Your message dated Fri, 17 Jan 2025 17:48:40 +0100 with message-id <y3l7v57vrohobxrjqourve3prhog6okut3yyrze6jt4vrqwo2a@hpixout75ugv> and subject line Re: Bug#830303: sdhci_pci: SD card reader gives error "mmc0: error -110 whilst initialising SD card" has caused the Debian Bug report #830303, regarding sdhci_pci: SD card reader gives error "mmc0: error -110 whilst initialising SD card" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 830303: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=830303 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: sdhci_pci: SD card reader gives error "mmc0: error -110 whilst initialising SD card"
- From: J Mo <jmomo@jmomo.net>
- Date: Thu, 07 Jul 2016 18:22:02 -0700
- Message-id: <146794092275.3103.13666629430228033997.reportbug@cine.lan>
Package: src:linux Version: 4.6.2-1 Severity: normal I have a Zotac ZBox Nano CI320 (Intel N2930), which has a built-in SD card reader. However, it doesn't seem to be working. I get the following dmesg errors when I insert a card: Jul 07 17:21:06.417263 hostname kernel: mmc0: error -110 whilst initialising SD card Jul 07 17:21:06.521245 hostname kernel: mmc0: error -110 whilst initialising SD card Jul 07 17:21:06.658049 hostname kernel: mmc0: error -110 whilst initialising SD card Jul 07 17:21:06.805167 hostname kernel: mmc0: error -110 whilst initialising SD card Multiple known-good cards tested, all working in other systems. This is what lspci says about the reader device: 00:12.0 SD Host controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SDIO Controller (rev 0e) (prog-if 01) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series SDIO ControllerDisINTx- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18bit, non-prefetchable) [size=4K] Region 0: Memory at d0817000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at d0816000 (32-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3t=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sdhci-pci Kernel modules: sdhci_pci I googled around and found a very large number of similar bugs on similar hardware (mostly laptops). I suspect this is a driver problem. -- Package-specific info: ** Version: Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-4) ) #1 SMP Debian 4.6.2-1 (2016-06-15) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=50ba5b42-6270-4d9f-5d9c-b7f9a121b0bd ro ipv6.disable=1 quiet ** Tainted: E (8192) * Unsigned module has been loaded (currently expected). ** Kernel log: [574755.247043] mmc0: error -110 whilst initialising SD card [574755.368245] mmc0: error -110 whilst initialising SD card [574755.502021] mmc0: error -110 whilst initialising SD card [574755.652246] mmc0: error -110 whilst initialising SD card ** Model information sys_vendor: Motherboard by ZOTAC product_name: ZBOX-CI320NANO series product_version: Rev.00 chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: B219P026 board_vendor: ZOTAC board_name: ZBOX-CI320NANO series board_version: Rev.00 ** Loaded modules: lp(E) parport_pc(E) joydev(E) st(E) sr_mod(E) cdrom(E) ppdev(E) parport(E) xt_multiport(E) iptable_filter(E) ip_tables(E) x_tables(E) hmac(E) drbg(E) ansi_cprng(E) ctr(E) ccm(E) bridge(E) stp(E) llc(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) nfs(E) lockd(E) grace(E) fscache(E) sunrpc(E) binfmt_misc(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) arc4(E) iwlmvm(E) intel_rapl(E) uvcvideo(E) intel_soc_dts_iosf(E) intel_powerclamp(E) videobuf2_vmalloc(E) videobuf2_memops(E) kvm_intel(E) videobuf2_v4l2(E) snd_usb_audio(E) i915(E) videobuf2_core(E) snd_usbmidi_lib(E) videodev(E) uas(E) iTCO_wdt(E) snd_rawmidi(E) mac80211(E) iwlwifi(E) cfg80211(E) media(E) iTCO_vendor_support(E) usb_storage(E) snd_seq_device(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) evdev(E) ghash_clmulni_intel(E) btusb(E) sg(E) drm_kms_helper(E) btrtl(E) pcspkr(E) serio_raw(E) drm(E) hci_uart(E) snd_intel_sst_acpi(E) snd_intel_sst_core(E) video(E) btbcm(E) btqca(E) snd_soc_sst_mfld_platform(E) snd_soc_rt5640(E) dw_dmac(E) ir_lirc_codec(E) lirc_dev(E) btintel(E) bluetooth(E) battery(E) rc_rc6_mce(E) nuvoton_cir(E) 8250_fintek(E) rfkill(E) rc_core(E) snd_soc_sst_match(E) snd_soc_rl6231(E) dw_dmac_core(E) snd_soc_core(E) shpchp(E) i2c_algo_bit(E) snd_hda_intel(E) lpc_ich(E) i2c_designware_platform(E) i2c_designware_core(E) i2c_i801(E) snd_hda_codec(E) mfd_core(E) snd_compress(E) snd_hda_core(E) snd_hwdep(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) button(E) tpm_tis(E) tpm(E) processor(E) nct6775(E) hwmon_vid(E) coretemp(E) autofs4(E) ext4(E) ecb(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E) aes_x86_64(E) crc16(E) jbd2(E) crc32c_generic(E) mbcache(E) md_mod(E) sd_mod(E) crc32c_intel(E) xhci_pci(E) psmouse(E) ahci(E) xhci_hcd(E) libahci(E) libata(E) usbcore(E) r8169(E) mii(E) scsi_mod(E) usb_common(E) sdhci_pci(E) fjes(E) i2c_hid(E) hid(E) sdhci_acpi(E) sdhci(E) mmc_core(E) ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [19da:b219] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) DeviceName: Onboard IGD Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series Graphics & Display [19da:b219] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 265 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 4: I/O ports at f080 [size=8] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:12.0 SD Host controller [0805]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SDIO Controller [8086:0f16] (rev 0e) (prog-if 01) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series SDIO Controller [19da:b219] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0817000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at d0816000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci_pci 00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0]) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor E3800 Series SATA AHCI Controller [19da:b219] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 262 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f020 [size=32] Region 5: Memory at d0815000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI]) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [19da:b219] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 263 Region 0: Memory at d0800000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [19da:b219] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at d0400000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [19da:b219] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 266 Region 0: Memory at d0810000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 [8086:0f48] (rev 0e) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: d0700000-d07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 [8086:0f4a] (rev 0e) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0600000-d06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 [8086:0f4e] (rev 0e) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx Series Power Control Unit [19da:b219] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus Controller [8086:0f12] (rev 0e) Subsystem: ZOTAC International (MCO) Ltd. Atom Processor E3800 Series SMBus Controller [19da:b219] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at d0814000 (32-bit, non-prefetchable) [size=32] Region 4: I/O ports at f000 [size=32] Capabilities: <access denied> Kernel modules: i2c_i801 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07) Subsystem: ZOTAC International (MCO) Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [19da:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 261 Region 0: I/O ports at e000 [size=256] Region 2: Memory at d0704000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0700000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3] (rev 83) Subsystem: Intel Corporation Dual Band Wireless-AC 3160 [8086:0070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 264 Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi ** USB devices: Bus 002 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 2109:2812 VIA Labs, Inc. VL812 Hub Bus 001 Device 002: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.6.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.125 ii kmod 22-1.1 ii linux-base 4.3 Versions of packages linux-image-4.6.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.6.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-36 pn linux-doc-4.6 <none> Versions of packages linux-image-4.6.0-1-amd64 is related to: ii firmware-amd-graphics 20160110-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20160110-1 pn firmware-libertas <none> ii firmware-linux-nonfree 20160110-1 ii firmware-misc-nonfree 20160110-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20160110-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Jmkr <jmkrnet@email.cz>, 830303-done@bugs.debian.org
- Subject: Re: Bug#830303: sdhci_pci: SD card reader gives error "mmc0: error -110 whilst initialising SD card"
- From: Uwe Kleine-König <ukleinek@debian.org>
- Date: Fri, 17 Jan 2025 17:48:40 +0100
- Message-id: <y3l7v57vrohobxrjqourve3prhog6okut3yyrze6jt4vrqwo2a@hpixout75ugv>
- In-reply-to: <[🔎] 69s.7Hnzb.7fGtAPeWJbZ.1dVj7E@seznam.cz>
- References: <146794092275.3103.13666629430228033997.reportbug@cine.lan> <[🔎] 69s.7Hnzb.7fGtAPeWJbZ.1dVj7E@seznam.cz>
Hello, On Wed, Jan 08, 2025 at 08:28:14PM +0100, Jmkr wrote: > Here is attached some more info about using the workaround mentioned above on Acer Aspire V3-571G with Broadcom Limited BCM57765/57785 card reader. > > Basically this card reader never really worked reliably for me on Debian even with the workaround. After attempting to write even relatively small amount of data to an SD card the reader usually quickly failed (reading was more usable, but sometimes failed too). Even with later kernels problems with the card reader were still there (probably even on Linux 6.1 from Debian 12, but I guess testing with current kernels could better confirm my vague memories:). > > Anyway as can be deduced from timestamps in the attachments: I am no longer using the laptop for Debian and I only wanted to share the info collected in 2022 in case it helps with debugging (as I gave up on solving this problem back then and forgot to share my collected info). Thanks for your input. Given it's not relevant for you any more and it's unknown if there are other affected users and this is still an issue in 2025, I close this bug. When the problem gets relevant again, please reopen (or report a new bug). Best regards UweAttachment: signature.asc
Description: PGP signature
--- End Message ---