hcd [ 1564.073340]
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1564.073372] ata6:
> SATA link down (SStatus 0 SControl 300) [ 1564.162619] pcieport
> 0000:00:1c.4: pciehp: Timeout on hotplug command 0x0018 (issued 1176 msec
> ago) [ 1564.174576] pcieport 0000:00:1c.2: pciehp: Timeout on hotplug
> command 0x0018 (issued 1188 msec ago) [ 1564.174596] pcieport 0000:00:1c.0:
> pciehp: Timeout on hotplug command 0x0018 (issued 1188 msec ago) [
> 1564.186610] pcieport 0000:00:1c.1: pciehp: Timeout on hotplug command
> 0x0018 (issued 1196 msec ago) [ 1564.247007] ata2.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1564.249752] iwlwifi
> 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 1564.289600] ata2.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1564.289608] ata2.00:
> configured for UDMA/100 [ 1564.310733] firewire_core 0000:85:09.0:
> rediscovered device fw0 [ 1564.411367] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 1564.588799] parport_pc 00:05: activated [ 1564.635333]
> OOM killer enabled. [ 1564.635336] Restarting tasks ... [ 1564.636025] usb
> 4-1: USB disconnect, device number 2 [ 1564.636099] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.636105] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.636111] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.636117] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.636123]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 1564.636293] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 1564.636296] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 1564.636302] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 1564.636308] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 1564.636314] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.636376] done. [
> 1564.636386] random: crng reseeded on system resumption [ 1564.642859]
> yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.642867]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.642874]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.642879]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [
> 1564.642886] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xf0000000-0xf3ffffff] [ 1564.643075] yenta_cardbus 0000:85:09.2: CardBus
> bridge to [bus 86] [ 1564.643079] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2000-0x20ff] [ 1564.643084] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2400-0x24ff] [ 1564.643090] yenta_cardbus 0000:85:09.2: bridge window
> [mem 0xdc000000-0xdfffffff pref] [ 1564.643096] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.643260] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.643263] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.643269] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.643274] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.643280]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 1564.643437] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 1564.643440] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 1564.643446] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 1564.643451] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 1564.643457] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.698966] video LNXVIDEO:00:
> Restoring backlight state [ 1564.699149] PM: suspend exit [ 1564.758625] usb
> 4-1: new full-speed USB device number 3 using uhci_hcd [ 1564.790780] ata7:
> found unknown device (class 0) [ 1564.790808] ata7: found unknown device
> (class 0) [ 1564.904859] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [
> 1564.939342] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810,
> bcdDevice=17.03 [ 1564.939352] usb 4-1: New USB device strings: Mfr=0,
> Product=1, SerialNumber=0 [ 1564.939355] usb 4-1: Product: Fingerprint
> Sensor [ 1565.281421] psmouse serio4: synaptics: queried max coordinates: x
> [..5694], y [..5048] [ 1566.162634] ata1: SATA link up 3.0 Gbps (SStatus 123
> SControl 300) [ 1566.164512] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET
> FEATURES) filtered out [ 1566.164944] sd 0:0:0:0: [sda] Starting disk [
> 1566.167069] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered
> out [ 1566.167452] ata1.00: configured for UDMA/100 [ 1567.295330]
> Bluetooth: MGMT ver 1.23 [ 1568.377609] wls1: authenticate with
> d8:32:14:64:a6:4d (local address=00:21:6a:a9:a0:d2) [ 1568.377621] wls1:
> send auth to d8:32:14:64:a6:4d (try 1/3) [ 1568.380034] wls1: authenticated
> [ 1568.382636] wls1: associate with d8:32:14:64:a6:4d (try 1/3) [
> 1568.386289] wls1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0
> aid=2) [ 1568.407878] wls1: associated [ 1598.319778] [UFW BLOCK] IN=wls1
> OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1628.400766]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1658.482036] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1688.563181] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1718.644313]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1748.725204] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1778.806793] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1808.888167]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1838.969591] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1869.049633] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1899.132341]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 1929.213953] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1959.295170] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 1989.376637]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2019.477102] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2049.539683] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2079.621379]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2109.703385] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2139.784257] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2169.865821]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2199.947523] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2230.043420] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2260.109656]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2290.191993] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2320.273566] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2350.355180]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2380.436718] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2410.518330] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2440.599885]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2470.681505] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2500.763112] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2507.076654]
> wls1: deauthenticating from d8:32:14:64:a6:4d by local choice (Reason:
> 3=DEAUTH_LEAVING) [ 2507.226424] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 2507.380969] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
> [ 2507.582308] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 2507.737309]
> iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 2507.825150] PM: suspend
> entry (deep) [ 2508.277698] Filesystems sync: 0.452 seconds [ 2508.285299]
> Freezing user space processes [ 2508.286766] Freezing user space processes
> completed (elapsed 0.001 seconds) [ 2508.286772] OOM killer disabled. [
> 2508.286773] Freezing remaining freezable tasks [ 2508.288036] Freezing
> remaining freezable tasks completed (elapsed 0.001 seconds) [ 2508.289034]
> printk: Suspending console(s) (use no_console_suspend to debug) [
> 2508.482964] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2508.486285]
> ata1.00: Entering standby power mode [ 2508.513546] parport_pc 00:05:
> disabled [ 2508.565403] e1000e: EEE TX LPI TIMER: 00000000 [ 2509.501972]
> ACPI: EC: interrupt blocked [ 2509.516100] ACPI: PM: Preparing to enter
> system sleep state S3 [ 2509.518901] ACPI: EC: event blocked [ 2509.518906]
> ACPI: EC: EC stopped [ 2509.518909] ACPI: PM: Saving platform NVS memory [
> 2509.541126] Disabling non-boot CPUs ... [ 2509.543443] smpboot: CPU 1 is
> now offline [ 2509.547407] ACPI: PM: Low-level resume complete [
> 2509.547407] ACPI: EC: EC started [ 2509.547407] ACPI: PM: Restoring
> platform NVS memory [ 2509.547407] Enabling non-boot CPUs ... [ 2509.547407]
> smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2509.551866] Disabled fast
> string operations [ 2509.554634] CPU1 is up [ 2509.557429] ACPI: PM: Waking
> up from system sleep state S3 [ 2509.574603] ACPI: EC: interrupt unblocked [
> 2509.575356] firewire_ohci 0000:85:09.0: proprietary Ricoh MMC controller
> disabled (via FireWire function) [ 2509.575360] firewire_ohci 0000:85:09.0:
> MMC cards are now supported by standard SDHCI controller [ 2510.303638] usb
> usb4: root hub lost power or was reset [ 2510.303766] ACPI: EC: event
> unblocked [ 2510.304385] usb usb6: root hub lost power or was reset [
> 2510.304475] usb usb7: root hub lost power or was reset [ 2510.304558] usb
> usb8: root hub lost power or was reset [ 2510.305312] usb usb3: root hub
> lost power or was reset [ 2510.305327] sdhci-pci 0000:85:09.1: Will use DMA
> mode even though HW doesn't fully claim to support it. [ 2510.305337]
> sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim
> to support it. [ 2510.305677] usb usb5: root hub lost power or was reset [
> 2510.578626] usb 3-1: reset full-speed USB device number 2 using uhci_hcd [
> 2510.648757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [
> 2510.648784] ata6: SATA link down (SStatus 0 SControl 300) [ 2510.762586]
> pcieport 0000:00:1c.0: pciehp: Timeout on hotplug command 0x0018 (issued
> 1188 msec ago) [ 2510.770586] pcieport 0000:00:1c.2: pciehp: Timeout on
> hotplug command 0x0018 (issued 1196 msec ago) [ 2510.770589] pcieport
> 0000:00:1c.1: pciehp: Timeout on hotplug command 0x0018 (issued 1196 msec
> ago) [ 2510.770600] pcieport 0000:00:1c.4: pciehp: Timeout on hotplug
> command 0x0018 (issued 1196 msec ago) [ 2510.829576] ata2.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 2510.833743] iwlwifi
> 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 2510.870732] firewire_core
> 0000:85:09.0: rediscovered device fw0 [ 2510.872163] ata2.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 2510.872171] ata2.00:
> configured for UDMA/100 [ 2510.995480] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 2511.190909] parport_pc 00:05: activated [ 2511.235239]
> OOM killer enabled. [ 2511.235241] Restarting tasks ... [ 2511.235481]
> yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 2511.235490]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 2511.235499]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 2511.235506]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [
> 2511.235514] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xf0000000-0xf3ffffff] [ 2511.236048] yenta_cardbus 0000:85:09.2: CardBus
> bridge to [bus 86] [ 2511.236053] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2000-0x20ff] [ 2511.236059] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2400-0x24ff] [ 2511.236065] yenta_cardbus 0000:85:09.2: bridge window
> [mem 0xdc000000-0xdfffffff pref] [ 2511.236071] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 2511.236232] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 2511.236235] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 2511.236241] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 2511.236246] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 2511.236253]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 2511.236428] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 2511.236431] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 2511.236437] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 2511.236442] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 2511.236448] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 2511.236605] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 2511.236609] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 2511.236614] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 2511.236620] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 2511.236626]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 2511.236782] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 2511.236786] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 2511.236791] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 2511.236797] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 2511.236803] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 2511.237202] done. [
> 2511.237212] random: crng reseeded on system resumption [ 2511.238102] usb
> 4-1: USB disconnect, device number 3 [ 2511.294096] video LNXVIDEO:00:
> Restoring backlight state [ 2511.295164] PM: suspend exit [ 2511.310614]
> Bluetooth: MGMT ver 1.23 [ 2511.358595] usb 4-1: new full-speed USB device
> number 4 using uhci_hcd [ 2511.390609] ata7: found unknown device (class 0)
> [ 2511.390637] ata7: found unknown device (class 0) [ 2511.451658] e1000e
> 0000:00:19.0 enp0s25: NIC Link is Down [ 2511.542712] usb 4-1: New USB
> device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03 [ 2511.542723]
> usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [
> 2511.542726] usb 4-1: Product: Fingerprint Sensor [ 2511.884653] psmouse
> serio4: synaptics: queried max coordinates: x [..5694], y [..5048] [
> 2512.698667] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [
> 2512.700534] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered
> out [ 2512.949215] sd 0:0:0:0: [sda] Starting disk [ 2512.951226] ata1.00:
> ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 2512.951574]
> ata1.00: configured for UDMA/100 [ 2514.891293] wls1: authenticate with
> d8:32:14:64:a6:4d (local address=00:21:6a:a9:a0:d2) [ 2514.891303] wls1:
> send auth to d8:32:14:64:a6:4d (try 1/3) [ 2514.893684] wls1: authenticated
> [ 2514.894643] wls1: associate with d8:32:14:64:a6:4d (try 1/3) [
> 2514.898283] wls1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0
> aid=2) [ 2514.921942] wls1: associated [ 2524.586305] [UFW BLOCK] IN=wls1
> OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2554.668058]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2584.748745] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2614.825347] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2644.905385]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2675.005968] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2705.106385] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2735.197691]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2765.286007] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2795.352756] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2825.395990]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2855.460356] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2885.532894] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2915.608715]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 2945.691022] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 2975.771779] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3005.851734]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3035.931125] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3066.009824] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3096.088411]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3126.166877] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3156.245278] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3186.338221]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3216.438931] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3242.362614] perf:
> interrupt took too long (3191 > 3172), lowering
> kernel.perf_event_max_sample_rate to 62500 [ 3246.532559] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3276.619817]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3306.708423] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3336.793259] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3366.876754]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3396.960043] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3413.403583] wls1:
> deauthenticating from d8:32:14:64:a6:4d by local choice (Reason:
> 3=DEAUTH_LEAVING) [ 3413.534414] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 3413.688960] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
> [ 3413.870310] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 3414.029032]
> iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 3414.109533] PM: suspend
> entry (deep) [ 3414.618428] Filesystems sync: 0.508 seconds [ 3414.626363]
> Freezing user space processes [ 3414.628246] Freezing user space processes
> completed (elapsed 0.001 seconds) [ 3414.628255] OOM killer disabled. [
> 3414.628256] Freezing remaining freezable tasks [ 3414.629529] Freezing
> remaining freezable tasks completed (elapsed 0.001 seconds) [ 3414.630671]
> printk: Suspending console(s) (use no_console_suspend to debug) [
> 3414.810792] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3414.812970]
> ata1.00: Entering standby power mode [ 3414.843991] parport_pc 00:05:
> disabled [ 3414.894490] e1000e: EEE TX LPI TIMER: 00000000 [ 3415.826259]
> ACPI: EC: interrupt blocked [ 3415.840597] ACPI: PM: Preparing to enter
> system sleep state S3 [ 3415.843023] ACPI: EC: event blocked [ 3415.843025]
> ACPI: EC: EC stopped [ 3415.843026] ACPI: PM: Saving platform NVS memory [
> 3415.852099] Disabling non-boot CPUs ... [ 3415.853698] smpboot: CPU 1 is
> now offline [ 3415.858565] ACPI: PM: Low-level resume complete [
> 3415.858565] ACPI: EC: EC started [ 3415.858565] ACPI: PM: Restoring
> platform NVS memory [ 3415.858565] Enabling non-boot CPUs ... [ 3415.858565]
> smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3415.856654] Disabled fast
> string operations [ 3415.863334] CPU1 is up [ 3415.866035] ACPI: PM: Waking
> up from system sleep state S3 [ 3415.883544] ACPI: EC: interrupt unblocked [
> 3415.884640] firewire_ohci 0000:85:09.0: proprietary Ricoh MMC controller
> disabled (via FireWire function) [ 3415.884644] firewire_ohci 0000:85:09.0:
> MMC cards are now supported by standard SDHCI controller [ 3415.923677]
> ACPI: EC: event unblocked [ 3415.926171] usb usb4: root hub lost power or
> was reset [ 3415.926262] usb usb5: root hub lost power or was reset [
> 3415.926386] usb usb3: root hub lost power or was reset [ 3415.926645] usb
> usb6: root hub lost power or was reset [ 3415.926733] usb usb7: root hub
> lost power or was reset [ 3415.926818] usb usb8: root hub lost power or was
> reset [ 3415.926925] sdhci-pci 0000:85:09.1: Will use DMA mode even though
> HW doesn't fully claim to support it. [ 3415.926934] sdhci-pci 0000:85:09.1:
> Will use DMA mode even though HW doesn't fully claim to support it. [
> 3416.190636] usb 3-1: reset full-speed USB device number 2 using uhci_hcd [
> 3416.260758] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [
> 3416.260868] ata6: SATA link down (SStatus 0 SControl 300) [ 3416.287376]
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [
> 3416.329950] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered
> out [ 3416.329957] ata2.00: configured for UDMA/100 [ 3416.502890]
> firewire_core 0000:85:09.0: rediscovered device fw0 [ 3416.782991]
> parport_pc 00:05: activated [ 3417.472084] psmouse serio4: synaptics:
> queried max coordinates: x [..5694], y [..5048] [ 3417.518704] pcieport
> 0000:00:1c.4: pciehp: Timeout on hotplug command 0x0018 (issued 1636 msec
> ago) [ 3417.518730] pcieport 0000:00:1c.0: pciehp: Timeout on hotplug
> command 0x0018 (issued 1636 msec ago) [ 3417.546685] pcieport 0000:00:1c.2:
> pciehp: Timeout on hotplug command 0x0018 (issued 1664 msec ago) [
> 3417.550686] pcieport 0000:00:1c.1: pciehp: Timeout on hotplug command
> 0x0018 (issued 1668 msec ago) [ 3417.613742] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 3417.771858] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
> [ 3417.805110] OOM killer enabled. [ 3417.805113] Restarting tasks ... [
> 3417.806464] usb 4-1: USB disconnect, device number 4 [ 3417.806937]
> yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 3417.806943]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 3417.806948]
> yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 3417.806953]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [
> 3417.806958] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xf0000000-0xf3ffffff] [ 3417.807122] yenta_cardbus 0000:85:09.2: CardBus
> bridge to [bus 86] [ 3417.807125] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2000-0x20ff] [ 3417.807130] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2400-0x24ff] [ 3417.807135] yenta_cardbus 0000:85:09.2: bridge window
> [mem 0xdc000000-0xdfffffff pref] [ 3417.807140] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 3417.807299] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 3417.807302] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 3417.807307] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 3417.807313] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 3417.807318]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 3417.807496] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 3417.807500] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 3417.807504] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 3417.807509] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 3417.807514] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 3417.807670] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 3417.807673] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 3417.807678] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 3417.807683] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 3417.807688]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 3417.807844] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 3417.807847] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 3417.807852] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 3417.807857] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 3417.807862] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 3417.807938] done. [
> 3417.807948] random: crng reseeded on system resumption [ 3417.905105]
> Bluetooth: MGMT ver 1.23 [ 3417.914643] video LNXVIDEO:00: Restoring
> backlight state [ 3417.916365] PM: suspend exit [ 3417.928904] usb 4-1: new
> full-speed USB device number 5 using uhci_hcd [ 3418.055459] e1000e
> 0000:00:19.0 enp0s25: NIC Link is Down [ 3418.116703] usb 4-1: New USB
> device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03 [ 3418.116712]
> usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [
> 3418.116714] usb 4-1: Product: Fingerprint Sensor [ 3419.026639] ata1: SATA
> link up 3.0 Gbps (SStatus 123 SControl 300) [ 3419.028491] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 3419.028869] sd 0:0:0:0:
> [sda] Starting disk [ 3419.031014] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 3419.031383] ata1.00:
> configured for UDMA/100 [ 3421.409804] wls1: authenticate with
> d8:32:14:64:a6:4d (local address=00:21:6a:a9:a0:d2) [ 3421.409814] wls1:
> send auth to d8:32:14:64:a6:4d (try 1/3) [ 3421.411581] wls1: authenticated
> [ 3421.414595] wls1: associate with d8:32:14:64:a6:4d (try 1/3) [
> 3421.418317] wls1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0
> aid=2) [ 3421.435660] wls1: associated [ 3422.002735] [UFW BLOCK] IN=wls1
> OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3452.088269]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3482.170813] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3512.252691] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3542.334725]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3572.416650] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3602.498689] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3632.580874]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3662.662865] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3692.748547] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3722.828132]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3752.905608] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3782.989188] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3813.080056]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3843.166262] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3873.250972] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3903.334520]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 3933.408878] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3963.482803] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 3993.563010]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4023.642751] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4053.722449] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4083.804445]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4113.885957] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4143.967716] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4174.047449]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4204.121978] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4234.202083] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4264.280337]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4282.657367] perf: interrupt took too long (4016 > 3988), lowering
> kernel.perf_event_max_sample_rate to 49750 [ 4294.359417] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4319.390681]
> wls1: deauthenticating from d8:32:14:64:a6:4d by local choice (Reason:
> 3=DEAUTH_LEAVING) [ 4319.606388] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 4319.764993] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
> [ 4319.958314] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 4320.112857]
> iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 4320.196354] PM: suspend
> entry (deep) [ 4320.565650] Filesystems sync: 0.369 seconds [ 4320.573122]
> Freezing user space processes [ 4320.574730] Freezing user space processes
> completed (elapsed 0.001 seconds) [ 4320.574737] OOM killer disabled. [
> 4320.574739] Freezing remaining freezable tasks [ 4320.575990] Freezing
> remaining freezable tasks completed (elapsed 0.001 seconds) [ 4320.577035]
> printk: Suspending console(s) (use no_console_suspend to debug) [
> 4320.754601] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4320.756754]
> ata1.00: Entering standby power mode [ 4320.785325] parport_pc 00:05:
> disabled [ 4320.835400] e1000e: EEE TX LPI TIMER: 00000000 [ 4321.769962]
> ACPI: EC: interrupt blocked [ 4321.784674] ACPI: PM: Preparing to enter
> system sleep state S3 [ 4321.789019] ACPI: EC: event blocked [ 4321.789021]
> ACPI: EC: EC stopped [ 4321.789022] ACPI: PM: Saving platform NVS memory [
> 4321.797860] Disabling non-boot CPUs ... [ 4321.799496] smpboot: CPU 1 is
> now offline [ 4321.803476] ACPI: PM: Low-level resume complete [
> 4321.803476] ACPI: EC: EC started [ 4321.803476] ACPI: PM: Restoring
> platform NVS memory [ 4321.803476] Enabling non-boot CPUs ... [ 4321.803476]
> smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4321.802426] Disabled fast
> string operations [ 4321.810024] CPU1 is up [ 4321.812953] ACPI: PM: Waking
> up from system sleep state S3 [ 4321.832672] firewire_ohci 0000:85:09.0:
> proprietary Ricoh MMC controller disabled (via FireWire function) [
> 4321.832677] firewire_ohci 0000:85:09.0: MMC cards are now supported by
> standard SDHCI controller [ 4321.832846] ACPI: EC: interrupt unblocked [
> 4321.833807] ACPI: EC: event unblocked [ 4321.836308] usb usb3: root hub
> lost power or was reset [ 4321.836408] usb usb4: root hub lost power or was
> reset [ 4321.836497] usb usb5: root hub lost power or was reset [
> 4321.836785] usb usb6: root hub lost power or was reset [ 4321.836872] usb
> usb7: root hub lost power or was reset [ 4321.836958] usb usb8: root hub
> lost power or was reset [ 4321.837628] sdhci-pci 0000:85:09.1: Will use DMA
> mode even though HW doesn't fully claim to support it. [ 4321.837639]
> sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim
> to support it. [ 4322.098627] usb 3-1: reset full-speed USB device number 2
> using uhci_hcd [ 4322.172717] ata2: SATA link up 1.5 Gbps (SStatus 113
> SControl 300) [ 4322.172750] ata6: SATA link down (SStatus 0 SControl 300) [
> 4322.210503] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered
> out [ 4322.253156] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES)
> filtered out [ 4322.253167] ata2.00: configured for UDMA/100 [ 4322.422870]
> firewire_core 0000:85:09.0: rediscovered device fw0 [ 4322.696935]
> parport_pc 00:05: activated [ 4322.838757] pcmcia_socket pcmcia_socket0: ***
> DANGER *** unable to remove socket power [ 4323.386436] psmouse serio4:
> synaptics: queried max coordinates: x [..5694], y [..5048] [ 4323.486591]
> pcieport 0000:00:1c.1: pciehp: Timeout on hotplug command 0x0018 (issued
> 1656 msec ago) [ 4323.538054] pcieport 0000:00:1c.2: pciehp: Timeout on
> hotplug command 0x0018 (issued 1704 msec ago) [ 4323.549784] iwlwifi
> 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 4323.550570] pcieport 0000:00:1c.4:
> pciehp: Timeout on hotplug command 0x0018 (issued 1720 msec ago) [
> 4323.550591] pcieport 0000:00:1c.0: pciehp: Timeout on hotplug command
> 0x0018 (issued 1720 msec ago) [ 4323.707637] iwlwifi 0000:02:00.0: Radio
> type=0x0-0x2-0x0 [ 4323.737635] OOM killer enabled. [ 4323.737642]
> Restarting tasks ... [ 4323.738216] yenta_cardbus 0000:85:09.2: CardBus
> bridge to [bus 86] [ 4323.738225] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2000-0x20ff] [ 4323.738233] yenta_cardbus 0000:85:09.2: bridge window
> [io 0x2400-0x24ff] [ 4323.738240] yenta_cardbus 0000:85:09.2: bridge window
> [mem 0xdc000000-0xdfffffff pref] [ 4323.738247] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 4323.738463] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 4323.738466] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 4323.738472] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 4323.738478] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 4323.738484]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 4323.738681] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 4323.738684] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 4323.738690] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 4323.738696] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 4323.738702] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 4323.738883] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 4323.738886] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 4323.738892] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 4323.738898] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 4323.738904]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 4323.739063] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [
> 4323.739066] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [
> 4323.739072] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [
> 4323.739078] yenta_cardbus 0000:85:09.2: bridge window [mem
> 0xdc000000-0xdfffffff pref] [ 4323.739084] yenta_cardbus 0000:85:09.2:
> bridge window [mem 0xf0000000-0xf3ffffff] [ 4323.739242] yenta_cardbus
> 0000:85:09.2: CardBus bridge to [bus 86] [ 4323.739245] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 4323.739252] yenta_cardbus
> 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 4323.739257] yenta_cardbus
> 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 4323.739263]
> yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [
> 4323.742913] done. [ 4323.742925] random: crng reseeded on system resumption
> [ 4323.744998] usb 4-1: USB disconnect, device number 5 [ 4323.803400]
> Bluetooth: MGMT ver 1.23 [ 4323.839890] video LNXVIDEO:00: Restoring
> backlight state [ 4323.840681] PM: suspend exit [ 4323.862746] usb 4-1: new
> full-speed USB device number 6 using uhci_hcd [ 4324.006057] e1000e
> 0000:00:19.0 enp0s25: NIC Link is Down [ 4324.043523] usb 4-1: New USB
> device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03 [ 4324.043532]
> usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [
> 4324.043536] usb 4-1: Product: Fingerprint Sensor [ 4324.954688] ata1: SATA
> link up 3.0 Gbps (SStatus 123 SControl 300) [ 4324.956549] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 4325.202800] sd 0:0:0:0:
> [sda] Starting disk [ 4325.205156] ata1.00: ACPI cmd
> ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 4325.205534] ata1.00:
> configured for UDMA/100 [ 4327.409119] wls1: authenticate with
> d8:32:14:64:a6:4d (local address=00:21:6a:a9:a0:d2) [ 4327.409132] wls1:
> send auth to d8:32:14:64:a6:4d (try 1/3) [ 4327.411474] wls1: authenticated
> [ 4327.414622] wls1: associate with d8:32:14:64:a6:4d (try 1/3) [
> 4327.418269] wls1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0
> aid=2) [ 4327.435511] wls1: associated [ 4327.777316] [UFW BLOCK] IN=wls1
> OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4357.857100]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4387.937039] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4418.017562] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4448.098530]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4478.178862] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4508.259898] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4538.341034]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4568.430768] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4598.502861] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4628.584112]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4658.665269] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4688.746536] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4718.827497]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4748.908835] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4779.009144] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4809.071588]
> [UFW BLOCK] IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00
> SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF
> PROTO=2 [ 4839.152867] [UFW BLOCK] IN=wls1 OUT=
> MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1 DST=224.0.0.1
> LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 4869.234007] [UFW BLOCK]
> IN=wls1 OUT= MAC=00:21:6a:a9:a0:d2:d8:32:14:64:a6:48:08:00 SRC=192.168.1.1
> DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
> 
> ----------------------------------------------------------------------------------------------------------------------------------------------

thanks a lot for reporting back, so will close the issue with the
6.12.30-1 verison 6.12.32-1 is planned to migrate soonish to testing
and so for trixie.

Regards,
Salvatore
Reply to:
References:
- Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu
  - From: JoE <joe2014knowbody@gmail.com>
- Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu
  - From: Salvatore Bonaccorso <carnil@debian.org>
Prev by Date: Processing of linux_6.12.30-1~bpo12+1_source.changes
Next by Date: Bug#1100895: Boot logs from versions 6.1.0-27-amd64 (booting), 6.1.0-28-amd64 (failing) and 6.1.0-32-amd64 (failing)
Previous by thread: Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu
Next by thread: Processed: Re: Bug#1107299: kernel: watchdog: Watchdog detected hard LOCKUP on cpu
Index(es):
- Date
- Thread