[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1029684: marked as done (linux-5.10.0-21-marvell (armv5tel) -> WARNING: CPU: 0 at include/linux/msi.h:219)

Your message dated Thu, 20 Feb 2025 15:14:43 +0100 (CET)
with message-id <20250220141443.C2C23BE2EE7@eldamar.lan>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #1029684,
regarding linux-5.10.0-21-marvell (armv5tel) -> WARNING: CPU: 0 at include/linux/msi.h:219
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1029684: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1029684
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 5.10.162-1
Severity: normal


Dear Maintainer,
after installtion of Debian bullsey on QNAP TS-420U the server is booting with a strange warning:
  WARNING: CPU: 0 PID: 230 at include/linux/msi.h:219  (see output of dmesg below). 

It looks like the system is running fine.
However, even if this warning could savely be ignored, the warning (and following lines) looks like a serious problem. 
Therefore I'm not sure if this is a bug nor not.


-- Package-specific info:
** Version:
Linux version 5.10.0-21-marvell (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Debian 5.10.162-1 (2023-01-21) 


** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xb00000,0xc00000 ramdisk=34816 mem=768M cmdlinepart.mtdparts=spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot_Config),256k@0xc0000(NAS_Config) mtdparts=spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot_Config),256k@0xc0000(NAS_Config) 


** Tainted: W (512)
 * kernel issued warning


** Output of dmesg:
...
[   14.474034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.487761] ------------[ cut here ]------------
[   14.492437] WARNING: CPU: 0 PID: 238 at include/linux/msi.h:219 pci_msi_setup_msi_irqs+0x60/0x70 [   14.501285] Modules linked in: ehci_hcd(+) libdes libaes orion_wdt(+) watchdog xhci_pci(+) xhci_hcd spi_orion kirkwood_thermal sg usbcore usb_common nls_base evdev gpio_keys fuse configfs ip_tables x_tables hmac ipv6 autofs4 ext4 crc16 mbcache jbd2 raid10 raid0 multipath linear raid456 libcrc32c crc32c_generic async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 md_mod sd_mod t10_pi crc_t10dif crct10dif_generic crct10dif_common sata_mv libata rtc_s35390a scsi_mod [   14.544822] CPU: 0 PID: 238 Comm: systemd-udevd Not tainted 5.10.0-21-marvell #1 Debian 5.10.162-1 
[   14.553833] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[   14.560159] [<c0014bd4>] (unwind_backtrace) from [<c0011a54>] (show_stack+0x18/0x1c) [   14.567960] [<c0011a54>] (show_stack) from [<c001f65c>] (__warn+0xc4/0xf0) [   14.574890] [<c001f65c>] (__warn) from [<c04a6c70>] (warn_slowpath_fmt+0x70/0x90) [   14.582426] [<c04a6c70>] (warn_slowpath_fmt) from [<c02ff2b8>] (pci_msi_setup_msi_irqs+0x60/0x70) [   14.591363] [<c02ff2b8>] (pci_msi_setup_msi_irqs) from [<c02ffc5c>] (__pci_enable_msi_range+0x240/0x334) [   14.600911] [<c02ffc5c>] (__pci_enable_msi_range) from [<c02ffe34>] (pci_alloc_irq_vectors_affinity+0xc0/0x104) [   14.611145] [<c02ffe34>] (pci_alloc_irq_vectors_affinity) from [<bf513fd0>] (xhci_run+0x16c/0x484 [xhci_hcd]) [   14.621269] [<bf513fd0>] (xhci_run [xhci_hcd]) from [<bf4b71d4>] (usb_add_hcd+0x444/0x618 [usbcore]) [   14.630578] [<bf4b71d4>] (usb_add_hcd [usbcore]) from [<bf4c6700>] (usb_hcd_pci_probe+0x32c/0x39c [usbcore]) [   14.640536] [<bf4c6700>] (usb_hcd_pci_probe [usbcore]) from [<bf55099c>] (xhci_pci_probe+0x18/0xf4 [xhci_pci]) [   14.650622] [<bf55099c>] (xhci_pci_probe [xhci_pci]) from [<c02f16b0>] (pci_device_probe+0x84/0xf4) [   14.659729] [<c02f16b0>] (pci_device_probe) from [<c033b9f4>] (really_probe+0x274/0x488) [   14.667880] [<c033b9f4>] (really_probe) from [<c033c134>] (device_driver_attach+0x4c/0x64) [   14.676198] [<c033c134>] (device_driver_attach) from [<c033c1d4>] (__driver_attach+0x88/0x13c) [   14.684864] [<c033c1d4>] (__driver_attach) from [<c0339bac>] (bus_for_each_dev+0x5c/0x80) [   14.693096] [<c0339bac>] (bus_for_each_dev) from [<c033aba0>] (bus_add_driver+0xd4/0x1f0) [   14.701329] [<c033aba0>] (bus_add_driver) from [<c033c818>] (driver_register+0xb4/0xf8) [   14.709387] [<c033c818>] (driver_register) from [<c0009df4>] (do_one_initcall+0x64/0x1a4) [   14.717621] [<c0009df4>] (do_one_initcall) from [<c007c878>] (do_init_module+0x44/0x1e0) [   14.725772] [<c007c878>] (do_init_module) from [<c007ef3c>] (sys_finit_module+0xbc/0xd0) [   14.733915] [<c007ef3c>] (sys_finit_module) from [<c0008404>] (__sys_trace_return+0x0/0x1c) 
[   14.742313] Exception stack(0xc29b7fa8 to 0xc29b7ff0)
[   14.747401] 7fa0: b6fa513c 00d592e0 00000012 b6fa3f38 00000000 b6fa4cb0
[   14.755636] 7fc0: b6fa513c 00d592e0 7c66f200 0000017b 00d3f620 00593227 00593298 00d592e0 
[   14.763862] 7fe0: be9936f0 be9936e0 b6f9bc64 b6e40160
[   14.768943] ---[ end trace b3c77c9a5fdd87b6 ]---
[   14.773591] ------------[ cut here ]------------
[   14.778246] WARNING: CPU: 0 PID: 238 at include/linux/msi.h:225 free_msi_irqs+0x17c/0x18c [   14.786468] Modules linked in: ehci_hcd(+) libdes libaes orion_wdt(+) watchdog xhci_pci(+) xhci_hcd spi_orion kirkwood_thermal sg usbcore usb_common nls_base evdev gpio_keys fuse configfs ip_tables x_tables hmac ipv6 autofs4 ext4 crc16 mbcache jbd2 raid10 raid0 multipath linear raid456 libcrc32c crc32c_generic async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 md_mod sd_mod t10_pi crc_t10dif crct10dif_generic crct10dif_common sata_mv libata rtc_s35390a scsi_mod [   14.829979] CPU: 0 PID: 238 Comm: systemd-udevd Tainted: G        W         5.10.0-21-marvell #1 Debian 5.10.162-1 
[   14.840385] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[   14.846701] [<c0014bd4>] (unwind_backtrace) from [<c0011a54>] (show_stack+0x18/0x1c) [   14.854497] [<c0011a54>] (show_stack) from [<c001f65c>] (__warn+0xc4/0xf0) [   14.861423] [<c001f65c>] (__warn) from [<c04a6c70>] (warn_slowpath_fmt+0x70/0x90) [   14.868964] [<c04a6c70>] (warn_slowpath_fmt) from [<c02ff248>] (free_msi_irqs+0x17c/0x18c) [   14.877292] [<c02ff248>] (free_msi_irqs) from [<c02ffc7c>] (__pci_enable_msi_range+0x260/0x334) [   14.886055] [<c02ffc7c>] (__pci_enable_msi_range) from [<c02ffe34>] (pci_alloc_irq_vectors_affinity+0xc0/0x104) [   14.896270] [<c02ffe34>] (pci_alloc_irq_vectors_affinity) from [<bf513fd0>] (xhci_run+0x16c/0x484 [xhci_hcd]) [   14.906359] [<bf513fd0>] (xhci_run [xhci_hcd]) from [<bf4b71d4>] (usb_add_hcd+0x444/0x618 [usbcore]) [   14.915662] [<bf4b71d4>] (usb_add_hcd [usbcore]) from [<bf4c6700>] (usb_hcd_pci_probe+0x32c/0x39c [usbcore]) [   14.925625] [<bf4c6700>] (usb_hcd_pci_probe [usbcore]) from [<bf55099c>] (xhci_pci_probe+0x18/0xf4 [xhci_pci]) [   14.935704] [<bf55099c>] (xhci_pci_probe [xhci_pci]) from [<c02f16b0>] (pci_device_probe+0x84/0xf4) [   14.944825] [<c02f16b0>] (pci_device_probe) from [<c033b9f4>] (really_probe+0x274/0x488) [   14.952971] [<c033b9f4>] (really_probe) from [<c033c134>] (device_driver_attach+0x4c/0x64) [   14.961289] [<c033c134>] (device_driver_attach) from [<c033c1d4>] (__driver_attach+0x88/0x13c) [   14.969960] [<c033c1d4>] (__driver_attach) from [<c0339bac>] (bus_for_each_dev+0x5c/0x80) [   14.978196] [<c0339bac>] (bus_for_each_dev) from [<c033aba0>] (bus_add_driver+0xd4/0x1f0) [   14.986428] [<c033aba0>] (bus_add_driver) from [<c033c818>] (driver_register+0xb4/0xf8) [   14.994486] [<c033c818>] (driver_register) from [<c0009df4>] (do_one_initcall+0x64/0x1a4) [   15.002720] [<c0009df4>] (do_one_initcall) from [<c007c878>] (do_init_module+0x44/0x1e0) [   15.010873] [<c007c878>] (do_init_module) from [<c007ef3c>] (sys_finit_module+0xbc/0xd0) [   15.019016] [<c007ef3c>] (sys_finit_module) from [<c0008404>] (__sys_trace_return+0x0/0x1c) 
[   15.027413] Exception stack(0xc29b7fa8 to 0xc29b7ff0)
[   15.032499] 7fa0: b6fa513c 00d592e0 00000012 b6fa3f38 00000000 b6fa4cb0
[   15.040732] 7fc0: b6fa513c 00d592e0 7c66f200 0000017b 00d3f620 00593227 00593298 00d592e0 
[   15.048961] 7fe0: be9936f0 be9936e0 b6f9bc64 b6e40160
[   15.054042] ---[ end trace b3c77c9a5fdd87b7 ]---
[   15.196786] ehci-orion: EHCI orion driver


** Model information
Hardware    : Marvell Kirkwood (Flattened Device Tree)
Revision    : 0000
Device Tree model: QNAP TS419 family


** Loaded modules:
af_packet
ofpart
cmdlinepart
spi_nor
mtd
marvell
mv643xx_eth
mvmdio
ehci_orion
marvell_cesa
ehci_hcd
libdes
libaes
orion_wdt
watchdog
xhci_pci
xhci_hcd
spi_orion
kirkwood_thermal
sg
usbcore
usb_common
nls_base
evdev
gpio_keys
fuse
configfs
ip_tables
x_tables
hmac
ipv6
autofs4
ext4
crc16
mbcache
jbd2
raid10
raid0
multipath
linear
raid456
libcrc32c
crc32c_generic
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
md_mod
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
crct10dif_common
sata_mv
libata
rtc_s35390a
scsi_mod


** PCI devices:
00:01.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) (prog-if 00 [Normal decode])     Device tree node: /sys/firmware/devicetree/base/mbus@f1000000/pcie@82000000/pcie@1,0     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00010000-00010fff [size=4K]
    Memory behind bridge: e0000000-e00fffff [size=1M]
    Prefetchable memory behind bridge: 00000000-000fffff [size=1M]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited 
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 128 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- 
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
00:02.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) (prog-if 00 [Normal decode])     Device tree node: /sys/firmware/devicetree/base/mbus@f1000000/pcie@82000000/pcie@2,0     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: e0100000-e01fffff [size=1M]
    Prefetchable memory behind bridge: 00000000-000fffff [size=1M]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited 
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 128 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- 
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
01:00.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02)     Subsystem: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:11ab]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 37
    Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M]
    Region 2: I/O ports at 10000 [size=256]
    Capabilities: [40] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) 
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us 
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <256ns 
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 128 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- 
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Kernel driver in use: sata_mv
    Kernel modules: sata_mv
02:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])     Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 41
    Region 0: Memory at e0100000 (64-bit, non-prefetchable) [size=32K]
    Capabilities: [50] Power Management version 3
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) 
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] MSI: Enable- Count=1/4 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [a0] Express (v2) Endpoint, MSI 01
        DevCap:    MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W 
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us 
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- 
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, 
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- 
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- 
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         AERCap:    First Error Pointer: 14, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- 
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci


** USB devices:
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 11.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') 
Architecture: armel (armv5tel)

Kernel: Linux 5.10.0-21-marvell
Kernel taint flags: TAINT_WARN
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en 
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-21-marvell depends on:
ii  initramfs-tools [linux-initramfs-tool] 0.140
ii  kmod 28-1
ii  linux-base 4.6

Versions of packages linux-image-5.10.0-21-marvell recommends:
ii  apparmor             2.13.6-10
ii  firmware-linux-free  20200122-1
ii  u-boot-tools         2021.01+dfsg-5

Versions of packages linux-image-5.10.0-21-marvell suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-21-marvell is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: