--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.5.0-2-amd64: Amdgpu / drm: No video signal/blank screen on resume from suspend
- From: Facundo Gaich <facugaich@gmail.com>
- Date: Wed, 22 Apr 2020 18:22:08 -0300
- Message-id: <158759052822.7557.726653403986765198.reportbug@fgserv.fgserv>
Package: src:linux
Version: 5.5.17-1
Severity: normal
Tags: upstream,fixed-in-experimental
Dear Maintainer,
This is a tracking bug for kernel bug #206575 (https://bugzilla.kernel.org/show_bug.cgi?id=206575), which is fixed in experimental.
The problem occurs when using AMD graphic cards and amdgpu driver, after doing a
suspend-to-ram and resuming, the monitor/screen will stay blank or show
no signal.
This problem is fixed with the kernel in linux-image-5.6.0-trunk-amd64:5.6.4-1~exp1
Regards,
Facundo
-- Package-specific info:
** Version:
Linux version 5.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP Debian 5.5.17-1 (2020-04-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.5.0-2-amd64 root=UUID=ac43c144-ff3f-4c08-b24e-b9d76e3d66e2 ro loglevel=8
** Not tainted
** Kernel log:
[ 4.213896] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.215770] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[ 4.217432] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.242801] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 4.244655] EDAC amd64: F15h detected (node 0).
[ 4.244673] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 4.248111] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.248174] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 4.252407] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 4.254110] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 4.254247] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input24
[ 4.254310] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input25
[ 4.254375] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input26
[ 4.258773] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 4.276583] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 4.283634] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 4.283712] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 4.283785] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.283803] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.283834] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 4.283875] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 4.285483] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 4.285603] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 4.285678] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 4.285747] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.285766] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.285794] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 4.285821] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 4.299166] EDAC amd64: F15h detected (node 0).
[ 4.299200] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.348820] EDAC amd64: F15h detected (node 0).
[ 4.350210] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.353475] systemd[1]: Started Journal Service.
[ 4.364948] systemd-journald[372]: Received client request to flush runtime journal.
[ 4.389300] EDAC amd64: F15h detected (node 0).
[ 4.392728] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.441325] EDAC amd64: F15h detected (node 0).
[ 4.444675] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.693311] EDAC amd64: F15h detected (node 0).
[ 4.696690] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.428318] random: crng init done
[ 5.430722] random: 7 urandom warning(s) missed due to ratelimiting
[ 17.615174] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 17.662418] audit: type=1400 audit(1587587166.554:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=558 comm="apparmor_parser"
[ 17.664032] audit: type=1400 audit(1587587166.554:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=560 comm="apparmor_parser"
[ 17.666656] audit: type=1400 audit(1587587166.554:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=560 comm="apparmor_parser"
[ 17.666698] audit: type=1400 audit(1587587166.558:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=562 comm="apparmor_parser"
[ 17.674131] audit: type=1400 audit(1587587166.566:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=563 comm="apparmor_parser"
[ 17.674134] audit: type=1400 audit(1587587166.566:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=563 comm="apparmor_parser"
[ 17.674137] audit: type=1400 audit(1587587166.566:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=563 comm="apparmor_parser"
[ 17.678576] audit: type=1400 audit(1587587166.574:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=568 comm="apparmor_parser"
[ 17.681887] audit: type=1400 audit(1587587166.574:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=561 comm="apparmor_parser"
[ 17.683414] audit: type=1400 audit(1587587166.574:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=561 comm="apparmor_parser"
[ 19.020603] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[ 19.021878] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 19.241965] r8169 0000:02:00.0 enp2s0: Link is Down
[ 21.355094] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off
[ 21.358016] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 22.027114] fuse: init (API version 7.31)
[ 22.535980] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 22.537745] Bridge firewalling registered
[ 22.750753] Initializing XFRM netlink socket
[ 23.046984] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state
[ 23.046989] br-a26e2865e9c8: port 1(veth15f07a5) entered disabled state
[ 23.048410] device veth15f07a5 entered promiscuous mode
[ 23.048788] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state
[ 23.048791] br-a26e2865e9c8: port 1(veth15f07a5) entered forwarding state
[ 23.048813] IPv6: ADDRCONF(NETDEV_CHANGE): br-a26e2865e9c8: link becomes ready
[ 23.048944] br-a26e2865e9c8: port 1(veth15f07a5) entered disabled state
[ 23.112872] br-a26e2865e9c8: port 2(veth564478f) entered blocking state
[ 23.112877] br-a26e2865e9c8: port 2(veth564478f) entered disabled state
[ 23.112954] device veth564478f entered promiscuous mode
[ 23.113039] br-a26e2865e9c8: port 2(veth564478f) entered blocking state
[ 23.113041] br-a26e2865e9c8: port 2(veth564478f) entered forwarding state
[ 23.800410] br-a26e2865e9c8: port 2(veth564478f) entered disabled state
[ 23.912851] eth0: renamed from veth690f304
[ 23.942323] eth0: renamed from vethf078a25
[ 23.965246] IPv6: ADDRCONF(NETDEV_CHANGE): veth15f07a5: link becomes ready
[ 23.965289] br-a26e2865e9c8: port 1(veth15f07a5) entered blocking state
[ 23.965291] br-a26e2865e9c8: port 1(veth15f07a5) entered forwarding state
[ 23.965337] IPv6: ADDRCONF(NETDEV_CHANGE): veth564478f: link becomes ready
[ 23.965355] br-a26e2865e9c8: port 2(veth564478f) entered blocking state
[ 23.965357] br-a26e2865e9c8: port 2(veth564478f) entered forwarding state
[ 25.167259] rfkill: input handler disabled
[ 29.975591] rfkill: input handler enabled
[ 33.739683] rfkill: input handler disabled
[ 97.263702] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 97.280232] JFS: nTxBlock = 8192, nTxLock = 65536
[ 97.316686] QNX4 filesystem 0.2.3 registered.
[ 97.404058] raid6: sse2x4 gen() 8665 MB/s
[ 97.472051] raid6: sse2x4 xor() 4640 MB/s
[ 97.540045] raid6: sse2x2 gen() 6773 MB/s
[ 97.608046] raid6: sse2x2 xor() 4398 MB/s
[ 97.676039] raid6: sse2x1 gen() 5256 MB/s
[ 97.744034] raid6: sse2x1 xor() 3461 MB/s
[ 97.744037] raid6: using algorithm sse2x4 gen() 8665 MB/s
[ 97.744038] raid6: .... xor() 4640 MB/s, rmw enabled
[ 97.744040] raid6: using ssse3x2 recovery algorithm
[ 97.752565] xor: automatically using best checksumming function avx
[ 97.837111] Btrfs loaded, crc32c=crc32c-intel
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2501
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A97 R2.0
board_version: Rev 1.xx
** Loaded modules:
btrfs
blake2b_generic
xor
zstd_compress
raid6_pq
zstd_decompress
ufs
qnx4
hfsplus
hfs
minix
msdos
jfs
xfs
xt_nat
xt_tcpudp
veth
xt_conntrack
xt_MASQUERADE
nf_conntrack_netlink
xfrm_user
xfrm_algo
nft_counter
xt_addrtype
nft_compat
nft_chain_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nf_tables
nfnetlink
br_netfilter
bridge
stp
llc
fuse
overlay
binfmt_misc
dm_crypt
nls_ascii
edac_mce_amd
nls_cp437
snd_hda_codec_realtek
snd_hda_codec_generic
ledtrig_audio
snd_hda_codec_hdmi
vfat
fat
kvm_amd
dm_mod
snd_hda_intel
ccp
snd_intel_dspcfg
rng_core
kvm
joydev
efi_pstore
snd_hda_codec
eeepc_wmi
asus_wmi
battery
snd_hda_core
sparse_keymap
irqbypass
rfkill
snd_hwdep
video
snd_pcm
sp5100_tco
snd_timer
wmi_bmof
efivars
k10temp
watchdog
sg
fam15h_power
pcspkr
snd
soundcore
evdev
acpi_cpufreq
ecryptfs
parport_pc
ppdev
lp
parport
sunrpc
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
sd_mod
ohci_pci
amdgpu
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
mxm_wmi
gpu_sched
i2c_algo_bit
ttm
aesni_intel
drm_kms_helper
crypto_simd
cryptd
ahci
glue_helper
xhci_pci
libahci
ohci_hcd
xhci_hcd
drm
ehci_pci
ehci_hcd
libata
i2c_piix4
usbcore
r8169
scsi_mod
realtek
libphy
usb_common
mfd_core
wmi
button
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16] (prog-if 00 [Normal decode])
DeviceName: Onboard IGD
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fea00000-feafffff [size=1M]
Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff [size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: 00000000d0300000-00000000d03fffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: fe900000-fe9fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3) [1002:5a1b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: fe800000-fe8fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M5A99X EVO (R1.0) SB950 [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
NUMA node: 0
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) [1043:8444]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
NUMA node: 0
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Tonga PRO [Radeon R9 285/380] [1002:6939] (rev f1) (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Radeon R9 380 Nitro 4G D5 [174b:e308]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
NUMA node: 0
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at fea00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tonga HDMI Audio [Radeon R9 285/380] [1002:aad8]
Subsystem: PC Partner Limited / Sapphire Technology Radeon R9 285/380 HDMI Audio [174b:aad8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 51
NUMA node: 0
Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0304000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0300000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
NUMA node: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
NUMA node: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 008 Device 002: ID 046d:c085 Logitech, Inc. G Pro Gaming Mouse
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.5.0-2-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.5.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.136
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.5.0-2-amd64 recommends:
ii apparmor 2.13.4-1+b1
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.5.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-6
pn linux-doc-5.5 <none>
Versions of packages linux-image-5.5.0-2-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190717-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---