Bug#1003900: marked as done (linux-image-5.10.0-10-amd64: After upgrade to bullseye: DMA Read .. Request device ... PASID ffffffff fault addr ... DRHD: handling fault status reg 2)

["Debian Bug Tracking System" <owner@bugs.debian.org>]

Your message dated Thu, 20 Feb 2025 14:27:08 +0100 (CET)
with message-id <20250220132708.C27EFBE2EE7@eldamar.lan>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #1003900,
regarding linux-image-5.10.0-10-amd64: After upgrade to bullseye: DMA Read .. Request device ... PASID ffffffff fault addr ... DRHD: handling fault status reg 2
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1003900: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1003900
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

• To: Debian Bug Tracking System <submit@bugs.debian.org>
• Subject: linux-image-5.10.0-10-amd64: After upgrade to bullseye: DMA Read .. Request device ... PASID ffffffff fault addr ... DRHD: handling fault status reg 2
• From: Leszek Dubiel <leszek@dubiel.pl>
• Date: Mon, 17 Jan 2022 22:00:57 +0100
• Message-id: <efe38db2-4bc5-8a0a-bc17-8a700d1925f4@dubiel.pl>

Package: src:linux
Version: 5.10.84-1
Severity: normal
X-Debbugs-Cc: leszek@dubiel.pl



After upgrading from bullseye to buster there is huge amount of errors:

[10122.779046] dmar_fault: 842 callbacks suppressed
[10122.779047] DMAR: DRHD: handling fault status reg 2

[10122.779060] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ff8ed000 [fault reason 06] PTE Read access is not set

[10122.900275] DMAR: DRHD: handling fault status reg 2

[10122.900287] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ff891000 [fault reason 06] PTE Read access is not set

[10122.923105] DMAR: DRHD: handling fault status reg 3

[10122.923118] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ff8ab000 [fault reason 06] PTE Read access is not set

[10122.926187] DMAR: DRHD: handling fault status reg 2
[10133.964234] dmar_fault: 371 callbacks suppressed




#lspci -vv:

....

05:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10)     Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 18
    IOMMU group: 14
    Region 0: I/O ports at c000 [size=256]
    Region 1: Memory at f7820000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at f7800000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: r8169
    Kernel modules: r8169




# dmesg | grep 'Read access' -C50  | head -n70

[   36.918796] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [   36.918847] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [   36.918888] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [   36.925864] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [   36.926842] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [   36.926970] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [   36.927694] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [   37.081772] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [   37.081774] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [   37.081775] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[   37.081776] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[   37.081776] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
[   37.081777] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[   37.081778] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[   37.081779] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[   37.081779] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[   37.081780] snd_hda_codec_realtek hdaudioC1D2:      CD=0x1c
[   37.081780] snd_hda_codec_realtek hdaudioC1D2:    dig-in=0x1f

[   37.097665] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [   37.097709] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [   37.098126] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [   37.098162] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [   37.098197] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [   37.098618] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0 [   37.160844] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[   37.351840] [TTM] Zone  kernel: Available graphics memory: 8134362 KiB
[   37.351842] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   37.351843] [TTM] Initializing pool allocator
[   37.351846] [TTM] Initializing DMA pool allocator
[   37.351879] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[   37.351880] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   37.351883] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   37.351884] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   37.351885] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[   37.351886] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[   37.351887] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021362 00020010
[   37.351887] nouveau 0000:01:00.0: DRM: DCB outp 04: 01032310 00000000
[   37.351888] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[   37.351889] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[   37.351890] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[   37.354114] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[   37.405377] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes

[   37.405734] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1 [   37.419720] Adding 33591616k swap on /dev/sda3.  Priority:-2 extents:1 across:33591616k FS [   37.842337] RTL8211C Gigabit Ethernet r8169-0-518:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-518:00, irq=IGNORE)

[   37.905068] r8169 0000:05:03.0 lan: Link is Down

[   40.369989] r8169 0000:05:03.0 lan: Link is Up - 1Gbps/Full - flow control rx/tx

[   40.370004] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[   47.421603] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[  185.304981] DMAR: DRHD: handling fault status reg 2

[  185.304994] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffbf8000 [fault reason 06] PTE Read access is not set

[  190.916059] DMAR: DRHD: handling fault status reg 2

[  190.916073] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffbf2000 [fault reason 06] PTE Read access is not set

[  209.147940] DMAR: DRHD: handling fault status reg 2

[  209.147949] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffbee000 [fault reason 06] PTE Read access is not set

[  209.148133] DMAR: DRHD: handling fault status reg 2

[  209.148139] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffbac000 [fault reason 06] PTE Read access is not set

[  209.148717] DMAR: DRHD: handling fault status reg 2

[  209.148722] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffbc5000 [fault reason 06] PTE Read access is not set

[  209.154362] DMAR: DRHD: handling fault status reg 2
[  249.151799] dmar_fault: 5 callbacks suppressed
[  249.151800] DMAR: DRHD: handling fault status reg 2

[  249.151809] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffb47000 [fault reason 06] PTE Read access is not set

[  249.152186] DMAR: DRHD: handling fault status reg 2

[  249.152190] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffb4f000 [fault reason 06] PTE Read access is not set

[  249.152194] DMAR: DRHD: handling fault status reg 2

[  249.152200] DMAR: [DMA Read] Request device [05:00.0] PASID ffffffff fault addr ffb98000 [fault reason 06] PTE Read access is not set

[  249.152594] DMAR: DRHD: handling fault status reg 2
[  263.199673] dmar_fault: 11 callbacks suppressed
[  263.199675] DMAR: DRHD: handling fault status reg 2




-- Package-specific info:
** Version:

Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08)

** Command line:

BOOT_IMAGE=/pegaz/boot/vmlinuz-5.10.0-10-amd64 root=UUID=0fac09ad-a5fd-4b43-b0bf-08d91655e3d8 ro rootflags=subvol=pegaz quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z87P-D3
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: FD
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z87P-D3
board_version: x.x

** Loaded modules:
nls_ascii
snd_hda_codec_realtek
snd_hda_codec_generic
nls_cp437
vfat
ledtrig_audio
fat
snd_hda_codec_hdmi
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
intel_rapl_msr
intel_rapl_common
snd_soc_core
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_compress
soundwire_cadence
snd_hda_codec
kvm_intel
nouveau
snd_hda_core
kvm
irqbypass
snd_hwdep
ghash_clmulni_intel
mxm_wmi
i915
aesni_intel
soundwire_bus
wmi
libaes
evdev
snd_pcm
mei_hdcp
ttm
crypto_simd
ppdev
cryptd
glue_helper
drm_kms_helper
iTCO_wdt
snd_timer
rapl
intel_pmc_bxt
cec
snd
intel_cstate
mei_me
intel_uncore
i2c_algo_bit
efi_pstore
soundcore
iTCO_vendor_support
pcspkr
parport_pc
sg
parport
watchdog
mei
at24
button
configfs
drm
fuse
efivarfs
ip_tables
x_tables
autofs4
btrfs
blake2b_generic
xor
raid6_pq
libcrc32c
crc32c_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
ahci
libahci
crct10dif_pclmul
crct10dif_common
libata
crc32_pclmul
xhci_pci
crc32c_intel
xhci_hcd
scsi_mod
ehci_pci
ehci_hcd
i2c_i801
lpc_ich
i2c_smbus
r8169
usbcore
realtek
mdio_devres
libphy
usb_common
fan
video

** Network interface configuration:
*** /etc/network/interfaces:

auto lo lan

iface lo inet loopback

iface lan inet static
    address 192.168.18.3/21
    gateway 192.168.18.1


** Network status:
*** IP interfaces and addresses:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever

2: wan: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000

    link/ether 74:d4:35:99:d4:ed brd ff:ff:ff:ff:ff:ff
    altname enp3s0

3: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

    link/ether aa:aa:aa:00:75:9c brd ff:ff:ff:ff:ff:ff
    altname enp5s3
    inet 192.168.18.3/21 brd 192.168.23.255 scope global lan
       valid_lft forever preferred_lft forever
    inet6 fe80::a8aa:aaff:fe00:759c/64 scope link
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                | Transmit

 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed     lo:       0       0    0    0    0     0          0 0        0       0    0    0    0     0       0          0    wan:       0       0    0    0    0     0          0 0        0       0    0    0    0     0       0          0    lan: 22296619593 14983831    0 36831    0     0          0 2236 610233911 4069481    0    0    0     0       0          0

** PCI devices:

00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)     Subsystem: Gigabyte Technology Co., Ltd 4th Gen Core Processor DRAM Controller [1458:5000]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

    Latency: 0
    IOMMU group: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: hsw_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 26
    IOMMU group: 1
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff [size=4K]
    Memory behind bridge: f6000000-f70fffff [size=17M]

    Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff [size=288M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

    Capabilities: [88] Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [1458:5000]

    Capabilities: [80] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00218  Data: 0000
    Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us

            ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x16 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-

        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

            Slot #1, PowerLimit 75.000W; Interlock- NoCompl+

        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

            Changed: MRL- PresDet- LinkState-
        RootCap: CRSVisible-

        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

        RootSta: PME ReqID 0000, PMEStatus- PMEPending-

        DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+              10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Via WAKE#, ARIFwd-

             AtomicOpsCtl: ReqEn- EgressBlck-

        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-

        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Capabilities: [140 v1] Root Complex Link
        Desc:    PortNumber=02 ComponentID=01 EltType=Config

        Link0:    Desc:    TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+

            Addr:    00000000fed19000
    Capabilities: [d94 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])     Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1458:d000]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin A routed to IRQ 34
    IOMMU group: 2
    Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at f000 [size=64]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00018  Data: 0000
    Capabilities: [d0] Power Management version 2

        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: i915
    Kernel modules: i915

00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)     Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:2010]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 36
    IOMMU group: 3
    Region 0: Memory at f7a14000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00398  Data: 0000

    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00

        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-

    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB xHCI [1458:5007]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin A routed to IRQ 32
    IOMMU group: 4
    Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [70] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
        Address: 00000000fee00338  Data: 0000
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family MEI Controller [1458:1c3a]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin A routed to IRQ 33
    IOMMU group: 5
    Region 0: Memory at f7a1e000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee00358  Data: 0000
    Kernel driver in use: mei_me
    Kernel modules: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin A routed to IRQ 16
    IOMMU group: 6
    Region 0: Memory at f7a1c000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset High Definition Audio Controller [1458:a002]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 37
    IOMMU group: 7
    Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee003d8  Data: 0000

    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00

        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-

    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
        VC1:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=2 ArbSelect=Fixed TC/VC=04
            Status:    NegoPending- InProgress-
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 27
    IOMMU group: 8
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]

    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us

            ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible-

        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+

             10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-

             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00238  Data: 0000

    Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family PCI Express Root Port [1458:5001]

    Capabilities: [a0] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 28
    IOMMU group: 9
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff [size=4K]
    Memory behind bridge: f7900000-f79fffff [size=1M]

    Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff [size=1M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us

            ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

            Slot #2, PowerLimit 10.000W; Interlock- NoCompl+

        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

            Changed: MRL- PresDet- LinkState-
        RootCap: CRSVisible-

        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+

             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-

             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00278  Data: 0000

    Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family PCI Express Root Port [1458:5001]

    Capabilities: [a0] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin D routed to IRQ 29
    IOMMU group: 10
    Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff [size=4K]
    Memory behind bridge: f7800000-f78fffff [size=1M]
    Prefetchable memory behind bridge: [disabled]

    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us

            ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

            Slot #3, PowerLimit 10.000W; Interlock- NoCompl+

        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

            Changed: MRL- PresDet- LinkState-
        RootCap: CRSVisible-

        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+

             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-

             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee002b8  Data: 0000

    Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family PCI Express Root Port [1458:5001]

    Capabilities: [a0] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin A routed to IRQ 23
    IOMMU group: 11
    Region 0: Memory at f7a1b000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 05)     Subsystem: Gigabyte Technology Co., Ltd Z87 Express LPC Controller [1458:5001]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    IOMMU group: 12
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1458:b005]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin B routed to IRQ 31
    IOMMU group: 12
    Region 0: I/O ports at f0b0 [size=8]
    Region 1: I/O ports at f0a0 [size=4]
    Region 2: I/O ports at f090 [size=8]
    Region 3: I/O ports at f080 [size=4]
    Region 4: I/O ports at f060 [size=32]
    Region 5: Memory at f7a1a000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee002f8  Data: 0000
    Capabilities: [70] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
    Kernel driver in use: ahci
    Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)     Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family SMBus Controller [1458:5001]     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Interrupt: pin C routed to IRQ 18
    IOMMU group: 12
    Region 0: Memory at f7a19000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at f040 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])

    Subsystem: Gigabyte Technology Co., Ltd GT218 [GeForce 210] [1458:3525]

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 35
    IOMMU group: 1
    Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at e000 [size=128]
    Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee00378  Data: 0000
    Capabilities: [78] Express (v2) Endpoint, MSI 00

        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W

        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us

            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 128 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x16 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

        DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,

             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
    Capabilities: [128 v1] Power Budgeting <?>

    Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>

    Kernel driver in use: nouveau
    Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)     Subsystem: Gigabyte Technology Co., Ltd High Definition Audio Controller [1458:3525]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 17
    IOMMU group: 1
    Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [60] Power Management version 3

        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [78] Express (v2) Endpoint, MSI 00

        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W

        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <1us

            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 128 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x16 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

        DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,

             AtomicOpsCtl: ReqEn-

        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

    Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]

    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    IOMMU group: 13
    Region 0: I/O ports at d000 [size=256]
    Region 2: Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
    Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [70] Express (v2) Endpoint, MSI 01

        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W

        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes

        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us

            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-

             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-

             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-

        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,

             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-

             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

             Compliance De-emphasis: -6dB

        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-

             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00000800
    Capabilities: [d0] Vital Product Data
        Not readable
    Capabilities: [100 v1] Advanced Error Reporting

        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-

            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [140 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
    Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
    Kernel driver in use: r8169
    Kernel modules: r8169

04:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 19
    IOMMU group: 14
    Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
    I/O behind bridge: 0000c000-0000cfff [size=4K]
    Memory behind bridge: f7800000-f78fffff [size=1M]
    Prefetchable memory behind bridge: [disabled]

    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
    Capabilities: [90] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

    Capabilities: [a0] Subsystem: Gigabyte Technology Co., Ltd 82801 PCI Bridge [1458:8892]

05:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)     Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 18
    IOMMU group: 14
    Region 0: I/O ports at c000 [size=256]
    Region 1: Memory at f7820000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at f7800000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2

        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)

        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: r8169
    Kernel modules: r8169


** USB devices:
not available


-- System Information:
Debian Release: 11.2
  APT prefers stable-updates

  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')

Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-10-amd64 (SMP w/4 CPU threads)

Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8), LANGUAGE not set

Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-5.10.0-10-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-10-amd64 recommends:
pn  apparmor             <none>
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-10-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.04-20
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-10-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---

--- Begin Message ---

• To: 1003900-done@bugs.debian.org
• Cc: 1003900-submitter@bugs.debian.org
• Subject: Closing this bug (BTS maintenance for src:linux bugs)
• From: carnil@debian.org
• Date: Thu, 20 Feb 2025 14:27:08 +0100 (CET)
• Message-id: <20250220132708.C27EFBE2EE7@eldamar.lan>

Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---