--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Cc: post@hiereth.de
- Subject: linux-image-4.19.0-5-686: communication with scanner on usb bus often fails
- From: post@hiereth.de
- Date: Sun, 24 May 2020 09:22:07 +0200
- Message-id: <20200524072207.GA2903@rigel.local>
Package: src:linux
Version: 4.19.37-5
Severity: normal
Dear Maintainer,
I want to use a canon usb scanner Canoscan 630u. The scanner works with a
probability of 1 to 50. The conditions whether it will work or not are
not clear.
The debug output of the driver module has two failure scenarios:
a) The Scanner and Driver first communicate with each other, e.g. for
setting scan parameters, but a "write control error" occurs when the
scanner shall deliver the higher amounts of data during the scan
itself.
debcanon630u] sane_start
[canon630u] CANON_set_scan_parameters:
[canon630u] cal = 0
[canon630u] gray = 0 (ignored)
[canon630u] res = 75
[canon630u] gain = 1
[canon630u] gamma = 1.599991
[canon630u] in 600dpi pixels:
[canon630u] left = 0, top = 0
[canon630u] right = 5099, bottom = 6999
[canon630u] CANON_start_scan called
[canon630u] init query: 5
[canon630u] gl640WriteControl error <<<<< first error
[canon630u] Failure on line of canon630u-common.c: 215
[canon630u] gl640WriteControl error
[canon630u] gl640WriteControl error
[canon630u] Failure on line of canon630u-common.c: 214
[canon630u] gl640WriteControl error
[canon630u] gl640WriteControl error
b) The scanner is not at all ready to communicate. The simple remedy
here is to reset the usb device with the command usbreset:
[canon630u] sane_get_option_descriptor: option = 1
[canon630u] sane_get_option_descriptor: option = 2
[canon630u] sane_get_option_descriptor: option = 3
[canon630u] sane_get_option_descriptor: option = 4
[canon630u] sane_get_option_descriptor: option = 5
[canon630u] sane_get_option_descriptor: option = 6
[canon630u] sane_get_option_descriptor: option = 7
[canon630u] sane_get_option_descriptor: option = 8
[canon630u] sane_control_option: handle=0x2308100, opt=7, act=0, val=0x48a1c8, info=(nil)
[canon630u] sane_control_option: handle=0x2308100, opt=5, act=0, val=0xbfc05b58, info=(nil)
[canon630u] sane_control_option: handle=0x2308100, opt=8, act=0, val=0x48a1cc, info=(nil)
[canon630u] sane_control_option: handle=0x2308100, opt=6, act=0, val=0xbfc05b58, info=(nil)
[canon630u] sane_control_option: handle=0x2308100, opt=5, act=0, val=0xbfc05c24, info=(nil)
[canon630u] sane_get_option_descriptor: option = 7
[canon630u] sane_control_option: handle=0x2308100, opt=7, act=1, val=0xbfc05c38, info=0xbfc05b58
[canon630u] sane_control_option: handle=0x2308100, opt=6, act=0, val=0xbfc05c24, info=(nil)
[canon630u] sane_get_option_descriptor: option = 8
[canon630u] sane_control_option: handle=0x2308100, opt=8, act=1, val=0xbfc05c38, info=0xbfc05b58
[canon630u] sane_start
[canon630u] CANON_set_scan_parameters:
[canon630u] cal = 0
[canon630u] gray = 0 (ignored)
[canon630u] res = 75
[canon630u] gain = 1
[canon630u] gamma = 1.599991
[canon630u] in 600dpi pixels:
[canon630u] left = 0, top = 0
[canon630u] right = 5099, bottom = 6999
[canon630u] CANON_start_scan called
[canon630u] gl640WriteControl <<<first error
[canon630u] Initial write request failed.
[canon630u] Can't talk on USB.
scanimage: sane_start: Error during device I/O
[canon630u] sane_cancel: handle = 0x2308100
[canon630u] sane_cancel: cancelling is unsupported in this backend
[canon630u] sane_close
[canon630u] CANON_close_device:
[canon630u] sane_exit
I tried to get this scanner working with two other machines. A Fujitsu
and HP Notebook. With both of them the scanner works as expected. I got
the impression that the problem is due to a kernel module which is
responsible.
With my machine, the output of lsusb -t is
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 20, If 0, Class=, Driver=, 12M <<<< scanner, idle
|__ Port 2: Dev 18, If 0, Class=Mass Storage, Driver=usb-storage, 12M
While scanning, the output is
root@rigel:/home/hiereth# lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 20, If 0, Class=, Driver=usbfs, 12M <<<< scanner, working
|__ Port 2: Dev 18, If 0, Class=Mass Storage, Driver=usb-storage, 12M
With the two notebooks that work, with class root_hub, the driver
ohci-pci/4p appears. Maybe this driver allows a proper exchange of data
between the scanner and the machine. But my first attemps to load the
module by hand with modprobe ohci-pci did not establish communication on
the usb bus at all
I would appreciate your support. Best regards
Markus Hiereth
-- Package-specific info:
** Version:
Linux version 4.19.0-5-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-686 root=UUID=484af8ac-a9b1-4078-a987-a88756fdd18c ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
uas
usb_storage
sg
serio_raw
pcspkr
evdev
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ne
8390p
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
aes_i586
sr_mod
cdrom
sd_mod
ata_generic
ata_piix
libata
uhci_hcd
ehci_hcd
usbcore
scsi_mod
psmouse
i2c_piix4
usb_common
floppy
fan
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.178.15
netmask 255.255.255.0
gateway 192.168.178.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 00:80:ad:74:23:8f brd ff:ff:ff:ff:ff:ff
inet 192.168.178.15/24 brd 192.168.178.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::280:adff:fe74:238f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 160416 533 0 0 0 0 0 234 44605 427 0 0 0 11 0 0
lo: 73252 492 0 0 0 0 0 0 73252 492 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
958 total packets received
0 forwarded
0 incoming packets discarded
958 incoming packets delivered
851 requests sent out
40 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
63 active connection openings
45 passive connection openings
0 failed connection attempts
2 connection resets received
0 connections established
707 segments received
707 segments sent out
0 segments retransmitted
0 bad segments received
6 resets sent
Udp:
114 packets received
0 packets to unknown port received
0 packet receive errors
80 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 75
UdpLite:
TcpExt:
43 TCP sockets finished time wait in fast timer
17 delayed acks sent
158 packet headers predicted
220 acknowledgments not containing data payload received
38 predicted acknowledgments
3 connections reset due to unexpected data
TCPRcvCoalesce: 119
TCPOrigDataSent: 267
TCPDelivered: 328
IpExt:
InMcastPkts: 117
OutMcastPkts: 85
InBcastPkts: 75
InOctets: 222775
OutOctets: 106533
InMcastOctets: 7993
OutMcastOctets: 4981
InBcastOctets: 8322
InNoECTPkts: 958
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e7ffffff
Prefetchable memory behind bridge: 0c000000-0c0fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:07.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] 3D Rage PRO AGP 2X [1002:4742] (rev 5c) (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Rage Pro Turbo AGP 2X [1002:0084]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: atyfb
** USB devices:
Bus 001 Device 018: ID 13fe:4100 Kingston Technology Company Inc. Flash drive
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.19.0-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-686 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-686 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-686 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-686 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
May 24 06:22:55 rigel kernel: [ 0.000000] Linux version 4.19.0-5-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
May 24 06:22:55 rigel kernel: [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-provided physical RAM map:
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000bfeffff] usable
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x000000000bff0000-0x000000000bff2fff] ACPI NVS
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x000000000bff3000-0x000000000bffffff] ACPI data
May 24 06:22:55 rigel kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
May 24 06:22:55 rigel kernel: [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
May 24 06:22:55 rigel kernel: [ 0.000000] Legacy DMI 2.1 present.
May 24 06:22:55 rigel kernel: [ 0.000000] DMI: /i440BX-8671, BIOS 4.51 PG 09/17/98
May 24 06:22:55 rigel kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
May 24 06:22:55 rigel kernel: [ 0.000000] tsc: Detected 400.903 MHz processor
May 24 06:22:55 rigel kernel: [ 0.016498] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 24 06:22:55 rigel kernel: [ 0.016526] e820: remove [mem 0x000a0000-0x000fffff] usable
May 24 06:22:55 rigel kernel: [ 0.016566] last_pfn = 0xbff0 max_arch_pfn = 0x100000
May 24 06:22:55 rigel kernel: [ 0.016603] MTRR default type: uncachable
May 24 06:22:55 rigel kernel: [ 0.016612] MTRR fixed ranges enabled:
May 24 06:22:55 rigel kernel: [ 0.016624] 00000-9FFFF write-back
May 24 06:22:55 rigel kernel: [ 0.016634] A0000-BFFFF uncachable
May 24 06:22:55 rigel kernel: [ 0.016643] C0000-C7FFF write-protect
May 24 06:22:55 rigel kernel: [ 0.016654] C8000-FFFFF uncachable
May 24 06:22:55 rigel kernel: [ 0.016661] MTRR variable ranges enabled:
May 24 06:22:55 rigel kernel: [ 0.016674] 0 base 000000000 mask FF8000000 write-back
May 24 06:22:55 rigel kernel: [ 0.016686] 1 base 008000000 mask FFC000000 write-back
May 24 06:22:55 rigel kernel: [ 0.016693] 2 disabled
May 24 06:22:55 rigel kernel: [ 0.016700] 3 disabled
May 24 06:22:55 rigel kernel: [ 0.016706] 4 disabled
May 24 06:22:55 rigel kernel: [ 0.016712] 5 disabled
May 24 06:22:55 rigel kernel: [ 0.016719] 6 disabled
May 24 06:22:55 rigel kernel: [ 0.016725] 7 disabled
May 24 06:22:55 rigel kernel: [ 0.018920] x86/PAT: PAT not supported by CPU.
May 24 06:22:55 rigel kernel: [ 0.019259] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
May 24 06:22:55 rigel kernel: [ 0.132901] initial memory mapped: [mem 0x00000000-0x06ffffff]
May 24 06:22:55 rigel kernel: [ 0.132925] Base memory trampoline at [(ptrval)] 9b000 size 16384
May 24 06:22:55 rigel kernel: [ 0.133183] BRK [0x06a88000, 0x06a88fff] PGTABLE
May 24 06:22:55 rigel kernel: [ 0.133373] RAMDISK: [mem 0x093b9000-0x0b155fff]
May 24 06:22:55 rigel kernel: [ 0.133427] ACPI: Early table checksum verification disabled
May 24 06:22:55 rigel kernel: [ 0.140043] ACPI: RSDP 0x00000000000F6760 000014 (v00 GBT )
May 24 06:22:55 rigel kernel: [ 0.140074] ACPI: RSDT 0x000000000BFF3000 000028 (v01 GBT AWRDACPI 00000000 00000000)
May 24 06:22:55 rigel kernel: [ 0.140121] ACPI: FACP 0x000000000BFF3040 000074 (v01 GBT AWRDACPI 00000000 00000000)
May 24 06:22:55 rigel kernel: [ 0.140175] ACPI: DSDT 0x000000000BFF30C0 001E9F (v01 GBT AWRDACPI 00001000 MSFT 01000007)
May 24 06:22:55 rigel kernel: [ 0.140216] ACPI: FACS 0x000000000BFF0000 000040
May 24 06:22:55 rigel kernel: [ 0.140282] 0MB HIGHMEM available.
May 24 06:22:55 rigel kernel: [ 0.140293] 191MB LOWMEM available.
May 24 06:22:55 rigel kernel: [ 0.140300] mapped low ram: 0 - 0bff0000
May 24 06:22:55 rigel kernel: [ 0.140306] low ram: 0 - 0bff0000
May 24 06:22:55 rigel kernel: [ 0.140342] BRK [0x06a89000, 0x06a89fff] PGTABLE
May 24 06:22:55 rigel kernel: [ 0.140363] Zone ranges:
May 24 06:22:55 rigel kernel: [ 0.140369] DMA [mem 0x0000000000001000-0x0000000000ffffff]
May 24 06:22:55 rigel kernel: [ 0.140384] Normal [mem 0x0000000001000000-0x000000000bfeffff]
May 24 06:22:55 rigel kernel: [ 0.140396] HighMem empty
May 24 06:22:55 rigel kernel: [ 0.140406] Movable zone start for each node
May 24 06:22:55 rigel kernel: [ 0.140411] Early memory node ranges
May 24 06:22:55 rigel kernel: [ 0.140420] node 0: [mem 0x0000000000001000-0x000000000009efff]
May 24 06:22:55 rigel kernel: [ 0.140430] node 0: [mem 0x0000000000100000-0x000000000bfeffff]
May 24 06:22:55 rigel kernel: [ 0.140442] Initmem setup node 0 [mem 0x0000000000001000-0x000000000bfeffff]
May 24 06:22:55 rigel kernel: [ 0.140455] On node 0 totalpages: 49038
May 24 06:22:55 rigel kernel: [ 0.149863] DMA zone: 40 pages used for memmap
May 24 06:22:55 rigel kernel: [ 0.149874] DMA zone: 0 pages reserved
May 24 06:22:55 rigel kernel: [ 0.149883] DMA zone: 3998 pages, LIFO batch:0
May 24 06:22:55 rigel kernel: [ 0.150700] Normal zone: 440 pages used for memmap
May 24 06:22:55 rigel kernel: [ 0.150709] Normal zone: 45040 pages, LIFO batch:7
May 24 06:22:55 rigel kernel: [ 0.160438] Using APIC driver default
May 24 06:22:55 rigel kernel: [ 0.160571] ACPI: PM-Timer IO Port: 0x4008
May 24 06:22:55 rigel kernel: [ 0.160597] Local APIC disabled by BIOS -- you can enable it with "lapic"
May 24 06:22:55 rigel kernel: [ 0.160603] APIC: disable apic facility
May 24 06:22:55 rigel kernel: [ 0.160607] APIC: switched to apic NOOP
May 24 06:22:55 rigel kernel: [ 0.160621] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
May 24 06:22:55 rigel kernel: [ 0.160701] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
May 24 06:22:55 rigel kernel: [ 0.160715] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
May 24 06:22:55 rigel kernel: [ 0.160723] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
May 24 06:22:55 rigel kernel: [ 0.160731] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
May 24 06:22:55 rigel kernel: [ 0.160751] [mem 0x0c000000-0xfffeffff] available for PCI devices
May 24 06:22:55 rigel kernel: [ 0.160758] Booting paravirtualized kernel on bare hardware
May 24 06:22:55 rigel kernel: [ 0.160784] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
May 24 06:22:55 rigel kernel: [ 0.160872] random: get_random_bytes called from start_kernel+0x81/0x474 with crng_init=0
May 24 06:22:55 rigel kernel: [ 0.160920] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
May 24 06:22:55 rigel kernel: [ 0.162169] percpu: Embedded 29 pages/cpu s87180 r0 d31604 u118784
May 24 06:22:55 rigel kernel: [ 0.162208] pcpu-alloc: s87180 r0 d31604 u118784 alloc=29*4096
May 24 06:22:55 rigel kernel: [ 0.162219] pcpu-alloc: [0] 0
May 24 06:22:55 rigel kernel: [ 0.162330] Built 1 zonelists, mobility grouping on. Total pages: 48558
May 24 06:22:55 rigel kernel: [ 0.162345] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-686 root=UUID=484af8ac-a9b1-4078-a987-a88756fdd18c ro quiet
May 24 06:22:55 rigel kernel: [ 0.163445] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
May 24 06:22:55 rigel kernel: [ 0.163756] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
May 24 06:22:55 rigel kernel: [ 0.163772] BRK [0x06a8a000, 0x06a8afff] PGTABLE
May 24 06:22:55 rigel kernel: [ 0.163849] Initializing CPU#0
May 24 06:22:55 rigel kernel: [ 0.163882] Initializing HighMem for node 0 (00000000:00000000)
May 24 06:22:55 rigel kernel: [ 0.180090] Memory: 152708K/196152K available (6605K kernel code, 639K rwdata, 2060K rodata, 836K init, 436K bss, 43444K reserved, 0K cma-reserved, 0K highmem)
May 24 06:22:55 rigel kernel: [ 0.180136] virtual kernel memory layout:
May 24 06:22:55 rigel kernel: [ 0.180136] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
May 24 06:22:55 rigel kernel: [ 0.180136] cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB)
May 24 06:22:55 rigel kernel: [ 0.180136] pkmap : 0xfec00000 - 0xff000000 (4096 kB)
May 24 06:22:55 rigel kernel: [ 0.180136] vmalloc : 0xcc7f0000 - 0xfebfe000 ( 804 MB)
May 24 06:22:55 rigel kernel: [ 0.180136] lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
May 24 06:22:55 rigel kernel: [ 0.180136] .init : 0xc6927000 - 0xc69f8000 ( 836 kB)
May 24 06:22:55 rigel kernel: [ 0.180136] .data : 0xc6673470 - 0xc6917e40 (2706 kB)
May 24 06:22:55 rigel kernel: [ 0.180136] .text : 0xc6000000 - 0xc6673470 (6605 kB)
May 24 06:22:55 rigel kernel: [ 0.180142] Checking if this processor honours the WP bit even in supervisor mode...Ok.
May 24 06:22:55 rigel kernel: [ 0.181395] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
May 24 06:22:55 rigel kernel: [ 0.181412] ftrace: allocating 29264 entries in 58 pages
May 24 06:22:55 rigel kernel: [ 0.284562] rcu: Hierarchical RCU implementation.
May 24 06:22:55 rigel kernel: [ 0.284582] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
May 24 06:22:55 rigel kernel: [ 0.284593] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
May 24 06:22:55 rigel kernel: [ 0.326714] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
May 24 06:22:55 rigel kernel: [ 0.327329] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
May 24 06:22:55 rigel kernel: [ 0.330303] Console: colour VGA+ 80x25
May 24 06:22:55 rigel kernel: [ 0.330343] console [tty0] enabled
May 24 06:22:55 rigel kernel: [ 0.330392] ACPI: Core revision 20180810
May 24 06:22:55 rigel kernel: [ 0.330810] ACPI: setting ELCR to 0200 (from 0c00)
May 24 06:22:55 rigel kernel: [ 0.330861] APIC: Keep in PIC mode(8259)
May 24 06:22:55 rigel kernel: [ 0.330886] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x5c75e41fa2, max_idle_ns: 440795210015 ns
May 24 06:22:55 rigel kernel: [ 0.330958] Calibrating delay loop (skipped), value calculated using timer frequency.. 801.80 BogoMIPS (lpj=1603612)
May 24 06:22:55 rigel kernel: [ 0.330983] pid_max: default: 32768 minimum: 301
May 24 06:22:55 rigel kernel: [ 0.331363] Security Framework initialized
May 24 06:22:55 rigel kernel: [ 0.331375] Yama: disabled by default; enable with sysctl kernel.yama.*
May 24 06:22:55 rigel kernel: [ 0.331572] AppArmor: AppArmor initialized
May 24 06:22:55 rigel kernel: [ 0.331756] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
May 24 06:22:55 rigel kernel: [ 0.331786] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
May 24 06:22:55 rigel kernel: [ 0.333739] mce: CPU supports 5 MCE banks
May 24 06:22:55 rigel kernel: [ 0.333804] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
May 24 06:22:55 rigel kernel: [ 0.333814] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
May 24 06:22:55 rigel kernel: [ 0.333829] Spectre V2 : Mitigation: Full generic retpoline
May 24 06:22:55 rigel kernel: [ 0.333835] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
May 24 06:22:55 rigel kernel: [ 0.333842] Speculative Store Bypass: Vulnerable
May 24 06:22:55 rigel kernel: [ 0.333848] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
May 24 06:22:55 rigel kernel: [ 0.333948] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
May 24 06:22:55 rigel kernel: [ 0.353206] Freeing SMP alternatives memory: 24K
May 24 06:22:55 rigel kernel: [ 0.362555] smpboot: weird, boot CPU (#0) not listed by the BIOS
May 24 06:22:55 rigel kernel: [ 0.362565] smpboot: SMP disabled
May 24 06:22:55 rigel kernel: [ 0.364150] Performance Events:
May 24 06:22:55 rigel kernel: [ 0.364168] no APIC, boot with the "lapic" boot parameter to force-enable it.
May 24 06:22:55 rigel kernel: [ 0.364173] no hardware sampling interrupt available.
May 24 06:22:55 rigel kernel: [ 0.364183] p6 PMU driver.
May 24 06:22:55 rigel kernel: [ 0.364196] ... version: 0
May 24 06:22:55 rigel kernel: [ 0.364202] ... bit width: 32
May 24 06:22:55 rigel kernel: [ 0.364207] ... generic registers: 2
May 24 06:22:55 rigel kernel: [ 0.364214] ... value mask: 00000000ffffffff
May 24 06:22:55 rigel kernel: [ 0.364219] ... max period: 000000007fffffff
May 24 06:22:55 rigel kernel: [ 0.364224] ... fixed-purpose events: 0
May 24 06:22:55 rigel kernel: [ 0.364229] ... event mask: 0000000000000003
May 24 06:22:55 rigel kernel: [ 0.364751] rcu: Hierarchical SRCU implementation.
May 24 06:22:55 rigel kernel: [ 0.369057] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
May 24 06:22:55 rigel kernel: [ 0.369427] smp: Bringing up secondary CPUs ...
May 24 06:22:55 rigel kernel: [ 0.369441] smp: Brought up 1 node, 1 CPU
May 24 06:22:55 rigel kernel: [ 0.369448] smpboot: Max logical packages: 1
May 24 06:22:55 rigel kernel: [ 0.369460] smpboot: Total of 1 processors activated (801.80 BogoMIPS)
May 24 06:22:55 rigel kernel: [ 0.370492] devtmpfs: initialized
May 24 06:22:55 rigel kernel: [ 0.372440] PM: Registering ACPI NVS region [mem 0x0bff0000-0x0bff2fff] (12288 bytes)
May 24 06:22:55 rigel kernel: [ 0.372844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
May 24 06:22:55 rigel kernel: [ 0.372875] futex hash table entries: 256 (order: 2, 16384 bytes)
May 24 06:22:55 rigel kernel: [ 0.373253] pinctrl core: initialized pinctrl subsystem
May 24 06:22:55 rigel kernel: [ 0.375246] NET: Registered protocol family 16
May 24 06:22:55 rigel kernel: [ 0.376177] audit: initializing netlink subsys (disabled)
May 24 06:22:55 rigel kernel: [ 0.377609] cpuidle: using governor ladder
May 24 06:22:55 rigel kernel: [ 0.377620] cpuidle: using governor menu
May 24 06:22:55 rigel kernel: [ 0.377912] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
May 24 06:22:55 rigel kernel: [ 0.378089] ACPI: bus type PCI registered
May 24 06:22:55 rigel kernel: [ 0.378104] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 24 06:22:55 rigel kernel: [ 0.421169] PCI: PCI BIOS revision 2.10 entry at 0xfad20, last bus=1
May 24 06:22:55 rigel kernel: [ 0.421178] PCI: Using configuration type 1 for base access
May 24 06:22:55 rigel kernel: [ 0.421457] audit: type=2000 audit(1590301315.044:1): state=initialized audit_enabled=0 res=1
May 24 06:22:55 rigel kernel: [ 0.431844] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
May 24 06:22:55 rigel kernel: [ 0.434464] ACPI: Added _OSI(Module Device)
May 24 06:22:55 rigel kernel: [ 0.434475] ACPI: Added _OSI(Processor Device)
May 24 06:22:55 rigel kernel: [ 0.434484] ACPI: Added _OSI(3.0 _SCP Extensions)
May 24 06:22:55 rigel kernel: [ 0.434493] ACPI: Added _OSI(Processor Aggregator Device)
May 24 06:22:55 rigel kernel: [ 0.434504] ACPI: Added _OSI(Linux-Dell-Video)
May 24 06:22:55 rigel kernel: [ 0.434514] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
May 24 06:22:55 rigel kernel: [ 0.444125] ACPI: 1 ACPI AML tables successfully acquired and loaded
May 24 06:22:55 rigel kernel: [ 0.448553] ACPI: Interpreter enabled
May 24 06:22:55 rigel kernel: [ 0.448709] ACPI: (supports S0 S1 S4 S5)
May 24 06:22:55 rigel kernel: [ 0.448719] ACPI: Using PIC for interrupt routing
May 24 06:22:55 rigel kernel: [ 0.448867] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
May 24 06:22:55 rigel kernel: [ 0.495708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00])
May 24 06:22:55 rigel kernel: [ 0.495745] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
May 24 06:22:55 rigel kernel: [ 0.495786] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
May 24 06:22:55 rigel kernel: [ 0.495811] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
May 24 06:22:55 rigel kernel: [ 0.495962] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
May 24 06:22:55 rigel kernel: [ 0.495979] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.495991] acpi PNP0A03:00: host bridge window [io 0x0d00-0x3fff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496003] acpi PNP0A03:00: host bridge window [io 0x4000-0x4041] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496014] acpi PNP0A03:00: host bridge window [io 0x4042-0x4fff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496025] acpi PNP0A03:00: host bridge window [io 0x5000-0x500f] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496037] acpi PNP0A03:00: host bridge window [io 0x5010-0xffff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496049] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496061] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496073] acpi PNP0A03:00: host bridge window [mem 0x00100000-0xffffffff window] (ignored)
May 24 06:22:55 rigel kernel: [ 0.496081] PCI: root bus 00: using default resources
May 24 06:22:55 rigel kernel: [ 0.496623] PCI host bridge to bus 0000:00
May 24 06:22:55 rigel kernel: [ 0.496644] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
May 24 06:22:55 rigel kernel: [ 0.496658] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
May 24 06:22:55 rigel kernel: [ 0.496673] pci_bus 0000:00: root bus resource [bus 00]
May 24 06:22:55 rigel kernel: [ 0.496732] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
May 24 06:22:55 rigel kernel: [ 0.496785] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
May 24 06:22:55 rigel kernel: [ 0.497280] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
May 24 06:22:55 rigel kernel: [ 0.497780] pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
May 24 06:22:55 rigel kernel: [ 0.498349] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
May 24 06:22:55 rigel kernel: [ 0.498441] pci 0000:00:07.1: reg 0x20: [io 0xf000-0xf00f]
May 24 06:22:55 rigel kernel: [ 0.498483] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
May 24 06:22:55 rigel kernel: [ 0.498494] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
May 24 06:22:55 rigel kernel: [ 0.498506] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
May 24 06:22:55 rigel kernel: [ 0.498517] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
May 24 06:22:55 rigel kernel: [ 0.498976] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
May 24 06:22:55 rigel kernel: [ 0.499067] pci 0000:00:07.2: reg 0x20: [io 0xe000-0xe01f]
May 24 06:22:55 rigel kernel: [ 0.499564] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
May 24 06:22:55 rigel kernel: [ 0.499582] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
May 24 06:22:55 rigel kernel: [ 0.499582] * this clock source is slow. Consider trying other clock sources
May 24 06:22:55 rigel kernel: [ 0.499727] pci 0000:00:07.3: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
May 24 06:22:55 rigel kernel: [ 0.499746] pci 0000:00:07.3: quirk: [io 0x5000-0x500f] claimed by PIIX4 SMB
May 24 06:22:55 rigel kernel: [ 0.500257] pci_bus 0000:01: extended config space not accessible
May 24 06:22:55 rigel kernel: [ 0.500412] pci_bus 0000:01: busn_res: can not insert [bus 01] under [bus 00] (conflicts with (null) [bus 00])
May 24 06:22:55 rigel kernel: [ 0.500466] pci 0000:01:00.0: [1002:4742] type 00 class 0x030000
May 24 06:22:55 rigel kernel: [ 0.500510] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
May 24 06:22:55 rigel kernel: [ 0.500535] pci 0000:01:00.0: reg 0x14: [io 0xd000-0xd0ff]
May 24 06:22:55 rigel kernel: [ 0.500560] pci 0000:01:00.0: reg 0x18: [mem 0xe6000000-0xe6000fff]
May 24 06:22:55 rigel kernel: [ 0.500615] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
May 24 06:22:55 rigel kernel: [ 0.501022] pci 0000:00:01.0: PCI bridge to [bus 01]
May 24 06:22:55 rigel kernel: [ 0.501043] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
May 24 06:22:55 rigel kernel: [ 0.501059] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
May 24 06:22:55 rigel kernel: [ 0.501090] pci_bus 0000:00: on NUMA node 0
May 24 06:22:55 rigel kernel: [ 0.502757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
May 24 06:22:55 rigel kernel: [ 0.504133] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
May 24 06:22:55 rigel kernel: [ 0.505285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
May 24 06:22:55 rigel kernel: [ 0.506645] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
May 24 06:22:55 rigel kernel: [ 0.522303] pci 0000:01:00.0: vgaarb: setting as boot VGA device
May 24 06:22:55 rigel kernel: [ 0.522320] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
May 24 06:22:55 rigel kernel: [ 0.522331] pci 0000:01:00.0: vgaarb: bridge control possible
May 24 06:22:55 rigel kernel: [ 0.522338] vgaarb: loaded
May 24 06:22:55 rigel kernel: [ 0.523055] EDAC MC: Ver: 3.0.0
May 24 06:22:55 rigel kernel: [ 0.524315] PCI: Using ACPI for IRQ routing
May 24 06:22:55 rigel kernel: [ 0.524333] PCI: pci_cache_line_size set to 32 bytes
May 24 06:22:55 rigel kernel: [ 0.524397] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
May 24 06:22:55 rigel kernel: [ 0.524410] e820: reserve RAM buffer [mem 0x0bff0000-0x0bffffff]
May 24 06:22:55 rigel kernel: [ 0.526062] clocksource: Switched to clocksource tsc-early
May 24 06:22:55 rigel kernel: [ 0.651920] VFS: Disk quotas dquot_6.6.0
May 24 06:22:55 rigel kernel: [ 0.652083] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 24 06:22:55 rigel kernel: [ 0.653175] AppArmor: AppArmor Filesystem Enabled
May 24 06:22:55 rigel kernel: [ 0.653371] pnp: PnP ACPI init
May 24 06:22:55 rigel kernel: [ 0.656016] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656035] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656051] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656065] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656080] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656095] system 00:00: [mem 0x00100000-0x0bfeffff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656109] system 00:00: [mem 0x0bff0000-0x0bffffff] could not be reserved
May 24 06:22:55 rigel kernel: [ 0.656125] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
May 24 06:22:55 rigel kernel: [ 0.656179] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
May 24 06:22:55 rigel kernel: [ 0.656601] system 00:01: [io 0x03f0-0x03f1] has been reserved
May 24 06:22:55 rigel kernel: [ 0.656619] system 00:01: [io 0x04d0-0x04d1] has been reserved
May 24 06:22:55 rigel kernel: [ 0.656668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
May 24 06:22:55 rigel kernel: [ 0.656962] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
May 24 06:22:55 rigel kernel: [ 0.661560] pnp 00:03: [dma 2]
May 24 06:22:55 rigel kernel: [ 0.661839] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
May 24 06:22:55 rigel kernel: [ 0.666151] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
May 24 06:22:55 rigel kernel: [ 0.670513] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
May 24 06:22:55 rigel kernel: [ 0.676675] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
May 24 06:22:55 rigel kernel: [ 0.680330] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
May 24 06:22:55 rigel kernel: [ 0.682275] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
May 24 06:22:55 rigel kernel: [ 0.682320] pnp: PnP ACPI: found 9 devices
May 24 06:22:55 rigel kernel: [ 0.682339] PnPBIOS: Disabled
May 24 06:22:55 rigel kernel: [ 0.736854] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
May 24 06:22:55 rigel kernel: [ 0.736957] pci 0000:00:01.0: BAR 15: assigned [mem 0x0c000000-0x0c0fffff pref]
May 24 06:22:55 rigel kernel: [ 0.736985] pci 0000:01:00.0: BAR 6: assigned [mem 0x0c000000-0x0c01ffff pref]
May 24 06:22:55 rigel kernel: [ 0.737002] pci 0000:00:01.0: PCI bridge to [bus 01]
May 24 06:22:55 rigel kernel: [ 0.737017] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
May 24 06:22:55 rigel kernel: [ 0.737036] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
May 24 06:22:55 rigel kernel: [ 0.737051] pci 0000:00:01.0: bridge window [mem 0x0c000000-0x0c0fffff pref]
May 24 06:22:55 rigel kernel: [ 0.737074] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
May 24 06:22:55 rigel kernel: [ 0.737087] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
May 24 06:22:55 rigel kernel: [ 0.737100] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
May 24 06:22:55 rigel kernel: [ 0.737113] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff]
May 24 06:22:55 rigel kernel: [ 0.737126] pci_bus 0000:01: resource 2 [mem 0x0c000000-0x0c0fffff pref]
May 24 06:22:55 rigel kernel: [ 0.737594] NET: Registered protocol family 2
May 24 06:22:55 rigel kernel: [ 0.739032] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
May 24 06:22:55 rigel kernel: [ 0.739102] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
May 24 06:22:55 rigel kernel: [ 0.739149] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
May 24 06:22:55 rigel kernel: [ 0.739228] TCP: Hash tables configured (established 2048 bind 2048)
May 24 06:22:55 rigel kernel: [ 0.739503] UDP hash table entries: 256 (order: 1, 8192 bytes)
May 24 06:22:55 rigel kernel: [ 0.739562] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
May 24 06:22:55 rigel kernel: [ 0.740107] NET: Registered protocol family 1
May 24 06:22:55 rigel kernel: [ 0.740158] NET: Registered protocol family 44
May 24 06:22:55 rigel kernel: [ 0.740190] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
May 24 06:22:55 rigel kernel: [ 0.742991] PCI Interrupt Link [LNKD] enabled at IRQ 10
May 24 06:22:55 rigel kernel: [ 0.743003] PCI: setting IRQ 10 as level-triggered
May 24 06:22:55 rigel kernel: [ 0.743466] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
May 24 06:22:55 rigel kernel: [ 0.743481] PCI: CLS 32 bytes, default 32
May 24 06:22:55 rigel kernel: [ 0.744045] Unpacking initramfs...
May 24 06:22:55 rigel kernel: [ 1.351877] random: fast init done
May 24 06:22:55 rigel kernel: [ 5.991927] Freeing initrd memory: 30324K
May 24 06:22:55 rigel kernel: [ 5.996855] Initialise system trusted keyrings
May 24 06:22:55 rigel kernel: [ 5.996936] Key type blacklist registered
May 24 06:22:55 rigel kernel: [ 5.997413] workingset: timestamp_bits=14 max_order=16 bucket_order=2
May 24 06:22:55 rigel kernel: [ 6.012164] zbud: loaded
May 24 06:22:55 rigel kernel: [ 6.013186] pstore: using deflate compression
May 24 06:22:55 rigel kernel: [ 7.019429] tsc: Refined TSC clocksource calibration: 400.909 MHz
May 24 06:22:55 rigel kernel: [ 7.019466] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x5c763ec909, max_idle_ns: 440795213001 ns
May 24 06:22:55 rigel kernel: [ 7.019543] clocksource: Switched to clocksource tsc
May 24 06:22:55 rigel kernel: [ 12.281576] Key type asymmetric registered
May 24 06:22:55 rigel kernel: [ 12.281589] Asymmetric key parser 'x509' registered
May 24 06:22:55 rigel kernel: [ 12.281713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
May 24 06:22:55 rigel kernel: [ 12.282128] io scheduler noop registered
May 24 06:22:55 rigel kernel: [ 12.282138] io scheduler deadline registered
May 24 06:22:55 rigel kernel: [ 12.282697] io scheduler cfq registered (default)
May 24 06:22:55 rigel kernel: [ 12.282709] io scheduler mq-deadline registered
May 24 06:22:55 rigel kernel: [ 12.284858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 24 06:22:55 rigel kernel: [ 12.285022] intel_idle: does not run on family 6 model 5
May 24 06:22:55 rigel kernel: [ 12.285130] tsc: Marking TSC unstable due to TSC halts in idle
May 24 06:22:55 rigel kernel: [ 12.286708] clocksource: Switched to clocksource acpi_pm
May 24 06:22:55 rigel kernel: [ 12.287166] isapnp: Scanning for PnP cards...
May 24 06:22:55 rigel kernel: [ 12.378756] 01:01: card 'PnP ISA Ethernet Adapter'
May 24 06:22:55 rigel kernel: [ 12.378767] isapnp: 1 Plug & Play card detected total
May 24 06:22:55 rigel kernel: [ 12.379516] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
May 24 06:22:55 rigel kernel: [ 12.400483] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
May 24 06:22:55 rigel kernel: [ 12.421811] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
May 24 06:22:55 rigel kernel: [ 12.425002] Linux agpgart interface v0.103
May 24 06:22:55 rigel kernel: [ 12.425705] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
May 24 06:22:55 rigel kernel: [ 12.434066] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
May 24 06:22:55 rigel kernel: [ 12.435397] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
May 24 06:22:55 rigel kernel: [ 12.439229] serio: i8042 KBD port at 0x60,0x64 irq 1
May 24 06:22:55 rigel kernel: [ 12.439561] serio: i8042 AUX port at 0x60,0x64 irq 12
May 24 06:22:55 rigel kernel: [ 12.440473] mousedev: PS/2 mouse device common for all mice
May 24 06:22:55 rigel kernel: [ 12.441286] rtc_cmos 00:02: registered as rtc0
May 24 06:22:55 rigel kernel: [ 12.441454] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
May 24 06:22:55 rigel kernel: [ 12.441716] ledtrig-cpu: registered to indicate activity on CPUs
May 24 06:22:55 rigel kernel: [ 12.445400] NET: Registered protocol family 10
May 24 06:22:55 rigel kernel: [ 12.465291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
May 24 06:22:55 rigel kernel: [ 12.530649] Segment Routing with IPv6
May 24 06:22:55 rigel kernel: [ 12.530828] mip6: Mobile IPv6
May 24 06:22:55 rigel kernel: [ 12.530844] NET: Registered protocol family 17
May 24 06:22:55 rigel kernel: [ 12.531357] mpls_gso: MPLS GSO support
May 24 06:22:55 rigel kernel: [ 12.532422] microcode: sig=0x652, pf=0x1, revision=0x14
May 24 06:22:55 rigel kernel: [ 12.532771] microcode: Microcode Update Driver: v2.2.
May 24 06:22:55 rigel kernel: [ 12.532787] Using IPI No-Shortcut mode
May 24 06:22:55 rigel kernel: [ 12.534056] registered taskstats version 1
May 24 06:22:55 rigel kernel: [ 12.534064] Loading compiled-in X.509 certificates
May 24 06:22:55 rigel kernel: [ 13.948780] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
May 24 06:22:55 rigel kernel: [ 13.948973] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
May 24 06:22:55 rigel kernel: [ 13.949116] zswap: loaded using pool lzo/zbud
May 24 06:22:55 rigel kernel: [ 13.949393] AppArmor: AppArmor sha1 policy hashing enabled
May 24 06:22:55 rigel kernel: [ 13.950684] rtc_cmos 00:02: setting system clock to 2020-05-24 06:22:08 UTC (1590301328)
May 24 06:22:55 rigel kernel: [ 13.950878] Unstable clock detected, switching default tracing clock to "global"
May 24 06:22:55 rigel kernel: [ 13.950878] If you want to keep using the local clock, then add:
May 24 06:22:55 rigel kernel: [ 13.950878] "trace_clock=local"
May 24 06:22:55 rigel kernel: [ 13.950878] on the kernel command line
May 24 06:22:55 rigel kernel: [ 13.962221] Freeing unused kernel image memory: 836K
May 24 06:22:55 rigel kernel: [ 13.967477] Write protecting the kernel text: 6608k
May 24 06:22:55 rigel kernel: [ 13.967804] Write protecting the kernel read-only data: 2064k
May 24 06:22:55 rigel kernel: [ 13.967813] Run /init as init process
May 24 06:22:55 rigel kernel: [ 14.934657] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
May 24 06:22:55 rigel kernel: [ 14.943084] ACPI: Power Button [PWRF]
May 24 06:22:55 rigel kernel: [ 15.126151] Floppy drive(s): fd0 is 1.44M
May 24 06:22:55 rigel kernel: [ 15.162705] FDC 0 is a post-1991 82077
May 24 06:22:55 rigel kernel: [ 15.194462] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x5000, revision 0
May 24 06:22:55 rigel kernel: [ 15.522528] SCSI subsystem initialized
May 24 06:22:55 rigel kernel: [ 15.636287] ACPI: bus type USB registered
May 24 06:22:55 rigel kernel: [ 15.636531] usbcore: registered new interface driver usbfs
May 24 06:22:55 rigel kernel: [ 15.636649] usbcore: registered new interface driver hub
May 24 06:22:55 rigel kernel: [ 15.644186] usbcore: registered new device driver usb
May 24 06:22:55 rigel kernel: [ 15.781052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 24 06:22:55 rigel kernel: [ 15.842536] uhci_hcd: USB Universal Host Controller Interface driver
May 24 06:22:55 rigel kernel: [ 15.855393] uhci_hcd 0000:00:07.2: UHCI Host Controller
May 24 06:22:55 rigel kernel: [ 15.855471] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
May 24 06:22:55 rigel kernel: [ 15.855539] uhci_hcd 0000:00:07.2: detected 2 ports
May 24 06:22:55 rigel kernel: [ 15.855668] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e000
May 24 06:22:55 rigel kernel: [ 15.860161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
May 24 06:22:55 rigel kernel: [ 15.860180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 24 06:22:55 rigel kernel: [ 15.860192] usb usb1: Product: UHCI Host Controller
May 24 06:22:55 rigel kernel: [ 15.860204] usb usb1: Manufacturer: Linux 4.19.0-5-686 uhci_hcd
May 24 06:22:55 rigel kernel: [ 15.860214] usb usb1: SerialNumber: 0000:00:07.2
May 24 06:22:55 rigel kernel: [ 15.865118] hub 1-0:1.0: USB hub found
May 24 06:22:55 rigel kernel: [ 15.865961] hub 1-0:1.0: 2 ports detected
May 24 06:22:55 rigel kernel: [ 15.903950] libata version 3.00 loaded.
May 24 06:22:55 rigel kernel: [ 15.936930] ata_piix 0000:00:07.1: version 2.13
May 24 06:22:55 rigel kernel: [ 15.944200] scsi host0: ata_piix
May 24 06:22:55 rigel kernel: [ 15.946561] psmouse serio1: hgpk: ID: 10 00 64
May 24 06:22:55 rigel kernel: [ 15.948491] scsi host1: ata_piix
May 24 06:22:55 rigel kernel: [ 15.949030] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
May 24 06:22:55 rigel kernel: [ 15.949044] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
May 24 06:22:55 rigel kernel: [ 16.151415] ata2.00: ATAPI: MATSHITA CR-588, LS15, max MWDMA2
May 24 06:22:55 rigel kernel: [ 16.151461] ata2.01: ATAPI: IOMEGA ZIP 100 ATAPI, 03.H, max MWDMA1, CDB intr
May 24 06:22:55 rigel kernel: [ 16.155348] ata1.00: ATA-3: IBM-DHEA-38451, HP8OA20C, max UDMA/33
May 24 06:22:55 rigel kernel: [ 16.155362] ata1.00: 16514064 sectors, multi 0: LBA
May 24 06:22:55 rigel kernel: [ 16.155699] ata1.01: ATA-6: Maxtor 52049H3, JAC61HU0, max UDMA/100
May 24 06:22:55 rigel kernel: [ 16.155713] ata1.01: 40021632 sectors, multi 0: LBA
May 24 06:22:55 rigel kernel: [ 16.185227] scsi 0:0:0:0: Direct-Access ATA IBM-DHEA-38451 A20C PQ: 0 ANSI: 5
May 24 06:22:55 rigel kernel: [ 16.188899] scsi 0:0:1:0: Direct-Access ATA Maxtor 52049H3 1HU0 PQ: 0 ANSI: 5
May 24 06:22:55 rigel kernel: [ 16.199059] usb 1-2: new full-speed USB device number 2 using uhci_hcd
May 24 06:22:55 rigel kernel: [ 16.205166] scsi 1:0:0:0: CD-ROM MATSHITA CD-ROM CR-588 LS15 PQ: 0 ANSI: 5
May 24 06:22:55 rigel kernel: [ 16.212493] scsi 1:0:1:0: Direct-Access IOMEGA ZIP 100 03.H PQ: 0 ANSI: 5
May 24 06:22:55 rigel kernel: [ 16.396955] usb 1-2: New USB device found, idVendor=04a9, idProduct=2204, bcdDevice= 0.01
May 24 06:22:55 rigel kernel: [ 16.396974] usb 1-2: New USB device strings: Mfr=0, Product=3, SerialNumber=0
May 24 06:22:55 rigel kernel: [ 16.396986] usb 1-2: Product: CanoScan FB630U
May 24 06:22:55 rigel kernel: [ 16.410303] sd 0:0:0:0: [sda] 16514064 512-byte logical blocks: (8.46 GB/7.87 GiB)
May 24 06:22:55 rigel kernel: [ 16.410404] sd 0:0:0:0: [sda] Write Protect is off
May 24 06:22:55 rigel kernel: [ 16.410421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 24 06:22:55 rigel kernel: [ 16.410580] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 24 06:22:55 rigel kernel: [ 16.423852] sd 0:0:1:0: [sdb] 40021632 512-byte logical blocks: (20.5 GB/19.1 GiB)
May 24 06:22:55 rigel kernel: [ 16.423953] sd 0:0:1:0: [sdb] Write Protect is off
May 24 06:22:55 rigel kernel: [ 16.423969] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
May 24 06:22:55 rigel kernel: [ 16.424127] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 24 06:22:55 rigel kernel: [ 16.461124] sdb: sdb1
May 24 06:22:55 rigel kernel: [ 16.518404] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
May 24 06:22:55 rigel kernel: [ 16.520065] sd 0:0:1:0: [sdb] Attached SCSI disk
May 24 06:22:55 rigel kernel: [ 16.523962] sd 0:0:0:0: [sda] Attached SCSI disk
May 24 06:22:55 rigel kernel: [ 16.528493] sd 1:0:1:0: [sdc] Attached SCSI removable disk
May 24 06:22:55 rigel kernel: [ 16.530015] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
May 24 06:22:55 rigel kernel: [ 16.530027] cdrom: Uniform CD-ROM driver Revision: 3.20
May 24 06:22:55 rigel kernel: [ 16.532138] sr 1:0:0:0: Attached scsi CD-ROM sr0
May 24 06:22:55 rigel kernel: [ 16.574252] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
May 24 06:22:55 rigel kernel: [ 17.550351] random: crng init done
May 24 06:22:55 rigel kernel: [ 20.883674] PM: Image not found (code -22)
May 24 06:22:55 rigel kernel: [ 21.506793] cryptd: max_cpu_qlen set to 1000
May 24 06:22:55 rigel kernel: [ 21.910485] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem
May 24 06:22:55 rigel kernel: [ 21.937164] EXT4-fs (sda6): mounted filesystem without journal. Opts: (null)
May 24 06:22:55 rigel kernel: [ 36.470849] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
May 24 06:22:55 rigel kernel: [ 37.665854] lp: driver loaded but no devices found
May 24 06:22:55 rigel kernel: [ 37.919547] ppdev: user-space parallel port driver
May 24 06:22:55 rigel kernel: [ 38.104702] parport_pc 00:06: reported by Plug and Play ACPI
May 24 06:22:55 rigel kernel: [ 38.105000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
May 24 06:22:55 rigel kernel: [ 38.199621] lp0: using parport0 (interrupt-driven).
May 24 06:22:55 rigel kernel: [ 38.636234] pnp 01:01.00: [io 0x0280-0x029f]
May 24 06:22:55 rigel kernel: [ 38.636371] pnp 01:01.00: [irq 5]
May 24 06:22:55 rigel kernel: [ 38.638575] pnp 01:01.00: activated
May 24 06:22:55 rigel kernel: [ 38.638595] ne ne.0 (unnamed net_device) (uninitialized): ne.c: ISAPnP reports Generic PNP at i/o 0x280, irq 5.
May 24 06:22:55 rigel kernel: [ 38.638633] ne ne.0 (unnamed net_device) (uninitialized): NE*000 ethercard probe at 0x280:
May 24 06:22:55 rigel kernel: [ 38.638745] 00:80:ad:74:23:8f
May 24 06:22:55 rigel kernel: [ 38.663186] ne ne.0 eth0: NE2000 found at 0x280, using IRQ 5.
May 24 06:22:55 rigel kernel: [ 40.016419] RPC: Registered named UNIX socket transport module.
May 24 06:22:55 rigel kernel: [ 40.016431] RPC: Registered udp transport module.
May 24 06:22:55 rigel kernel: [ 40.016437] RPC: Registered tcp transport module.
May 24 06:22:55 rigel kernel: [ 40.016442] RPC: Registered tcp NFSv4.1 backchannel transport module.
May 24 06:22:55 rigel kernel: [ 40.475104] print_req_error: I/O error, dev fd0, sector 0
May 24 06:22:55 rigel kernel: [ 40.475194] floppy: error 10 while reading block 0
May 24 06:22:55 rigel kernel: [ 41.426471] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
May 24 06:22:55 rigel kernel: [ 43.913479] input: PC Speaker as /devices/platform/pcspkr/input/input4
May 24 06:22:55 rigel kernel: [ 44.716347] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 24 06:22:55 rigel kernel: [ 44.723229] sd 0:0:1:0: Attached scsi generic sg1 type 0
May 24 06:22:55 rigel kernel: [ 44.723660] sr 1:0:0:0: Attached scsi generic sg2 type 5
May 24 06:22:55 rigel kernel: [ 44.727848] sd 1:0:1:0: Attached scsi generic sg3 type 0
May 24 06:22:55 rigel kernel: [ 48.301726] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
May 24 06:22:55 rigel kernel: [ 48.597780] EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
May 24 06:22:55 rigel kernel: [ 48.709642] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
May 24 06:22:55 rigel kernel: [ 49.789887] EXT4-fs (sda7): mounting ext2 file system using the ext4 subsystem
May 24 06:22:55 rigel kernel: [ 50.380676] EXT4-fs (sda7): warning: mounting unchecked fs, running e2fsck is recommended
May 24 06:22:55 rigel kernel: [ 50.415756] EXT4-fs (sda7): mounted filesystem without journal. Opts: (null)
May 24 06:22:55 rigel kernel: [ 50.773614] Adding 200776k swap on /dev/sda5. Priority:-2 extents:1 across:200776k FS
May 24 06:22:55 rigel kernel: [ 55.800068] audit: type=1400 audit(1590294170.346:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=282 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.800111] audit: type=1400 audit(1590294170.346:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=282 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.800141] audit: type=1400 audit(1590294170.346:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=282 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.800180] audit: type=1400 audit(1590294170.346:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=282 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.800210] audit: type=1400 audit(1590294170.346:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=282 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.941630] audit: type=1400 audit(1590294170.486:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session" pid=284 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 55.941675] audit: type=1400 audit(1590294170.486:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=284 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 56.085903] audit: type=1400 audit(1590294170.630:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=285 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 56.085948] audit: type=1400 audit(1590294170.630:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=285 comm="apparmor_parser"
May 24 06:22:55 rigel kernel: [ 56.085980] audit: type=1400 audit(1590294170.630:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=285 comm="apparmor_parser"
May 24 06:23:05 rigel kernel: [ 71.324507] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
May 24 06:23:06 rigel kernel: [ 71.455993] NFSD: starting 90-second grace period (net f0000098)
May 24 06:10:52 rigel kernel: [ 349.482991] EXT4-fs (sdb1): error count since last fsck: 6
May 24 06:10:52 rigel kernel: [ 349.483012] EXT4-fs (sdb1): initial error at time 1562876319: ext4_wait_block_bitmap:503
May 24 06:10:52 rigel kernel: [ 349.483026] EXT4-fs (sdb1): last error at time 1562911499: ext4_wait_block_bitmap:503
May 24 06:43:14 rigel kernel: [ 2291.991123] usb 1-2: reset full-speed USB device number 2 using uhci_hcd
May 24 06:58:41 rigel kernel: [ 3219.047305] usb 1-2: USB disconnect, device number 2
May 24 06:58:56 rigel kernel: [ 3234.223046] usb 1-1: new full-speed USB device number 3 using uhci_hcd
May 24 06:58:57 rigel kernel: [ 3234.411093] usb 1-1: New USB device found, idVendor=04a9, idProduct=2204, bcdDevice= 0.01
May 24 06:58:57 rigel kernel: [ 3234.411113] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=0
May 24 06:58:57 rigel kernel: [ 3234.411125] usb 1-1: Product: CanoScan FB630U
May 24 06:59:25 rigel kernel: [ 3263.215049] usb 1-2: new full-speed USB device number 4 using uhci_hcd
May 24 06:59:26 rigel kernel: [ 3263.351042] usb 1-2: device descriptor read/64, error -71
May 24 06:59:26 rigel kernel: [ 3263.599034] usb 1-2: device descriptor read/64, error -84
May 24 06:59:26 rigel kernel: [ 3263.835040] usb 1-2: new full-speed USB device number 5 using uhci_hcd
May 24 06:59:26 rigel kernel: [ 3263.975039] usb 1-2: device descriptor read/64, error -71
May 24 06:59:26 rigel kernel: [ 3264.223040] usb 1-2: device descriptor read/64, error -71
May 24 06:59:27 rigel kernel: [ 3264.331136] usb usb1-port2: attempt power cycle
May 24 06:59:27 rigel kernel: [ 3264.775037] usb 1-2: new full-speed USB device number 6 using uhci_hcd
May 24 06:59:27 rigel kernel: [ 3265.199048] usb 1-2: device not accepting address 6, error -84
May 24 06:59:28 rigel kernel: [ 3265.327037] usb 1-2: new full-speed USB device number 7 using uhci_hcd
May 24 06:59:28 rigel kernel: [ 3265.747037] usb 1-2: device not accepting address 7, error -84
May 24 06:59:28 rigel kernel: [ 3265.747167] usb usb1-port2: unable to enumerate USB device
May 24 07:05:45 rigel kernel: [ 3642.407046] usb 1-2: new full-speed USB device number 8 using uhci_hcd
May 24 07:05:45 rigel kernel: [ 3642.551072] usb 1-2: device descriptor read/64, error -71
May 24 07:05:45 rigel kernel: [ 3642.799196] usb 1-2: device descriptor read/64, error -71
May 24 07:05:45 rigel kernel: [ 3643.035036] usb 1-2: new full-speed USB device number 9 using uhci_hcd
May 24 07:05:45 rigel kernel: [ 3643.175054] usb 1-2: device descriptor read/64, error -71
May 24 07:05:46 rigel kernel: [ 3643.423040] usb 1-2: device descriptor read/64, error -84
May 24 07:05:46 rigel kernel: [ 3643.531141] usb usb1-port2: attempt power cycle
May 24 07:05:46 rigel kernel: [ 3643.975040] usb 1-2: new full-speed USB device number 10 using uhci_hcd
May 24 07:05:47 rigel kernel: [ 3644.275100] usb 1-2: New USB device found, idVendor=13fe, idProduct=4100, bcdDevice= 1.00
May 24 07:05:47 rigel kernel: [ 3644.275120] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 24 07:05:47 rigel kernel: [ 3644.275132] usb 1-2: Product: USB DISK 2.0
May 24 07:05:47 rigel kernel: [ 3644.275143] usb 1-2: Manufacturer:
May 24 07:05:47 rigel kernel: [ 3644.723860] usb-storage 1-2:1.0: USB Mass Storage device detected
May 24 07:05:47 rigel kernel: [ 3644.748043] scsi host2: usb-storage 1-2:1.0
May 24 07:05:47 rigel kernel: [ 3644.748963] usbcore: registered new interface driver usb-storage
May 24 07:05:47 rigel kernel: [ 3644.823189] usbcore: registered new interface driver uas
May 24 07:05:48 rigel kernel: [ 3645.903049] usb 1-2: reset full-speed USB device number 10 using uhci_hcd
May 24 07:05:48 rigel kernel: [ 3646.039085] usb 1-2: device descriptor read/64, error -71
May 24 07:05:49 rigel kernel: [ 3646.287044] usb 1-2: device descriptor read/64, error -71
May 24 07:05:49 rigel kernel: [ 3646.523045] usb 1-2: reset full-speed USB device number 10 using uhci_hcd
May 24 07:05:49 rigel kernel: [ 3647.079043] usb 1-2: device not accepting address 10, error -71
May 24 07:05:49 rigel kernel: [ 3647.207050] usb 1-2: reset full-speed USB device number 10 using uhci_hcd
May 24 07:05:50 rigel kernel: [ 3647.623043] usb 1-2: device not accepting address 10, error -71
May 24 07:05:50 rigel kernel: [ 3647.751034] usb 1-2: reset full-speed USB device number 10 using uhci_hcd
May 24 07:05:50 rigel kernel: [ 3648.175035] usb 1-2: device not accepting address 10, error -84
May 24 07:05:50 rigel kernel: [ 3648.175454] usb 1-2: USB disconnect, device number 10
May 24 07:05:51 rigel kernel: [ 3648.331037] usb 1-2: new full-speed USB device number 11 using uhci_hcd
May 24 07:05:51 rigel kernel: [ 3648.475065] usb 1-2: device descriptor read/64, error -84
May 24 07:05:51 rigel kernel: [ 3648.723045] usb 1-2: device descriptor read/64, error -71
May 24 07:05:51 rigel kernel: [ 3648.959043] usb 1-2: new full-speed USB device number 12 using uhci_hcd
May 24 07:05:51 rigel kernel: [ 3649.099058] usb 1-2: device descriptor read/64, error -71
May 24 07:05:52 rigel kernel: [ 3649.343039] usb 1-2: device descriptor read/64, error -71
May 24 07:05:52 rigel kernel: [ 3649.451138] usb usb1-port2: attempt power cycle
May 24 07:05:52 rigel kernel: [ 3649.895039] usb 1-2: new full-speed USB device number 13 using uhci_hcd
May 24 07:05:52 rigel kernel: [ 3650.143099] usb 1-2: device descriptor read/8, error -71
May 24 07:05:53 rigel kernel: [ 3650.292113] usb 1-2: device descriptor read/8, error -84
May 24 07:05:53 rigel kernel: [ 3650.527047] usb 1-2: new full-speed USB device number 14 using uhci_hcd
May 24 07:05:53 rigel kernel: [ 3650.951040] usb 1-2: device not accepting address 14, error -71
May 24 07:05:53 rigel kernel: [ 3650.951208] usb usb1-port2: unable to enumerate USB device
May 24 07:08:37 rigel kernel: [ 3814.495252] usb 1-1: USB disconnect, device number 3
May 24 07:09:09 rigel kernel: [ 3846.795040] usb 1-2: new full-speed USB device number 15 using uhci_hcd
May 24 07:09:09 rigel kernel: [ 3846.943063] usb 1-2: device descriptor read/64, error -84
May 24 07:09:09 rigel kernel: [ 3847.195042] usb 1-2: device descriptor read/64, error -71
May 24 07:09:10 rigel kernel: [ 3847.431037] usb 1-2: new full-speed USB device number 16 using uhci_hcd
May 24 07:09:10 rigel kernel: [ 3847.571050] usb 1-2: device descriptor read/64, error -71
May 24 07:09:10 rigel kernel: [ 3847.819051] usb 1-2: device descriptor read/64, error -84
May 24 07:09:10 rigel kernel: [ 3847.927144] usb usb1-port2: attempt power cycle
May 24 07:09:11 rigel kernel: [ 3848.371027] usb 1-2: new full-speed USB device number 17 using uhci_hcd
May 24 07:09:11 rigel kernel: [ 3848.791066] usb 1-2: device not accepting address 17, error -84
May 24 07:09:11 rigel kernel: [ 3848.919041] usb 1-2: new full-speed USB device number 18 using uhci_hcd
May 24 07:09:11 rigel kernel: [ 3849.197720] usb 1-2: New USB device found, idVendor=13fe, idProduct=4100, bcdDevice= 1.00
May 24 07:09:11 rigel kernel: [ 3849.197741] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 24 07:09:11 rigel kernel: [ 3849.197753] usb 1-2: Product: USB DISK 2.0
May 24 07:09:11 rigel kernel: [ 3849.197764] usb 1-2: Manufacturer:
May 24 07:09:11 rigel kernel: [ 3849.197775] usb 1-2: SerialNumber: 1211280053009E81
May 24 07:09:11 rigel kernel: [ 3849.210160] usb-storage 1-2:1.0: USB Mass Storage device detected
May 24 07:09:11 rigel kernel: [ 3849.223696] scsi host2: usb-storage 1-2:1.0
May 24 07:09:13 rigel kernel: [ 3850.288752] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
May 24 07:09:13 rigel kernel: [ 3850.303490] sd 2:0:0:0: Attached scsi generic sg4 type 0
May 24 07:09:14 rigel kernel: [ 3851.552498] sd 2:0:0:0: [sdd] 15265792 512-byte logical blocks: (7.82 GB/7.28 GiB)
May 24 07:09:14 rigel kernel: [ 3851.561443] sd 2:0:0:0: [sdd] Write Protect is off
May 24 07:09:14 rigel kernel: [ 3851.561464] sd 2:0:0:0: [sdd] Mode Sense: 23 00 00 00
May 24 07:09:14 rigel kernel: [ 3851.565392] sd 2:0:0:0: [sdd] No Caching mode page found
May 24 07:09:14 rigel kernel: [ 3851.565425] sd 2:0:0:0: [sdd] Assuming drive cache: write through
May 24 07:09:14 rigel kernel: [ 3851.601819] sdd: sdd1
May 24 07:09:14 rigel kernel: [ 3851.626407] sd 2:0:0:0: [sdd] Attached SCSI removable disk
May 24 07:09:43 rigel kernel: [ 3881.201543] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
May 24 07:12:17 rigel kernel: [ 4034.247051] usb 1-1: new full-speed USB device number 19 using uhci_hcd
May 24 07:12:17 rigel kernel: [ 4034.435004] usb 1-1: New USB device found, idVendor=04a9, idProduct=2204, bcdDevice= 0.01
May 24 07:12:17 rigel kernel: [ 4034.435023] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=0
May 24 07:12:17 rigel kernel: [ 4034.435035] usb 1-1: Product: CanoScan FB630U
May 24 07:23:29 rigel kernel: [ 4707.023130] usb 1-1: reset full-speed USB device number 19 using uhci_hcd
May 24 07:30:20 rigel kernel: [ 5117.239318] usb 1-1: USB disconnect, device number 19
May 24 08:45:53 rigel kernel: [ 9650.703047] usb 1-1: new full-speed USB device number 20 using uhci_hcd
May 24 08:45:53 rigel kernel: [ 9650.890310] usb 1-1: New USB device found, idVendor=04a9, idProduct=2204, bcdDevice= 0.01
May 24 08:45:53 rigel kernel: [ 9650.890330] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=0
May 24 08:45:53 rigel kernel: [ 9650.890342] usb 1-1: Product: CanoScan FB630U
May 24 08:55:24 rigel kernel: [10222.011126] usb 1-1: reset full-speed USB device number 20 using uhci_hcd
May 24 08:59:09 rigel kernel: [10446.699120] usb 1-1: reset full-speed USB device number 20 using uhci_hcd
May 24 09:00:18 rigel kernel: [10515.303128] usb 1-1: reset full-speed USB device number 20 using uhci_hcd
--- End Message ---