--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.17.0-1-amd64: asus-nb-wmi module failed to probe causes multimedia keys unusable
- From: ahmadraniri <lidgnulinux@gmail.com>
- Date: Tue, 26 Apr 2022 16:38:47 +0700
- Message-id: <165096592738.5338.5224908524192830740.reportbug@lidgnulinux>
Package: src:linux
Version: 5.17.3-1
Severity: normal
X-Debbugs-Cc: lidgnulinux@gmail.com
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Asus-nb-wmi module failed to probe.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Load manually (modprobe / insmod).
* What was the outcome of this action?
I get this error : modprobe: ERROR: could not insert 'asus_nb_wmi': No such device
* What outcome did you expect instead?
Asus_nb_wmi get loaded, multimedia keys (fn+F10/F11/F12) become usable.
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 5.17.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.2.0-20) 11.2.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT Debian 5.17.3-1 (2022-04-18)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.17.0-1-amd64 root=UUID=2d3b91ab-4936-4fb1-add6-b820adbd0b6c ro
** Not tainted
** Kernel log:
[ 20.310543] input: failed to attach handler evdev to device input13, error: -2
[ 20.562469] usb 2-1.1: firmware: direct-loading firmware ath3k-1.fw
[ 20.721151] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 20.721543] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 20.750864] cryptd: max_cpu_qlen set to 1000
[ 20.810821] usbcore: registered new interface driver ath3k
[ 20.816911] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.817246] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 20.817556] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 20.817865] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.001536] usb 2-1.1: USB disconnect, device number 3
[ 21.482532] usb 2-1.1: new full-speed USB device number 5 using ehci-pci
[ 21.591592] usb 2-1.1: New USB device found, idVendor=0cf3, idProduct=3005, bcdDevice= 0.01
[ 21.591610] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.012697] i915 0000:00:02.0: [drm] Disabling ppGTT for VT-d support
[ 22.012967] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 22.012970] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 22.013516] Console: switching to colour dummy device 80x25
[ 22.013567] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'
[ 22.013588] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 22.015047] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 22.064037] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 22.064364] ACPI: video: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 22.066229] acpi device:03: registered as cooling_device4
[ 22.066300] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input14
[ 22.067057] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 22.068797] acpi device:46: registered as cooling_device5
[ 22.069000] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 22.084421] fbcon: i915drmfb (fb0) is primary device
[ 22.304059] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 22.426453] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 22.919798] Console: switching to colour frame buffer device 170x48
[ 22.939368] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 23.285061] mc: Linux media interface: v0.10
[ 23.294432] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 23.573581] videodev: Linux video capture interface: v2.00
[ 23.707417] ath: phy0: Set BT/WLAN RX diversity capability
[ 23.758093] ath: phy0: ASPM enabled: 0x42
[ 23.758098] ath: EEPROM regdomain: 0x60
[ 23.758099] ath: EEPROM indicates we should expect a direct regpair map
[ 23.758100] ath: Country alpha2 being used: 00
[ 23.758101] ath: Regpair used: 0x60
[ 23.760246] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.760894] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffad77c0740000, irq=17
[ 23.865922] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 23.963345] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 23.963364] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.963373] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 23.963379] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 23.963384] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 23.963388] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 23.963393] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 23.963398] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 24.035689] intel_rapl_common: Found RAPL domain package
[ 24.035706] intel_rapl_common: Found RAPL domain core
[ 24.035713] intel_rapl_common: Found RAPL domain uncore
[ 24.057726] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 24.057825] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 24.057922] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 24.513957] usb 2-1.2: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b1b9)
[ 24.534479] input: USB2.0 0.3M UVC WebCam: USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input19
[ 24.534821] usbcore: registered new interface driver uvcvideo
[ 57.161741] NET: Registered PF_QIPCRTR protocol family
[ 60.586277] wlp3s0: authenticate with 40:ee:15:17:9b:b4
[ 60.586327] wlp3s0: bad VHT capabilities, disabling VHT
[ 60.586334] wlp3s0: 80 MHz not supported, disabling VHT
[ 60.602695] wlp3s0: send auth to 40:ee:15:17:9b:b4 (try 1/3)
[ 60.604569] wlp3s0: authenticated
[ 60.606548] wlp3s0: associate with 40:ee:15:17:9b:b4 (try 1/3)
[ 60.610759] wlp3s0: RX AssocResp from 40:ee:15:17:9b:b4 (capab=0x411 status=0 aid=2)
[ 60.610993] wlp3s0: associated
[ 60.786819] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 120.153115] asus_wmi: Initialization: 0x1
[ 120.153164] asus_wmi: BIOS WMI version: 7.6
[ 120.153227] asus_wmi: SFUN value: 0x1a0877
[ 120.153231] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 120.153234] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 120.154815] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 120.314432] asus-nb-wmi: probe of asus-nb-wmi failed with error 2
[ 190.751143] asus_wmi: Initialization: 0x1
[ 190.751178] asus_wmi: BIOS WMI version: 7.6
[ 190.751225] asus_wmi: SFUN value: 0x1a0877
[ 190.751229] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 190.751232] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 190.752501] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
[ 190.913637] asus-nb-wmi: probe of asus-nb-wmi failed with error 2
[ 244.848207] asus_wmi: Initialization: 0x1
[ 244.848254] asus_wmi: BIOS WMI version: 7.6
[ 244.848304] asus_wmi: SFUN value: 0x1a0877
[ 244.848308] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 244.848311] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 244.850049] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input22
[ 245.009835] asus-nb-wmi: probe of asus-nb-wmi failed with error 2
[ 273.721963] asus_wmi: Initialization: 0x1
[ 273.721993] asus_wmi: BIOS WMI version: 7.6
[ 273.722035] asus_wmi: SFUN value: 0x1a0877
[ 273.722038] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 273.722041] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 273.723887] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input23
[ 273.886952] asus-nb-wmi: probe of asus-nb-wmi failed with error 2
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: U36SD
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: U36SD.203
board_vendor: ASUSTeK Computer Inc.
board_name: U36SD
board_version: 1.0
** Loaded modules:
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
ccm
qrtr
uvcvideo
videobuf2_vmalloc
videobuf2_memops
snd_hda_codec_hdmi
intel_rapl_msr
videobuf2_v4l2
snd_hda_codec_realtek
intel_rapl_common
videobuf2_common
x86_pkg_temp_thermal
snd_hda_codec_generic
ath9k
intel_powerclamp
videodev
ledtrig_audio
coretemp
snd_hda_intel
mc
snd_intel_dspcfg
ath9k_common
kvm_intel
snd_intel_sdw_acpi
ath9k_hw
snd_hda_codec
i915
ath
kvm
snd_hda_core
mac80211
snd_hwdep
irqbypass
snd_pcm
ttm
libarc4
snd_timer
ghash_clmulni_intel
drm_kms_helper
cfg80211
snd
cryptd
iTCO_wdt
intel_pmc_bxt
mei_hdcp
evdev
soundcore
iTCO_vendor_support
cec
rapl
watchdog
mei_me
intel_cstate
ath3k
joydev
rc_core
mei
sg
intel_uncore
i2c_algo_bit
serio_raw
asus_wmi
platform_profile
sparse_keymap
pcspkr
ac
button
mxm_wmi
wmi_bmof
btusb
btrtl
btbcm
btintel
binfmt_misc
btmtk
bluetooth
jitterentropy_rng
sha512_ssse3
sha512_generic
ctr
drbg
ansi_cprng
ecdh_generic
rfkill
ecc
drm
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
ahci
libahci
libata
scsi_mod
crct10dif_pclmul
crct10dif_common
i2c_i801
ehci_pci
xhci_pci
crc32_pclmul
crc32c_intel
xhci_hcd
ehci_hcd
psmouse
usbcore
i2c_smbus
scsi_common
lpc_ich
atl1c
usb_common
video
wmi
battery
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family DRAM Controller [1043:1327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: db000000-dc0fffff [size=17M]
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [1043:1682]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
IOMMU group: 2
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family MEI Controller [1043:1327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
IOMMU group: 3
Region 0: Memory at df00b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1043:1327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 4
Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller [1043:1ba3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
IOMMU group: 5
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
IOMMU group: 6
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: de600000-deffffff [size=10M]
Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
IOMMU group: 7
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff [size=4K]
Memory behind bridge: ddc00000-de5fffff [size=10M]
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
IOMMU group: 8
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff [size=4K]
Memory behind bridge: dd200000-ddbfffff [size=10M]
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 30
IOMMU group: 9
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff [size=4K]
Memory behind bridge: dc800000-dd1fffff [size=10M]
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1043:1327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
IOMMU group: 10
Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset LPC Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. HM65 Express Chipset LPC Controller [1043:1327]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 11
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [1043:1327]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
IOMMU group: 11
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family SMBus Controller [1043:1327]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
IOMMU group: 11
Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119M [GeForce GT 520M] [10de:1050] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. GF119M [GeForce GT 520M] [1043:1682]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
IOMMU group: 1
Region 0: Memory at db000000 (32-bit, non-prefetchable) [disabled] [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [disabled] [size=32M]
Region 5: I/O ports at d000 [disabled] [size=128]
Expansion ROM at dc000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nouveau
03:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NB037H 802.11bgn Wireless Half-size Mini PCIe Card [AR9002WB-1NGCD] [1a3b:2c37]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
IOMMU group: 12
Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 USB controller [0c03]: Fresco Logic FL1000G USB 3.0 Host Controller [1b73:1000] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. FL1000G USB 3.0 Host Controller [1043:1039]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 13
Region 0: Memory at dd200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
05:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: ASUSTeK Computer Inc. AR8151 v2.0 Gigabit Ethernet [1043:1851]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
IOMMU group: 14
Region 0: Memory at dc800000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 9000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam
Bus 002 Device 005: ID 0cf3:3005 Qualcomm Atheros Communications AR3011 Bluetooth
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 5.17.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.17.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.141
ii kmod 29-1
ii linux-base 4.8
Versions of packages linux-image-5.17.0-1-amd64 recommends:
ii apparmor 3.0.4-2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.17.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-2
pn linux-doc-5.17 <none>
Versions of packages linux-image-5.17.0-1-amd64 is related to:
ii firmware-amd-graphics 20210818-1
ii firmware-atheros 20210818-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210818-1
ii firmware-misc-nonfree 20210818-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---