Control: tag -1 + moreinfo Hello, On Mon, Jun 09, 2025 at 12:16:13PM +0200, Roland Sommer wrote: > > Please provide as well as full boot log up to when triggering the > > issue so we can see more context. > > I hope you wanted me to paste the complete dmesg output: Yes, pasting without eating the \n characters would have been nice. I invested some time to reformat the paste: > [ 0.000000] Linux version 6.1.0-37-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.140-1 (2025-05-22) > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64 root=UUID=a69a5304-91ba-4e55-89af-c48a103c39b0 ro nomodeset ipv6.disable=1 quiet > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeaffff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000bfeb0000-0x00000000bfec4fff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000bfec5000-0x00000000bfec7fff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x00000000bfec8000-0x00000000bfffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.5 present. > [ 0.000000] DMI: FUJITSU ESPRIMO P7936 /D3012-A1, BIOS 6.00 R1.06.3012.A1 04/21/2011 > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 2833.306 MHz processor > [ 0.002693] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.002696] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.002703] last_pfn = 0x430000 max_arch_pfn = 0x400000000 > [ 0.003455] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT > [ 0.003807] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved > [ 0.003818] last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000 > [ 0.012117] found SMP MP-table at [mem 0x000f8fc0-0x000f8fcf] > [ 0.012746] RAMDISK: [mem 0x31667000-0x34b2afff] > [ 0.012752] ACPI: Early table checksum verification disabled > [ 0.012756] ACPI: RSDP 0x00000000000F8EC0 000024 (v02 PTLTD ) > [ 0.012761] ACPI: XSDT 0x00000000BFEBF8C1 000074 (v01 FSC PC 00060000 LTP 00000000) > [ 0.012768] ACPI: FACP 0x00000000BFEC4AC1 0000F4 (v03 FSC PC 00060000 000F4240) > [ 0.012773] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20220331/tbfadt-564) > [ 0.012777] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20220331/tbfadt-564) > [ 0.012779] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20220331/tbfadt-564) > [ 0.012782] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20220331/tbfadt-669) > [ 0.012785] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20220331/tbfadt-669) > [ 0.012789] ACPI: DSDT 0x00000000BFEBF935 005118 (v01 FSC D3012/A1 00060000 MSFT 03000001) > [ 0.012793] ACPI: FACS 0x00000000BFEC7FC0 000040 > [ 0.012796] ACPI: FACS 0x00000000BFEC7FC0 000040 > [ 0.012800] ACPI: TCPA 0x00000000BFEC4BB5 000032 (v01 Phoeni x 00060000 TL 00000000) > [ 0.012804] ACPI: DMAR 0x00000000BFEC4BE7 0000B0 (v01 Intel OEMDMAR 00060000 LOHR 00000001) > [ 0.012807] ACPI: SPCR 0x00000000BFEC4C97 000050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001) > [ 0.012811] ACPI: SLIC 0x00000000BFEC4CE7 000176 (v01 FSC PC 00060000 LTP 00000000) > [ 0.012815] ACPI: MCFG 0x00000000BFEC4E5D 00003C (v01 PTLTD MCFG 00060000 LTP 00000000) > [ 0.012819] ACPI: HPET 0x00000000BFEC4E99 000038 (v01 PTLTD HPETTBL 00060000 LTP 00000001) > [ 0.012823] ACPI: APIC 0x00000000BFEC4ED1 000084 (v01 PTLTD ? APIC 00060000 LTP 00000000) > [ 0.012827] ACPI: BOOT 0x00000000BFEC4F55 000028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001) > [ 0.012831] ACPI: ASF! 0x00000000BFEC4F7D 000083 (v16 CETP CETP 00060000 PTL 00000001) > [ 0.012834] ACPI: Reserving FACP table memory at [mem 0xbfec4ac1-0xbfec4bb4] > [ 0.012836] ACPI: Reserving DSDT table memory at [mem 0xbfebf935-0xbfec4a4c] > [ 0.012837] ACPI: Reserving FACS table memory at [mem 0xbfec7fc0-0xbfec7fff] > [ 0.012838] ACPI: Reserving FACS table memory at [mem 0xbfec7fc0-0xbfec7fff] > [ 0.012839] ACPI: Reserving TCPA table memory at [mem 0xbfec4bb5-0xbfec4be6] > [ 0.012841] ACPI: Reserving DMAR table memory at [mem 0xbfec4be7-0xbfec4c96] > [ 0.012842] ACPI: Reserving SPCR table memory at [mem 0xbfec4c97-0xbfec4ce6] > [ 0.012843] ACPI: Reserving SLIC table memory at [mem 0xbfec4ce7-0xbfec4e5c] > [ 0.012844] ACPI: Reserving MCFG table memory at [mem 0xbfec4e5d-0xbfec4e98] > [ 0.012845] ACPI: Reserving HPET table memory at [mem 0xbfec4e99-0xbfec4ed0] > [ 0.012846] ACPI: Reserving APIC table memory at [mem 0xbfec4ed1-0xbfec4f54] > [ 0.012847] ACPI: Reserving BOOT table memory at [mem 0xbfec4f55-0xbfec4f7c] > [ 0.012849] ACPI: Reserving ASF! table memory at [mem 0xbfec4f7d-0xbfec4fff] > [ 0.012929] No NUMA configuration found > [ 0.012930] Faking a node at [mem 0x0000000000000000-0x000000042fffffff] > [ 0.012943] NODE_DATA(0) allocated [mem 0x42ffd1000-0x42fffbfff] > [ 0.013311] Zone ranges: > [ 0.013312] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.013314] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > [ 0.013316] Normal [mem 0x0000000100000000-0x000000042fffffff] > [ 0.013318] Device empty > [ 0.013319] Movable zone start for each node > [ 0.013322] Early memory node ranges > [ 0.013323] node 0: [mem 0x0000000000001000-0x000000000009bfff] > [ 0.013324] node 0: [mem 0x0000000000100000-0x00000000bfeaffff] > [ 0.013326] node 0: [mem 0x0000000100000000-0x000000042fffffff] > [ 0.013330] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff] > [ 0.013339] On node 0, zone DMA: 1 pages in unavailable ranges > [ 0.013448] On node 0, zone DMA: 100 pages in unavailable ranges > [ 0.035945] On node 0, zone Normal: 336 pages in unavailable ranges > [ 0.036131] ACPI: PM-Timer IO Port: 0x1008 > [ 0.036140] ACPI: LAPIC_NMI (acpi_id [0x00] high edge lint [0x1]) > [ 0.036142] ACPI: LAPIC_NMI (acpi_id [0x01] high edge lint [0x1]) > [ 0.036143] ACPI: LAPIC_NMI (acpi_id [0x02] high edge lint [0x1]) > [ 0.036144] ACPI: LAPIC_NMI (acpi_id [0x03] high edge lint [0x1]) > [ 0.036158] IOAPIC [0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > [ 0.036161] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.036164] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.036168] ACPI: Using ACPI (MADT) for SMP configuration information > [ 0.036170] ACPI: HPET id: 0x8086a701 base: 0xfed00000 > [ 0.036175] ACPI: SPCR: SPCR table version 1 > [ 0.036177] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size > [ 0.036178] ACPI: SPCR: console: uart,mmio,0x0 > [ 0.036181] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.036199] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] > [ 0.036202] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] > [ 0.036204] PM: hibernation: Registered nosave memory: [mem 0xbfeb0000-0xffffffff] > [ 0.036207] [mem 0xc0000000-0xf7ffffff] available for PCI devices > [ 0.036208] Booting paravirtualized kernel on bare hardware > [ 0.036211] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns > [ 0.042636] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > [ 0.043160] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 > [ 0.043167] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 > [ 0.043171] pcpu-alloc: [0] 0 1 2 3 > [ 0.043207] Fallback order for Node 0: 0 [ 0.043211] Built 1 zonelists, mobility grouping on. Total pages: 4063669 > [ 0.043214] Policy zone: Normal > [ 0.043216] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64 root=UUID=a69a5304-91ba-4e55-89af-c48a103c39b0 ro nomodeset ipv6.disable=1 quiet > [ 0.043274] Booted with the nomodeset parameter. Only the system framebuffer will be available > [ 0.043301] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64", will be passed to user space. > [ 0.046996] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) > [ 0.048930] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) > [ 0.048996] mem auto-init: stack:all(zero), heap alloc:on, heap free:off > [ 0.049009] software IO TLB: area num 4. > [ 0.121220] Memory: 3101288K/16513324K available (14343K kernel code, 2339K rwdata, 9096K rodata, 2800K init, 17380K bss, 458140K reserved, 0K cma-reserved) > [ 0.121609] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.121632] Kernel/User page tables isolation: enabled > [ 0.121691] ftrace: allocating 40346 entries in 158 pages > [ 0.130077] ftrace: allocated 158 pages with 5 groups > [ 0.130970] Dynamic Preempt: voluntary > [ 0.131028] rcu: Preemptible hierarchical RCU implementation. > [ 0.131029] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. > [ 0.131031] Trampoline variant of Tasks RCU enabled. > [ 0.131032] Rude variant of Tasks RCU enabled. > [ 0.131033] Tracing variant of Tasks RCU enabled. > [ 0.131034] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > [ 0.131035] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > [ 0.137476] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 > [ 0.137681] rcu: srcu_init: Setting srcu_struct sizes based on contention. > [ 0.137760] Console: colour dummy device 80x25 > [ 0.137788] printk: console [tty0] enabled > [ 0.137821] ACPI: Core revision 20220331 > [ 0.137920] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns > [ 0.137938] APIC: Switch to symmetric I/O mode setup > [ 0.137941] DMAR: Host address width 36 > [ 0.137942] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 > [ 0.137950] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000 > [ 0.137953] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 > [ 0.137957] DMAR: dmar1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000 > [ 0.137959] DMAR: RMRR base: 0x000000bfec8000 end: 0x000000bfefffff > [ 0.138412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.157938] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28d72822a29, max_idle_ns: 440795348310 ns > [ 0.157945] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.61 BogoMIPS (lpj=11333224) > [ 0.157969] CPU0: Thermal monitoring enabled (TM2) > [ 0.157988] process: using mwait in idle threads > [ 0.157991] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 > [ 0.157993] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 > [ 0.157997] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization > [ 0.158000] Spectre V2 : Mitigation: Retpolines > [ 0.158001] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT > [ 0.158003] Speculative Store Bypass: Vulnerable > [ 0.158005] MDS: Vulnerable: Clear CPU buffers attempted, no microcode > [ 0.158006] MMIO Stale Data: Unknown: No mitigations > [ 0.158011] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' > [ 0.158013] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' > [ 0.158014] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. > [ 0.173516] Freeing SMP alternatives memory: 36K > [ 0.173525] pid_max: default: 32768 minimum: 301 > [ 0.173615] LSM: Security Framework initializing > [ 0.173641] landlock: Up and running. > [ 0.173642] Yama: disabled by default; enable with sysctl kernel.yama.* > [ 0.173688] AppArmor: AppArmor initialized > [ 0.173691] TOMOYO Linux initialized > [ 0.173700] LSM support for eBPF active > [ 0.173800] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) > [ 0.173854] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) > [ 0.286522] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9505 @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa) > [ 0.286732] cblist_init_generic: Setting adjustable number of callback queues. > [ 0.286734] cblist_init_generic: Setting shift to 2 and lim to 1. > [ 0.286763] cblist_init_generic: Setting adjustable number of callback queues. > [ 0.286764] cblist_init_generic: Setting shift to 2 and lim to 1. > [ 0.286788] cblist_init_generic: Setting adjustable number of callback queues. > [ 0.286789] cblist_init_generic: Setting shift to 2 and lim to 1. > [ 0.286811] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. > [ 0.286833] ... version: 2 > [ 0.286835] ... bit width: 40 > [ 0.286836] ... generic registers: 2 > [ 0.286837] ... value mask: 000000ffffffffff > [ 0.286838] ... max period: 000000007fffffff > [ 0.286839] ... fixed-purpose events: 3 > [ 0.286840] ... event mask: 0000000700000003 > [ 0.286970] signal: max sigframe size: 1520 > [ 0.287004] rcu: Hierarchical SRCU implementation. > [ 0.287005] rcu: Max phase no-delay instances is 1000. > [ 0.287547] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. > [ 0.287642] smp: Bringing up secondary CPUs ... > [ 0.287794] x86: Booting SMP configuration: > [ 0.287796] .... node #0, CPUs: #1 #2 #3 > [ 0.294037] smp: Brought up 1 node, 4 CPUs > [ 0.294037] smpboot: Max logical packages: 1 > [ 0.294037] smpboot: Total of 4 processors activated (22666.44 BogoMIPS) > [ 0.360687] node 0 deferred pages initialised in 60ms > [ 0.362010] devtmpfs: initialized > [ 0.362094] x86/mm: Memory block size: 128MB > [ 0.364313] ACPI: PM: Registering ACPI NVS region [mem 0xbfec5000-0xbfec7fff] (12288 bytes) > [ 0.364313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.364313] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) > [ 0.364313] pinctrl core: initialized pinctrl subsystem > [ 0.364313] NET: Registered PF_NETLINK/PF_ROUTE protocol family > [ 0.366429] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations > [ 0.366945] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > [ 0.367473] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > [ 0.367501] audit: initializing netlink subsys (disabled) > [ 0.367558] thermal_sys: Registered thermal governor 'fair_share' > [ 0.367558] thermal_sys: Registered thermal governor 'bang_bang' > [ 0.367558] thermal_sys: Registered thermal governor 'step_wise' > [ 0.367558] thermal_sys: Registered thermal governor 'user_space' > [ 0.367558] thermal_sys: Registered thermal governor 'power_allocator' > [ 0.367558] cpuidle: using governor ladder > [ 0.367558] cpuidle: using governor menu > [ 0.367558] Simple Boot Flag at 0x44 set to 0x1 > [ 0.367558] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.367558] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xf8000000-0xf84fffff] (base 0xf8000000) > [ 0.367558] PCI: MMCONFIG at [mem 0xf8000000-0xf84fffff] reserved in E820 > [ 0.367558] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. > [ 0.367558] PCI: Using configuration type 1 for base access > [ 0.367955] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. > [ 0.367968] audit: type=2000 audit(1749458855.228:1): state=initialized audit_enabled=0 res=1 > [ 0.369971] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages > [ 0.369971] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page > [ 0.370115] ACPI: Added _OSI(Module Device) > [ 0.370117] ACPI: Added _OSI(Processor Device) > [ 0.370119] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.370120] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.370188] ACPI: 1 ACPI AML tables successfully acquired and loaded > [ 0.394566] ACPI: Interpreter enabled > [ 0.394566] ACPI: PM: (supports S0 S3 S4 S5) > [ 0.394566] ACPI: Using IOAPIC for interrupt routing > [ 0.394566] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.394566] PCI: Using E820 reservations for host bridge windows > [ 0.394566] ACPI: Enabled 11 GPEs in block 00 to 3F > [ 0.399986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.399995] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] > [ 0.400001] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] > [ 0.400003] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] > [ 0.400005] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) > [ 0.400013] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-04] only partially covers this bridge > [ 0.400633] PCI host bridge to bus 0000:00 > [ 0.400635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] > [ 0.400638] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > [ 0.400640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] > [ 0.400643] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e3fff window] > [ 0.400645] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window] > [ 0.400647] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window] > [ 0.400648] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfedfffff window] > [ 0.400650] pci_bus 0000:00: root bus resource [mem 0xfef00000-0xffafffff window] > [ 0.400652] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffefffff window] > [ 0.400654] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.400672] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 > [ 0.400693] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset > [ 0.400695] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability > [ 0.400760] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400 > [ 0.400807] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.400940] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 > [ 0.400957] pci 0000:00:19.0: reg 0x10: [mem 0xfd400000-0xfd41ffff] > [ 0.400967] pci 0000:00:19.0: reg 0x14: [mem 0xfd427000-0xfd427fff] > [ 0.400976] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] > [ 0.401042] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > [ 0.401139] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 > [ 0.401184] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] > [ 0.401308] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 > [ 0.401353] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] > [ 0.401477] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 > [ 0.401522] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f] > [ 0.401654] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 > [ 0.401670] pci 0000:00:1a.7: reg 0x10: [mem 0xfd428000-0xfd4283ff] > [ 0.401751] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.401851] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 > [ 0.401872] pci 0000:00:1b.0: reg 0x10: [mem 0xfd420000-0xfd423fff 64bit] > [ 0.401966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.402077] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 > [ 0.402174] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.402314] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400 > [ 0.402411] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.402536] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 > [ 0.402580] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf] > [ 0.402714] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 > [ 0.402759] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df] > [ 0.402883] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 > [ 0.402927] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff] > [ 0.403059] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 > [ 0.403075] pci 0000:00:1d.7: reg 0x10: [mem 0xfd429000-0xfd4293ff] > [ 0.403156] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.403258] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 > [ 0.403404] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 > [ 0.403642] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 > [ 0.403658] pci 0000:00:1f.2: reg 0x10: [io 0x1ca0-0x1ca7] > [ 0.403668] pci 0000:00:1f.2: reg 0x14: [io 0x1c94-0x1c97] > [ 0.403678] pci 0000:00:1f.2: reg 0x18: [io 0x1c98-0x1c9f] > [ 0.403687] pci 0000:00:1f.2: reg 0x1c: [io 0x1c90-0x1c93] > [ 0.403696] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] > [ 0.403705] pci 0000:00:1f.2: reg 0x24: [mem 0xfd42a000-0xfd42a7ff] > [ 0.403754] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.403844] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 > [ 0.403864] pci 0000:00:1f.3: reg 0x10: [mem 0xfd42b000-0xfd42b0ff 64bit] > [ 0.403888] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f] > [ 0.403988] pci 0000:01:00.0: [10de:1d01] type 00 class 0x030000 > [ 0.404001] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff] > [ 0.404011] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.404022] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref] > [ 0.404029] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] > [ 0.404036] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] > [ 0.404057] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] > [ 0.404128] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:01.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) > [ 0.404207] pci 0000:01:00.1: [10de:0fb8] type 00 class 0x040300 > [ 0.404219] pci 0000:01:00.1: reg 0x10: [mem 0xfd000000-0xfd003fff] > [ 0.404357] pci 0000:00:01.0: PCI bridge to [bus 01] > [ 0.404360] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] > [ 0.404363] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfd0fffff] > [ 0.404366] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref] > [ 0.404409] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.404464] pci 0000:00:1c.4: PCI bridge to [bus 03] > [ 0.404493] pci_bus 0000:04: extended config space not accessible > [ 0.404524] pci 0000:04:07.0: [8086:1229] type 00 class 0x020000 > [ 0.404540] pci 0000:04:07.0: reg 0x10: [mem 0xfd500000-0xfd500fff pref] > [ 0.404549] pci 0000:04:07.0: reg 0x14: [io 0x3000-0x301f] > [ 0.404559] pci 0000:04:07.0: reg 0x18: [mem 0xfd300000-0xfd3fffff] > [ 0.404589] pci 0000:04:07.0: reg 0x30: [mem 0x00000000-0x000fffff pref] > [ 0.404619] pci 0000:04:07.0: supports D1 D2 > [ 0.404620] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot > [ 0.404696] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) > [ 0.404700] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] > [ 0.404704] pci 0000:00:1e.0: bridge window [mem 0xfd300000-0xfd3fffff] > [ 0.404710] pci 0000:00:1e.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref] > [ 0.404712] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) > [ 0.404715] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) > [ 0.404716] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) > [ 0.404718] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000e3fff window] (subtractive decode) > [ 0.404720] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode) > [ 0.404722] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode) > [ 0.404724] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfedfffff window] (subtractive decode) > [ 0.404726] pci 0000:00:1e.0: bridge window [mem 0xfef00000-0xffafffff window] (subtractive decode) > [ 0.404728] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffefffff window] (subtractive decode) > [ 0.404945] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 > [ 0.404997] ACPI: PCI: Interrupt link LNKB configured for IRQ 5 > [ 0.405047] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 > [ 0.405097] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 > [ 0.405152] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 > [ 0.405202] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 > [ 0.405252] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 > [ 0.405302] ACPI: PCI: Interrupt link LNKH configured for IRQ 9 > [ 0.405973] iommu: Default domain type: Translated > [ 0.405973] iommu: DMA domain TLB invalidation policy: lazy mode > [ 0.406090] pps_core: LinuxPPS API ver. 1 registered > [ 0.406092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > [ 0.406095] PTP clock support registered > [ 0.406108] EDAC MC: Ver: 3.0.0 > [ 0.406206] NetLabel: Initializing > [ 0.406208] NetLabel: domain hash size = 128 > [ 0.406209] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO > [ 0.406229] NetLabel: unlabeled traffic allowed by default > [ 0.406230] PCI: Using ACPI for IRQ routing > [ 0.406232] PCI: pci_cache_line_size set to 64 bytes > [ 0.406286] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] > [ 0.406288] e820: reserve RAM buffer [mem 0xbfeb0000-0xbfffffff] > [ 0.406316] pci 0000:01:00.0: vgaarb: setting as boot VGA device > [ 0.406316] pci 0000:01:00.0: vgaarb: bridge control possible > [ 0.406316] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none > [ 0.406316] vgaarb: loaded > [ 0.406316] hpet: 8 channels of 4 reserved for per-cpu timers > [ 0.406316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 0 > [ 0.406316] hpet0: 8 comparators, 64-bit 14.318180 MHz counter > [ 0.408073] clocksource: Switched to clocksource tsc-early > [ 0.408073] VFS: Disk quotas dquot_6.6.0 > [ 0.408073] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.408073] AppArmor: AppArmor Filesystem Enabled > [ 0.408073] pnp: PnP ACPI init > [ 0.408073] system 00:00: [io 0x04d0-0x04d1] has been reserved > [ 0.408073] system 00:00: [io 0x1000-0x107f] has been reserved > [ 0.408073] system 00:00: [io 0x1180-0x11bf] has been reserved > [ 0.408073] system 00:00: [io 0x0500-0x057f] has been reserved > [ 0.408073] system 00:00: [io 0x0800-0x080f] has been reserved > [ 0.408073] system 00:00: [io 0x0810-0x081f] has been reserved > [ 0.408073] system 00:00: [io 0xfe00] has been reserved > [ 0.408073] system 00:00: [io 0xff00] has been reserved > [ 0.408073] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved > [ 0.408073] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved > [ 0.408073] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.408073] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved > [ 0.408073] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved > [ 0.408073] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved > [ 0.408073] pnp: PnP ACPI: found 6 devices > [ 0.415201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns > [ 0.415354] NET: Registered PF_INET protocol family > [ 0.416050] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) > [ 0.420445] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) > [ 0.420548] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) > [ 0.420856] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) > [ 0.421620] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) > [ 0.422096] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.422443] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) > [ 0.422573] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) > [ 0.422671] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) > [ 0.422779] NET: Registered PF_UNIX/PF_LOCAL protocol family > [ 0.422794] NET: Registered PF_XDP protocol family > [ 0.422810] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 > [ 0.422815] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 > [ 0.422818] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 > [ 0.422821] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 > [ 0.422824] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 > [ 0.422826] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 > [ 0.422843] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] > [ 0.422850] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffffc00000 64bit pref] for e820 entry [mem 0xffb00000-0xffffffff] > [ 0.422854] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] > [ 0.422857] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0400000-0xc05fffff] > [ 0.422862] clipped [mem size 0x00000000 64bit pref] to [mem size 0xffffffffffc00000 64bit pref] for e820 entry [mem 0xffb00000-0xffffffff] > [ 0.422865] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] > [ 0.422869] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] > [ 0.422872] pci 0000:00:1c.4: BAR 13: assigned [io 0x5000-0x5fff] > [ 0.422877] pci 0000:00:01.0: PCI bridge to [bus 01] > [ 0.422880] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] > [ 0.422883] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfd0fffff] > [ 0.422886] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref] > [ 0.422889] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.422892] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > [ 0.422897] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] > [ 0.422901] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] > [ 0.422907] pci 0000:00:1c.4: PCI bridge to [bus 03] > [ 0.422910] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] > [ 0.422915] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff] > [ 0.422919] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] > [ 0.422928] pci 0000:04:07.0: BAR 6: assigned [mem 0xc0800000-0xc08fffff pref] > [ 0.422930] pci 0000:00:1e.0: PCI bridge to [bus 04] > [ 0.422933] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] > [ 0.422938] pci 0000:00:1e.0: bridge window [mem 0xfd300000-0xfd3fffff] > [ 0.422942] pci 0000:00:1e.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref] > [ 0.422949] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] > [ 0.422951] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] > [ 0.422952] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] > [ 0.422954] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e3fff window] > [ 0.422956] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window] > [ 0.422958] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window] > [ 0.422960] pci_bus 0000:00: resource 10 [mem 0xfed00000-0xfedfffff window] > [ 0.422961] pci_bus 0000:00: resource 11 [mem 0xfef00000-0xffafffff window] > [ 0.422963] pci_bus 0000:00: resource 12 [mem 0xffc00000-0xffefffff window] > [ 0.422965] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] > [ 0.422967] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfd0fffff] > [ 0.422969] pci_bus 0000:01: resource 2 [mem 0xde000000-0xefffffff 64bit pref] > [ 0.422971] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] > [ 0.422973] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] > [ 0.422975] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] > [ 0.422977] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] > [ 0.422978] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc05fffff] > [ 0.422980] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] > [ 0.422982] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] > [ 0.422984] pci_bus 0000:04: resource 1 [mem 0xfd300000-0xfd3fffff] > [ 0.422986] pci_bus 0000:04: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref] > [ 0.422988] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] > [ 0.422989] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] > [ 0.422991] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] > [ 0.422993] pci_bus 0000:04: resource 7 [mem 0x000d4000-0x000e3fff window] > [ 0.422995] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xf7ffffff window] > [ 0.422996] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfebfffff window] > [ 0.422998] pci_bus 0000:04: resource 10 [mem 0xfed00000-0xfedfffff window] > [ 0.423000] pci_bus 0000:04: resource 11 [mem 0xfef00000-0xffafffff window] > [ 0.423002] pci_bus 0000:04: resource 12 [mem 0xffc00000-0xffefffff window] > [ 0.424814] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec > [ 0.424850] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 > [ 0.424904] pci 0000:04:07.0: Firmware left e100 interrupts enabled; disabling > [ 0.424909] PCI: CLS 32 bytes, default 64 > [ 0.424937] DMAR: No ATSR found > [ 0.424938] DMAR: No SATC found > [ 0.424943] DMAR: dmar0: Using Register based invalidation > [ 0.424950] DMAR: dmar1: Using Register based invalidation > [ 0.425023] Trying to unpack rootfs image as initramfs... > [ 0.488395] pci 0000:00:1b.0: Adding to iommu group 0 > [ 0.488560] pci 0000:00:00.0: Adding to iommu group 1 > [ 0.488577] pci 0000:00:01.0: Adding to iommu group 2 > [ 0.488590] pci 0000:00:19.0: Adding to iommu group 3 > [ 0.488619] pci 0000:00:1a.0: Adding to iommu group 4 > [ 0.488630] pci 0000:00:1a.1: Adding to iommu group 4 > [ 0.488641] pci 0000:00:1a.2: Adding to iommu group 4 > [ 0.488655] pci 0000:00:1a.7: Adding to iommu group 4 > [ 0.488680] pci 0000:00:1c.0: Adding to iommu group 5 > [ 0.488692] pci 0000:00:1c.4: Adding to iommu group 5 > [ 0.488719] pci 0000:00:1d.0: Adding to iommu group 6 > [ 0.488731] pci 0000:00:1d.1: Adding to iommu group 6 > [ 0.488743] pci 0000:00:1d.2: Adding to iommu group 6 > [ 0.488758] pci 0000:00:1d.7: Adding to iommu group 6 > [ 0.488770] pci 0000:00:1e.0: Adding to iommu group 7 > [ 0.488794] pci 0000:00:1f.0: Adding to iommu group 8 > [ 0.488807] pci 0000:00:1f.2: Adding to iommu group 8 > [ 0.488819] pci 0000:00:1f.3: Adding to iommu group 8 > [ 0.488825] pci 0000:01:00.0: Adding to iommu group 2 > [ 0.488836] pci 0000:01:00.1: Adding to iommu group 2 > [ 0.488842] pci 0000:04:07.0: Adding to iommu group 7 > [ 0.489590] DMAR: Intel(R) Virtualization Technology for Directed I/O > [ 0.489592] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.489594] software IO TLB: mapped [mem 0x00000000bbeb0000-0x00000000bfeb0000] (64MB) > [ 0.490219] Initialise system trusted keyrings > [ 0.490234] Key type blacklist registered > [ 0.490314] workingset: timestamp_bits=36 max_order=22 bucket_order=0 > [ 0.492268] zbud: loaded > [ 0.492582] integrity: Platform Keyring initialized > [ 0.492590] integrity: Machine keyring initialized > [ 0.492592] Key type asymmetric registered > [ 0.492594] Asymmetric key parser 'x509' registered > [ 1.195809] Freeing initrd memory: 54032K > [ 1.202513] alg: self-tests for CTR-KDF (hmac(sha256)) passed > [ 1.202563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) > [ 1.202653] io scheduler mq-deadline registered > [ 1.204072] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) > [ 1.204244] pcieport 0000:00:1c.4: enabling device (0000 -> 0003) > [ 1.204456] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 1.205023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.205194] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A > [ 1.205910] Linux agpgart interface v0.103 > [ 1.206044] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. > [ 1.206436] i8042: PNP: No PS/2 controller found. > [ 1.206437] i8042: Probing ports directly. > [ 1.209185] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.209192] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.209365] mousedev: PS/2 mouse device common for all mice > [ 1.209405] rtc_cmos 00:01: RTC can wake from S4 > [ 1.209686] rtc_cmos 00:01: registered as rtc0 > [ 1.209722] rtc_cmos 00:01: setting system clock to 2025-06-09T08:47:36 UTC (1749458856) > [ 1.209759] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 1.209852] intel_pstate: CPU model not supported > [ 1.209927] ledtrig-cpu: registered to indicate activity on CPUs > [ 1.210299] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 > [ 1.210301] vesafb: scrolling: redraw > [ 1.210302] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 1.210320] vesafb: framebuffer at 0xdf000000, mapped to 0x(____ptrval____), using 8128k, total 8128k > [ 1.210449] Console: switching to colour frame buffer device 240x67 > [ 1.261006] fb0: VESA VGA frame buffer device > [ 1.275219] IPv6: Loaded, but administratively disabled, reboot required to enable > [ 1.275225] mip6: Mobile IPv6 > [ 1.275227] mip6: mip6_init: can't add xfrm type(destopt) > [ 1.275237] NET: Registered PF_PACKET protocol family > [ 1.275324] mpls_gso: MPLS GSO support > [ 1.275674] microcode: sig=0x1067a, pf=0x10, revision=0xa07 > [ 1.275697] microcode: Microcode Update Driver: v2.2. > [ 1.275710] IPI shorthand broadcast: enabled > [ 1.275743] sched_clock: Marking stable (1275330787, 223888)->(1376007221, -100452546) > [ 1.276030] registered taskstats version 1 > [ 1.276042] Loading compiled-in X.509 certificates > [ 1.304683] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' > [ 1.304705] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' > [ 1.305210] zswap: loaded using pool lzo/zbud > [ 1.305462] Key type .fscrypt registered > [ 1.305464] Key type fscrypt-provisioning registered > [ 1.311144] Key type encrypted registered > [ 1.311147] AppArmor: AppArmor sha1 policy hashing enabled > [ 1.311160] ima: No TPM chip found, activating TPM-bypass! > [ 1.311162] ima: Allocated hash algorithm: sha256 > [ 1.311175] ima: No architecture policies found > [ 1.311197] evm: Initialising EVM extended attributes: > [ 1.311198] evm: security.selinux > [ 1.311200] evm: security.SMACK64 (disabled) > [ 1.311201] evm: security.SMACK64EXEC (disabled) > [ 1.311202] evm: security.SMACK64TRANSMUTE (disabled) > [ 1.311203] evm: security.SMACK64MMAP (disabled) > [ 1.311204] evm: security.apparmor > [ 1.311205] evm: security.ima > [ 1.311206] evm: security.capability > [ 1.311207] evm: HMAC attrs: 0x1 > [ 1.466737] clk: Disabling unused clocks > [ 1.468494] Freeing unused decrypted memory: 2036K > [ 1.469507] Freeing unused kernel image (initmem) memory: 2800K > [ 1.469566] Write protecting the kernel read-only data: 26624k > [ 1.470543] Freeing unused kernel image (text/rodata gap) memory: 2040K > [ 1.471068] Freeing unused kernel image (rodata/data gap) memory: 1144K > [ 1.516250] tsc: Refined TSC clocksource calibration: 2833.288 MHz > [ 1.516260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28d716a0116, max_idle_ns: 440795224731 ns > [ 1.518478] x86/mm: Checked W+X mappings: passed, no W+X pages found. > [ 1.518495] clocksource: Switched to clocksource tsc > [ 1.518521] x86/mm: Checking user space page tables > [ 1.563628] x86/mm: Checked W+X mappings: passed, no W+X pages found. > [ 1.563635] Run /init as init process > [ 1.563637] with arguments: > [ 1.563639] /init > [ 1.563640] with environment: > [ 1.563641] HOME=/ > [ 1.563643] TERM=linux > [ 1.563644] BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64 > [ 1.804715] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 > [ 1.804759] ACPI: button: Power Button [PWRB] > [ 1.804848] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > [ 1.821775] e100: Intel(R) PRO/100 Network Driver > [ 1.821781] e100: Copyright(c) 1999-2006 Intel Corporation > [ 1.839540] ACPI: bus type USB registered > [ 1.839575] usbcore: registered new interface driver usbfs > [ 1.839589] usbcore: registered new interface driver hub > [ 1.839605] usbcore: registered new device driver usb > [ 1.847232] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 1.847240] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > [ 1.847248] uhci_hcd 0000:00:1a.0: detected 2 ports > [ 1.847285] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00001840 > [ 1.847362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.847365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.847367] usb usb1: Product: UHCI Host Controller > [ 1.847369] usb usb1: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.847370] usb usb1: SerialNumber: 0000:00:1a.0 > [ 1.847528] ACPI: button: Power Button [PWRF] > [ 1.848876] e100 0000:04:07.0 eth0: addr 0xfd500000, irq 21, MAC addr 00:90:27:4d:8f:ca > [ 1.850195] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001028-0x000000000000102B (\_SB.PCI0.LPC.GPE0) (20220331/utaddress-204) > [ 1.850202] ACPI: OSL: Resource conflict; ACPI support missing from driver? > [ 1.850205] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x000000000000118D (\_SB.PCI0.LPC.GPE1) (20220331/utaddress-204) > [ 1.850209] ACPI: OSL: Resource conflict; ACPI support missing from driver? > [ 1.850241] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 1.850826] hub 1-0:1.0: USB hub found > [ 1.850840] hub 1-0:1.0: 2 ports detected > [ 1.851157] ehci-pci 0000:00:1a.7: EHCI Host Controller > [ 1.851165] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2 > [ 1.851180] ehci-pci 0000:00:1a.7: debug port 1 > [ 1.855133] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfd428000 > [ 1.855169] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) > [ 1.855334] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt > [ 1.855395] i2c i2c-0: 4/4 memory slots populated (from DMI) > [ 1.856337] i2c i2c-0: Successfully instantiated SPD at 0x50 > [ 1.857239] i2c i2c-0: Successfully instantiated SPD at 0x51 > [ 1.857541] i2c i2c-0: Successfully instantiated SPD at 0x52 > [ 1.857838] i2c i2c-0: Successfully instantiated SPD at 0x53 > [ 1.861525] e1000e: Intel(R) PRO/1000 Network Driver > [ 1.861529] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > [ 1.861748] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > [ 1.866730] SCSI subsystem initialized > [ 1.872249] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 1.872315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 > [ 1.872318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.872321] usb usb2: Product: EHCI Host Controller > [ 1.872322] usb usb2: Manufacturer: Linux 6.1.0-37-amd64 ehci_hcd > [ 1.872324] usb usb2: SerialNumber: 0000:00:1a.7 > [ 1.872496] hub 2-0:1.0: USB hub found > [ 1.872505] hub 2-0:1.0: 6 ports detected > [ 1.895840] libata version 3.00 loaded. > [ 1.899014] e100 0000:04:07.0 eth1: renamed from eth0 > [ 1.900567] ahci 0000:00:1f.2: version 3.0 > [ 1.900851] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode > [ 1.900855] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part > [ 1.901768] scsi host0: ahci > [ 1.901986] scsi host1: ahci > [ 1.902167] scsi host2: ahci > [ 1.902341] scsi host3: ahci > [ 1.902509] scsi host4: ahci > [ 1.902699] scsi host5: ahci > [ 1.902763] ata1: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a100 irq 32 > [ 1.902766] ata2: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a180 irq 32 > [ 1.902769] ata3: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a200 irq 32 > [ 1.902771] ata4: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a280 irq 32 > [ 1.902774] ata5: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a300 irq 32 > [ 1.902776] ata6: SATA max UDMA/133 abar m2048@0xfd42a000 port 0xfd42a380 irq 32 > [ 1.904319] hub 1-0:1.0: USB hub found > [ 1.904329] hub 1-0:1.0: 2 ports detected > [ 1.904611] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 1.904619] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 > [ 1.904626] uhci_hcd 0000:00:1a.1: detected 2 ports > [ 1.904647] uhci_hcd 0000:00:1a.1: irq 18, io port 0x00001860 > [ 1.904724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.904727] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.904730] usb usb3: Product: UHCI Host Controller > [ 1.904731] usb usb3: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.904732] usb usb3: SerialNumber: 0000:00:1a.1 > [ 1.904873] hub 3-0:1.0: USB hub found > [ 1.904881] hub 3-0:1.0: 2 ports detected > [ 1.905128] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 1.905134] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 > [ 1.905140] uhci_hcd 0000:00:1a.2: detected 2 ports > [ 1.905159] uhci_hcd 0000:00:1a.2: irq 19, io port 0x00001880 > [ 1.905219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.905222] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.905224] usb usb4: Product: UHCI Host Controller > [ 1.905226] usb usb4: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.905227] usb usb4: SerialNumber: 0000:00:1a.2 > [ 1.905350] hub 4-0:1.0: USB hub found > [ 1.905358] hub 4-0:1.0: 2 ports detected > [ 1.905602] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 1.905608] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > [ 1.905614] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 1.905632] uhci_hcd 0000:00:1d.0: irq 20, io port 0x000018a0 > [ 1.905713] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.905716] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.905718] usb usb5: Product: UHCI Host Controller > [ 1.905720] usb usb5: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.905721] usb usb5: SerialNumber: 0000:00:1d.0 > [ 1.905839] hub 5-0:1.0: USB hub found > [ 1.905847] hub 5-0:1.0: 2 ports detected > [ 1.906094] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 1.906100] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > [ 1.906106] uhci_hcd 0000:00:1d.1: detected 2 ports > [ 1.906133] uhci_hcd 0000:00:1d.1: irq 22, io port 0x000018c0 > [ 1.906193] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.906196] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.906198] usb usb6: Product: UHCI Host Controller > [ 1.906199] usb usb6: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.906201] usb usb6: SerialNumber: 0000:00:1d.1 > [ 1.906327] hub 6-0:1.0: USB hub found > [ 1.906336] hub 6-0:1.0: 2 ports detected > [ 1.906580] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 1.906590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > [ 1.906596] uhci_hcd 0000:00:1d.2: detected 2 ports > [ 1.906625] uhci_hcd 0000:00:1d.2: irq 21, io port 0x000018e0 > [ 1.906685] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 > [ 1.906688] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.906690] usb usb7: Product: UHCI Host Controller > [ 1.906692] usb usb7: Manufacturer: Linux 6.1.0-37-amd64 uhci_hcd > [ 1.906693] usb usb7: SerialNumber: 0000:00:1d.2 > [ 1.906811] hub 7-0:1.0: USB hub found > [ 1.906819] hub 7-0:1.0: 2 ports detected > [ 1.907280] ehci-pci 0000:00:1d.7: EHCI Host Controller > [ 1.907286] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 > [ 1.907298] ehci-pci 0000:00:1d.7: debug port 1 > [ 1.911203] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfd429000 > [ 1.928239] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 1.928313] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 > [ 1.928318] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.928321] usb usb8: Product: EHCI Host Controller > [ 1.928323] usb usb8: Manufacturer: Linux 6.1.0-37-amd64 ehci_hcd > [ 1.928325] usb usb8: SerialNumber: 0000:00:1d.7 > [ 1.928481] hub 8-0:1.0: USB hub found > [ 1.928490] hub 8-0:1.0: 6 ports detected > [ 1.956313] hub 5-0:1.0: USB hub found > [ 1.956328] hub 5-0:1.0: 2 ports detected > [ 1.984302] hub 6-0:1.0: USB hub found > [ 1.984317] hub 6-0:1.0: 2 ports detected > [ 2.012280] hub 7-0:1.0: USB hub found > [ 2.012288] hub 7-0:1.0: 2 ports detected > [ 2.029744] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:19:99:7a:98:cb > [ 2.029747] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection > [ 2.029794] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF > [ 2.214645] ata6: SATA link down (SStatus 0 SControl 300) > [ 2.214671] ata5: SATA link down (SStatus 0 SControl 300) > [ 2.214699] ata4: SATA link down (SStatus 0 SControl 300) > [ 2.214726] ata3: SATA link down (SStatus 0 SControl 300) > [ 2.336239] usb 1-1: new full-speed USB device number 2 using uhci_hcd > [ 2.376248] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.376274] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.376526] ata1.00: supports DRM functions and may not be fully accessible > [ 2.376528] ata1.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT02B6Q, max UDMA/133 > [ 2.377291] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA > [ 2.377870] ata2.00: ATAPI: Optiarc DVD RW AD-7230S, 1.83, max UDMA/100 > [ 2.379357] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv > [ 2.379686] ata1.00: supports DRM functions and may not be fully accessible > [ 2.379768] ata2.00: configured for UDMA/100 > [ 2.382493] ata1.00: configured for UDMA/133 > [ 2.382667] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 > [ 2.384353] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7230S 1.83 PQ: 0 ANSI: 5 > [ 2.509781] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray > [ 2.509789] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 2.533879] usb 1-1: New USB device found, idVendor=1d57, idProduct=ad03, bcdDevice= 4.07 > [ 2.533888] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 2.533890] usb 1-1: Product: Gaming Mouse > [ 2.533892] usb 1-1: Manufacturer: SOAI > [ 2.534019] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) > [ 2.534041] sd 0:0:0:0: [sda] Write Protect is off > [ 2.534044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.534076] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 2.534132] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes > [ 2.535365] sda: sda1 sda2 sda3 > [ 2.536206] sd 0:0:0:0: [sda] supports TCG Opal > [ 2.536209] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.547292] hid: raw HID events driver (C) Jiri Kosina > [ 2.555622] usbcore: registered new interface driver usbhid > [ 2.555625] usbhid: USB HID core driver > [ 2.557752] input: SOAI Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/0003:1D57:AD03.0001/input/input5 > [ 2.565207] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 2.676318] hid-generic 0003:1D57:AD03.0001: input,hidraw0: USB HID v1.10 Keyboard [SOAI Gaming Mouse] on usb-0000:00:1a.0-1/input0 > [ 2.676747] input: SOAI Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/0003:1D57:AD03.0002/input/input6 > [ 2.676837] input: SOAI Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/0003:1D57:AD03.0002/input/input7 > [ 2.736296] input: SOAI Gaming Mouse System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/0003:1D57:AD03.0002/input/input8 > [ 2.736353] hid-generic 0003:1D57:AD03.0002: input,hidraw1: USB HID v1.10 Mouse [SOAI Gaming Mouse] on usb-0000:00:1a.0-1/input1 > [ 3.296243] usb 1-2: new low-speed USB device number 3 using uhci_hcd > [ 3.495269] usb 1-2: New USB device found, idVendor=0bf8, idProduct=100c, bcdDevice= 0.01 > [ 3.495273] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0 > [ 3.495276] usb 1-2: Product: FSC KBPC PX > [ 3.495277] usb 1-2: Manufacturer: Fujitsu Siemens Computers GmbH > [ 3.508241] random: crng init done > [ 3.530723] input: Fujitsu Siemens Computers GmbH FSC KBPC PX as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/0003:0BF8:100C.0003/input/input9 > [ 3.585104] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. > [ 3.585146] device-mapper: uevent: version 1.0.3 > [ 3.585253] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com > [ 3.668573] hid-generic 0003:0BF8:100C.0003: input,hidraw2: USB HID v1.10 Keyboard [Fujitsu Siemens Computers GmbH FSC KBPC PX ] on usb-0000:00:1a.0-2/input0 > [ 3.686797] input: Fujitsu Siemens Computers GmbH FSC KBPC PX System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.1/0003:0BF8:100C.0004/input/input10 > [ 3.744301] input: Fujitsu Siemens Computers GmbH FSC KBPC PX Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.1/0003:0BF8:100C.0004/input/input11 > [ 3.744370] hid-generic 0003:0BF8:100C.0004: input,hidraw3: USB HID v1.10 Device [Fujitsu Siemens Computers GmbH FSC KBPC PX ] on usb-0000:00:1a.0-2/input1 > [ 4.228238] raid6: sse2x4 gen() 10902 MB/s > [ 4.296241] raid6: sse2x2 gen() 10628 MB/s > [ 4.364240] raid6: sse2x1 gen() 9087 MB/s > [ 4.364242] raid6: using algorithm sse2x4 gen() 10902 MB/s > [ 4.432239] raid6: .... xor() 4460 MB/s, rmw enabled > [ 4.432242] raid6: using ssse3x2 recovery algorithm > [ 4.433138] xor: measuring software checksum speed > [ 4.433355] prefetch64-sse : 15292 MB/sec > [ 4.433608] generic_sse : 13063 MB/sec > [ 4.433609] xor: using function: prefetch64-sse (15292 MB/sec) > [ 4.589667] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes > [ 5.049688] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. > [ 5.133536] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. > [ 5.243231] systemd [1]: Inserted module 'autofs4' > [ 5.264419] systemd [1]: systemd 254.26-1~bpo12+1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) > [ 5.264430] systemd [1]: Detected architecture x86-64. > [ 5.267118] systemd [1]: Hostname set to <pc14>. > [ 5.541602] systemd [1]: Queued start job for default target graphical.target. > [ 5.573310] systemd [1]: Created slice machine.slice - Virtual Machine and Container Slice. > [ 5.574101] systemd [1]: Created slice system-getty.slice - Slice /system/getty. > [ 5.574531] systemd [1]: Created slice system-modprobe.slice - Slice /system/modprobe. > [ 5.574972] systemd [1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. > [ 5.575411] systemd [1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. > [ 5.575755] systemd [1]: Created slice user.slice - User and Session Slice. > [ 5.575848] systemd [1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. > [ 5.576092] systemd [1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. > [ 5.576125] systemd [1]: Expecting device dev-disk-by\x2duuid-352fd456\x2d8f2a\x2d4055\x2d8a2a\x2d695ba99cfcfe.device - /dev/disk/by-uuid/352fd456-8f2a-4055-8a2a-695ba99cfcfe... > [ 5.576139] systemd [1]: Expecting device dev-mapper-cryptswap1.device - /dev/mapper/cryptswap1... > [ 5.576154] systemd [1]: Expecting device dev-vg0-home.device - /dev/vg0/home... > [ 5.576198] systemd [1]: Reached target integritysetup.target - Local Integrity Protected Volumes. > [ 5.576256] systemd [1]: Reached target remote-fs.target - Remote File Systems. > [ 5.576279] systemd [1]: Reached target slices.target - Slice Units. > [ 5.576312] systemd [1]: Reached target stunnel.target - TLS tunnels for network services - per-config-file target. > [ 5.576344] systemd [1]: Reached target veritysetup.target - Local Verity Protected Volumes. > [ 5.576369] systemd [1]: Reached target virt-guest-shutdown.target - Libvirt guests shutdown. > [ 5.576472] systemd [1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. > [ 5.577215] systemd [1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. > [ 5.578436] systemd [1]: Listening on syslog.socket - Syslog Socket. > [ 5.578566] systemd [1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. > [ 5.578728] systemd [1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). > [ 5.578914] systemd [1]: Listening on systemd-journald.socket - Journal Socket. > [ 5.579661] systemd [1]: Listening on systemd-udevd-control.socket - udev Control Socket. > [ 5.579891] systemd [1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. > [ 5.581278] systemd [1]: Mounting dev-hugepages.mount - Huge Pages File System... > [ 5.582503] systemd [1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... > [ 5.583869] systemd [1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... > [ 5.585311] systemd [1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... > [ 5.585585] systemd [1]: Finished blk-availability.service - Availability of block devices. > [ 5.588061] systemd [1]: Starting keyboard-setup.service - Set the console keyboard layout... > [ 5.589649] systemd [1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... > [ 5.591133] systemd [1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... > [ 5.592833] systemd [1]: Starting modprobe@configfs.service - Load Kernel Module configfs... > [ 5.594501] systemd [1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... > [ 5.596112] systemd [1]: Starting modprobe@drm.service - Load Kernel Module drm... > [ 5.597925] systemd [1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... > [ 5.599780] systemd [1]: Starting modprobe@fuse.service - Load Kernel Module fuse... > [ 5.601465] systemd [1]: Starting modprobe@loop.service - Load Kernel Module loop... > [ 5.601707] systemd [1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). > [ 5.604509] systemd [1]: Starting systemd-journald.service - Journal Service... > [ 5.611269] systemd [1]: Starting systemd-modules-load.service - Load Kernel Modules... > [ 5.611335] systemd [1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). > [ 5.618368] loop: module loaded > [ 5.621730] fuse: init (API version 7.38) > [ 5.623924] systemd [1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... > [ 5.626420] systemd-journald [362]: Collecting audit messages is disabled. > [ 5.627436] systemd [1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... > [ 5.631264] systemd [1]: Mounted dev-hugepages.mount - Huge Pages File System. > [ 5.631633] systemd [1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. > [ 5.632006] systemd [1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. > [ 5.632289] systemd [1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. > [ 5.633028] systemd [1]: Finished keyboard-setup.service - Set the console keyboard layout. > [ 5.633722] systemd [1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. > [ 5.634390] systemd [1]: modprobe@configfs.service: Deactivated successfully. > [ 5.634720] systemd [1]: Finished modprobe@configfs.service - Load Kernel Module configfs. > [ 5.635273] systemd [1]: modprobe@dm_mod.service: Deactivated successfully. > [ 5.635482] systemd [1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. > [ 5.636008] systemd [1]: modprobe@efi_pstore.service: Deactivated successfully. > [ 5.636213] systemd [1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. > [ 5.636818] systemd [1]: modprobe@fuse.service: Deactivated successfully. > [ 5.637893] systemd [1]: Finished modprobe@fuse.service - Load Kernel Module fuse. > [ 5.638327] systemd [1]: modprobe@loop.service: Deactivated successfully. > [ 5.638543] systemd [1]: Finished modprobe@loop.service - Load Kernel Module loop. > [ 5.641352] systemd [1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... > [ 5.646001] systemd [1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... > [ 5.650661] systemd [1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. > [ 5.652704] systemd [1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... > [ 5.653024] ACPI: bus type drm_connector registered > [ 5.654470] systemd [1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. > [ 5.656205] systemd [1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. > [ 5.659251] systemd [1]: modprobe@drm.service: Deactivated successfully. > [ 5.660429] systemd [1]: Finished modprobe@drm.service - Load Kernel Module drm. > [ 5.660998] systemd [1]: Finished systemd-modules-load.service - Load Kernel Modules. > [ 5.662784] systemd [1]: Starting systemd-sysctl.service - Apply Kernel Variables... > [ 5.671664] EXT4-fs (sda2): re-mounted. Quota mode: none. > [ 5.674687] systemd [1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. > [ 5.676451] systemd [1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). > [ 5.676517] systemd [1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). > [ 5.678085] systemd [1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... > [ 5.691857] systemd [1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. > [ 5.692314] systemd [1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. > [ 5.693709] systemd [1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... > [ 5.696492] systemd [1]: Finished systemd-sysctl.service - Apply Kernel Variables. > [ 5.701306] systemd [1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. > [ 5.709402] systemd [1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. > [ 5.711192] systemd [1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... > [ 5.719827] systemd [1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. > [ 5.720274] systemd [1]: Reached target local-fs-pre.target - Preparation for Local File Systems. > [ 5.720362] systemd [1]: var-lib-machines.mount - Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw). > [ 5.720396] systemd [1]: Reached target machines.target - Containers. > [ 5.737692] systemd [1]: Started systemd-journald.service - Journal Service. > [ 5.748370] systemd-journald [362]: Received client request to flush runtime journal. > [ 5.763517] systemd-journald [362]: /var/log/journal/94aa7b96c9e6429dac833d912f69ab20/system.journal: Journal file uses a different sequence number ID, rotating. > [ 5.763527] systemd-journald [362]: Rotating system journal. > [ 5.985449] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 6.017640] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 6.197666] parport_pc 00:04: reported by Plug and Play ACPI > [ 6.207173] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > [ 6.217194] at24 0-0050: supply vcc not found, using dummy regulator > [ 6.227768] at24 0-0050: 256 byte spd EEPROM, read-only > [ 6.232897] at24 0-0051: supply vcc not found, using dummy regulator > [ 6.234983] iTCO_vendor_support: vendor-support=0 > [ 6.251436] at24 0-0051: 256 byte spd EEPROM, read-only > [ 6.252016] at24 0-0052: supply vcc not found, using dummy regulator > [ 6.276998] at24 0-0052: 256 byte spd EEPROM, read-only > [ 6.280671] at24 0-0053: supply vcc not found, using dummy regulator > [ 6.331411] at24 0-0053: 256 byte spd EEPROM, read-only > [ 6.333197] iTCO_wdt iTCO_wdt.1.auto: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060) > [ 6.334937] snd_hda_intel 0000:01:00.1: Disabling MSI > [ 6.334957] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client > [ 6.349489] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) > [ 6.480551] ppdev: user-space parallel port driver > [ 6.490044] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 > [ 6.490116] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 > [ 6.490171] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 > [ 6.490228] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 > [ 6.504222] nvidia: loading out-of-tree module taints kernel. > [ 6.504280] nvidia: module license 'NVIDIA' taints kernel. > [ 6.504283] Disabling lock debugging due to kernel taint > [ 6.505640] intel_powerclamp: No package C-state available > [ 6.604667] nvidia: module verification failed: signature and/or required key missing - tainting kernel > [ 6.612903] cryptd: max_cpu_qlen set to 1000 > [ 6.718064] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. > [ 6.795570] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 > [ 6.797900] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem > [ 6.913976] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.146.02 Sun Dec 3 14:06:14 UTC 2023 > [ 6.952249] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 535.146.02 Sun Dec 3 14:02:44 UTC 2023 > [ 6.972168] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver > [ 6.972174] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 > [ 7.135538] Adding 2096636k swap on /dev/mapper/cryptswap1. Priority:-2 extents:1 across:2096636k SSFS > [ 7.189542] audit: type=1400 audit(1749458862.476:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=602 comm="apparmor_parser" > [ 7.191769] audit: type=1400 audit(1749458862.476:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=603 comm="apparmor_parser" > [ 7.194567] audit: type=1400 audit(1749458862.480:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=604 comm="apparmor_parser" > [ 7.194572] audit: type=1400 audit(1749458862.480:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=604 comm="apparmor_parser" > [ 7.198153] audit: type=1400 audit(1749458862.484:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=609 comm="apparmor_parser" > [ 7.198159] audit: type=1400 audit(1749458862.484:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=609 comm="apparmor_parser" > [ 7.198162] audit: type=1400 audit(1749458862.484:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=609 comm="apparmor_parser" > [ 7.199511] audit: type=1400 audit(1749458862.484:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=605 comm="apparmor_parser" > [ 7.199518] audit: type=1400 audit(1749458862.484:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=605 comm="apparmor_parser" > [ 7.199521] audit: type=1400 audit(1749458862.484:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=605 comm="apparmor_parser" > [ 7.336419] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000 > [ 7.512358] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. > [ 7.554046] NET: Registered PF_QIPCRTR protocol family > [ 8.344240] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x300f0000 > [ 8.530922] br0: port 1(eth0) entered blocking state > [ 8.530929] br0: port 1(eth0) entered disabled state > [ 8.531007] device eth0 entered promiscuous mode > [ 9.352241] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it... > [ 9.383700] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC663: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line > [ 9.383713] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) > [ 9.383715] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) > [ 9.383718] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 > [ 9.383719] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 > [ 9.383721] snd_hda_codec_realtek hdaudioC0D2: inputs: > [ 9.383723] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 > [ 9.383725] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 > [ 9.383727] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a > [ 9.398758] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 > [ 9.399854] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 > [ 9.399944] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 > [ 9.400295] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 > [ 9.401479] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 > [ 11.013112] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx > [ 11.013265] br0: port 1(eth0) entered blocking state > [ 11.013274] br0: port 1(eth0) entered forwarding state > [ 11.949606] br1: port 1(eth1) entered blocking state > [ 11.949610] br1: port 1(eth1) entered disabled state > [ 11.949686] device eth1 entered promiscuous mode > [ 11.976501] e100 0000:04:07.0 eth1: NIC Link is Up 100 Mbps Full Duplex > [ 11.977466] br1: port 1(eth1) entered blocking state > [ 11.977470] br1: port 1(eth1) entered forwarding state > [ 12.352416] systemd-journald [362]: Time jumped backwards, rotating. > [ 297.841137] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint. > [ 297.902871] nvidia-uvm: Loaded the UVM driver, major device number 241. Can you reproduce the problem without the nvidia module? Does the problem happen always when you insert a DVD RAM? Does the hang generate more dmesg output? Best regards Uwe
Attachment:
signature.asc
Description: PGP signature